Two heap-based buffer overflow vulnerabilities exist in the httpd manage_post functionality of Yifan YF325 v1.0_20221108. A specially crafted network request can lead to a heap buffer overflow. An attacker can send a network request to trigger these vulnerabilities.This integer overflow result is used as argument for the malloc function.
In eatt_l2cap_reconfig_completed of eatt_impl.h, there is a possible out of bounds write due to an integer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.
Where this vulnerability exists in the Rockwell Automation 1756 EN2* and 1756 EN3* ControlLogix communication products, it could allow a malicious user to perform remote code execution with persistence on the target system through maliciously crafted CIP messages. This includes the ability to modify, deny, and exfiltrate data passing through the device.
A vulnerability, which was classified as critical, was found in Tenda CH22 1.0.0.1. This affects the function formNatlimit of the file /goform/Natlimit. The manipulation of the argument page leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
there is a possible out of bounds write due to buffer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.
TOTOLINK NR1800X V9.1.0u.6279_B20210910 was discovered to contain a stack overflow via the http_host parameter in the function loginAuth.
Command injection and multiple stack-based buffer overflows vulnerabilities in the Login_handler_func function of spx_restservice allow an attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.
Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP bulk get request response encoding function. The function parsing the received SNMP request does not verify the input message's requested variables against the capacity of the internal SNMP engine buffer. When a bulk get request response is assembled, a stack buffer dedicated for OIDs (with a limited capacity) is allocated in snmp_engine_get_bulk(). When snmp_engine_get_bulk() is populating the stack buffer, an overflow condition may occur due to lack of input length validation. This makes it possible to overwrite stack regions beyond the allocated buffer, including the return address from the function. As a result, the code execution path may be redirected to an address provided in the SNMP bulk get payload. If the target architecture uses common addressing space for program and data memory, it may also be possible to supply code in the SNMP request payload, and redirect the execution path to the remotely injected code, by modifying the function's return address.
Two heap-based buffer overflow vulnerabilities exist in the httpd manage_post functionality of Yifan YF325 v1.0_20221108. A specially crafted network request can lead to a heap buffer overflow. An attacker can send a network request to trigger these vulnerabilities.This integer overflow result is used as argument for the realloc function.
Tenda AC10 v4 US_AC10V4.0si_V16.03.10.13_cn was discovered to contain a stack overflow via parameter time at /goform/saveParentControlInfo.
RIOT-OS, an operating system for Internet of Things (IoT) devices, contains a network stack with the ability to process 6LoWPAN frames. In version 2023.01 and prior, an attacker can send a crafted frame to the device resulting in an out of bounds write in the packet buffer. The overflow can be used to corrupt other packets and the allocator metadata. Corrupting a pointer will easily lead to denial of service. While carefully manipulating the allocator metadata gives an attacker the possibility to write data to arbitrary locations and thus execute arbitrary code. This issue is fixed in pull request 19680. As a workaround, disable support for fragmented IP datagrams.
Memory safety bugs present in Firefox 113, Firefox ESR 102.11, and Thunderbird 102.12. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox ESR < 102.12, Firefox < 114, and Thunderbird < 102.12.
All versions of GE Digital CIMPLICITY that are not adhering to SDG guidance and accepting documents from untrusted sources are vulnerable to memory corruption issues due to insufficient input validation, including issues such as out-of-bounds reads and writes, use-after-free, stack-based buffer overflows, uninitialized pointers, and a heap-based buffer overflow. Successful exploitation could allow an attacker to execute arbitrary code.
A stack-based buffer overflow vulnerability exists in the httpd gwcfg.cgi get functionality of Yifan YF325 v1.0_20221108. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability.
cpdb-libs provides frontend and backend libraries for the Common Printing Dialog Backends (CPDB) project. In versions 1.0 through 2.0b4, cpdb-libs is vulnerable to buffer overflows via improper use of `scanf(3)`. cpdb-libs uses the `fscanf()` and `scanf()` functions to parse command lines and configuration files, dropping the read string components into fixed-length buffers, but does not limit the length of the strings to be read by `fscanf()` and `scanf()` causing buffer overflows when a string is longer than 1023 characters. A patch for this issue is available at commit f181bd1f14757c2ae0f17cc76dc20421a40f30b7. As all buffers have a length of 1024 characters, the patch limits the maximum string length to be read to 1023 by replacing all occurrences of `%s` with `%1023s` in all calls of the `fscanf()` and `scanf()` functions.
rAthena is an open-source cross-platform massively multiplayer online role playing game (MMORPG) server. Versions prior to commit 2f5248b have a heap-based buffer overflow in the login server, remote attacker to overwrite adjacent session fields by sending a crafted `CA_SSO_LOGIN_REQ` with an oversized token length. This leads to immediate denial of service (crash) and it is possible to achieve remote code execution via heap corruption. Commit 2f5248b fixes the issue.
A buffer overflow was discovered in Progress DataDirect Connect for ODBC before 08.02.2770 for Oracle. An overly large value for certain options of a connection string may overrun the buffer allocated to process the string value. This allows an attacker to execute code of their choice on an affected host by copying carefully selected data that will be executed as code.
Softing Industrial Automation all versions prior to the latest build of version 4.47.0, The affected product is vulnerable to a heap-based buffer overflow, which may allow an attacker to remotely execute arbitrary code.
A stack-based buffer overflow vulnerability exists in the libutils.so nvram_restore functionality of Yifan YF325 v1.0_20221108. A specially crafted network request can lead to a buffer overflow. An attacker can send a network request to trigger this vulnerability.
A stack-based buffer overflow vulnerability in Opto 22 PAC Control Basic and PAC Control Professional versions R10.0a and prior may allow remote code execution.
A stack-based overflow vulnerability [CWE-124] in Fortinet FortiOS version 7.0.0 through 7.0.10 and 7.2.0 through 7.2.3 and FortiProxy version 7.0.0 through 7.0.9 and 7.2.0 through 7.2.2 allows a remote unauthenticated attacker to execute arbitrary code or command via crafted packets reaching proxy policies or firewall policies with proxy mode alongside deep or full packet inspection.
Tenda AC8V4.0-V16.03.34.06 was discovered to contain a stack overflow via the deviceId parameter in the saveParentControlInfo function.
Tenda AC8V4.0-V16.03.34.06 was discovered to contain a stack overflow via the time parameter in the get_parentControl_list_Info function.
Tenda AC8V4.0-V16.03.34.06 was discovered to contain a stack overflow via the time parameter in the sub_4a79ec function.
When handling contactless cards, usage of a specific function to get additional information from the card which doesn't check the boundary on the data received while reading. This allows a stack-based buffer overflow that could lead to a potential Remote Code Execution on the targeted device
Memory corruption in WLAN Firmware while parsing a NAN management frame carrying a S3 attribute.
The Parameter Zone Read and Parameter Zone Write command handlers allow performing a Stack buffer overflow. This could potentially lead to a Remote Code execution on the targeted device.
When reading DesFire keys, the function that reads the card isn't properly checking the boundaries when copying internally the data received. This allows a heap based buffer overflow that could lead to a potential Remote Code Execution on the targeted device. This is especially problematic if you use Default DESFire key.
Tenda AC8V4.0-V16.03.34.06 was discovered to contain a stack overflow via the timeZone parameter in the sub_44db3c function.
A heap-based buffer overflow vulnerability exists in the create_png_object functionality of Accusoft ImageGear 20.1. A specially crafted malformed file can lead to memory corruption. An attacker can provide a malicious file to trigger this vulnerability.
Connected IO v2.1.0 and prior has a stack-based buffer overflow vulnerability in its communication protocol, enabling attackers to take control over devices.
Memory corruption in WLAN Firmware while doing a memory copy of pmk cache.
During the retrofit validation process, the firmware doesn't properly check the boundaries while copying some attributes to check. This allows a stack-based buffer overflow that could lead to a potential Remote Code Execution on the targeted device
An attacker can send a specially crafted message to the Wavelink Avalanche Manager, which could result in service disruption or arbitrary code execution. Thanks to a Researcher at Tenable for finding and reporting. Fixed in version 6.4.1.
Tenda AC8V4.0-V16.03.34.06 was discovered to contain a stack overflow via the firewallEn parameter in the formSetFirewallCfg function.
The handler of the retrofit validation command doesn't properly check the boundaries when performing certain validation operations. This allows a stack-based buffer overflow that could lead to a potential Remote Code Execution on the targeted device
SmartDNS through 41 before 56d0332 allows an out-of-bounds write because of a stack-based buffer overflow in the _dns_encode_domain function in the dns.c file, via a crafted DNS request.
Mozilla developers and community members Ronald Crane, Andrew McCreight, Randell Jesup and the Mozilla Fuzzing Team reported memory safety bugs present in Firefox 112. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 113.
A vulnerability was found in D-Link DIR-816 1.10CNB05. It has been declared as critical. This vulnerability affects the function QoSPortSetup of the file /goform/QoSPortSetup. The manipulation of the argument port0_group/port0_remarker/ssid0_group/ssid0_remarker leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
TP-Link Archer AX21(US)_V3_1.1.4 Build 20230219 and AX21(US)_V3.6_1.1.4 Build 20230219 are vulnerable to Buffer Overflow.
An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. imap/message.c has a stack-based buffer overflow for a FETCH response with a long INTERNALDATE field.
Hyland Perceptive Filters releases before 2023-12-08 (e.g., 11.4.0.2647), as used in Cisco IronPort Email Security Appliance Software, Cisco Secure Email Gateway, and various non-Cisco products, allow attackers to trigger a segmentation fault and execute arbitrary code via a crafted document.
An out-of-bounds write vulnerability exists in the tiff_planar_adobe functionality of Accusoft ImageGear 20.1. A specially crafted malformed file can lead to memory corruption. An attacker can provide a malicious file to trigger this vulnerability.
A memory corruption vulnerability exists in the HTTP Server Host header parsing functionality of Weston Embedded uC-HTTP v3.01.01. A specially crafted network packet can lead to code execution. An attacker can send a malicious packet to trigger this vulnerability.
A vulnerability was found in D-Link DIR-816 1.10CNB05 and classified as critical. Affected by this issue is the function wirelessApcli_5g of the file /goform/wirelessApcli_5g. The manipulation of the argument apcli_mode_5g/apcli_enc_5g/apcli_default_key_5g leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
Fuji Electric V-Server 4.0.3.0 and prior, A stack-based buffer overflow vulnerability has been identified, which may allow remote code execution.
A stack-based buffer overflow vulnerability was found in the ASUSTOR Data Master (ADM) due to the lack of data size validation. An attacker can exploit this vulnerability to execute arbitrary code. Affected ADM versions include: 4.0.6.REG2, 4.1.0 and below as well as 4.2.0.RE71 and below.
In Tenda AC15 V15.03.05.19, The function "xkjs_ver32" contains a stack-based buffer overflow vulnerability.
NVIDIA DGX A100 BMC contains a vulnerability in the host KVM daemon, where an unauthenticated attacker may cause stack memory corruption by sending a specially crafted network packet. A successful exploit of this vulnerability may lead to arbitrary code execution, denial of service, information disclosure, and data tampering.
In Tenda AC15 V15.03.05.19, the function "sub_ED14" contains a stack-based buffer overflow vulnerability.