`silverstripe/graphql` serves Silverstripe data as GraphQL representations. In versions 4.2.2 and 4.1.1, an attacker could use a specially crafted graphql query to execute a denial of service attack against a website which has a publicly exposed graphql endpoint. This mostly affects websites with particularly large/complex graphql schemas. Users should upgrade to `silverstripe/graphql` 4.2.3 or 4.1.2 to remedy the vulnerability.

Any request send to a Netgear Nighthawk Wifi6 Router (RAX30)'s web service containing a “Content-Type” of “multipartboundary=” will result in the request body being written to “/tmp/mulipartFile” on the device itself. A sufficiently large file will cause device resources to be exhausted, resulting in the device becoming unusable until it is rebooted.

IBM Watson CP4D Data Stores 4.6.0 does not properly allocate resources without limits or throttling which could allow a remote attacker with information specific to the system to cause a denial of service. IBM X-Force ID: 248924.

A vulnerability in the cryptographic hardware accelerator driver of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a temporary denial of service (DoS) condition. The vulnerability exists because the affected devices have a limited amount of Direct Memory Access (DMA) memory and the affected software improperly handles resources in low-memory conditions. An attacker could exploit this vulnerability by sending a sustained, high rate of malicious traffic to an affected device to exhaust memory on the device. A successful exploit could allow the attacker to exhaust DMA memory on the affected device, which could cause the device to reload and result in a temporary DoS condition.

Allocation of Resources Without Limits or Throttling in GitHub repository froxlor/froxlor prior to 2.0.16.

IBM MQ 9.2 CD, 9.2 LTS, 9.3 CD, and 9.3 LTS could allow a remote attacker to cause a denial of service due to an error processing invalid data. IBM X-Force ID: 248418.

Knot Resolver before 5.6.0 enables attackers to consume its resources, launching amplification attacks and potentially causing a denial of service. Specifically, a single client query may lead to a hundred TCP connection attempts if a DNS server closes connections without providing a response.

An issue was discovered in hyper v0.13.7. h2-0.2.4 Stream stacking occurs when the H2 component processes HTTP2 RST_STREAM frames. As a result, the memory and CPU usage are high which can lead to a Denial of Service (DoS).

An issue found in DUALSPACE Super Secuirty v.2.3.7 allows an attacker to cause a denial of service via the SharedPreference files.

A memory leak exists in Palo Alto Networks PAN-OS software that enables an attacker to send a burst of crafted packets through the firewall that eventually prevents the firewall from processing traffic. This issue applies only to PA-5400 Series devices that are running PAN-OS software with the SSL Forward Proxy feature enabled.

Werkzeug is a comprehensive WSGI web application library. Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses `request.data`, `request.form`, `request.files`, or `request.get_data(parse_form_data=False)`, it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers. Version 2.2.3 contains a patch for this issue.

Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt denial-of-service attacks against the Password reset page. An attacker could potentially send a large number of emails if they know the email addresses of users in Kiwi TCMS. Additionally that may strain SMTP resources. Users should upgrade to v12.0 or later to receive a patch. As potential workarounds, users may install and configure a rate-limiting proxy in front of Kiwi TCMS and/or configure rate limits on their email server when possible.

Boxo, formerly known as go-libipfs, is a library for building IPFS applications and implementations. In versions 0.4.0 and 0.5.0, if an attacker is able allocate arbitrary many bytes in the Bitswap server, those allocations are lasting even if the connection is closed. This affects users accepting untrusted connections with the Bitswap server and also affects users using the old API stubs at `github.com/ipfs/go-libipfs/bitswap` because users then transitively import `github.com/ipfs/go-libipfs/bitswap/server`. Boxo versions 0.6.0 and 0.4.1 contain a patch for this issue. As a workaround, those who are using the stub object at `github.com/ipfs/go-libipfs/bitswap` not taking advantage of the features provided by the server can refactor their code to use the new split API that will allow them to run in a client only mode: `github.com/ipfs/go-libipfs/bitswap/client`.

Apache Commons FileUpload before 1.5 does not limit the number of request parts to be processed resulting in the possibility of an attacker triggering a DoS with a malicious upload or series of uploads. Note that, like all of the file upload limits, the new configuration option (FileUploadBase#setFileCountMax) is not enabled by default and must be explicitly configured.

Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt brute-force attacks against the login page. Users should upgrade to v12.0 or later to receive a patch. As a workaround, users may install and configure a rate-limiting proxy in front of Kiwi TCMS.

Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. In versions 7.0.10 and below and 8.0.0-beta1 through 8.0.0-rc1, mishandling of data on HTTP2 stream 0 can lead to uncontrolled memory usage, leading to loss of visibility. Workarounds include disabling the HTTP/2 parser, and using a signature like drop http2 any any -> any any (frame:http2.hdr; byte_test:1,=,0,3; byte_test:4,=,0,5; sid: 1;) where the first byte test tests the HTTP2 frame type DATA and the second tests the stream id 0. This is fixed in versions 7.0.11 and 8.0.0.

@fastify/multipart is a Fastify plugin to parse the multipart content-type. Prior to versions 7.4.1 and 6.0.1, @fastify/multipart may experience denial of service due to a number of situations in which an unlimited number of parts are accepted. This includes the multipart body parser accepting an unlimited number of file parts, the multipart body parser accepting an unlimited number of field parts, and the multipart body parser accepting an unlimited number of empty parts as field parts. This is fixed in v7.4.1 (for Fastify v4.x) and v6.0.1 (for Fastify v3.x). There are no known workarounds.

When a BIG-IP APM Access Policy is configured on a virtual server, undisclosed traffic can cause TMM to terminate.   Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

notation-go is a collection of libraries for supporting Notation sign, verify, push, and pull of oci artifacts. Prior to version 1.0.0-rc.3, notation-go users will find their application using excessive memory when verifying signatures. The application will be killed, and thus availability is impacted. The problem has been patched in the release v1.0.0-rc.3. Some workarounds are available. Users can review their own trust policy file and check if the identity string contains `=#`. Meanwhile, users should only put trusted certificates in their trust stores referenced by their own trust policy files, and make sure the `authenticity` validation is set to `enforce`.

hb-ot-layout-gsubgpos.hh in HarfBuzz through 6.0.0 allows attackers to trigger O(n^2) growth via consecutive marks during the process of looking back for base glyphs when attaching marks.

Chall-Manager is a platform-agnostic system able to start Challenges on Demand of a player. The HTTP Gateway processes headers, but with no timeout set. With a slow loris attack, an attacker could cause Denial of Service (DoS). Exploitation does not require authentication nor authorization, so anyone can exploit it. It should nonetheless not be exploitable as it is highly recommended to bury Chall-Manager deep within the infrastructure due to its large capabilities, so no users could reach the system. Patch has been implemented by commit 1385bd8 and shipped in v0.1.4.

In Django 3.2 before 3.2.17, 4.0 before 4.0.9, and 4.1 before 4.1.6, the parsed values of Accept-Language headers are cached in order to avoid repetitive parsing. This leads to a potential denial-of-service vector via excessive memory usage if the raw value of Accept-Language headers is very large.

cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. Prior to 0.23.0, incoming requests using Transfer-Encoding: chunked in the header can allocate memory arbitrarily in the server, potentially leading to its exhaustion. This vulnerability is fixed in 0.23.0. NOTE: This vulnerability is related to CVE-2025-53628.

WeGIA is a web manager for charitable institutions. The Wegia server has a vulnerability that allows excessively long HTTP GET requests to a specific URL. This issue arises from the lack of validation for the length of the errorstr parameter. Tests confirmed that the server processes URLs up to 8,142 characters, resulting in high resource consumption, elevated latency, timeouts, and read errors. This makes the server susceptible to Denial of Service (DoS) attacks. This vulnerability is fixed in 3.3.0.

HashiCorp Nomad and Nonad Enterprise up to 0.10.2 HTTP/RPC services allowed unbounded resource usage, and were susceptible to unauthenticated denial of service. Fixed in 0.10.3.

HashiCorp Consul and Consul Enterprise up to 1.6.2 HTTP/RPC services allowed unbounded resource usage, and were susceptible to unauthenticated denial of service. Fixed in 1.6.3.

WeGIA is a web manager for charitable institutions. The Wegia server has a vulnerability that allows excessively long HTTP GET requests to a specific URL. This issue arises from the lack of validation for the length of the fid parameter. Tests confirmed that the server processes URLs up to 8,142 characters, resulting in high resource consumption, elevated latency, timeouts, and read errors. This makes the server susceptible to Denial of Service (DoS) attacks. This vulnerability is fixed in 3.3.0.

A vulnerability in the SIP processing subsystem of Cisco BroadWorks could allow an unauthenticated, remote attacker to halt the processing of incoming SIP requests, resulting in a denial of service (DoS) condition. This vulnerability is due to improper memory handling for certain SIP requests. An attacker could exploit this vulnerability by sending a high number of SIP requests to an affected system. A successful exploit could allow the attacker to exhaust the memory that was allocated to the Cisco BroadWorks Network Servers that handle SIP traffic. If no memory is available, the Network Servers can no longer process incoming requests, resulting in a DoS condition that requires manual intervention to recover.

Wasmtime is a runtime for WebAssembly. Prior to versions 24.0.6, 36.0.6, 4.0.04, 41.0.4, and 42.0.0, Wasmtime's implementation of the `wasi:http/types.fields` resource is susceptible to panics when too many fields are added to the set of headers. Wasmtime's implementation in the `wasmtime-wasi-http` crate is backed by a data structure which panics when it reaches excessive capacity and this condition was not handled gracefully in Wasmtime. Panicking in a WASI implementation is a Denial of Service vector for embedders and is treated as a security vulnerability in Wasmtime. Wasmtime 24.0.6, 36.0.6, 40.0.4, 41.0.4, and 42.0.0 patch this vulnerability and return a trap to the guest instead of panicking. There are no known workarounds at this time. Embedders are encouraged to update to a patched version of Wasmtime.

Bitcoin Core before 0.15.0 allows a denial of service (OOM kill of a daemon process) via a flood of minimum difficulty headers.

An Allocation of Resources Without Limits or Throttling vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). On QFX10K Series, Inter-Chassis Control Protocol (ICCP) is used in MC-LAG topologies to exchange control information between the devices in the topology. ICCP connection flaps and sync issues will be observed due to excessive specific traffic to the local device. This issue affects Juniper Networks Junos OS on QFX10K Series: * All versions prior to 20.2R3-S7; * 20.4 versions prior to 20.4R3-S4; * 21.1 versions prior to 21.1R3-S3; * 21.2 versions prior to 21.2R3-S1; * 21.3 versions prior to 21.3R3; * 21.4 versions prior to 21.4R3; * 22.1 versions prior to 22.1R2.

USB HID protocol dissector memory exhaustion in Wireshark 4.6.0 to 4.6.3 and 4.4.0 to 4.4.13 allows denial of service

In Bitcoin Core before 0.18.0, a node could be stalled for hours when processing the orphans of a crafted unconfirmed transaction.

Litestar is an Asynchronous Server Gateway Interface (ASGI) framework. Prior to version 2.13.0, the multipart form parser shipped with litestar expects the entire request body as a single byte string and there is no default limit for the total size of the request body. This allows an attacker to upload arbitrary large files wrapped in a `multipart/form-data` request and cause excessive memory consumption on the server. The multipart form parser in affected versions is vulnerable to this type of attack by design. The public method signature as well as its implementation both expect the entire request body to be available as a single byte string. It is not possible to accept large file uploads in a safe way using this parser. This may be a regression, as a variation of this issue was already reported in CVE-2023-25578. Limiting the part number is not sufficient to prevent out-of-memory errors on the server. A patch is available in version 2.13.0.

In BIP-IP versions 17.0.x before 17.0.0.2, 16.1.x before 16.1.3.3, 15.1.x before 15.1.8.1, 14.1.x before 14.1.5.3, and all versions of 13.1.x, when OCSP authentication profile is configured on a virtual server, undisclosed requests can cause an increase in CPU resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

ntpd-rs is a full-featured implementation of the Network Time Protocol. Prior to 1.7.1, an attacker can remotely induce moderate increases (2-4 times above normal) in cpu usage. When having NTS enabled on an ntpd-rs server, an attacker can create malformed NTS packets that take significantly more effort for the server to respond to by requesting a large number of cookies. This can lead to degraded server performance even when a server could otherwise handle the load. This vulnerability is fixed in 1.7.1.

In doInBackground of NotificationContentInflater.java, there is a possible temporary denial or service due to long running operations. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12 Android-12L Android-13Android ID: A-252766417

An issue in Technitium DNS Server v.13.5 allows a remote attacker to cause a denial of service via the rate-limiting component

An issue in how XINJE XD5E-24R and XL5E-16T v3.5.3b handles TCP protocol messages allows attackers to cause a Denial of Service (DoS) via a crafted TCP message.

A vulnerability in the XCP Authentication Service of the Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P) could allow an unauthenticated, remote attacker to cause a temporary service outage for all Cisco Unified CM IM&P users who are attempting to authenticate to the service, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted login message to the affected device. A successful exploit could allow the attacker to cause an unexpected restart of the authentication service, preventing new users from successfully authenticating. Exploitation of this vulnerability does not impact Cisco Unified CM IM&P users who were authenticated prior to an attack.

A vulnerability in a logging API in Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to cause the device to become unresponsive or trigger an unexpected reload. This vulnerability could also allow an attacker with valid user credentials, but not Administrator privileges, to view a system log file that they would not normally have access to. This vulnerability is due to a lack of rate-limiting of requests that are sent to a specific API that is related to an FMC log. An attacker could exploit this vulnerability by sending a high rate of HTTP requests to the API. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to the FMC CPU spiking to 100 percent utilization or to the device reloading. CPU utilization would return to normal if the attack traffic was stopped before an unexpected reload was triggered.

A buffer-management vulnerability in OPC Foundation OPCFoundation.NetStandard.Opc.Ua.Core before 1.05.374.54 could allow remote attackers to exhaust memory resources. It is triggered when the system receives an excessive number of messages from a remote source. This could potentially lead to a denial of service (DoS) condition, disrupting the normal operation of the system.

An issue in Open Networking Foundations sdran-in-a-box v.1.4.3 and onos-a1t v.0.2.3 allows a remote attacker to cause a denial of service via the onos-a1t component of the sdran-in-a-box, specifically the DeleteWatcher function.

The O-RAN E2T I-Release Prometheus metric Increment function can crash in sctpThread.cpp for message.peerInfo->sctpParams->e2tCounters[IN_SUCC][MSG_COUNTER][ProcedureCode_id_RICsubscription]->Increment().

A denial of service issue was discovered in GitLab CE/EE affecting all versions starting from 13.2.4 before 15.10.8, all versions starting from 15.11 before 15.11.7, all versions starting from 16.0 before 16.0.2 which allows an attacker to cause high resource consumption using malicious test report artifacts.

async-graphql is a GraphQL server library implemented in Rust. async-graphql before 7.0.10 does not limit the number of directives for a field. This can lead to Service Disruption, Resource Exhaustion, and User Experience Degradation. This vulnerability is fixed in 7.0.10.

An issue in the Instructor Appointment Availability module of eSoft Planner 3.24.08271-USA allows attackers to cause a Denial of Service (DoS) via a crafted POST request.

An issue has been discovered in GitLab CE/EE affecting all versions from 8.14 before 18.0.6, 18.1 before 18.1.4, and 18.2 before 18.2.2 that could have allowed an unauthenticated user to create a denial of service condition by sending specially crafted payloads to specific integration API endpoints.

Fetch FTP Client 5.8.2 contains a denial of service vulnerability that allows attackers to trigger 100% CPU consumption by sending long server responses. Attackers can send specially crafted FTP server responses exceeding 2K bytes to cause excessive resource utilization and potentially crash the application.

SOUND4 IMPACT/FIRST/PULSE/Eco versions 2.x contains a network vulnerability that allows unauthenticated attackers to send ICMP signals to arbitrary hosts through network command scripts. Attackers can abuse ping.php, traceroute.php, and dns.php to generate network flooding attacks targeting external hosts.