A vulnerability in the IKEv2 feature of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device that may also impact the availability of services to devices elsewhere in the network. This vulnerability is due to memory exhaustion caused by not freeing memory during IKEv2 packet processing. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to exhaust resources, causing a DoS condition that will eventually require the device to manually reload.

A vulnerability in the IPv4 protocol handling of Cisco StarOS could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a memory leak that occurs during packet processing. An attacker could exploit this vulnerability by sending a series of crafted IPv4 packets through an affected device. A successful exploit could allow the attacker to exhaust the available memory and cause an unexpected restart of the npusim process, leading to a DoS condition on the affected device.

A vulnerability in ICMP Version 6 (ICMPv6) processing in Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a slow system memory leak, which over time could lead to a denial of service (DoS) condition. This vulnerability is due to improper error handling when an IPv6-configured interface receives a specific type of ICMPv6 packet. An attacker could exploit this vulnerability by sending a sustained rate of crafted ICMPv6 packets to a local IPv6 address on a targeted device. A successful exploit could allow the attacker to cause a system memory leak in the ICMPv6 process on the device. As a result, the ICMPv6 process could run out of system memory and stop processing traffic. The device could then drop all ICMPv6 packets, causing traffic instability on the device. Restoring device functionality would require a device reboot.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) feature of Cisco IOS Software, IOS XE Software, Secure Firewall Adaptive Security Appliance (ASA) Software, and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition. This vulnerability is due to a lack of proper processing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. In the case of Cisco IOS and IOS XE Software, a successful exploit could allow the attacker to cause the device to reload unexpectedly. In the case of Cisco ASA and FTD Software, a successful exploit could allow the attacker to partially exhaust system memory, causing system instability such as being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition. This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending a continuous stream of crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to partially exhaust system memory, causing system instability like being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition. This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending a continuous stream of crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to partially exhaust system memory, causing system instability like being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition. This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending a continuous stream of crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to partially exhaust system memory, causing system instability like being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition.

Multiple Cisco products are affected by a vulnerability in the processing of DCE/RPC requests that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to leak sensitive information or to restart, resulting in an interruption of packet inspection. This vulnerability is due to an error in buffer handling logic when processing DCE/RPC requests, which can result in a buffer use-after-free read. An attacker could exploit this vulnerability by sending a large number of DCE/RPC requests through an established connection that is inspected by Snort 3. A successful exploit could allow the attacker to unexpectedly restart the Snort 3 Detection Engine, which could cause a denial of service (DoS).

Multiple Cisco products are affected by a vulnerability in the Snort 3 Detection Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection. This vulnerability is due to incomplete parsing of the SSL handshake ingress packets. An attacker could exploit this vulnerability by sending crafted SSL handshake packets. A successful exploit could allow the attacker to cause a denial of service (DoS) condition when the Snort 3 Detection Engine restarts unexpectedly.

Multiple Cisco products are affected by a vulnerability in the Snort 3 detection engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection. This vulnerability is due to incomplete error checking when parsing remote procedure call (RPC) data. An attacker could exploit this vulnerability by sending crafted RPC packets through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause a DoS condition when the Snort 3 Detection Engine unexpectedly restarts.

A vulnerability in the TLS cryptography functionality of the Snort 3 Detection Engine of Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to unexpectedly restart, resulting in a denial of service (DoS) condition. This vulnerability is due to improper implementation of the TLS protocol. An attacker could exploit this vulnerability by sending a crafted TLS packet to an affected system. A successful exploit could allow the attacker to cause a device that is running Cisco Secure FTD Software to drop network traffic, resulting in a DoS condition.  Note: TLS 1.3 is not affected by this vulnerability.

A vulnerability in the memory management handling for the Snort 3 Detection Engine of Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart. This vulnerability is due to a logic error in memory management when a device is performing Snort 3 SSL packet inspection. An attacker could exploit this vulnerability by sending crafted SSL packets through an established connection to be parsed by the Snort 3 Detection Engine. A successful exploit could allow the attacker to cause a denial of service (DoS) condition when the Snort 3 Detection Engine unexpectedly restarts.

Multiple Cisco products are affected by a vulnerability in the Snort 3 Detection Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection. This vulnerability is due to an error in the binder module initialization logic of the Snort Detection Engine. An attacker could exploit this vulnerability by sending certain packets through an established connection that is parsed by Snort 3. A successful exploit could allow the attacker to cause a DoS condition when the Snort 3 Detection Engine restarts unexpectedly.

Multiple Cisco products are affected by a vulnerability in the Snort 3 Detection Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection. This vulnerability is due to an error in the JSTokenizer normalization logic when the HTTP inspection normalizes JavaScript. An attacker could exploit this vulnerability by sending crafted HTTP packets through an established connection that is parsed by Snort 3. A successful exploit could allow the attacker to cause a DoS condition when the Snort 3 Detection Engine restarts unexpectedly. JSTokenizer is not enabled by default.

Multiple Cisco products are affected by a vulnerability in the Snort 3 detection engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection.  This vulnerability is due to incomplete error checking when parsing the Multicast DNS fields of the HTTP header. An attacker could exploit this vulnerability by sending crafted HTTP packets through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause a DoS condition when the Snort 3 Detection Engine unexpectedly restarts.

Multiple Cisco products are affected by vulnerabilities in the Snort 3 VBA feature that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to crash. These vulnerabilities are due to improper error checking when decompressing VBA data. An attacker could exploit these vulnerabilities by sending crafted VBA data to the Snort 3 Detection Engine on the targeted device. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to unexpectedly restart, causing a DoS condition.

Multiple Cisco products are affected by a vulnerability in the Snort 3 VBA feature that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to crash. This vulnerability is due to improper range checking when decompressing VBA data, which is user controlled. An attacker could exploit this vulnerability by sending crafted VBA data to the Snort 3 Detection Engine on the targeted device. A successful exploit could allow the attacker to cause an overflow of heap data, which could cause a DoS condition.

Multiple Cisco products are affected by a vulnerability in the Snort 3 VBA feature that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to crash.  This vulnerability is due to improper error checking when decompressing VBA data. An attacker could exploit this vulnerability by sending crafted VBA data to the Snort 3 Detection Engine on the targeted device. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to enter an infinite loop, causing a DoS condition.

Multiple Cisco products are affected by a vulnerability in the Snort 3 Visual Basic for Applications (VBA) feature which could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to crash.    This vulnerability is due to lack of proper error checking when decompressing VBA data. An attacker could exploit this vulnerability by sending a crafted VBA data to the Snort 3 Detection Engine on the targeted device. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to unexpectedly restart causing a a denial of service (DoS) condition.

A vulnerability in the networking component of Cisco access point (AP) software could allow an unauthenticated, remote attacker to cause a temporary disruption of service. This vulnerability is due to overuse of AP resources. An attacker could exploit this vulnerability by connecting to an AP on an affected device as a wireless client and sending a high rate of traffic over an extended period of time. A successful exploit could allow the attacker to cause the Datagram TLS (DTLS) session to tear down and reset, causing a denial of service (DoS) condition.

A vulnerability in the interaction between the Server Message Block (SMB) protocol preprocessor and the Snort 3 detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the configured policies or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper error-checking when the Snort 3 detection engine is processing SMB traffic. An attacker could exploit this vulnerability by sending a crafted SMB packet stream through an affected device. A successful exploit could allow the attacker to cause the Snort process to reload, resulting in a DoS condition.

A vulnerability in Address Resolution Protocol (ARP) management of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to prevent an affected device from resolving ARP entries for legitimate hosts on the connected subnets. This vulnerability exists because ARP entries are mismanaged. An attacker could exploit this vulnerability by continuously sending traffic that results in incomplete ARP entries. A successful exploit could allow the attacker to cause ARP requests on the device to be unsuccessful for legitimate hosts, resulting in a denial of service (DoS) condition.

A vulnerability in the Vector Packet Processor (VPP) of Cisco Packet Data Network Gateway (PGW) could allow an unauthenticated, remote attacker to stop ICMP traffic from being processed over an IPsec connection. This vulnerability is due to the VPP improperly handling a malformed packet. An attacker could exploit this vulnerability by sending a malformed Encapsulating Security Payload (ESP) packet over an IPsec connection. A successful exploit could allow the attacker to stop ICMP traffic over an IPsec connection and cause a denial of service (DoS).

A vulnerability in the IPsec packet processor of Cisco IOS XR Software could allow an unauthenticated remote attacker to cause a denial of service (DoS) condition for IPsec sessions to an affected device. The vulnerability is due to improper handling of packets by the IPsec packet processor. An attacker could exploit this vulnerability by sending malicious ICMP error messages to an affected device that get punted to the IPsec packet processor. A successful exploit could allow the attacker to deplete IPsec memory, resulting in all future IPsec packets to an affected device being dropped by the device. Manual intervention is required to recover from this situation.

A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to insufficient resource management while establishing SSL VPN sessions. An attacker could exploit this vulnerability by sending a series of crafted HTTPS requests to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to stop accepting new connections, preventing new SSL VPN connections from being established. Existing SSL VPN sessions are not impacted. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.

A vulnerability in the Remote Access VPN (RAVPN) service of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) of the RAVPN service. This vulnerability is due to resource exhaustion. An attacker could exploit this vulnerability by sending a large number of VPN authentication requests to an affected device. A successful exploit could allow the attacker to exhaust resources, resulting in a DoS of the RAVPN service on the affected device. Depending on the impact of the attack, a reload of the device may be required to restore the RAVPN service. Services that are not related to VPN are not affected. Cisco Talos discussed these attacks in the blog post Large-scale brute-force activity targeting VPNs, SSH services with commonly used login credentials.

A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition for targeted users of the AnyConnect service on an affected device. This vulnerability is due to insufficient entropy for handlers that are used during SSL VPN session establishment. An unauthenticated attacker could exploit this vulnerability by brute forcing valid session handlers. An authenticated attacker could exploit this vulnerability by connecting to the AnyConnect VPN service of an affected device to retrieve a valid session handler and, based on that handler, predict further valid session handlers. The attacker would then send a crafted HTTPS request using the brute-forced or predicted session handler to the AnyConnect VPN server of the device. A successful exploit could allow the attacker to terminate targeted SSL VPN sessions, forcing remote users to initiate new VPN connections and reauthenticate.

Multiple Cisco products are affected by a vulnerability in the rate filtering feature of the Snort detection engine that could allow an unauthenticated, remote attacker to bypass a configured rate limiting filter.  This vulnerability is due to an incorrect connection count comparison. An attacker could exploit this vulnerability by sending traffic through an affected device at a rate that exceeds a configured rate filter. A successful exploit could allow the attacker to successfully bypass the rate filter. This could allow unintended traffic to enter the network protected by the affected device.

Multiple vulnerabilities in the Server Message Block Version 2 (SMB2) processor of the Snort detection engine on multiple Cisco products could allow an unauthenticated, remote attacker to bypass the configured policies or cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to improper management of system resources when the Snort detection engine is processing SMB2 traffic. An attacker could exploit these vulnerabilities by sending a high rate of certain types of SMB2 packets through an affected device. A successful exploit could allow the attacker to trigger a reload of the Snort process, resulting in a DoS condition. Note: When the snort preserve-connection option is enabled for the Snort detection engine, a successful exploit could also allow the attacker to bypass the configured policies and deliver a malicious payload to the protected network. The snort preserve-connection setting is enabled by default. See the Details ["#details"] section of this advisory for more information. Note: Only products that have Snort 3 configured are affected. Products that are configured with Snort 2 are not affected.

A vulnerability in the interaction of SIP and Snort 3 for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the Snort 3 detection engine to restart. This vulnerability is due to a lack of error-checking when SIP bidirectional flows are being inspected by Snort 3. An attacker could exploit this vulnerability by sending a stream of crafted SIP traffic through an interface on the targeted device. A successful exploit could allow the attacker to trigger a restart of the Snort 3 process, resulting in a denial of service (DoS) condition.

Multiple vulnerabilities in the Server Message Block Version 2 (SMB2) processor of the Snort detection engine on multiple Cisco products could allow an unauthenticated, remote attacker to bypass the configured policies or cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to improper management of system resources when the Snort detection engine is processing SMB2 traffic. An attacker could exploit these vulnerabilities by sending a high rate of certain types of SMB2 packets through an affected device. A successful exploit could allow the attacker to trigger a reload of the Snort process, resulting in a DoS condition. Note: When the snort preserve-connection option is enabled for the Snort detection engine, a successful exploit could also allow the attacker to bypass the configured policies and deliver a malicious payload to the protected network. The snort preserve-connection setting is enabled by default. See the Details ["#details"] section of this advisory for more information. Note: Only products that have Snort 3 configured are affected. Products that are configured with Snort 2 are not affected.

A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. This vulnerability is due to insufficient resource management when establishing TLS/SSL sessions. An attacker could exploit this vulnerability by sending a series of crafted TLS/SSL messages to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to stop accepting new connections, preventing new SSL VPN connections from being established. Existing SSL VPN sessions are not impacted. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.

A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to hijack an AnyConnect VPN session or cause a denial of service (DoS) condition for individual users of the AnyConnect VPN service on an affected device. This vulnerability is due to weak entropy for handlers that are used during the VPN authentication process as well as a race condition that exists in the same process. An attacker could exploit this vulnerability by correctly guessing an authentication handler and then sending crafted HTTPS requests to an affected device. A successful exploit could allow the attacker to take over the AnyConnect VPN session from a target user or prevent the target user from establishing an AnyConnect VPN session with the affected device.

A vulnerability in the DHCP version 4 (DHCPv4) server feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to trigger a crash of the dhcpd process, resulting in a denial of service (DoS) condition. This vulnerability exists because certain DHCPv4 messages are improperly validated when they are processed by an affected device. An attacker could exploit this vulnerability by sending a malformed DHCPv4 message to an affected device. A successful exploit could allow the attacker to cause a NULL pointer dereference, resulting in a crash of the dhcpd process. While the dhcpd process is restarting, which may take up to approximately two minutes, DHCPv4 server services are unavailable on the affected device. This could temporarily prevent network access to clients that join the network during that time period. Note: Only the dhcpd process crashes and eventually restarts automatically. The router does not reload.

Multiple Cisco products are affected by a vulnerability in the Snort 3 HTTP Decoder that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart. This vulnerability is due to a lack of complete error checking when the MIME fields of the HTTP header are parsed. An attacker could exploit this vulnerability by sending crafted HTTP packets through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause a DoS condition when the Snort 3 Detection Engine unexpectedly restarts.

A vulnerability in the Protection Against Distributed Denial of Service Attacks feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct denial of service (DoS) attacks to or through the affected device. This vulnerability is due to incorrect programming of the half-opened connections limit, TCP SYN flood limit, or TCP SYN cookie features when the features are configured in vulnerable releases of Cisco IOS XE Software. An attacker could exploit this vulnerability by attempting to flood traffic to or through the affected device. A successful exploit could allow the attacker to initiate a DoS attack to or through an affected device.

A vulnerability in the detection engine of Cisco Firepower Threat Defense Software could allow an unauthenticated, remote attacker to cause the unexpected restart of the SNORT detection engine, resulting in a denial of service (DoS) condition. The vulnerability is due to the incomplete error handling of the SSL or TLS packet header during the connection establishment. An attacker could exploit this vulnerability by sending a crafted SSL or TLS packet during the connection handshake. An exploit could allow the attacker to cause the SNORT detection engine to unexpectedly restart, resulting in a partial DoS condition while the detection engine restarts. Versions prior to 6.2.3.4 are affected.

A vulnerability in the implementation of the Datagram TLS (DTLS) protocol in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause high CPU utilization, resulting in a denial of service (DoS) condition. This vulnerability is due to suboptimal processing that occurs when establishing a DTLS tunnel as part of an AnyConnect SSL VPN connection. An attacker could exploit this vulnerability by sending a steady stream of crafted DTLS traffic to an affected device. A successful exploit could allow the attacker to exhaust resources on the affected VPN headend device. This could cause existing DTLS tunnels to stop passing traffic and prevent new DTLS tunnels from establishing, resulting in a DoS condition. Note: When the attack traffic stops, the device recovers gracefully.

A vulnerability in the Remote Access SSL VPN, HTTP management and MUS functionality, of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to exhaust device memory resulting in a denial of service (DoS) condition requiring a manual reboot. This vulnerability is due to trusting user input without validation. An attacker could exploit this vulnerability by sending crafted packets to the Remote Access SSL VPN server. A successful exploit could allow the attacker to cause the device to stop responding, resulting in a DoS condition.

A vulnerability in the OSPF protocol of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, adjacent attacker to exhaust memory on an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improperly validating input by the OSPF protocol when parsing packets. An attacker could exploit this vulnerability by by sending crafted OSPF packets to an affected device. A successful exploit could allow the attacker to exhaust memory on the affected device, resulting in a DoS condition.

A vulnerability in the Remote Access SSL VPN functionality of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an authenticated, remote attacker with a valid VPN connection to exhaust device memory resulting in a denial of service (DoS) condition.This does not affect the management or MUS interfaces. This vulnerability is due to trusting user input without validation. An attacker could exploit this vulnerability by sending crafted packets to the Remote Access SSL VPN server. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the IKEv2 feature of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an authenticated, remote attacker with valid VPN user credentials to cause a DoS condition on an affected device that may also impact the availability of services to devices elsewhere in the network. This vulnerability is due to the improper processing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted, authenticated IKEv2 packets to an affected device. A successful exploit could allow the attacker to exhaust memory, causing the device to reload.

A vulnerability in the proxy service of Cisco AsyncOS for Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to exhaust system memory and cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper memory management in the proxy service of an affected device. An attacker could exploit this vulnerability by establishing a large number of HTTPS connections to the affected device. A successful exploit could allow the attacker to cause the system to stop processing new connections, which could result in a DoS condition. Note: Manual intervention may be required to recover from this situation.

A vulnerability in the Link Layer Discovery Protocol (LLDP) feature for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) Mode could allow an unauthenticated, adjacent attacker to cause a memory leak, which could result in an unexpected reload of the device. This vulnerability is due to incorrect error checking when parsing ingress LLDP packets. An attacker could exploit this vulnerability by sending a steady stream of crafted LLDP packets to an affected device. A successful exploit could allow the attacker to cause a memory leak, which could result in a denial of service (DoS) condition when the device unexpectedly reloads. Note: This vulnerability cannot be exploited by transit traffic through the device. The crafted LLDP packet must be targeted to a directly connected interface, and the attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). In addition, the attack surface for this vulnerability can be reduced by disabling LLDP on interfaces where it is not required.

Multiple vulnerabilities in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Video Surveillance 7000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. These vulnerabilities are due to incorrect processing of certain LLDP packets at ingress time. An attacker could exploit these vulnerabilities by sending crafted LLDP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DoS condition. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

Multiple vulnerabilities in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Video Surveillance 7000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. These vulnerabilities are due to incorrect processing of certain LLDP packets at ingress time. An attacker could exploit these vulnerabilities by sending crafted LLDP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DoS condition. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

Multiple vulnerabilities in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Video Surveillance 7000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. These vulnerabilities are due to incorrect processing of certain LLDP packets at ingress time. An attacker could exploit these vulnerabilities by sending crafted LLDP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DoS condition. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

Multiple vulnerabilities in the implementation of the Cisco Discovery Protocol and Link Layer Discovery Protocol (LLDP) for Cisco Video Surveillance 7000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. These vulnerabilities are due to incorrect processing of certain Cisco Discovery Protocol and LLDP packets at ingress time. An attacker could exploit these vulnerabilities by sending crafted Cisco Discovery Protocol or LLDP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DoS condition. Note: Cisco Discovery Protocol and LLDP are Layer 2 protocols. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

Multiple vulnerabilities exist in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Small Business RV Series Routers. An unauthenticated, adjacent attacker could execute arbitrary code or cause an affected router to leak system memory or reload. A memory leak or device reload would cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).