In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent() Two WARNINGs are observed when SMMU driver rolls back upon failure: arm-smmu-v3.9.auto: Failed to register iommu arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22 ------------[ cut here ]------------ WARNING: CPU: 5 PID: 1 at kernel/dma/mapping.c:74 dmam_free_coherent+0xc0/0xd8 Call trace: dmam_free_coherent+0xc0/0xd8 (P) tegra241_vintf_free_lvcmdq+0x74/0x188 tegra241_cmdqv_remove_vintf+0x60/0x148 tegra241_cmdqv_remove+0x48/0xc8 arm_smmu_impl_remove+0x28/0x60 devm_action_release+0x1c/0x40 ------------[ cut here ]------------ 128 pages are still in use! WARNING: CPU: 16 PID: 1 at mm/page_alloc.c:6902 free_contig_range+0x18c/0x1c8 Call trace: free_contig_range+0x18c/0x1c8 (P) cma_release+0x154/0x2f0 dma_free_contiguous+0x38/0xa0 dma_direct_free+0x10c/0x248 dma_free_attrs+0x100/0x290 dmam_free_coherent+0x78/0xd8 tegra241_vintf_free_lvcmdq+0x74/0x160 tegra241_cmdqv_remove+0x98/0x198 arm_smmu_impl_remove+0x28/0x60 devm_action_release+0x1c/0x40 This is because the LVCMDQ queue memory are managed by devres, while that dmam_free_coherent() is called in the context of devm_action_release(). Jason pointed out that "arm_smmu_impl_probe() has mis-ordered the devres callbacks if ops->device_remove() is going to be manually freeing things that probe allocated": https://lore.kernel.org/linux-iommu/20250407174408.GB1722458@nvidia.com/ In fact, tegra241_cmdqv_init_structures() only allocates memory resources which means any failure that it generates would be similar to -ENOMEM, so there is no point in having that "falling back to standard SMMU" routine, as the standard SMMU would likely fail to allocate memory too. Remove the unwind part in tegra241_cmdqv_init_structures(), and return a proper error code to ask SMMU driver to call tegra241_cmdqv_remove() via impl_ops->device_remove(). Then, drop tegra241_vintf_free_lvcmdq() since devres will take care of that.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid divide by zero by initializing dummy pitch to 1 [Why] If the dummy values in `populate_dummy_dml_surface_cfg()` aren't updated then they can lead to a divide by zero in downstream callers like CalculateVMAndRowBytes() [How] Initialize dummy value to a value to avoid divide by zero.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage() The function brcmf_usb_dl_writeimage() calls the function brcmf_usb_dl_cmd() but dose not check its return value. The 'state.state' and the 'state.bytes' are uninitialized if the function brcmf_usb_dl_cmd() fails. It is dangerous to use uninitialized variables in the conditions. Add error handling for brcmf_usb_dl_cmd() to jump to error handling path if the brcmf_usb_dl_cmd() fails and the 'state.state' and the 'state.bytes' are uninitialized. Improve the error message to report more detailed error information.

In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: fix deadlock and link starvation in outgoing data path The current implementation queues up new control and user packets as needed and processes this queue down to the ldisc in the same code path. That means that the upper and the lower layer are hard coupled in the code. Due to this deadlocks can happen as seen below while transmitting data, especially during ldisc congestion. Furthermore, the data channels starve the control channel on high transmission load on the ldisc. Introduce an additional control channel data queue to prevent timeouts and link hangups during ldisc congestion. This is being processed before the user channel data queue in gsm_data_kick(), i.e. with the highest priority. Put the queue to ldisc data path into a workqueue and trigger it whenever new data has been put into the transmission queue. Change gsm_dlci_data_sweep() accordingly to fill up the transmission queue until TX_THRESH_HI. This solves the locking issue, keeps latency low and provides good performance on high data load. Note that now all packets from a DLCI are removed from the internal queue if the associated DLCI was closed. This ensures that no data is sent by the introduced write task to an already closed DLCI. BUG: spinlock recursion on CPU#0, test_v24_loop/124 lock: serial8250_ports+0x3a8/0x7500, .magic: dead4ead, .owner: test_v24_loop/124, .owner_cpu: 0 CPU: 0 PID: 124 Comm: test_v24_loop Tainted: G O 5.18.0-rc2 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x34/0x44 do_raw_spin_lock+0x76/0xa0 _raw_spin_lock_irqsave+0x72/0x80 uart_write_room+0x3b/0xc0 gsm_data_kick+0x14b/0x240 [n_gsm] gsmld_write_wakeup+0x35/0x70 [n_gsm] tty_wakeup+0x53/0x60 tty_port_default_wakeup+0x1b/0x30 serial8250_tx_chars+0x12f/0x220 serial8250_handle_irq.part.0+0xfe/0x150 serial8250_default_handle_irq+0x48/0x80 serial8250_interrupt+0x56/0xa0 __handle_irq_event_percpu+0x78/0x1f0 handle_irq_event+0x34/0x70 handle_fasteoi_irq+0x90/0x1e0 __common_interrupt+0x69/0x100 common_interrupt+0x48/0xc0 asm_common_interrupt+0x1e/0x40 RIP: 0010:__do_softirq+0x83/0x34e Code: 2a 0a ff 0f b7 ed c7 44 24 10 0a 00 00 00 48 c7 c7 51 2a 64 82 e8 2d e2 d5 ff 65 66 c7 05 83 af 1e 7e 00 00 fb b8 ff ff ff ff <49> c7 c2 40 61 80 82 0f bc c5 41 89 c4 41 83 c4 01 0f 84 e6 00 00 RSP: 0018:ffffc90000003f98 EFLAGS: 00000286 RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff82642a51 RDI: ffffffff825bb5e7 RBP: 0000000000000200 R08: 00000008de3271a8 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000030 R14: 0000000000000000 R15: 0000000000000000 ? __do_softirq+0x73/0x34e irq_exit_rcu+0xb5/0x100 common_interrupt+0xa4/0xc0 </IRQ> <TASK> asm_common_interrupt+0x1e/0x40 RIP: 0010:_raw_spin_unlock_irqrestore+0x2e/0x50 Code: 00 55 48 89 fd 48 83 c7 18 53 48 89 f3 48 8b 74 24 10 e8 85 28 36 ff 48 89 ef e8 cd 58 36 ff 80 e7 02 74 01 fb bf 01 00 00 00 <e8> 3d 97 33 ff 65 8b 05 96 23 2b 7e 85 c0 74 03 5b 5d c3 0f 1f 44 RSP: 0018:ffffc9000020fd08 EFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000246 RCX: 0000000000000000 RDX: 0000000000000004 RSI: ffffffff8257fd74 RDI: 0000000000000001 RBP: ffff8880057de3a0 R08: 00000008de233000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000100 R14: 0000000000000202 R15: ffff8880057df0b8 ? _raw_spin_unlock_irqrestore+0x23/0x50 gsmtty_write+0x65/0x80 [n_gsm] n_tty_write+0x33f/0x530 ? swake_up_all+0xe0/0xe0 file_tty_write.constprop.0+0x1b1/0x320 ? n_tty_flush_buffer+0xb0/0xb0 new_sync_write+0x10c/0x190 vfs_write+0x282/0x310 ksys_write+0x68/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f3e5e35c15c Code: 8b 7c 24 08 89 c5 e8 c5 ff ff ff 89 ef 89 44 24 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: aoe: clean device rq_list in aoedev_downdev() An aoe device's rq_list contains accepted block requests that are waiting to be transmitted to the aoe target. This queue was added as part of the conversion to blk_mq. However, the queue was not cleaned out when an aoe device is downed which caused blk_mq_freeze_queue() to sleep indefinitely waiting for those requests to complete, causing a hang. This fix cleans out the queue before calling blk_mq_freeze_queue().

In the Linux kernel, the following vulnerability has been resolved: riscv: save the SR_SUM status over switches When threads/tasks are switched we need to ensure the old execution's SR_SUM state is saved and the new thread has the old SR_SUM state restored. The issue was seen under heavy load especially with the syz-stress tool running, with crashes as follows in schedule_tail: Unable to handle kernel access to user memory without uaccess routines at virtual address 000000002749f0d0 Oops [#1] Modules linked in: CPU: 1 PID: 4875 Comm: syz-executor.0 Not tainted 5.12.0-rc2-syzkaller-00467-g0d7588ab9ef9 #0 Hardware name: riscv-virtio,qemu (DT) epc : schedule_tail+0x72/0xb2 kernel/sched/core.c:4264 ra : task_pid_vnr include/linux/sched.h:1421 [inline] ra : schedule_tail+0x70/0xb2 kernel/sched/core.c:4264 epc : ffffffe00008c8b0 ra : ffffffe00008c8ae sp : ffffffe025d17ec0 gp : ffffffe005d25378 tp : ffffffe00f0d0000 t0 : 0000000000000000 t1 : 0000000000000001 t2 : 00000000000f4240 s0 : ffffffe025d17ee0 s1 : 000000002749f0d0 a0 : 000000000000002a a1 : 0000000000000003 a2 : 1ffffffc0cfac500 a3 : ffffffe0000c80cc a4 : 5ae9db91c19bbe00 a5 : 0000000000000000 a6 : 0000000000f00000 a7 : ffffffe000082eba s2 : 0000000000040000 s3 : ffffffe00eef96c0 s4 : ffffffe022c77fe0 s5 : 0000000000004000 s6 : ffffffe067d74e00 s7 : ffffffe067d74850 s8 : ffffffe067d73e18 s9 : ffffffe067d74e00 s10: ffffffe00eef96e8 s11: 000000ae6cdf8368 t3 : 5ae9db91c19bbe00 t4 : ffffffc4043cafb2 t5 : ffffffc4043cafba t6 : 0000000000040000 status: 0000000000000120 badaddr: 000000002749f0d0 cause: 000000000000000f Call Trace: [<ffffffe00008c8b0>] schedule_tail+0x72/0xb2 kernel/sched/core.c:4264 [<ffffffe000005570>] ret_from_exception+0x0/0x14 Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace b5f8f9231dc87dda ]--- The issue comes from the put_user() in schedule_tail (kernel/sched/core.c) doing the following: asmlinkage __visible void schedule_tail(struct task_struct *prev) { ... if (current->set_child_tid) put_user(task_pid_vnr(current), current->set_child_tid); ... } the put_user() macro causes the code sequence to come out as follows: 1: __enable_user_access() 2: reg = task_pid_vnr(current); 3: *current->set_child_tid = reg; 4: __disable_user_access() The problem is that we may have a sleeping function as argument which could clear SR_SUM causing the panic above. This was fixed by evaluating the argument of the put_user() macro outside the user-enabled section in commit 285a76bb2cf5 ("riscv: evaluate put_user() arg before enabling user access")" In order for riscv to take advantage of unsafe_get/put_XXX() macros and to avoid the same issue we had with put_user() and sleeping functions we must ensure code flow can go through switch_to() from within a region of code with SR_SUM enabled and come back with SR_SUM still enabled. This patch addresses the problem allowing future work to enable full use of unsafe_get/put_XXX() macros without needing to take a CSR bit flip cost on every access. Make switch_to() save and restore SR_SUM.

In the Linux kernel, the following vulnerability has been resolved: Input: gpio-keys - fix a sleep while atomic with PREEMPT_RT When enabling PREEMPT_RT, the gpio_keys_irq_timer() callback runs in hard irq context, but the input_event() takes a spin_lock, which isn't allowed there as it is converted to a rt_spin_lock(). [ 4054.289999] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 4054.290028] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/0 ... [ 4054.290195] __might_resched+0x13c/0x1f4 [ 4054.290209] rt_spin_lock+0x54/0x11c [ 4054.290219] input_event+0x48/0x80 [ 4054.290230] gpio_keys_irq_timer+0x4c/0x78 [ 4054.290243] __hrtimer_run_queues+0x1a4/0x438 [ 4054.290257] hrtimer_interrupt+0xe4/0x240 [ 4054.290269] arch_timer_handler_phys+0x2c/0x44 [ 4054.290283] handle_percpu_devid_irq+0x8c/0x14c [ 4054.290297] handle_irq_desc+0x40/0x58 [ 4054.290307] generic_handle_domain_irq+0x1c/0x28 [ 4054.290316] gic_handle_irq+0x44/0xcc Considering the gpio_keys_irq_isr() can run in any context, e.g. it can be threaded, it seems there's no point in requesting the timer isr to run in hard irq context. Relax the hrtimer not to use the hard context.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix the inode leak in btrfs_iget() [BUG] There is a bug report that a syzbot reproducer can lead to the following busy inode at unmount time: BTRFS info (device loop1): last unmount of filesystem 1680000e-3c1e-4c46-84b6-56bd3909af50 VFS: Busy inodes after unmount of loop1 (btrfs) ------------[ cut here ]------------ kernel BUG at fs/super.c:650! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 48168 Comm: syz-executor Not tainted 6.15.0-rc2-00471-g119009db2674 #2 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:generic_shutdown_super+0x2e9/0x390 fs/super.c:650 Call Trace: <TASK> kill_anon_super+0x3a/0x60 fs/super.c:1237 btrfs_kill_super+0x3b/0x50 fs/btrfs/super.c:2099 deactivate_locked_super+0xbe/0x1a0 fs/super.c:473 deactivate_super fs/super.c:506 [inline] deactivate_super+0xe2/0x100 fs/super.c:502 cleanup_mnt+0x21f/0x440 fs/namespace.c:1435 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x269/0x290 kernel/entry/common.c:218 do_syscall_64+0xd4/0x250 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> [CAUSE] When btrfs_alloc_path() failed, btrfs_iget() directly returned without releasing the inode already allocated by btrfs_iget_locked(). This results the above busy inode and trigger the kernel BUG. [FIX] Fix it by calling iget_failed() if btrfs_alloc_path() failed. If we hit error inside btrfs_read_locked_inode(), it will properly call iget_failed(), so nothing to worry about. Although the iget_failed() cleanup inside btrfs_read_locked_inode() is a break of the normal error handling scheme, let's fix the obvious bug and backport first, then rework the error handling later.

In the Linux kernel, the following vulnerability has been resolved: coresight: holding cscfg_csdev_lock while removing cscfg from csdev There'll be possible race scenario for coresight config: CPU0 CPU1 (perf enable) load module cscfg_load_config_sets() activate config. // sysfs (sys_active_cnt == 1) ... cscfg_csdev_enable_active_config() lock(csdev->cscfg_csdev_lock) deactivate config // sysfs (sys_activec_cnt == 0) cscfg_unload_config_sets() <iterating config_csdev_list> cscfg_remove_owned_csdev_configs() // here load config activate by CPU1 unlock(csdev->cscfg_csdev_lock) iterating config_csdev_list could be raced with config_csdev_list's entry delete. To resolve this race , hold csdev->cscfg_csdev_lock() while cscfg_remove_owned_csdev_configs()

In the Linux kernel, the following vulnerability has been resolved: dm cache: prevent BUG_ON by blocking retries on failed device resumes A cache device failing to resume due to mapping errors should not be retried, as the failure leaves a partially initialized policy object. Repeating the resume operation risks triggering BUG_ON when reloading cache mappings into the incomplete policy object. Reproduce steps: 1. create a cache metadata consisting of 512 or more cache blocks, with some mappings stored in the first array block of the mapping array. Here we use cache_restore v1.0 to build the metadata. cat <<EOF >> cmeta.xml <superblock uuid="" block_size="128" nr_cache_blocks="512" \ policy="smq" hint_width="4"> <mappings> <mapping cache_block="0" origin_block="0" dirty="false"/> </mappings> </superblock> EOF dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" cache_restore -i cmeta.xml -o /dev/mapper/cmeta --metadata-version=2 dmsetup remove cmeta 2. wipe the second array block of the mapping array to simulate data degradations. mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \ 2>/dev/null | hexdump -e '1/8 "%u\n"') ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \ 2>/dev/null | hexdump -e '1/8 "%u\n"') dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock 3. try bringing up the cache device. The resume is expected to fail due to the broken array block. dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dmsetup create cache --notable dmsetup load cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" dmsetup resume cache 4. try resuming the cache again. An unexpected BUG_ON is triggered while loading cache mappings. dmsetup resume cache Kernel logs: (snip) ------------[ cut here ]------------ kernel BUG at drivers/md/dm-cache-policy-smq.c:752! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 332 Comm: dmsetup Not tainted 6.13.4 #3 RIP: 0010:smq_load_mapping+0x3e5/0x570 Fix by disallowing resume operations for devices that failed the initial attempt.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add more checks for DSC / HUBP ONO guarantees [WHY] For non-zero DSC instances it's possible that the HUBP domain required to drive it for sequential ONO ASICs isn't met, potentially causing the logic to the tile to enter an undefined state leading to a system hang. [HOW] Add more checks to ensure that the HUBP domain matching the DSC instance is appropriately powered. (cherry picked from commit da63df07112e5a9857a8d2aaa04255c4206754ec)

In the Linux kernel, the following vulnerability has been resolved: net: libwx: properly reset Rx ring descriptor When device reset is triggered by feature changes such as toggling Rx VLAN offload, wx->do_reset() is called to reinitialize Rx rings. The hardware descriptor ring may retain stale values from previous sessions. And only set the length to 0 in rx_desc[0] would result in building malformed SKBs. Fix it to ensure a clean slate after device reset. [ 549.186435] [ C16] ------------[ cut here ]------------ [ 549.186457] [ C16] kernel BUG at net/core/skbuff.c:2814! [ 549.186468] [ C16] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 549.186472] [ C16] CPU: 16 UID: 0 PID: 0 Comm: swapper/16 Kdump: loaded Not tainted 6.16.0-rc4+ #23 PREEMPT(voluntary) [ 549.186476] [ C16] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 [ 549.186478] [ C16] RIP: 0010:__pskb_pull_tail+0x3ff/0x510 [ 549.186484] [ C16] Code: 06 f0 ff 4f 34 74 7b 4d 8b 8c 24 c8 00 00 00 45 8b 84 24 c0 00 00 00 e9 c8 fd ff ff 48 c7 44 24 08 00 00 00 00 e9 5e fe ff ff <0f> 0b 31 c0 e9 23 90 5b ff 41 f7 c6 ff 0f 00 00 75 bf 49 8b 06 a8 [ 549.186487] [ C16] RSP: 0018:ffffb391c0640d70 EFLAGS: 00010282 [ 549.186490] [ C16] RAX: 00000000fffffff2 RBX: ffff8fe7e4d40200 RCX: 00000000fffffff2 [ 549.186492] [ C16] RDX: ffff8fe7c3a4bf8e RSI: 0000000000000180 RDI: ffff8fe7c3a4bf40 [ 549.186494] [ C16] RBP: ffffb391c0640da8 R08: ffff8fe7c3a4c0c0 R09: 000000000000000e [ 549.186496] [ C16] R10: ffffb391c0640d88 R11: 000000000000000e R12: ffff8fe7e4d40200 [ 549.186497] [ C16] R13: 00000000fffffff2 R14: ffff8fe7fa01a000 R15: 00000000fffffff2 [ 549.186499] [ C16] FS: 0000000000000000(0000) GS:ffff8fef5ae40000(0000) knlGS:0000000000000000 [ 549.186502] [ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 549.186503] [ C16] CR2: 00007f77d81d6000 CR3: 000000051a032000 CR4: 0000000000750ef0 [ 549.186505] [ C16] PKRU: 55555554 [ 549.186507] [ C16] Call Trace: [ 549.186510] [ C16] <IRQ> [ 549.186513] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186517] [ C16] __skb_pad+0xc7/0xf0 [ 549.186523] [ C16] wx_clean_rx_irq+0x355/0x3b0 [libwx] [ 549.186533] [ C16] wx_poll+0x92/0x120 [libwx] [ 549.186540] [ C16] __napi_poll+0x28/0x190 [ 549.186544] [ C16] net_rx_action+0x301/0x3f0 [ 549.186548] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186551] [ C16] ? __raw_spin_lock_irqsave+0x1e/0x50 [ 549.186554] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186557] [ C16] ? wake_up_nohz_cpu+0x35/0x160 [ 549.186559] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186563] [ C16] handle_softirqs+0xf9/0x2c0 [ 549.186568] [ C16] __irq_exit_rcu+0xc7/0x130 [ 549.186572] [ C16] common_interrupt+0xb8/0xd0 [ 549.186576] [ C16] </IRQ> [ 549.186577] [ C16] <TASK> [ 549.186579] [ C16] asm_common_interrupt+0x22/0x40 [ 549.186582] [ C16] RIP: 0010:cpuidle_enter_state+0xc2/0x420 [ 549.186585] [ C16] Code: 00 00 e8 11 0e 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 0d ed 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 549.186587] [ C16] RSP: 0018:ffffb391c0277e78 EFLAGS: 00000246 [ 549.186590] [ C16] RAX: ffff8fef5ae40000 RBX: 0000000000000003 RCX: 0000000000000000 [ 549.186591] [ C16] RDX: 0000007fde0faac5 RSI: ffffffff826e53f6 RDI: ffffffff826fa9b3 [ 549.186593] [ C16] RBP: ffff8fe7c3a20800 R08: 0000000000000002 R09: 0000000000000000 [ 549.186595] [ C16] R10: 0000000000000000 R11: 000000000000ffff R12: ffffffff82ed7a40 [ 549.186596] [ C16] R13: 0000007fde0faac5 R14: 0000000000000003 R15: 0000000000000000 [ 549.186601] [ C16] ? cpuidle_enter_state+0xb3/0x420 [ 549.186605] [ C16] cpuidle_en ---truncated---

In the Linux kernel, the following vulnerability has been resolved: KVM: Allow CPU to reschedule while setting per-page memory attributes When running an SEV-SNP guest with a sufficiently large amount of memory (1TB+), the host can experience CPU soft lockups when running an operation in kvm_vm_set_mem_attributes() to set memory attributes on the whole range of guest memory. watchdog: BUG: soft lockup - CPU#8 stuck for 26s! [qemu-kvm:6372] CPU: 8 UID: 0 PID: 6372 Comm: qemu-kvm Kdump: loaded Not tainted 6.15.0-rc7.20250520.el9uek.rc1.x86_64 #1 PREEMPT(voluntary) Hardware name: Oracle Corporation ORACLE SERVER E4-2c/Asm,MB Tray,2U,E4-2c, BIOS 78016600 11/13/2024 RIP: 0010:xas_create+0x78/0x1f0 Code: 00 00 00 41 80 fc 01 0f 84 82 00 00 00 ba 06 00 00 00 bd 06 00 00 00 49 8b 45 08 4d 8d 65 08 41 39 d6 73 20 83 ed 06 48 85 c0 <74> 67 48 89 c2 83 e2 03 48 83 fa 02 75 0c 48 3d 00 10 00 00 0f 87 RSP: 0018:ffffad890a34b940 EFLAGS: 00000286 RAX: ffff96f30b261daa RBX: ffffad890a34b9c8 RCX: 0000000000000000 RDX: 000000000000001e RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffad890a356868 R13: ffffad890a356860 R14: 0000000000000000 R15: ffffad890a356868 FS: 00007f5578a2a400(0000) GS:ffff97ed317e1000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f015c70fb18 CR3: 00000001109fd006 CR4: 0000000000f70ef0 PKRU: 55555554 Call Trace: <TASK> xas_store+0x58/0x630 __xa_store+0xa5/0x130 xa_store+0x2c/0x50 kvm_vm_set_mem_attributes+0x343/0x710 [kvm] kvm_vm_ioctl+0x796/0xab0 [kvm] __x64_sys_ioctl+0xa3/0xd0 do_syscall_64+0x8c/0x7a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f5578d031bb Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2d 4c 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe0a742b88 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000000004020aed2 RCX: 00007f5578d031bb RDX: 00007ffe0a742c80 RSI: 000000004020aed2 RDI: 000000000000000b RBP: 0000010000000000 R08: 0000010000000000 R09: 0000017680000000 R10: 0000000000000080 R11: 0000000000000246 R12: 00005575e5f95120 R13: 00007ffe0a742c80 R14: 0000000000000008 R15: 00005575e5f961e0 While looping through the range of memory setting the attributes, call cond_resched() to give the scheduler a chance to run a higher priority task on the runqueue if necessary and avoid staying in kernel mode long enough to trigger the lockup.

In the Linux kernel, the following vulnerability has been resolved: net/sched: Abort __tc_modify_qdisc if parent class does not exist Lion's patch [1] revealed an ancient bug in the qdisc API. Whenever a user creates/modifies a qdisc specifying as a parent another qdisc, the qdisc API will, during grafting, detect that the user is not trying to attach to a class and reject. However grafting is performed after qdisc_create (and thus the qdiscs' init callback) is executed. In qdiscs that eventually call qdisc_tree_reduce_backlog during init or change (such as fq, hhf, choke, etc), an issue arises. For example, executing the following commands: sudo tc qdisc add dev lo root handle a: htb default 2 sudo tc qdisc add dev lo parent a: handle beef fq Qdiscs such as fq, hhf, choke, etc unconditionally invoke qdisc_tree_reduce_backlog() in their control path init() or change() which then causes a failure to find the child class; however, that does not stop the unconditional invocation of the assumed child qdisc's qlen_notify with a null class. All these qdiscs make the assumption that class is non-null. The solution is ensure that qdisc_leaf() which looks up the parent class, and is invoked prior to qdisc_create(), should return failure on not finding the class. In this patch, we leverage qdisc_leaf to return ERR_PTRs whenever the parentid doesn't correspond to a class, so that we can detect it earlier on and abort before qdisc_create is called. [1] https://lore.kernel.org/netdev/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com/

In the Linux kernel, the following vulnerability has been resolved: tipc: fix a possible memleak in tipc_buf_append __skb_linearize() doesn't free the skb when it fails, so move '*buf = NULL' after __skb_linearize(), so that the skb can be freed on the err path.

In the Linux kernel, the following vulnerability has been resolved: perf: Fix hang while freeing sigtrap event Perf can hang while freeing a sigtrap event if a related deferred signal hadn't managed to be sent before the file got closed: perf_event_overflow() task_work_add(perf_pending_task) fput() task_work_add(____fput()) task_work_run() ____fput() perf_release() perf_event_release_kernel() _free_event() perf_pending_task_sync() task_work_cancel() -> FAILED rcuwait_wait_event() Once task_work_run() is running, the list of pending callbacks is removed from the task_struct and from this point on task_work_cancel() can't remove any pending and not yet started work items, hence the task_work_cancel() failure and the hang on rcuwait_wait_event(). Task work could be changed to remove one work at a time, so a work running on the current task can always cancel a pending one, however the wait / wake design is still subject to inverted dependencies when remote targets are involved, as pictured by Oleg: T1 T2 fd = perf_event_open(pid => T2->pid); fd = perf_event_open(pid => T1->pid); close(fd) close(fd) <IRQ> <IRQ> perf_event_overflow() perf_event_overflow() task_work_add(perf_pending_task) task_work_add(perf_pending_task) </IRQ> </IRQ> fput() fput() task_work_add(____fput()) task_work_add(____fput()) task_work_run() task_work_run() ____fput() ____fput() perf_release() perf_release() perf_event_release_kernel() perf_event_release_kernel() _free_event() _free_event() perf_pending_task_sync() perf_pending_task_sync() rcuwait_wait_event() rcuwait_wait_event() Therefore the only option left is to acquire the event reference count upon queueing the perf task work and release it from the task work, just like it was done before 3a5465418f5f ("perf: Fix event leak upon exec and file release") but without the leaks it fixed. Some adjustments are necessary to make it work: * A child event might dereference its parent upon freeing. Care must be taken to release the parent last. * Some places assuming the event doesn't have any reference held and therefore can be freed right away must instead put the reference and let the reference counting to its job.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid infinite loop trying to resize local TT If the MTU of one of an attached interface becomes too small to transmit the local translation table then it must be resized to fit inside all fragments (when enabled) or a single packet. But if the MTU becomes too low to transmit even the header + the VLAN specific part then the resizing of the local TT will never succeed. This can for example happen when the usable space is 110 bytes and 11 VLANs are on top of batman-adv. In this case, at least 116 byte would be needed. There will just be an endless spam of batman_adv: batadv0: Forced to purge local tt entries to fit new maximum fragment MTU (110) in the log but the function will never finish. Problem here is that the timeout will be halved all the time and will then stagnate at 0 and therefore never be able to reduce the table even more. There are other scenarios possible with a similar result. The number of BATADV_TT_CLIENT_NOPURGE entries in the local TT can for example be too high to fit inside a packet. Such a scenario can therefore happen also with only a single VLAN + 7 non-purgable addresses - requiring at least 120 bytes. While this should be handled proactively when: * interface with too low MTU is added * VLAN is added * non-purgeable local mac is added * MTU of an attached interface is reduced * fragmentation setting gets disabled (which most likely requires dropping attached interfaces) not all of these scenarios can be prevented because batman-adv is only consuming events without the the possibility to prevent these actions (non-purgable MAC address added, MTU of an attached interface is reduced). It is therefore necessary to also make sure that the code is able to handle also the situations when there were already incompatible system configuration are present.

In the Linux kernel, the following vulnerability has been resolved: team: Move team device type change at the end of team_port_add Attempting to add a port device that is already up will expectedly fail, but not before modifying the team device header_ops. In the case of the syzbot reproducer the gre0 device is already in state UP when it attempts to add it as a port device of team0, this fails but before that header_ops->create of team0 is changed from eth_header to ipgre_header in the call to team_dev_type_check_change. Later when we end up in ipgre_header() struct ip_tunnel* points to nonsense as the private data of the device still holds a struct team. Example sequence of iproute2 commands to reproduce the hang/BUG(): ip link add dev team0 type team ip link add dev gre0 type gre ip link set dev gre0 up ip link set dev gre0 master team0 ip link set dev team0 up ping -I team0 1.1.1.1 Move team_dev_type_check_change down where all other checks have passed as it changes the dev type with no way to restore it in case one of the checks that follow it fail. Also make sure to preserve the origial mtu assignment: - If port_dev is not the same type as dev, dev takes mtu from port_dev - If port_dev is the same type as dev, port_dev takes mtu from dev This is done by adding a conditional before the call to dev_set_mtu to prevent it from assigning port_dev->mtu = dev->mtu and instead letting team_dev_type_check_change assign dev->mtu = port_dev->mtu. The conditional is needed because the patch moves the call to team_dev_type_check_change past dev_set_mtu. Testing: - team device driver in-tree selftests - Add/remove various devices as slaves of team device - syzbot

In the Linux kernel, the following vulnerability has been resolved: net: ntb_netdev: Move ntb_netdev_rx_handler() to call netif_rx() from __netif_rx() The following is emitted when using idxd (DSA) dmanegine as the data mover for ntb_transport that ntb_netdev uses. [74412.546922] BUG: using smp_processor_id() in preemptible [00000000] code: irq/52-idxd-por/14526 [74412.556784] caller is netif_rx_internal+0x42/0x130 [74412.562282] CPU: 6 PID: 14526 Comm: irq/52-idxd-por Not tainted 6.9.5 #5 [74412.569870] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.E9I.1752.P05.2402080856 02/08/2024 [74412.581699] Call Trace: [74412.584514] <TASK> [74412.586933] dump_stack_lvl+0x55/0x70 [74412.591129] check_preemption_disabled+0xc8/0xf0 [74412.596374] netif_rx_internal+0x42/0x130 [74412.600957] __netif_rx+0x20/0xd0 [74412.604743] ntb_netdev_rx_handler+0x66/0x150 [ntb_netdev] [74412.610985] ntb_complete_rxc+0xed/0x140 [ntb_transport] [74412.617010] ntb_rx_copy_callback+0x53/0x80 [ntb_transport] [74412.623332] idxd_dma_complete_txd+0xe3/0x160 [idxd] [74412.628963] idxd_wq_thread+0x1a6/0x2b0 [idxd] [74412.634046] irq_thread_fn+0x21/0x60 [74412.638134] ? irq_thread+0xa8/0x290 [74412.642218] irq_thread+0x1a0/0x290 [74412.646212] ? __pfx_irq_thread_fn+0x10/0x10 [74412.651071] ? __pfx_irq_thread_dtor+0x10/0x10 [74412.656117] ? __pfx_irq_thread+0x10/0x10 [74412.660686] kthread+0x100/0x130 [74412.664384] ? __pfx_kthread+0x10/0x10 [74412.668639] ret_from_fork+0x31/0x50 [74412.672716] ? __pfx_kthread+0x10/0x10 [74412.676978] ret_from_fork_asm+0x1a/0x30 [74412.681457] </TASK> The cause is due to the idxd driver interrupt completion handler uses threaded interrupt and the threaded handler is not hard or soft interrupt context. However __netif_rx() can only be called from interrupt context. Change the call to netif_rx() in order to allow completion via normal context for dmaengine drivers that utilize threaded irq handling. While the following commit changed from netif_rx() to __netif_rx(), baebdf48c360 ("net: dev: Makes sure netif_rx() can be invoked in any context."), the change should've been a noop instead. However, the code precedes this fix should've been using netif_rx_ni() or netif_rx_any_context().

In the Linux kernel, the following vulnerability has been resolved: closures: Change BUG_ON() to WARN_ON() If a BUG_ON() can be hit in the wild, it shouldn't be a BUG_ON() For reference, this has popped up once in the CI, and we'll need more info to debug it: 03240 ------------[ cut here ]------------ 03240 kernel BUG at lib/closure.c:21! 03240 kernel BUG at lib/closure.c:21! 03240 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP 03240 Modules linked in: 03240 CPU: 15 PID: 40534 Comm: kworker/u80:1 Not tainted 6.10.0-rc4-ktest-ga56da69799bd #25570 03240 Hardware name: linux,dummy-virt (DT) 03240 Workqueue: btree_update btree_interior_update_work 03240 pstate: 00001005 (nzcv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--) 03240 pc : closure_put+0x224/0x2a0 03240 lr : closure_put+0x24/0x2a0 03240 sp : ffff0000d12071c0 03240 x29: ffff0000d12071c0 x28: dfff800000000000 x27: ffff0000d1207360 03240 x26: 0000000000000040 x25: 0000000000000040 x24: 0000000000000040 03240 x23: ffff0000c1f20180 x22: 0000000000000000 x21: ffff0000c1f20168 03240 x20: 0000000040000000 x19: ffff0000c1f20140 x18: 0000000000000001 03240 x17: 0000000000003aa0 x16: 0000000000003ad0 x15: 1fffe0001c326974 03240 x14: 0000000000000a1e x13: 0000000000000000 x12: 1fffe000183e402d 03240 x11: ffff6000183e402d x10: dfff800000000000 x9 : ffff6000183e402e 03240 x8 : 0000000000000001 x7 : 00009fffe7c1bfd3 x6 : ffff0000c1f2016b 03240 x5 : ffff0000c1f20168 x4 : ffff6000183e402e x3 : ffff800081391954 03240 x2 : 0000000000000001 x1 : 0000000000000000 x0 : 00000000a8000000 03240 Call trace: 03240 closure_put+0x224/0x2a0 03240 bch2_check_for_deadlock+0x910/0x1028 03240 bch2_six_check_for_deadlock+0x1c/0x30 03240 six_lock_slowpath.isra.0+0x29c/0xed0 03240 six_lock_ip_waiter+0xa8/0xf8 03240 __bch2_btree_node_lock_write+0x14c/0x298 03240 bch2_trans_lock_write+0x6d4/0xb10 03240 __bch2_trans_commit+0x135c/0x5520 03240 btree_interior_update_work+0x1248/0x1c10 03240 process_scheduled_works+0x53c/0xd90 03240 worker_thread+0x370/0x8c8 03240 kthread+0x258/0x2e8 03240 ret_from_fork+0x10/0x20 03240 Code: aa1303e0 d63f0020 a94363f7 17ffff8c (d4210000) 03240 ---[ end trace 0000000000000000 ]--- 03240 Kernel panic - not syncing: Oops - BUG: Fatal exception 03240 SMP: stopping secondary CPUs 03241 SMP: failed to stop secondary CPUs 13,15 03241 Kernel Offset: disabled 03241 CPU features: 0x00,00000003,80000008,4240500b 03241 Memory Limit: none 03241 ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception ]--- 03246 ========= FAILED TIMEOUT copygc_torture_no_checksum in 7200s

In the Linux kernel, the following vulnerability has been resolved: pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map() If we fail to allocate propname buffer, we need to drop the reference count we just took. Because the pinctrl_dt_free_maps() includes the droping operation, here we call it directly.

The n_tty_write function in drivers/tty/n_tty.c in the Linux kernel through 3.14.3 does not properly manage tty driver access in the "LECHO & !OPOST" case, which allows local users to cause a denial of service (memory corruption and system crash) or gain privileges by triggering a race condition involving read and write operations with long strings.

In the Linux kernel, the following vulnerability has been resolved: phonet: fix rtm_phonet_notify() skb allocation fill_route() stores three components in the skb: - struct rtmsg - RTA_DST (u8) - RTA_OIF (u32) Therefore, rtm_phonet_notify() should use NLMSG_ALIGN(sizeof(struct rtmsg)) + nla_total_size(1) + nla_total_size(4)

In the Linux kernel, the following vulnerability has been resolved: net: flow_dissector: use DEBUG_NET_WARN_ON_ONCE The following splat is easy to reproduce upstream as well as in -stable kernels. Florian Westphal provided the following commit: d1dab4f71d37 ("net: add and use __skb_get_hash_symmetric_net") but this complementary fix has been also suggested by Willem de Bruijn and it can be easily backported to -stable kernel which consists in using DEBUG_NET_WARN_ON_ONCE instead to silence the following splat given __skb_get_hash() is used by the nftables tracing infrastructure to to identify packets in traces. [69133.561393] ------------[ cut here ]------------ [69133.561404] WARNING: CPU: 0 PID: 43576 at net/core/flow_dissector.c:1104 __skb_flow_dissect+0x134f/ [...] [69133.561944] CPU: 0 PID: 43576 Comm: socat Not tainted 6.10.0-rc7+ #379 [69133.561959] RIP: 0010:__skb_flow_dissect+0x134f/0x2ad0 [69133.561970] Code: 83 f9 04 0f 84 b3 00 00 00 45 85 c9 0f 84 aa 00 00 00 41 83 f9 02 0f 84 81 fc ff ff 44 0f b7 b4 24 80 00 00 00 e9 8b f9 ff ff <0f> 0b e9 20 f3 ff ff 41 f6 c6 20 0f 84 e4 ef ff ff 48 8d 7b 12 e8 [69133.561979] RSP: 0018:ffffc90000006fc0 EFLAGS: 00010246 [69133.561988] RAX: 0000000000000000 RBX: ffffffff82f33e20 RCX: ffffffff81ab7e19 [69133.561994] RDX: dffffc0000000000 RSI: ffffc90000007388 RDI: ffff888103a1b418 [69133.562001] RBP: ffffc90000007310 R08: 0000000000000000 R09: 0000000000000000 [69133.562007] R10: ffffc90000007388 R11: ffffffff810cface R12: ffff888103a1b400 [69133.562013] R13: 0000000000000000 R14: ffffffff82f33e2a R15: ffffffff82f33e28 [69133.562020] FS: 00007f40f7131740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000 [69133.562027] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [69133.562033] CR2: 00007f40f7346ee0 CR3: 000000015d200001 CR4: 00000000001706f0 [69133.562040] Call Trace: [69133.562044] <IRQ> [69133.562049] ? __warn+0x9f/0x1a0 [ 1211.841384] ? __skb_flow_dissect+0x107e/0x2860 [...] [ 1211.841496] ? bpf_flow_dissect+0x160/0x160 [ 1211.841753] __skb_get_hash+0x97/0x280 [ 1211.841765] ? __skb_get_hash_symmetric+0x230/0x230 [ 1211.841776] ? mod_find+0xbf/0xe0 [ 1211.841786] ? get_stack_info_noinstr+0x12/0xe0 [ 1211.841798] ? bpf_ksym_find+0x56/0xe0 [ 1211.841807] ? __rcu_read_unlock+0x2a/0x70 [ 1211.841819] nft_trace_init+0x1b9/0x1c0 [nf_tables] [ 1211.841895] ? nft_trace_notify+0x830/0x830 [nf_tables] [ 1211.841964] ? get_stack_info+0x2b/0x80 [ 1211.841975] ? nft_do_chain_arp+0x80/0x80 [nf_tables] [ 1211.842044] nft_do_chain+0x79c/0x850 [nf_tables]

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when devlink reload during pf initialization The devlink reload process will access the hardware resources, but the register operation is done before the hardware is initialized. So, processing the devlink reload during initialization may lead to kernel crash. This patch fixes this by taking devl_lock during initialization.

In the Linux kernel, the following vulnerability has been resolved: dyndbg: fix old BUG_ON in >control parser Fix a BUG_ON from 2009. Even if it looks "unreachable" (I didn't really look), lets make sure by removing it, doing pr_err and return -EINVAL instead.

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix nfsd4_encode_fattr4() crasher Ensure that args.acl is initialized early. It is used in an unconditional call to kfree() on the way out of nfsd4_encode_fattr4().

In the Linux kernel, the following vulnerability has been resolved: Revert "media: v4l2-ctrls: show all owned controls in log_status" This reverts commit 9801b5b28c6929139d6fceeee8d739cc67bb2739. This patch introduced a potential deadlock scenario: [Wed May 8 10:02:06 2024] Possible unsafe locking scenario: [Wed May 8 10:02:06 2024] CPU0 CPU1 [Wed May 8 10:02:06 2024] ---- ---- [Wed May 8 10:02:06 2024] lock(vivid_ctrls:1620:(hdl_vid_cap)->_lock); [Wed May 8 10:02:06 2024] lock(vivid_ctrls:1608:(hdl_user_vid)->_lock); [Wed May 8 10:02:06 2024] lock(vivid_ctrls:1620:(hdl_vid_cap)->_lock); [Wed May 8 10:02:06 2024] lock(vivid_ctrls:1608:(hdl_user_vid)->_lock); For now just revert.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: range check cp bad op exception interrupts Due to a CP interrupt bug, bad packet garbage exception codes are raised. Do a range check so that the debugger and runtime do not receive garbage codes. Update the user api to guard exception code type checking as well.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Initialize allocated memory before use KMSAN reports: Multiple uninitialized values detected: - KMSAN: uninit-value in ntfs_read_hdr (3) - KMSAN: uninit-value in bcmp (3) Memory is allocated by __getname(), which is a wrapper for kmem_cache_alloc(). This memory is used before being properly cleared. Change kmem_cache_alloc() to kmem_cache_zalloc() to properly allocate and clear memory before use.

In the Linux kernel before 5.17.2, drivers/soc/qcom/qcom_aoss.c does not release an of_find_device_by_node reference after use, e.g., with put_device.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: fix deadlock in create_pinctrl() when handling -EPROBE_DEFER In create_pinctrl(), pinctrl_maps_mutex is acquired before calling add_setting(). If add_setting() returns -EPROBE_DEFER, create_pinctrl() calls pinctrl_free(). However, pinctrl_free() attempts to acquire pinctrl_maps_mutex, which is already held by create_pinctrl(), leading to a potential deadlock. This patch resolves the issue by releasing pinctrl_maps_mutex before calling pinctrl_free(), preventing the deadlock. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc.

In the Linux kernel, the following vulnerability has been resolved: fs/9p: only translate RWX permissions for plain 9P2000 Garbage in plain 9P2000's perm bits is allowed through, which causes it to be able to set (among others) the suid bit. This was presumably not the intent since the unix extended bits are handled explicitly and conditionally on .u.

Integer overflow in some Intel(R) Aptio* V UEFI Firmware Integrator Tools may allow an authenticated user to potentially enable denial of service via local access.

A memory leak in the ql_alloc_large_buffers() function in drivers/net/ethernet/qlogic/qla3xxx.c in the Linux kernel before 5.3.5 allows local users to cause a denial of service (memory consumption) by triggering pci_dma_mapping_error() failures, aka CID-1acb8f2a7a9f.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix uninitialized ratelimit_state->lock access in __ext4_fill_super() In the following concurrency we will access the uninitialized rs->lock: ext4_fill_super ext4_register_sysfs // sysfs registered msg_ratelimit_interval_ms // Other processes modify rs->interval to // non-zero via msg_ratelimit_interval_ms ext4_orphan_cleanup ext4_msg(sb, KERN_INFO, "Errors on filesystem, " __ext4_msg ___ratelimit(&(EXT4_SB(sb)->s_msg_ratelimit_state) if (!rs->interval) // do nothing if interval is 0 return 1; raw_spin_trylock_irqsave(&rs->lock, flags) raw_spin_trylock(lock) _raw_spin_trylock __raw_spin_trylock spin_acquire(&lock->dep_map, 0, 1, _RET_IP_) lock_acquire __lock_acquire register_lock_class assign_lock_key dump_stack(); ratelimit_state_init(&sbi->s_msg_ratelimit_state, 5 * HZ, 10); raw_spin_lock_init(&rs->lock); // init rs->lock here and get the following dump_stack: ========================================================= INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 12 PID: 753 Comm: mount Tainted: G E 6.7.0-rc6-next-20231222 #504 [...] Call Trace: dump_stack_lvl+0xc5/0x170 dump_stack+0x18/0x30 register_lock_class+0x740/0x7c0 __lock_acquire+0x69/0x13a0 lock_acquire+0x120/0x450 _raw_spin_trylock+0x98/0xd0 ___ratelimit+0xf6/0x220 __ext4_msg+0x7f/0x160 [ext4] ext4_orphan_cleanup+0x665/0x740 [ext4] __ext4_fill_super+0x21ea/0x2b10 [ext4] ext4_fill_super+0x14d/0x360 [ext4] [...] ========================================================= Normally interval is 0 until s_msg_ratelimit_state is initialized, so ___ratelimit() does nothing. But registering sysfs precedes initializing rs->lock, so it is possible to change rs->interval to a non-zero value via the msg_ratelimit_interval_ms interface of sysfs while rs->lock is uninitialized, and then a call to ext4_msg triggers the problem by accessing an uninitialized rs->lock. Therefore register sysfs after all initializations are complete to avoid such problems.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists() We can trigger a slab-out-of-bounds with the following commands: mkfs.ext4 -F /dev/$disk 10G mount /dev/$disk /tmp/test echo 2147483647 > /sys/fs/ext4/$disk/mb_group_prealloc echo test > /tmp/test/file && sync ================================================================== BUG: KASAN: slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4] Read of size 8 at addr ffff888121b9d0f0 by task kworker/u2:0/11 CPU: 0 PID: 11 Comm: kworker/u2:0 Tainted: GL 6.7.0-next-20240118 #521 Call Trace: dump_stack_lvl+0x2c/0x50 kasan_report+0xb6/0xf0 ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4] ext4_mb_regular_allocator+0x19e9/0x2370 [ext4] ext4_mb_new_blocks+0x88a/0x1370 [ext4] ext4_ext_map_blocks+0x14f7/0x2390 [ext4] ext4_map_blocks+0x569/0xea0 [ext4] ext4_do_writepages+0x10f6/0x1bc0 [ext4] [...] ================================================================== The flow of issue triggering is as follows: // Set s_mb_group_prealloc to 2147483647 via sysfs ext4_mb_new_blocks ext4_mb_normalize_request ext4_mb_normalize_group_request ac->ac_g_ex.fe_len = EXT4_SB(sb)->s_mb_group_prealloc ext4_mb_regular_allocator ext4_mb_choose_next_group ext4_mb_choose_next_group_best_avail mb_avg_fragment_size_order order = fls(len) - 2 = 29 ext4_mb_find_good_group_avg_frag_lists frag_list = &sbi->s_mb_avg_fragment_size[order] if (list_empty(frag_list)) // Trigger SOOB! At 4k block size, the length of the s_mb_avg_fragment_size list is 14, but an oversized s_mb_group_prealloc is set, causing slab-out-of-bounds to be triggered by an attempt to access an element at index 29. Add a new attr_id attr_clusters_in_group with values in the range [0, sbi->s_clusters_per_group] and declare mb_group_prealloc as that type to fix the issue. In addition avoid returning an order from mb_avg_fragment_size_order() greater than MB_NUM_ORDERS(sb) and reduce some useless loops.

A memory leak in the ccp_run_sha_cmd() function in drivers/crypto/ccp/ccp-ops.c in the Linux kernel through 5.3.9 allows attackers to cause a denial of service (memory consumption), aka CID-128c66429247.

An issue was discovered in the Linux kernel before 5.11.11. The user mode driver (UMD) has a copy_process() memory leak, related to a lack of cleanup steps in kernel/usermode_driver.c and kernel/bpf/preload/bpf_preload_kern.c, aka CID-f60a85cad677.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix loop termination condition in gss_free_in_token_pages() The in_token->pages[] array is not NULL terminated. This results in the following KASAN splat: KASAN: maybe wild-memory-access in range [0x04a2013400000008-0x04a201340000000f]

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix memory leak in tpm2_key_encode() 'scratch' is never freed. Fix this by calling kfree() in the success, and in the error case.

In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: extend minimum interval restriction to entire cycle too It is possible for syzbot to side-step the restriction imposed by the blamed commit in the Fixes: tag, because the taprio UAPI permits a cycle-time different from (and potentially shorter than) the sum of entry intervals. We need one more restriction, which is that the cycle time itself must be larger than N * ETH_ZLEN bit times, where N is the number of schedule entries. This restriction needs to apply regardless of whether the cycle time came from the user or was the implicit, auto-calculated value, so we move the existing "cycle == 0" check outside the "if "(!new->cycle_time)" branch. This way covers both conditions and scenarios. Add a selftest which illustrates the issue triggered by syzbot.

In the Linux kernel, the following vulnerability has been resolved: dm: Always split write BIOs to zoned device limits Any zoned DM target that requires zone append emulation will use the block layer zone write plugging. In such case, DM target drivers must not split BIOs using dm_accept_partial_bio() as doing so can potentially lead to deadlocks with queue freeze operations. Regular write operations used to emulate zone append operations also cannot be split by the target driver as that would result in an invalid writen sector value return using the BIO sector. In order for zoned DM target drivers to avoid such incorrect BIO splitting, we must ensure that large BIOs are split before being passed to the map() function of the target, thus guaranteeing that the limits for the mapped device are not exceeded. dm-crypt and dm-flakey are the only target drivers supporting zoned devices and using dm_accept_partial_bio(). In the case of dm-crypt, this function is used to split BIOs to the internal max_write_size limit (which will be suppressed in a different patch). However, since crypt_alloc_buffer() uses a bioset allowing only up to BIO_MAX_VECS (256) vectors in a BIO. The dm-crypt device max_segments limit, which is not set and so default to BLK_MAX_SEGMENTS (128), must thus be respected and write BIOs split accordingly. In the case of dm-flakey, since zone append emulation is not required, the block layer zone write plugging is not used and no splitting of BIOs required. Modify the function dm_zone_bio_needs_split() to use the block layer helper function bio_needs_zone_write_plugging() to force a call to bio_split_to_limits() in dm_split_and_process_bio(). This allows DM target drivers to avoid using dm_accept_partial_bio() for write operations on zoned DM devices.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix division by zero in setup_dsc_config When slice_height is 0, the division by slice_height in the calculation of the number of slices will cause a division by zero driver crash. This leaves the kernel in a state that requires a reboot. This patch adds a check to avoid the division by zero. The stack trace below is for the 6.8.4 Kernel. I reproduced the issue on a Z16 Gen 2 Lenovo Thinkpad with a Apple Studio Display monitor connected via Thunderbolt. The amdgpu driver crashed with this exception when I rebooted the system with the monitor connected. kernel: ? die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434 arch/x86/kernel/dumpstack.c:447) kernel: ? do_trap (arch/x86/kernel/traps.c:113 arch/x86/kernel/traps.c:154) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: ? do_error_trap (./arch/x86/include/asm/traps.h:58 arch/x86/kernel/traps.c:175) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: ? exc_divide_error (arch/x86/kernel/traps.c:194 (discriminator 2)) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: ? asm_exc_divide_error (./arch/x86/include/asm/idtentry.h:548) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: dc_dsc_compute_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1109) amdgpu After applying this patch, the driver no longer crashes when the monitor is connected and the system is rebooted. I believe this is the same issue reported for 3113.

Insufficient validation of the IOCTL (Input Output Control) input buffer in AMD μProf may allow an authenticated user to send an arbitrary buffer potentially resulting in a Windows crash leading to denial of service.

A use-after-free flaw was found in reconn_set_ipaddr_from_hostname in fs/cifs/connect.c in the Linux kernel. The issue occurs when it forgets to set the free pointer server->hostname to NULL, leading to an invalid pointer request.

A memory leak flaw and potential divide by zero and Integer overflow was found in the Linux kernel V4L2 and vivid test code functionality. This issue occurs when a user triggers ioctls, such as VIDIOC_S_DV_TIMINGS ioctl. This could allow a local user to crash the system if vivid test code enabled.

A use-after-free flaw was found in the Linux kernel’s core dump subsystem. This flaw allows a local user to crash the system. Only if patch 390031c94211 ("coredump: Use the vma snapshot in fill_files_note") not applied yet, then kernel could be affected.

The Linux kernel io_uring IORING_OP_SOCKET operation contained a double free in function __sys_socket_file() in file net/socket.c. This issue was introduced in da214a475f8bd1d3e9e7a19ddfeb4d1617551bab and fixed in 649c15c7691e9b13cbe9bf6c65c365350e056067.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: read txq->read_ptr under lock If we read txq->read_ptr without lock, we can read the same value twice, then obtain the lock, and reclaim from there to two different places, but crucially reclaim the same entry twice, resulting in the WARN_ONCE() a little later. Fix that by reading txq->read_ptr under lock.