An OS command injection vulnerability has been reported to affect Video Station. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following version: Video Station 5.7.2 ( 2023/11/23 ) and later

VPN Firewall developed by QNO Technology has an OS Command Injection vulnerability, allowing authenticated remote attackers to inject arbitrary OS commands and execute them on the server.

An OS command injection vulnerability exists in the httpd SNMP functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted HTTP response can lead to arbitrary command execution. An attacker can send a network request to trigger this vulnerability.

VPN Firewall developed by QNO Technology has an OS Command Injection vulnerability, allowing authenticated remote attackers to inject arbitrary OS commands and execute them on the server.

ASUS RT-AX55’s authentication-related function has a vulnerability of insufficient filtering of special characters within its token-generated module. An authenticated remote attacker can exploit this vulnerability to perform a Command Injection attack to execute arbitrary commands, disrupt the system, or terminate services.

D-link DIR-816 A2_v1.10CNB04.img is vulnerable to Command injection via /goform/form2userconfig.cgi.

A command execution vulnerability exists in the access control functionality of Netgear Orbi Router RBR750 4.6.8.5. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

On ASUS RT-AX55 3.0.0.4.386.51598 devices, authenticated attackers can perform OS command injection via the /start_apply.htm qos_bw_rulelist parameter. NOTE: for the similar "token-generated module" issue, see CVE-2023-41345; for the similar "token-refresh module" issue, see CVE-2023-41346; for the similar "check token module" issue, see CVE-2023-41347; and for the similar "code-authentication module" issue, see CVE-2023-41348.

OS command injection vulnerability in the CBC products allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter its settings. As for the affected products/versions, see the detailed information provided by the vendor. Note that NR4H, NR8H, NR16H series and DR-16F, DR-8F, DR-4F, DR-16H, DR-8H, DR-4H, DR-4M41 series are no longer supported, therefore updates for those products are not provided.

Comtrend VR-3033 DE11-416SSG-C01_R02.A2pvI042j1.d26m devices have Multiple Authenticated Command Injection vulnerabilities via the ping and traceroute diagnostic pages, as demonstrated by shell metacharacters in the pingIpAddress parameter to ping.cgi.

lib/ajaxHandlers/ajaxAddTemplate.php in rConfig through 3.94 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the fileName POST parameter.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysLogSettings API function, as demonstrated by shell metacharacters in the IPAddress field.

Openshift has shell command injection flaws due to unsanitized data being passed into shell commands.

Usermin through 1.850 allows a remote authenticated user to execute OS commands via command injection in a filename for the GPG module.

Digital Watchdog DW MEGApix IP cameras A7.2.2_20211029 was discovered to contain a command injection vulnerability in the component /admin/curltest.cgi. This vulnerability is exploitable via a crafted POST request.

An OS command injection vulnerability exists in the web interface /action/ipcamRecordPost functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9X and 6.9Z. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Command injection is possible in the puppetlabs-mysql module prior to version 13.0.0. A malicious actor is able to exploit this vulnerability only if they are able to provide unsanitized input to the module. This condition is rare in most deployments of Puppet and Puppet Enterprise.

An os command injection vulnerability exists in the aVideoEncoder wget functionality of WWBN AVideo 11.6 and dev master commit 3f7c0364. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can send an HTTP request to trigger this vulnerability.

An authenticated attacker can send a specially crafted route to the “edit_route.cgi” binary and have it execute shell commands. This vulnerability impacts products based on HID Mercury Intelligent Controllers LP1501, LP1502, LP2500, LP4502, and EP4502 which contain firmware versions prior to 1.303 for the LP series and 1.297 for the EP series. An attacker with this level of access on the device can monitor all communications sent to and from this device, modify onboard relays, change configuration files, or cause the device to become unstable.

OS command injection vulnerability in the "qs" procedure from the "utils" module in Chicken before 4.9.0.

Tenda ONT GPON AC1200 Dual band WiFi HG9 v1.0.1 is vulnerable to Command Injection via the Ping function.

mailcow is a mailserver suite. Prior to mailcow-dockerized version 2022-06a, an extended privilege vulnerability can be exploited by manipulating the custom parameters regexmess, skipmess, regexflag, delete2foldersonly, delete2foldersbutnot, regextrans2, pipemess, or maxlinelengthcmd to execute arbitrary code. Users should update their mailcow instances with the `update.sh` script in the mailcow root directory to 2022-06a or newer to receive a patch for this issue. As a temporary workaround, the Syncjob ACL can be removed from all mailbox users, preventing changes to those settings.

Nagios XI versions prior to 2012R1.6 contain a shell command injection vulnerability in the Auto-Discovery tool. User-controlled input is passed to a shell without adequate sanitation or argument quoting, allowing an authenticated user with access to discovery functionality to execute arbitrary commands with the privileges of the application service.

An OS command injection vulnerability exists in the web interface /action/iperf functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9X and 6.9Z. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

An OS command injection vulnerability exists in multiple D-Link routers—confirmed on DIR-300 rev A (v1.05) and DIR-615 rev D (v4.13)—via the authenticated tools_vct.xgi CGI endpoint. The web interface fails to properly sanitize user-supplied input in the pingIp parameter, allowing attackers with valid credentials to inject arbitrary shell commands. Exploitation enables full device compromise, including spawning a telnet daemon and establishing a root shell. The vulnerability is present in firmware versions that expose tools_vct.xgi and use the Mathopd/1.5p6 web server. No vendor patch is available, and affected models are end-of-life.

A Command Injection vulnerability exists in Vivotek PT7135 IP Cameras 0300a and 0400a via the system.ntp parameter to the farseer.out binary file, which cold let a malicious user execute arbitrary code.

Tenda Technology Co.,Ltd HG6 3.3.0-210926 was discovered to contain a command injection vulnerability via the pingAddr and traceAddr parameters. This vulnerability is exploited via a crafted POST request.

An improper neutralization of special elements used in an os command ('OS Command Injection') [CWE-78] in FortiWeb 7.0.0 through 7.0.1, 6.3.0 through 6.3.19, 6.4 all versions may allow an authenticated attacker to execute arbitrary shell code as `root` user via crafted HTTP requests.

Polycom HDX Video End Points before 3.0.4 and UC APL before 2.7.1.J allows remote authenticated users to execute arbitrary commands as demonstrated by a ; (semicolon) to the ping command feature.

Certain models of NVR developed by Digiever has an OS Command Injection vulnerability, allowing authenticated remote attackers to inject arbitrary OS commands and execute them on the device.

USU Oracle Optimization before 5.17.5 allows authenticated DataCollection users to achieve agent root access because some common OS commands are blocked but (for example) an OS command for base64 decoding is not blocked. NOTE: this is not an Oracle Corporation product.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability that was caused by a command that read files from a privileged location and created a system command without sanitizing the read data. This command could be triggered by an attacker remotely to cause code execution and gain a reverse shell in Western Digital My Cloud OS 5 devices.This issue affects My Cloud OS 5: before 5.26.119.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "week" parameter in setScheduleCfg.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "sMinute" parameter in setWiFiScheduleCfg.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "sHour" parameter in setWiFiScheduleCfg.

D-Link DIR-865L Ax 1.20B01 Beta devices allow Command Injection.

In QuickBox Community Edition through 2.5.5 and Pro Edition through 2.1.8, the local www-data user can execute sudo mysql without a password, which means that the www-data user can execute arbitrary OS commands via the mysql -e option.

A vulnerability in the web-based management interface of Cisco Identity Services Engine could allow an authenticated, remote attacker to inject arbitrary commands on the underlying operating system. This vulnerability is due to improper validation of user input within requests as part of the web-based management interface. An attacker could exploit this vulnerability by manipulating requests to the web-based management interface to contain operating system commands. A successful exploit could allow the attacker to execute arbitrary operating system commands on the underlying operating system with the privileges of the web services user. Cisco has not yet released software updates that address this vulnerability.

NETGEAR R8500 1.0.2.158 devices allow remote authenticated users to execute arbitrary commands (such as telnetd) via shell metacharacters in the sysNewPasswd and sysConfirmPasswd parameters to admin_account.cgi.

Tenda AX1806 v1.0.0.1 was discovered to contain a command injection vulnerability in `SetIPv6Status` function

Verizon 5G Home LVSKIHP OutDoorUnit (ODU) 3.33.101.0 does not property sanitize user-controlled parameters within the DMACC URLs on the Settings page of the Engineering portal. An authenticated remote attacker on the local network can inject shell metacharacters into /usr/lib/lua/5.1/luci/controller/admin/settings.lua to achieve remote code execution as root.

A security agent manual scan command injection vulnerability in the Trend Micro Deep Security 20 Agent could allow an attacker to escalate privileges and execute arbitrary code on an affected machine. In certain circumstances, attackers that have legitimate access to the domain may be able to remotely inject commands to other machines in the same domain. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability locally and must have domain user privileges to affect other machines.

SEPPmail through 12.1.17 allows command injection within the Admin Portal. An authenticated attacker is able to execute arbitrary code in the context of the user root.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doIPSec function.

IBM Security Verify Directory 10.0.0 through 10.0.3 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doPPPo function.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 and 8.5.0 through 8.5.4 allows attacker to execute unauthorized code or commands via specifically crafted HTTP get request parameters.

In PHP versions 8.1.* before 8.1.29, 8.2.* before 8.2.20, 8.3.* before 8.3.8, the fix for CVE-2024-1874 does not work if the command name includes trailing spaces. Original issue: when using proc_open() command with array syntax, due to insufficient escaping, if the arguments of the executed command are controlled by a malicious user, the user can supply arguments that would execute arbitrary commands in Windows shell.

IBM App Connect Enterprise Certified Container 11.4, 11.5, 11.6, 12.0, 12.1, 12.2, and 12.3 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request.

An OS Command Injection vulnerability in the configuration parser of Eve-NG Professional through 4.0.1-65 and Eve-NG Community through 2.0.3-112 allows a remote authenticated attacker to execute commands as root by editing virtualization command parameters of imported UNL files.