Heap buffer overflow can occur while parsing invalid MKV clip which is not standard and have invalid vorbis codec data in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8064, APQ8096AU, APQ8098, MDM9206, MDM9207C, MDM9607, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8939, MSM8940, MSM8953, MSM8996, MSM8996AU, MSM8998, Nicobar, QCS605, QM215, Rennell, SA6155P, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDX20, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

A flaw was found in htmldoc before v1.9.12. Heap buffer overflow in pspdf_prepare_outpages(), in ps-pdf.cxx may lead to execute arbitrary code and denial of service.

Ricoh SP C250DN 1.05 devices allow denial of service (issue 2 of 3). Unauthenticated crafted packets to the IPP service will cause a vulnerable device to crash. A memory corruption has been identified in the way of how the embedded device parsed the IPP packets

webadmin.c in 3proxy before 0.8.13 has an out-of-bounds write in the admin interface.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Canon imageCLASS MF644Cdw 10.02 printers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the implementation of the SLP protocol. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-15845.

The set_ipv6() function in zscan_rfc1035.rl in gdnsd before 2.4.3 and 3.x before 3.2.1 has a stack-based buffer overflow via a long and malformed IPv6 address in zone data.

In Pixel cellular firmware, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-240662453References: N/A

Buffer over-write when this 0-byte buffer is typecasted to some other structure and hence memory corruption in Snapdragon Auto, Snapdragon Consumer IOT, Snapdragon Mobile in QCS605, SA6155P, SM8150

There exists an out of bounds read/write in LibJXL versions prior to commit 9cc451b91b74ba470fd72bd48c121e9f33d24c99. The JPEG decoder used by the JPEG XL encoder when doing JPEG recompression (i.e. if using JxlEncoderAddJPEGFrame on untrusted input) does not properly check bounds in the presence of incomplete codes. This could lead to an out-of-bounds write. In jpegli which is released as part of the same project, the same vulnerability is present. However, the relevant buffer is part of a bigger structure, and the code makes no assumptions on the values that could be overwritten. The issue could however cause jpegli to read uninitialised memory, or addresses of functions.

ZTE MF971R product has two stack-based buffer overflow vulnerabilities. An attacker could exploit the vulnerabilities to execute arbitrary code.

A stack-based buffer overflow vulnerability exists in the confsrv confctl_set_app_language functionality of TCL LinkHub Mesh Wi-Fi MS1G_00_01.00_14. A specially-crafted network packet can lead to stack-based buffer overflow. An attacker can send a malicious packet to trigger this vulnerability.

Out of bound write can occur in radio measurement request if STA receives multiple invalid rrm measurement request from AP in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music in APQ8053, APQ8096AU, MSM8998, Nicobar, QCA6574AU, QCS605, Rennell, SA6155P, Saipan, SC8180X, SDM660, SDM710, SDM845, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SM8250, SXR2130

An issue was discovered in Marvell 88W8688 Wi-Fi firmware before version p52, as used on Tesla Model S/X vehicles manufactured before March 2018, via the Parrot Faurecia Automotive FC6050W module. A stack overflow could lead to denial of service or arbitrary code execution.

A heap-based buffer overflow vulnerability exists in the XML Decompression LabelDict::Load functionality of AT&T Labs’ Xmill 0.7. A specially crafted XMI file can lead to remote code execution. An attacker can provide a malicious file to trigger this vulnerability.

A heap-based buffer overflow vulnerability exists in the XML Decompression PlainTextUncompressor::UncompressItem functionality of AT&T Labs’ Xmill 0.7. A specially crafted XMI file can lead to remote code execution. An attacker can provide a malicious file to trigger this vulnerability.

A vulnerability was found in Tenda W6 1.0.0.9(4122). It has been declared as critical. Affected by this vulnerability is the function formSetCfm of the file /goform/setcfm of the component httpd. The manipulation of the argument funcpara1 leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252259. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A heap-based buffer overflow vulnerability exists in the XML Decompression EnumerationUncompressor::UncompressItem functionality of AT&T Labs’ Xmill 0.7. A specially crafted XMI file can lead to remote code execution. An attacker can provide a malicious file to trigger this vulnerability.

musl libc through 1.1.23 has an x87 floating-point stack adjustment imbalance, related to the math/i386/ directory. In some cases, use of this library could introduce out-of-bounds writes that are not present in an application's source code.

A stack-based buffer overflow vulnerability exists in the PDF process_fontname functionality of Accusoft ImageGear 19.9. A specially crafted malformed file can lead to code execution. An attacker can provide a malicious file to trigger this vulnerability.

CODESYS V3 web server, all versions prior to 3.5.14.10, allows an attacker to send specially crafted http or https requests which could cause a stack overflow and create a denial-of-service condition or allow remote code execution.

A user-provided integer option was passed to nmreq_copyin() without checking if it would overflow. This insufficient bounds checking could lead to kernel memory corruption. On systems configured to include netmap in their devfs_ruleset, a privileged process running in a jail can affect the host environment.

A remote execution of arbitrary code vulnerability was discovered in ArubaOS-Switch Devices version(s): ArubaOS-Switch 15.xx.xxxx: All versions; ArubaOS-Switch 16.01.xxxx: All versions; ArubaOS-Switch 16.02.xxxx: K.16.02.0033 and below; ArubaOS-Switch 16.03.xxxx: All versions; ArubaOS-Switch 16.04.xxxx: All versions; ArubaOS-Switch 16.05.xxxx: All versions; ArubaOS-Switch 16.06.xxxx: All versions; ArubaOS-Switch 16.07.xxxx: All versions; ArubaOS-Switch 16.08.xxxx: KB/WB/WC/YA/YB/YC.16.08.0024 and below; ArubaOS-Switch 16.09.xxxx: KB/WB/WC/YA/YB/YC.16.09.0019 and below; ArubaOS-Switch 16.10.xxxx: KB/WB/WC/YA/YB/YC.16.10.0019 and below; ArubaOS-Switch 16.11.xxxx: KB/WB/WC/YA/YB/YC.16.11.0003 and below. Aruba has released upgrades for ArubaOS-Switch Devices that address these security vulnerabilities.

An issue was discovered in Marvell 88W8688 Wi-Fi firmware before version p52, as used on Tesla Model S/X vehicles manufactured before March 2018, via the Parrot Faurecia Automotive FC6050W module. A heap-based buffer overflow allows remote attackers to cause a denial of service or execute arbitrary code via malformed Wi-Fi packets.

Out of bound write can happen due to lack of check of array index value while parsing SDP attribute for SAR in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Wearables in APQ8053, APQ8096AU, Kamorta, MDM9607, MDM9640, MDM9650, MSM8905, MSM8909, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, Nicobar, QCM2150, QCS605, QM215, Rennell, SA415M, SC7180, SC8180X, SDA660, SDA845, SDM429, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX24, SM6150, SM7150, SM8150, SXR1130

An issue was discovered in Squid before 4.9. URN response handling in Squid suffers from a heap-based buffer overflow. When receiving data from a remote server in response to an URN request, Squid fails to ensure that the response can fit within the buffer. This leads to attacker controlled data overflowing in the heap.

There is an Input Verification Vulnerability in Huawei Smartphone. Successful exploitation of this vulnerability may cause out-of-bounds memory write.

A heap-based buffer overflow vulnerability exists in the PSD read_icc_icCurve_data functionality of Accusoft ImageGear 19.9. A specially crafted malformed file can lead to an integer overflow that, in turn, leads to a heap buffer overflow. An attacker can provide a malicious file to trigger this vulnerability.

xrdp is an open source project which provides a graphical login to remote machines using Microsoft Remote Desktop Protocol (RDP). xrdp < v0.9.21 contain a Out of Bound Write in xrdp_mm_trans_process_drdynvc_channel_open() function. There are no known workarounds for this issue. Users are advised to upgrade.

A stack-based buffer overflow vulnerability exists in the confsrv set_port_fwd_rule functionality of TCL LinkHub Mesh Wifi MS1G_00_01.00_14. A specially-crafted network packet can lead to stack-based buffer overflow. An attacker can send a malicious packet to trigger this vulnerability.

Some Xerox printers (such as the Phaser 3320 V53.006.16.000) were affected by one or more stack-based buffer overflow vulnerabilities in the Google Cloud Print implementation that would allow an unauthenticated attacker to execute arbitrary code on the device. This was caused by an insecure handling of the register parameters, because the size used within a memcpy() function, which copied the action value into a local variable, was not checked properly.

Tenda W20E v15.11.0.6 was discovered to contain multiple stack overflows in the function formSetStaticRoute via the parameters staticRouteNet, staticRouteMask, staticRouteGateway, staticRouteWAN.

An issue was discovered in Squid through 4.7. When handling the tag esi:when when ESI is enabled, Squid calls ESIExpression::Evaluate. This function uses a fixed stack buffer to hold the expression while it's being evaluated. When processing the expression, it could either evaluate the top of the stack, or add a new member to the stack. When adding a new member, there is no check to ensure that the stack won't overflow.

BZ2_decompress in decompress.c in bzip2 through 1.0.6 has an out-of-bounds write when there are many selectors.

ZTE MF971R product has two stack-based buffer overflow vulnerabilities. An attacker could exploit the vulnerabilities to execute arbitrary code.

Handlers for *_CFG_PAGE read / write ioctls in the mpr, mps, and mpt drivers allocated a buffer of a caller-specified size, but copied to it a fixed size header. Other heap content would be overwritten if the specified size was too small. Users with access to the mpr, mps or mpt device node may overwrite heap data, potentially resulting in privilege escalation. Note that the device node is only accessible to root and members of the operator group.

My Cloud OS 5 was vulnerable to a pre-authenticated stack overflow vulnerability on the FTP service that could be exploited by unauthenticated attackers on the network. Addressed the vulnerability by adding defenses against stack overflow issues.

Stack-based overflow vulnerability in the logMess function in Open TFTP Server SP 1.66 and earlier allows remote attackers to perform a denial of service or execute arbitrary code via a long TFTP error packet, a different vulnerability than CVE-2018-10387 and CVE-2019-12567.

Command injection and stack-based buffer overflow vulnerabilities in the KillDupUsr_func function of spx_restservice allow an attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

A memory corruption issue was addressed with improved state management. This issue is fixed in macOS Ventura 13, iOS 16. An app may be able to execute arbitrary code with kernel privileges

In ZeroMQ libzmq before 4.0.9, 4.1.x before 4.1.7, and 4.2.x before 4.3.2, a remote, unauthenticated client connecting to a libzmq application, running with a socket listening with CURVE encryption/authentication enabled, may cause a stack overflow and overwrite the stack with arbitrary data, due to a buffer overflow in the library. Users running public servers with the above configuration are highly encouraged to upgrade as soon as possible, as there are no known mitigations.

D-Link DSL-320B-D1 devices through EU_1.25 are prone to multiple Stack-Based Buffer Overflows that allow unauthenticated remote attackers to take over a device via the login.xgi user and pass parameters. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Stack-based overflow vulnerability in the logMess function in Open TFTP Server MT 1.65 and earlier allows remote attackers to perform a denial of service or execute arbitrary code via a long TFTP error packet, a different vulnerability than CVE-2018-10387 and CVE-2019-12568.

TRENDnet TEW755AP 1.13B01 was discovered to contain a stack overflow via the wps_sta_enrollee_pin parameter in the set_sta_enrollee_pin_5g function.

Some Brother printers (such as the HL-L8360CDW v1.20) were affected by a heap buffer overflow vulnerability as the IPP service did not parse attribute names properly. This would allow an attacker to execute arbitrary code on the device.