A malicious actor with access to the adjacent network could obtain unauthorized access to a UniFi Protect Camera by exploiting a discovery protocol vulnerability in the Unifi Protect Application (Version 6.1.79 and earlier). Affected Products: UniFi Protect Application (Version 6.1.79 and earlier). Mitigation: Update your UniFi Protect Application to Version 6.2.72 or later.
A vulnerability, found in EdgeRouters Version 2.0.9-hotfix.5 and earlier and UniFi Security Gateways (USG) Version 4.4.56 and earlier with their DHCPv6 prefix delegation set to dhcpv6-stateless or dhcpv6-stateful, allows a malicious actor directly connected to the WAN interface of an affected device to create a remote code execution vulnerability.
A command injection vulnerability in the DHCP Client function of all UniFi Access Points and Switches, excluding the Switch Flex Mini, could allow a Remote Code Execution (RCE). Affected Products: All UniFi Access Points (Version 6.5.53 and earlier) All UniFi Switches (Version 6.5.32 and earlier) -USW Flex Mini excluded. Mitigation: Update UniFi Access Points to Version 6.5.62 or later. Update UniFi Switches to Version 6.5.59 or later.
We have recently released new version of AirMax AirOS firmware v6.3.0 for TI, XW and XM boards that fixes vulnerabilities found on AirMax AirOS v6.2.0 and prior TI, XW and XM boards, according to the description below:There are certain end-points containing functionalities that are vulnerable to command injection. It is possible to craft an input string that passes the filter check but still contains commands, resulting in remote code execution.Mitigation:Update to the latest AirMax AirOS firmware version available at the AirMax download page.
A malicious actor with access to the network and low privileges could exploit an Improper Input Validation vulnerability found in UniFi OS to execute a Command Injection on the host device.
A backup file vulnerability found in UniFi applications (Version 7.3.83 and earlier) running on Linux operating systems allows application administrators to execute malicious commands on the host device being restored.
An Improper Input Validation in EdgeMAX EdgeSwitch (Version 1.11.0 and earlier) could allow a Command Injection by a malicious actor with access to EdgeSwitch adjacent network. Affected Products: EdgeMAX EdgeSwitch (Version 1.11.0 and earlier) Mitigation: Update the EdgeMAX EdgeSwitch to Version 1.11.1 or later.
An Improper Input Validation in UISP Application could allow a Command Injection by a malicious actor with High Privileges and local access.
A weakness has been identified in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. Impacted is an unknown function of the component Web Management Interface. Executing a manipulation of the argument src can lead to command injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks. The presence of this vulnerability remains uncertain at this time. The vendor position is that post-authentication issues are not accepted as vulnerabilities.
A vulnerability was detected in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. The impacted element is an unknown function of the component Web Management Interface. The manipulation of the argument Name results in command injection. The attack can be launched remotely. The exploit is now public and may be used. There is ongoing doubt regarding the real existence of this vulnerability. The vendor position is that post-authentication issues are not accepted as vulnerabilities.
A security flaw has been discovered in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. This issue affects some unknown processing of the component Web Management Interface. Performing a manipulation of the argument ecn-down results in command injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The existence of this vulnerability is still disputed at present. The vendor position is that post-authentication issues are not accepted as vulnerabilities.
A flaw has been found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. This affects an unknown function of the component Web Management Interface. This manipulation of the argument suffix-rate-up causes command injection. The attack may be initiated remotely. The exploit has been published and may be used. The real existence of this vulnerability is still doubted at the moment. The vendor position is that post-authentication issues are not accepted as vulnerabilities.
A security vulnerability has been detected in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. The affected element is an unknown function of the component Web Management Interface. The manipulation of the argument dpi leads to command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. There are still doubts about whether this vulnerability truly exists. The vendor position is that post-authentication issues are not accepted as vulnerabilities.
A vulnerability was identified in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. This vulnerability affects unknown code of the component Web Management Interface. Such manipulation of the argument ecn-up leads to command injection. The attack may be performed from remote. The exploit is publicly available and might be used. The actual existence of this vulnerability is currently in question. The vendor position is that post-authentication issues are not accepted as vulnerabilities.
Command Injection in EdgeMAX EdgeSwitch prior to 1.8.2 allow an Admin user to execute commands as root.
A privilege escalation exists in UniFi Video Controller =<3.10.6 that would allow an attacker on the local machine to run arbitrary commands.
A vulnerability, which was classified as critical, was found in Ubiquiti EdgeRouter X 2.0.9-hotfix.6. Affected is an unknown function of the component Static Routing Configuration Handler. The manipulation of the argument next-hop-interface leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. VDB-223302 is the identifier assigned to this vulnerability. NOTE: The vendor position is that post-authentication issues are not accepted as vulnerabilities.
A malicious actor in Wi-Fi range of the affected product could leverage a vulnerability in the airMAX Wireless Protocol to achieve a remote code execution (RCE) within the affected product. Affected Products: airMAX AC (Version 8.7.20 and earlier) airMAX M (Version 6.3.22 and earlier) airFiber AF60-XG (Version 1.2.2 and earlier) airFiber AF60 (Version 2.6.7 and earlier) Mitigation: Update your airMAX AC to Version 8.7.21 or later. Update your airMAX M to Version 6.3.24 or later. Update your airFiber AF60-XG to Version 1.2.3 or later. Update your airFiber AF60 to Version 2.6.8 or later.
An Improper Input Validation in EdgeMAX EdgeSwitch (Version 1.10.4 and earlier) could allow a Command Injection by a malicious actor with access to EdgeSwitch adjacent network.
An Improper Input Validation in certain UniFi Access devices could allow a Command Injection by a malicious actor with access to UniFi Access management network. Affected Products: UniFi Access Reader Pro (Version 2.14.21 and earlier) UniFi Access G2 Reader Pro (Version 1.10.32 and earlier) UniFi Access G3 Reader Pro (Version 1.10.30 and earlier) UniFi Access Intercom (Version 1.7.28 and earlier) UniFi Access G3 Intercom (Version 1.7.29 and earlier) UniFi Access Intercom Viewer (Version 1.3.20 and earlier) Mitigation: Update UniFi Access Reader Pro Version 2.15.9 or later Update UniFi Access G2 Reader Pro Version 1.11.23 or later Update UniFi Access G3 Reader Pro Version 1.11.22 or later Update UniFi Access Intercom Version 1.8.22 or later Update UniFi Access G3 Intercom Version 1.8.22 or later Update UniFi Access Intercom Viewer Version 1.4.39 or later
A vulnerability, which was classified as critical, has been found in Ubiquiti EdgeRouter X 2.0.9-hotfix.6. This issue affects some unknown processing of the component NAT Configuration Handler. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The identifier VDB-223301 was assigned to this vulnerability. NOTE: The vendor position is that post-authentication issues are not accepted as vulnerabilities.
On certain Ubiquiti devices, Command Injection exists via a GET request to stainfo.cgi (aka Show AP info) because the ifname variable is not sanitized, as demonstrated by shell metacharacters. The fixed version is v4.0.1 for 802.11 ISP products, v5.3.5 for AirMax ISP products, and v5.4.5 for AirSync firmware. For example, Nanostation5 (Air OS) is affected.
Multiple Improper Input Validation vulnerabilities in UniFi Connect EV Station Lite may allow a Command Injection by a malicious actor with network access to the UniFi Connect EV Station Lite. Affected Products: UniFi Connect EV Station Lite (Version 1.5.1 and earlier) Mitigation: Update UniFi Connect EV Station Lite to Version 1.5.2 or later
An Improper Neutralization of Escape Sequences vulnerability could allow an Authentication Bypass with a Remote Code Execution (RCE) by a malicious actor with access to UniFi Protect Cameras adjacent network.
In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, a privileged user can execute arbitrary shell commands over the SSH CLI interface. This allows to execute shell commands under the root user.
A Command Injection vulnerability found in a Self-Hosted UniFi Network Servers (Linux) with UniFi Network Application (Version 8.3.32 and earlier) allows a malicious actor with unifi user shell access to escalate privileges to root on the host device.
A Command Injection vulnerability found in a Self-Hosted UniFi Network Servers (Linux) with UniFi Network Application (Version 8.0.28 and earlier) allows a malicious actor with UniFi Network Application Administrator credentials to escalate privileges to root on the host device. Affected Products: UniFi Network Application (Version 8.0.28 and earlier) . Mitigation: Update UniFi Network Application to Version 8.1.113 or later.
A vulnerability has been found in Ubiquiti EdgeRouter X 2.0.9-hotfix.6 and classified as critical. Affected by this vulnerability is an unknown functionality of the component OSPF Handler. The manipulation of the argument area leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The associated identifier of this vulnerability is VDB-223303. NOTE: The vendor position is that post-authentication issues are not accepted as vulnerabilities.
A command injection vulnerability exists in EdgeSwitch firmware <v1.9.0 that allowed an authenticated read-only user to execute arbitrary shell commands over the HTTP interface, allowing them to escalate privileges.
We have recently released new version of UniFi Protect firmware v1.13.3 and v1.14.10 for Unifi Cloud Key Gen2 Plus and UniFi Dream Machine Pro/UNVR respectively that fixes vulnerabilities found on Protect firmware v1.13.2, v1.14.9 and prior according to the description below:View only users can run certain custom commands which allows them to assign themselves unauthorized roles and escalate their privileges.
An issue discovered in sub_4117F8 function in TOTOLINK X6000R V9.4.0cu.852_B20230719 allows attackers to run arbitrary commands via the 'lang' parameter.
An issue discovered in TOTOLINK X6000R v9.4.0cu.852_B20230719 allows attackers to run arbitrary commands via the sub_41284C function.
TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_415498 function.
TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_41590C function.
TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_422BD4 function.
TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_ 41D494 function.
TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_415730 function.
TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_417094 function.
TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_412688 function.
TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_41E588 function.
A command injection in the parsing_xml_stasurvey function inside libcgifunc.so of the D-Link DAP-X1860 repeater 1.00 through 1.01b05-01 allows attackers (within range of the repeater) to run shell commands as root during the setup process of the repeater, via a crafted SSID. Also, network names containing single quotes (in the range of the repeater) can result in a denial of service.
A command injection vulnerability in Ivanti Sentry prior to 9.19.0 allows unauthenticated threat actor to execute arbitrary commands on the underlying operating system of the appliance within the same physical or logical network.
The LB-Link routers, including the BL-AC2100_AZ3 V1.0.4, BL-WR4000 v2.5.0, BL-WR9000_AE4 v2.4.9, BL-AC1900_AZ2 v1.0.2, BL-X26_AC8 v1.2.8, and BL-LTE300_DA4 V1.2.3 models, are vulnerable to unauthorized command injection. Attackers can exploit this vulnerability by accessing the /goform/set_serial_cfg interface to gain the highest level of device privileges without authorization, enabling them to remotely execute malicious commands.
An issue was discovered in DIR-823 firmware 20250416. There is an RCE vulnerability in the set_cassword settings interface, as the http_casswd parameter is not filtered by '&'to allow injection of reverse connection commands.
An issue was discovered on Connectize AC21000 G6 641.139.1.1256 allows attackers to run arbitrary commands via use of a crafted string in the ping utility.
Command Injection vulnerability in D-Link Dir 882 with firmware version DIR882A1_FW130B06 allows attackers to run arbitrary commands via crafted POST request to /HNAP1/.
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK752 before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK852 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.
This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DVA-2800 and DSL-2888A routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the dhttpd service, which listens on TCP port 8008 by default. When parsing the path parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the web server. Was ZDI-CAN-10911.
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK752 before 3.2.15.25, RBK753 before 3.2.15.25, RBK753S before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK842 before 3.2.15.25, RBR840 before 3.2.15.25, RBS840 before 3.2.15.25, RBK852 before 3.2.15.25, RBK853 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK752 before 3.2.15.25, RBK753 before 3.2.15.25, RBK753S before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK842 before 3.2.15.25, RBR840 before 3.2.15.25, RBS840 before 3.2.15.25, RBK852 before 3.2.15.25, RBK853 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.