Multiple Cisco products are affected by a vulnerability in the processing of DCE/RPC requests that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to leak sensitive information or to restart, resulting in an interruption of packet inspection. This vulnerability is due to an error in buffer handling logic when processing DCE/RPC requests, which can result in a buffer use-after-free read. An attacker could exploit this vulnerability by sending a large number of DCE/RPC requests through an established connection that is inspected by Snort 3. A successful exploit could allow the attacker to unexpectedly restart the Snort 3 Detection Engine, which could cause a denial of service (DoS).

A vulnerability in the IKEv2 feature of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device that may impact the availability of services to devices elsewhere in the network. This vulnerability is due to a memory leak when parsing IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to exhaust resources, causing a DoS condition that will eventually require the device to be manually reloaded.

Multiple Cisco products are affected by a vulnerability in the Snort 3 Detection Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection. This vulnerability is due to incomplete parsing of the SSL handshake ingress packets. An attacker could exploit this vulnerability by sending crafted SSL handshake packets. A successful exploit could allow the attacker to cause a denial of service (DoS) condition when the Snort 3 Detection Engine restarts unexpectedly.

Multiple Cisco products are affected by a vulnerability in the Snort 3 detection engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection. This vulnerability is due to incomplete error checking when parsing remote procedure call (RPC) data. An attacker could exploit this vulnerability by sending crafted RPC packets through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause a DoS condition when the Snort 3 Detection Engine unexpectedly restarts.

A vulnerability in the TLS cryptography functionality of the Snort 3 Detection Engine of Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to unexpectedly restart, resulting in a denial of service (DoS) condition. This vulnerability is due to improper implementation of the TLS protocol. An attacker could exploit this vulnerability by sending a crafted TLS packet to an affected system. A successful exploit could allow the attacker to cause a device that is running Cisco Secure FTD Software to drop network traffic, resulting in a DoS condition.  Note: TLS 1.3 is not affected by this vulnerability.

A vulnerability in the memory management handling for the Snort 3 Detection Engine of Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart. This vulnerability is due to a logic error in memory management when a device is performing Snort 3 SSL packet inspection. An attacker could exploit this vulnerability by sending crafted SSL packets through an established connection to be parsed by the Snort 3 Detection Engine. A successful exploit could allow the attacker to cause a denial of service (DoS) condition when the Snort 3 Detection Engine unexpectedly restarts.

Multiple Cisco products are affected by a vulnerability in the Snort 3 Detection Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection. This vulnerability is due to an error in the binder module initialization logic of the Snort Detection Engine. An attacker could exploit this vulnerability by sending certain packets through an established connection that is parsed by Snort 3. A successful exploit could allow the attacker to cause a DoS condition when the Snort 3 Detection Engine restarts unexpectedly.

Multiple Cisco products are affected by a vulnerability in the Snort 3 Detection Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection. This vulnerability is due to an error in the JSTokenizer normalization logic when the HTTP inspection normalizes JavaScript. An attacker could exploit this vulnerability by sending crafted HTTP packets through an established connection that is parsed by Snort 3. A successful exploit could allow the attacker to cause a DoS condition when the Snort 3 Detection Engine restarts unexpectedly. JSTokenizer is not enabled by default.

Multiple Cisco products are affected by a vulnerability in the Snort 3 detection engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection.  This vulnerability is due to incomplete error checking when parsing the Multicast DNS fields of the HTTP header. An attacker could exploit this vulnerability by sending crafted HTTP packets through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause a DoS condition when the Snort 3 Detection Engine unexpectedly restarts.

Multiple Cisco products are affected by vulnerabilities in the Snort 3 VBA feature that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to crash. These vulnerabilities are due to improper error checking when decompressing VBA data. An attacker could exploit these vulnerabilities by sending crafted VBA data to the Snort 3 Detection Engine on the targeted device. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to unexpectedly restart, causing a DoS condition.

Multiple Cisco products are affected by a vulnerability in the Snort 3 VBA feature that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to crash.  This vulnerability is due to improper error checking when decompressing VBA data. An attacker could exploit this vulnerability by sending crafted VBA data to the Snort 3 Detection Engine on the targeted device. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to enter an infinite loop, causing a DoS condition.

Multiple Cisco products are affected by a vulnerability in the Snort 3 Visual Basic for Applications (VBA) feature which could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to crash.    This vulnerability is due to lack of proper error checking when decompressing VBA data. An attacker could exploit this vulnerability by sending a crafted VBA data to the Snort 3 Detection Engine on the targeted device. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to unexpectedly restart causing a a denial of service (DoS) condition.

A vulnerability in the IKEv2 feature of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device that may also impact the availability of services to devices elsewhere in the network. This vulnerability is due to memory exhaustion caused by not freeing memory during IKEv2 packet processing. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to exhaust resources, causing a DoS condition that will eventually require the device to manually reload.

A vulnerability in the networking component of Cisco access point (AP) software could allow an unauthenticated, remote attacker to cause a temporary disruption of service. This vulnerability is due to overuse of AP resources. An attacker could exploit this vulnerability by connecting to an AP on an affected device as a wireless client and sending a high rate of traffic over an extended period of time. A successful exploit could allow the attacker to cause the Datagram TLS (DTLS) session to tear down and reset, causing a denial of service (DoS) condition.

A vulnerability in the interaction between the Server Message Block (SMB) protocol preprocessor and the Snort 3 detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the configured policies or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper error-checking when the Snort 3 detection engine is processing SMB traffic. An attacker could exploit this vulnerability by sending a crafted SMB packet stream through an affected device. A successful exploit could allow the attacker to cause the Snort process to reload, resulting in a DoS condition.

A vulnerability in Address Resolution Protocol (ARP) management of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to prevent an affected device from resolving ARP entries for legitimate hosts on the connected subnets. This vulnerability exists because ARP entries are mismanaged. An attacker could exploit this vulnerability by continuously sending traffic that results in incomplete ARP entries. A successful exploit could allow the attacker to cause ARP requests on the device to be unsuccessful for legitimate hosts, resulting in a denial of service (DoS) condition.

A vulnerability in the IPv4 protocol handling of Cisco StarOS could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a memory leak that occurs during packet processing. An attacker could exploit this vulnerability by sending a series of crafted IPv4 packets through an affected device. A successful exploit could allow the attacker to exhaust the available memory and cause an unexpected restart of the npusim process, leading to a DoS condition on the affected device.

A vulnerability in the Vector Packet Processor (VPP) of Cisco Packet Data Network Gateway (PGW) could allow an unauthenticated, remote attacker to stop ICMP traffic from being processed over an IPsec connection. This vulnerability is due to the VPP improperly handling a malformed packet. An attacker could exploit this vulnerability by sending a malformed Encapsulating Security Payload (ESP) packet over an IPsec connection. A successful exploit could allow the attacker to stop ICMP traffic over an IPsec connection and cause a denial of service (DoS).

A vulnerability in the IPsec packet processor of Cisco IOS XR Software could allow an unauthenticated remote attacker to cause a denial of service (DoS) condition for IPsec sessions to an affected device. The vulnerability is due to improper handling of packets by the IPsec packet processor. An attacker could exploit this vulnerability by sending malicious ICMP error messages to an affected device that get punted to the IPsec packet processor. A successful exploit could allow the attacker to deplete IPsec memory, resulting in all future IPsec packets to an affected device being dropped by the device. Manual intervention is required to recover from this situation.

A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to insufficient resource management while establishing SSL VPN sessions. An attacker could exploit this vulnerability by sending a series of crafted HTTPS requests to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to stop accepting new connections, preventing new SSL VPN connections from being established. Existing SSL VPN sessions are not impacted. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.

A vulnerability in the Remote Access VPN (RAVPN) service of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) of the RAVPN service. This vulnerability is due to resource exhaustion. An attacker could exploit this vulnerability by sending a large number of VPN authentication requests to an affected device. A successful exploit could allow the attacker to exhaust resources, resulting in a DoS of the RAVPN service on the affected device. Depending on the impact of the attack, a reload of the device may be required to restore the RAVPN service. Services that are not related to VPN are not affected. Cisco Talos discussed these attacks in the blog post Large-scale brute-force activity targeting VPNs, SSH services with commonly used login credentials.

A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition for targeted users of the AnyConnect service on an affected device. This vulnerability is due to insufficient entropy for handlers that are used during SSL VPN session establishment. An unauthenticated attacker could exploit this vulnerability by brute forcing valid session handlers. An authenticated attacker could exploit this vulnerability by connecting to the AnyConnect VPN service of an affected device to retrieve a valid session handler and, based on that handler, predict further valid session handlers. The attacker would then send a crafted HTTPS request using the brute-forced or predicted session handler to the AnyConnect VPN server of the device. A successful exploit could allow the attacker to terminate targeted SSL VPN sessions, forcing remote users to initiate new VPN connections and reauthenticate.

Multiple Cisco products are affected by a vulnerability in the rate filtering feature of the Snort detection engine that could allow an unauthenticated, remote attacker to bypass a configured rate limiting filter.  This vulnerability is due to an incorrect connection count comparison. An attacker could exploit this vulnerability by sending traffic through an affected device at a rate that exceeds a configured rate filter. A successful exploit could allow the attacker to successfully bypass the rate filter. This could allow unintended traffic to enter the network protected by the affected device.

Multiple vulnerabilities in the Server Message Block Version 2 (SMB2) processor of the Snort detection engine on multiple Cisco products could allow an unauthenticated, remote attacker to bypass the configured policies or cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to improper management of system resources when the Snort detection engine is processing SMB2 traffic. An attacker could exploit these vulnerabilities by sending a high rate of certain types of SMB2 packets through an affected device. A successful exploit could allow the attacker to trigger a reload of the Snort process, resulting in a DoS condition. Note: When the snort preserve-connection option is enabled for the Snort detection engine, a successful exploit could also allow the attacker to bypass the configured policies and deliver a malicious payload to the protected network. The snort preserve-connection setting is enabled by default. See the Details ["#details"] section of this advisory for more information. Note: Only products that have Snort 3 configured are affected. Products that are configured with Snort 2 are not affected.

A vulnerability in the interaction of SIP and Snort 3 for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the Snort 3 detection engine to restart. This vulnerability is due to a lack of error-checking when SIP bidirectional flows are being inspected by Snort 3. An attacker could exploit this vulnerability by sending a stream of crafted SIP traffic through an interface on the targeted device. A successful exploit could allow the attacker to trigger a restart of the Snort 3 process, resulting in a denial of service (DoS) condition.

Multiple vulnerabilities in the Server Message Block Version 2 (SMB2) processor of the Snort detection engine on multiple Cisco products could allow an unauthenticated, remote attacker to bypass the configured policies or cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to improper management of system resources when the Snort detection engine is processing SMB2 traffic. An attacker could exploit these vulnerabilities by sending a high rate of certain types of SMB2 packets through an affected device. A successful exploit could allow the attacker to trigger a reload of the Snort process, resulting in a DoS condition. Note: When the snort preserve-connection option is enabled for the Snort detection engine, a successful exploit could also allow the attacker to bypass the configured policies and deliver a malicious payload to the protected network. The snort preserve-connection setting is enabled by default. See the Details ["#details"] section of this advisory for more information. Note: Only products that have Snort 3 configured are affected. Products that are configured with Snort 2 are not affected.

A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. This vulnerability is due to insufficient resource management when establishing TLS/SSL sessions. An attacker could exploit this vulnerability by sending a series of crafted TLS/SSL messages to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to stop accepting new connections, preventing new SSL VPN connections from being established. Existing SSL VPN sessions are not impacted. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.

A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to hijack an AnyConnect VPN session or cause a denial of service (DoS) condition for individual users of the AnyConnect VPN service on an affected device. This vulnerability is due to weak entropy for handlers that are used during the VPN authentication process as well as a race condition that exists in the same process. An attacker could exploit this vulnerability by correctly guessing an authentication handler and then sending crafted HTTPS requests to an affected device. A successful exploit could allow the attacker to take over the AnyConnect VPN session from a target user or prevent the target user from establishing an AnyConnect VPN session with the affected device.

A vulnerability in ICMP Version 6 (ICMPv6) processing in Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a slow system memory leak, which over time could lead to a denial of service (DoS) condition. This vulnerability is due to improper error handling when an IPv6-configured interface receives a specific type of ICMPv6 packet. An attacker could exploit this vulnerability by sending a sustained rate of crafted ICMPv6 packets to a local IPv6 address on a targeted device. A successful exploit could allow the attacker to cause a system memory leak in the ICMPv6 process on the device. As a result, the ICMPv6 process could run out of system memory and stop processing traffic. The device could then drop all ICMPv6 packets, causing traffic instability on the device. Restoring device functionality would require a device reboot.

A vulnerability in the DHCP version 4 (DHCPv4) server feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to trigger a crash of the dhcpd process, resulting in a denial of service (DoS) condition. This vulnerability exists because certain DHCPv4 messages are improperly validated when they are processed by an affected device. An attacker could exploit this vulnerability by sending a malformed DHCPv4 message to an affected device. A successful exploit could allow the attacker to cause a NULL pointer dereference, resulting in a crash of the dhcpd process. While the dhcpd process is restarting, which may take up to approximately two minutes, DHCPv4 server services are unavailable on the affected device. This could temporarily prevent network access to clients that join the network during that time period. Note: Only the dhcpd process crashes and eventually restarts automatically. The router does not reload.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) feature of Cisco IOS Software, IOS XE Software, Secure Firewall Adaptive Security Appliance (ASA) Software, and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition. This vulnerability is due to a lack of proper processing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. In the case of Cisco IOS and IOS XE Software, a successful exploit could allow the attacker to cause the device to reload unexpectedly. In the case of Cisco ASA and FTD Software, a successful exploit could allow the attacker to partially exhaust system memory, causing system instability such as being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition.

Multiple Cisco products are affected by a vulnerability in the Snort 3 HTTP Decoder that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart. This vulnerability is due to a lack of complete error checking when the MIME fields of the HTTP header are parsed. An attacker could exploit this vulnerability by sending crafted HTTP packets through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause a DoS condition when the Snort 3 Detection Engine unexpectedly restarts.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition. This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending a continuous stream of crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to partially exhaust system memory, causing system instability like being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition. This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending a continuous stream of crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to partially exhaust system memory, causing system instability like being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition.

A vulnerability in the Protection Against Distributed Denial of Service Attacks feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct denial of service (DoS) attacks to or through the affected device. This vulnerability is due to incorrect programming of the half-opened connections limit, TCP SYN flood limit, or TCP SYN cookie features when the features are configured in vulnerable releases of Cisco IOS XE Software. An attacker could exploit this vulnerability by attempting to flood traffic to or through the affected device. A successful exploit could allow the attacker to initiate a DoS attack to or through an affected device.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition. This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending a continuous stream of crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to partially exhaust system memory, causing system instability like being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition.

A vulnerability in the detection engine of Cisco Firepower Threat Defense Software could allow an unauthenticated, remote attacker to cause the unexpected restart of the SNORT detection engine, resulting in a denial of service (DoS) condition. The vulnerability is due to the incomplete error handling of the SSL or TLS packet header during the connection establishment. An attacker could exploit this vulnerability by sending a crafted SSL or TLS packet during the connection handshake. An exploit could allow the attacker to cause the SNORT detection engine to unexpectedly restart, resulting in a partial DoS condition while the detection engine restarts. Versions prior to 6.2.3.4 are affected.

A vulnerability in the implementation of the Datagram TLS (DTLS) protocol in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause high CPU utilization, resulting in a denial of service (DoS) condition. This vulnerability is due to suboptimal processing that occurs when establishing a DTLS tunnel as part of an AnyConnect SSL VPN connection. An attacker could exploit this vulnerability by sending a steady stream of crafted DTLS traffic to an affected device. A successful exploit could allow the attacker to exhaust resources on the affected VPN headend device. This could cause existing DTLS tunnels to stop passing traffic and prevent new DTLS tunnels from establishing, resulting in a DoS condition. Note: When the attack traffic stops, the device recovers gracefully.

A vulnerability in the Meraki onboarding feature of Cisco IOS XE Software could allow an authenticated, local attacker to gain root level privileges on an affected device. This vulnerability is due to insufficient memory protection in the Meraki onboarding feature of an affected device. An attacker could exploit this vulnerability by modifying the Meraki registration parameters. A successful exploit could allow the attacker to elevate privileges to root.

A vulnerability in the IPv6 DHCP (DHCPv6) client module of Cisco Adaptive Security Appliance (ASA) Software, Cisco Firepower Threat Defense (FTD) Software, Cisco IOS Software, and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of DHCPv6 messages. An attacker could exploit this vulnerability by sending crafted DHCPv6 messages to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: To successfully exploit this vulnerability, the attacker would need to either control the DHCPv6 server or be in a man-in-the-middle position.

A vulnerability in the web-based management interface of Cisco Small Business RV042, RV042G, RV320, and RV325 Routers could allow an authenticated, Administrator-level, remote attacker to cause an unexpected reload of an affected device, resulting in a denial of service (DoS) condition. To exploit this vulnerability, an attacker would need to have valid Administrator credentials on the affected device.   This vulnerability is due to improper validation of user input that is in incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface of the affected device. A successful exploit could allow the attacker to cause an unexpected reload of the device, resulting in a DoS condition.

A vulnerability in the web-based management interface of Cisco Small Business RV042, RV042G, RV320, and RV325 Routers could allow an authenticated, Administrator-level, remote attacker to cause an unexpected reload of an affected device, resulting in a denial of service (DoS) condition. To exploit this vulnerability, an attacker would need to have valid Administrator credentials on the affected device.   This vulnerability is due to improper validation of user input that is in incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface of the affected device. A successful exploit could allow the attacker to cause an unexpected reload of the device, resulting in a DoS condition.

A vulnerability in the generic routing encapsulation (GRE) tunnel decapsulation feature of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a memory handling error that occurs when GRE traffic is processed. An attacker could exploit this vulnerability by sending a crafted GRE payload through an affected device. A successful exploit could allow the attacker to cause the device to restart, resulting in a DoS condition. https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ftd-gre-dos-hmedHQPM ["https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ftd-gre-dos-hmedHQPM"] This advisory is part of the November 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication.

A vulnerability in the handler for HTTP authentication for resources accessed through the Clientless SSL VPN portal of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device or to obtain portions of process memory from an affected device. This vulnerability is due to insufficient bounds checking when parsing specific HTTP authentication messages. An attacker could exploit this vulnerability by sending malicious traffic to an affected device acting as a VPN Gateway. To send this malicious traffic, an attacker would need to control a web server that can be accessed through the Clientless SSL VPN portal. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition, or to retrieve bytes from the device process memory that may contain sensitive information.

A vulnerability in Cisco Unified Threat Defense (UTD) Snort Intrusion Prevention System (IPS) Engine for Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass configured security policies or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of HTTP requests when they are processed by Cisco UTD Snort IPS Engine. An attacker could exploit this vulnerability by sending a crafted HTTP request through an affected device. A successful exploit could allow the attacker to trigger a reload of the Snort process. If the action in case of Cisco UTD Snort IPS Engine failure is set to the default, fail-open, successful exploitation of this vulnerability could allow the attacker to bypass configured security policies. If the action in case of Cisco UTD Snort IPS Engine failure is set to fail-close, successful exploitation of this vulnerability could cause traffic that is configured to be inspected by Cisco UTD Snort IPS Engine to be dropped.