Screen SFT DAB 600/C firmware 1.9.3 contains an authentication bypass vulnerability that allows attackers to change the admin password without requiring the current credentials. Attackers can exploit the userManager.cgx API endpoint by sending a crafted POST request with a new MD5-hashed password to directly modify the admin account's authentication.

Screen SFT DAB 600/C firmware 1.9.3 contains a session management vulnerability that allows attackers to bypass authentication controls by exploiting IP address session binding. Attackers can reuse the same IP address and issue unauthorized requests to the userManager API to change user passwords without proper authentication.

VMware Cloud Director Appliance contains an authentication bypass vulnerability in case VMware Cloud Director Appliance was upgraded to 10.5 from an older version. On an upgraded version of VMware Cloud Director Appliance 10.5, a malicious actor with network access to the appliance can bypass login restrictions when authenticating on port 22 (ssh) or port 5480 (appliance management console) . This bypass is not present on port 443 (VCD provider and tenant login). On a new installation of VMware Cloud Director Appliance 10.5, the bypass is not present. VMware Cloud Director Appliance is impacted since it uses an affected version of sssd from the underlying Photon OS. The sssd issue is no longer present in versions of Photon OS that ship with sssd-2.8.1-11 or higher (Photon OS 3) or sssd-2.8.2-9 or higher (Photon OS 4 and 5).

Screen SFT DAB 600/C Firmware 1.9.3 contains a session management vulnerability that allows attackers to bypass authentication controls by exploiting IP address session binding. Attackers can reuse the same IP address and issue unauthorized requests to the userManager API to remove user accounts without proper authentication.

ASUS Armoury Crate has a vulnerability in arbitrary file write and allows remote attackers to access or modify arbitrary files by sending specific HTTP requests without permission.

The Amp’ed RF BT-AP 111 Bluetooth access point's HTTP admin interface does not have an authentication feature, allowing unauthorized access to anyone with network access.

An issue in Planet Technologies WDRT-1800AX v1.01-CP21 allows attackers to bypass authentication and escalate privileges to root via manipulation of the LoginStatus cookie.

SOUND4 IMPACT/FIRST/PULSE/Eco v2.x contains an unauthenticated vulnerability in the /usr/cgi-bin/restorefactory.cgi endpoint that allows remote attackers to reset device configuration. Attackers can send a POST request to the endpoint with specific data to trigger a factory reset and bypass authentication, gaining full system control.

TSA developed by Changing has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to read, modify, and delete database contents.

The WooCommerce - Social Login plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 2.7.5. This is due to the use of loose comparison of the activation code in the 'woo_slg_confirm_email_user' function. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the userID. This requires the email module to be enabled.

By default, the Packet Power Monitoring and Control Web Interface do not enforce authentication mechanisms. This vulnerability could allow unauthorized users to access and manipulate monitoring and control functions.

Zoho ManageEngine ServiceDesk Plus before 11302 is vulnerable to authentication bypass that allows a few REST-API URLs without authentication.

MiniDVBLinux 5.4 contains an authentication bypass vulnerability that allows remote attackers to change the root password without authentication. Attackers can send crafted POST requests to the system setup endpoint with modified SYSTEM_PASSWORD parameters to reset root credentials.

Statistical Database System developed by Gotac has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to read, modify, and delete database contents with high-level privileges.

MiniDVBLinux 5.4 contains a remote code execution vulnerability in the SVDRP protocol that allows remote attackers to send commands to manipulate TV systems. Attackers can send crafted SVDRP commands through the svdrpsend.sh script to execute messages and potentially control the video disk recorder remotely.

The Custom MCPs feature is designed to execute OS commands, for instance, using tools like `npx` to spin up local MCP Servers. However, Flowise's inherent authentication and authorization model is minimal and lacks role-based access controls (RBAC). Furthermore, in Flowise versions before 3.0.1 the default installation operates without authentication unless explicitly configured. This combination allows unauthenticated network attackers to execute unsandboxed OS commands.

A missing authentication enforcement vulnerability exists in the mutual TLS (mTLS) implementation used by System REST APIs and SOAP services in multiple WSO2 products. Due to improper validation of client certificate–based authentication in certain default configurations, the affected components may permit unauthenticated requests even when mTLS is enabled. This condition occurs when relying on the default mTLS settings for System REST APIs or when the mTLS authenticator is enabled for SOAP services, causing these interfaces to accept requests without enforcing additional authentication. Successful exploitation allows a malicious actor with network access to the affected endpoints to gain administrative privileges and perform unauthorized operations. The vulnerability is exploitable only when the impacted mTLS flows are enabled and accessible in a given deployment. Other certificate-based authentication mechanisms such as Mutual TLS OAuth client authentication and X.509 login flows are not affected, and APIs served through the API Gateway of WSO2 API Manager remain unaffected.

Multiple vulnerabilities in Cisco Nexus Dashboard could allow an unauthenticated, remote attacker to execute arbitrary commands, read or upload container image files, or perform a cross-site request forgery attack. For more information about these vulnerabilities, see the Details section of this advisory.

WebITR developed by Uniong has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to log into the system as arbitrary users by exploiting a specific functionality.

mage-ai is an open-source data pipeline tool for transforming and integrating data. Those who use Mage starting in version 0.8.34 and prior to 0.8.72 with user authentication enabled may be affected by a vulnerability. The terminal could be accessed by users who are not signed in or do not have editor permissions. Version 0.8.72 contains a fix for this issue.

D-Link DIR-822+ V1.0.2 contains a login bypass in the HNAP1 interface, which allows attackers to log in to administrator accounts with empty passwords.

A remote unprivileged attacker can modify and access configuration settings on the EventCam App due to the absence of API authentication. The lack of authentication in the API allows the attacker to potentially compromise the functionality of the EventCam App.

The LatePoint plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 5.0.12. This is due to insufficient verification on the user being supplied during the booking customer step. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the user id. Note that logging in as a WordPress user is only possible if the "Use WordPress users as customers" setting is enabled, which is disabled by default. The vulnerability is partially patched in version 5.0.12 and fully patched in version 5.0.13.

Improper authentication vulnerability exists in KB-AHR series and KB-IRIP series. If this vulnerability is exploited, an arbitrary OS command may be executed on the product or the device settings may be altered. Affected products and versions are as follows: KB-AHR04D versions prior to 91110.1.101106.78, KB-AHR08D versions prior to 91210.1.101106.78, KB-AHR16D versions prior to 91310.1.101106.78, KB-IRIP04A versions prior to 95110.1.100290.78A, KB-IRIP08A versions prior to 95210.1.100290.78A, and KB-IRIP16A versions prior to 95310.1.100290.78A.

The product exposes a service that is intended for local only to all network interfaces without any authentication.

It is identified a vulnerability of insufficient authentication in the system configuration interface of Hitron Technologies CODA-5310. An unauthorized remote attacker can exploit this vulnerability to access system configuration interface, resulting in performing arbitrary system operation or disrupt service.

A vulnerability was found in harry0703 MoneyPrinterTurbo up to 1.2.6 and classified as critical. Affected by this issue is the function verify_token of the file app/controllers/base.py of the component API Endpoint. The manipulation leads to missing authentication. The attack may be launched remotely.

Missing Authentication for Critical Function, Improper Access Control vulnerability in Dinosoft Business Solutions Dinosoft ERP allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Dinosoft ERP: from < 3.0.1 through 11022026. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Insufficient input validation within GitLab Language Server 7.6.0 and later before 7.30.0 allows arbitrary GraphQL query execution

An issue was discovered in Echo ShareCare 8.15.5. It does not perform authentication or authorization checks when accessing a subset of sensitive resources, leading to the ability for unauthenticated users to access pages that are vulnerable to attacks such as SQL injection.

A CWE-306: Missing Authentication for Critical Function vulnerability exists that could allow changes to administrative credentials, leading to potential remote code execution without requiring prior authentication on the Java RMI interface.

Multiple Broken Authentication security issues exist in the affected product. The security issues are due to missing authentication checks on critical functions. These could result in potential denial-of-service, admin account takeover, or NAT rule modifications. Devices would no longer be able to communicate through NATR as a result of denial-of-service or NAT rule modifications. NAT rule modification could also result in device communication to incorrect endpoints. Admin account takeover could allow modification of configuration and require physical access to restore.

An issue was discovered in Heimdal Thor agent versions 3.4.2 and before on Windows and 2.6.9 and before on macOS, allows attackers to bypass network filtering, execute arbitrary code, and obtain sensitive information via DarkLayer Guard threat prevention module. NOTE: Heimdal disputes the validity of this issue arguing that their DNS Security for Endpoint filters DNS traffic on the endpoint by intercepting system-generated DNS requests. The product was not designed to intercept DNS requests from third-party solutions.

Moxa MiiNePort E1 has a vulnerability of insufficient access control. An unauthenticated remote user can exploit this vulnerability to perform arbitrary system operation or disrupt service.

upgrademysqlstatus in databases/views.py in CyberPanel (aka Cyber Panel) before 5b08cd6 allows remote attackers to bypass authentication and execute arbitrary commands via /dataBases/upgrademysqlstatus by bypassing secMiddleware (which is only for a POST request) and using shell metacharacters in the statusfile property, as exploited in the wild in October 2024 by PSAUX. Versions through 2.3.6 and (unpatched) 2.3.7 are affected.

The BookIt plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 2.3.7. This is due to insufficient verification on the user being supplied during booking an appointment through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email.

Array Networks Array AG Series and vxAG (9.4.0.481 and earlier) allow remote code execution. An attacker can browse the filesystem on the SSL VPN gateway using a flags attribute in an HTTP header without authentication. The product could then be exploited through a vulnerable URL. The 2023-03-09 vendor advisory stated "a new Array AG release with the fix will be available soon."

Vendor: The Apache Software Foundation Versions Affected: Apache OpenMeetings from 2.0.0 before 7.0.0 Description: Attacker can elevate their privileges in any room

A missing authentication for critical function in FortiManager 7.6.0, FortiManager 7.4.0 through 7.4.4, FortiManager 7.2.0 through 7.2.7, FortiManager 7.0.0 through 7.0.12, FortiManager 6.4.0 through 6.4.14, FortiManager 6.2.0 through 6.2.12, Fortinet FortiManager Cloud 7.4.1 through 7.4.4, FortiManager Cloud 7.2.1 through 7.2.7, FortiManager Cloud 7.0.1 through 7.0.12, FortiManager Cloud 6.4.1 through 6.4.7 allows attacker to execute arbitrary code or commands via specially crafted requests.

The User Email Verification for WooCommerce plugin for WordPress is vulnerable to authentication bypass via authenticate_user_by_email in versions up to, and including, 3.5.0. This is due to a random token generation weakness in the resend_verification_email function. This allows unauthenticated attackers to impersonate users and trigger an email address verification for arbitrary accounts, including administrative accounts, and automatically be logged in as that user, including any site administrators. This requires the Allow Automatic Login After Successful Verification setting to be enabled, which it is not by default.

Improper Authentication vulnerability in Abdul Hakeem Build App Online allows Privilege Escalation.This issue affects Build App Online: from n/a through 1.0.19.

Vulnerability in the Oracle Access Manager product of Oracle Fusion Middleware (component: OpenSSO Agent). Supported versions that are affected are 11.1.2.3.0, 12.2.1.3.0 and 12.2.1.4.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Access Manager. Successful attacks of this vulnerability can result in takeover of Oracle Access Manager. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H).

LightCMS v1.3.7 was discovered to contain a remote code execution (RCE) vulnerability via the image:make function.

A vulnerability has been identified in SPPA-T3000 Application Server (All versions < Service Pack R8.2 SP2). The AdminService is available without authentication on the Application Server. An attacker can use methods exposed via this interface to receive password hashes of other users and to change user passwords. Please note that an attacker needs to have access to the Application Highway in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

An issue in Quectel BC95-CNV V100R001C00SPC051 allows attackers to bypass authentication via a crafted NAS message.

In Progress MOVEit Transfer 11.1 before 11.1.3, a vulnerability has been found that could allow an attacker to sign in without full credentials via the SSH (SFTP) interface. The vulnerability affects only certain SSH (SFTP) configurations, and is applicable only if the MySQL database is being used.

Due to missing authentication and input sanitization of code the EventLogServiceCollector of SAP Diagnostics Agent - version 720, allows an attacker to execute malicious scripts on all connected Diagnostics Agents running on Windows. On successful exploitation, the attacker can completely compromise confidentiality, integrity and availability of the system.

The BP Social Connect plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 1.5. This is due to insufficient verification on the user being supplied during a Facebook login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email.

eQ-3 Homematic CCU2 2.47.20 and CCU3 3.47.18 with the HM-Print AddOn through 1.2a installed allow Remote Code Execution by unauthenticated attackers with access to the web interface via the exec.cgi and exec1.cgi scripts, which execute TCL script content from an HTTP POST request.