A vulnerability, which was classified as problematic, was found in TOTOLINK A3700R 9.1.2u.5822_B20200513. Affected is an unknown function of the file /wizard.html of the component Password Reset Handler. The manipulation leads to improper access controls. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-272568. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been identified in SENTRON 7KT PAC1260 Data Manager (All versions). The web interface of affected devices provides an endpoint that allows to enable the ssh service without authentication. This could allow an unauthenticated remote attacker to enable remote access to the device via ssh.

On all 7.x and 6.x versions (fixed in 8.0.0), BIG-IQ high availability (HA) when using a Quorum device for automatic failover does not implement any form of authentication with the Corosync daemon. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.

Asus RT-N12E 2.0.0.39 is affected by an incorrect access control vulnerability. Through system.asp / start_apply.htm, an attacker can change the administrator password without any authentication.

Functions/EWD_UFAQ_Import.php in the ultimate-faqs plugin through 1.8.24 for WordPress allows unauthenticated options import.

Lack of authentication in the network relays used in MEGVII Koala 2.9.1-c3s allows attackers to grant physical access to anyone by sending packet data to UDP port 5000.

Zyxel CloudCNM SecuManager 3.1.0 and 3.1.1 has no authentication for /registerCpe requests.

Lack of authentication vulnerability. An unauthenticated local user is able to see through the cameras using the web server due to the lack of any form of authentication.

Zoho ManageEngine ServiceDesk Plus before 11.1 build 11115 allows remote unauthenticated attackers to change the installation status of deployed agents.

IBM Guardium Data Encryption (GDE) 3.0.0.2 and 4.0.0.4 does not perform any authentication for functionality that requires a provable user identity or consumes a significant amount of resources.

Missing authentication for critical function in SolarView Compact SV-CPT-MC310 prior to Ver.6.5 allows an attacker to alter the setting information without the access privileges via unspecified vectors.

On SOYAL AR-727H and AR-829Ev5 devices, all CGI programs allow unauthenticated POST access.

RouterOS versions 6.45.6 Stable, 6.44.5 Long-term, and below allow remote unauthenticated attackers to trigger DNS queries via port 8291. The queries are sent from the router to a server of the attacker's choice. The DNS responses are cached by the router, potentially resulting in cache poisoning

An issue was discovered on D-Link DSL-2640B E1 EU_1.01 devices. The administrative interface doesn't perform authentication checks for a firmware-update POST request. Any attacker that can access the administrative interface can install firmware of their choice.

A Broken Access Control vulnerability in the D-Link DSL-2680 web administration interface (Firmware EU_1.03) allows an attacker to change DNS servers without being authenticated on the admin interface by submitting a crafted Forms/dns_1 POST request.

Intelbras WRN240 devices do not require authentication to replace the firmware via a POST request to the incoming/Firmware.cfg URI.

A Broken Access Control vulnerability in the D-Link DSL-2680 web administration interface (Firmware EU_1.03) allows an attacker to download the configuration (binary file) settings by submitting a rom-0 GET request without being authenticated on the admin interface.

A Broken Access Control vulnerability in the D-Link DSL-2680 web administration interface (Firmware EU_1.03) allows an attacker to enable or disable MAC address filtering by submitting a crafted Forms/WlanMacFilter_1 POST request without being authenticated on the admin interface.

On Signify Philips Taolight Smart Wi-Fi Wiz Connected LED Bulb 9290022656 devices, an unprotected API lets remote users control the bulb's operation. Anyone can turn the bulb on or off, or change its color or brightness remotely. There is no authentication or encryption to use the control API. The only requirement is that the attacker have network access to the bulb.

includes/class-coming-soon-creator.php in the igniteup plugin through 3.4 for WordPress allows unauthenticated arbitrary file deletion.

The udpServerSys service in Petwant PF-103 firmware 4.22.2.42 and Petalk AI 3.2.2.30 allows remote attackers to initiate firmware upgrades and alter device settings.

Missing authentication in the SetStudentNotes method in IDAttend’s IDWeb application 3.1.052 and earlier allows modification of student data by unauthenticated attackers.

Signal K Server is a server application that runs on a central hub in a boat. Prior to version 2.24.0-beta.1, the SignalK Server exposes an unauthenticated HTTP endpoint that allows remote attackers to modify navigation data source priorities. This endpoint, accessible via PUT /signalk/v1/api/sourcePriorities, does not enforce authentication or authorization checks and directly assigns user-controlled input to the server configuration. As a result, attackers can influence which GPS, AIS, or other sensor data sources are trusted by the system. The changes are immediately applied and persisted to disk, allowing the manipulation to survive server restarts. This issue has been patched in version 2.24.0-beta.1.

Apollo is a configuration management system. Prior to version 2.1.0, there are potential security issues if users expose apollo-configservice to the internet, which is not recommended. This is because there is no authentication feature enabled for the built-in eureka service. Malicious hackers may access eureka directly to mock apollo-configservice and apollo-adminservice. Login authentication for eureka was added in version 2.1.0. As a workaround, avoid exposing apollo-configservice to the internet.

MaxKB is an open-source AI assistant for enterprise. Prior to 2.9.0, MaxKB's webhook trigger endpoint (/api/trigger/v1/webhook/{trigger_id}) is accessible without authentication. The WebhookAuth class unconditionally returns (None, {}), which Django REST Framework interprets as successful authentication. Combined with optional per-trigger token verification and no backend enforcement of token requirements, any unauthenticated attacker who knows a valid trigger ID can invoke webhook triggers to execute their bound tasks. This vulnerability is fixed in 2.9.0.

The Angeet ES3 KVM allows a remote, unauthenticated attacker to write arbitrary files, including configuration files or system binaries. Modified configuration files or system binaries could allow an attacker to take complete control of a vulnerable system.

Missing Authentication for Critical Function vulnerability in Mitsubishi Electric Corporation EZSocket versions 3.0 to 5.92, GT Designer3 Version1(GOT1000) versions 1.325P and prior, GT Designer3 Version1(GOT2000) versions 1.320J and prior, GX Works2 versions 1.11M to 1.626C, GX Works3 versions 1.106L and prior, MELSOFT Navigator versions 1.04E to 2.102G, MT Works2 versions 1.190Y and prior, MX Component versions 4.00A to 5.007H and MX OPC Server DA/UA all versions allows a remote unauthenticated attacker to bypass authentication by sending specially crafted packets and connect to the products illegally.

Anviz CX2 Lite and CX7 are vulnerable to unauthenticated POST requests that modify debug settings (e.g., enabling SSH), allowing unauthorized state changes that can facilitate later compromise.

An issue was discovered in the femanager extension before 5.5.3, 6.x before 6.3.4, and 7.x before 7.1.0 for TYPO3. Missing access checks in the InvitationController allow an unauthenticated user to set the password of all frontend users.

A CWE-306 "Missing Authentication for Critical Function" in maxprofile/setup/routes.lua in Q-Free MaxTime less than or equal to version 2.11.0 allows an unauthenticated remote attacker to disable front panel authentication via crafted HTTP requests.

An issue was discovered in the femanager extension before 5.5.3, 6.x before 6.3.4, and 7.x before 7.1.0 for TYPO3. Missing access checks in the InvitationController allow an unauthenticated user to delete all frontend users.

A security vulnerability exists in the Zingbox Inspector versions 1.280 and earlier, where authentication is not required when binding the Inspector instance to a different customer tenant.

Rittal Chiller SK 3232-Series web interface as built upon Carel pCOWeb firmware A1.5.3 – B1.2.4. The authentication mechanism on affected systems does not provide a sufficient level of protection against unauthorized configuration changes. Primary operations, namely turning the cooling unit on and off and setting the temperature set point, can be modified without authentication.

Vulnerability in the Oracle iSetup product of Oracle E-Business Suite (component: General Ledger Update Transform, Reports). Supported versions that are affected are 12.2.3-12.2.12. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle iSetup. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle iSetup accessible data. CVSS 3.1 Base Score 7.5 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N).

Missing Authentication for Critical Function vulnerability in Microchip TimePictra allows Configuration/Environment Manipulation.This issue affects TimePictra: from 11.0 through 11.3 SP2.

The devices allow access to an unprotected endpoint that allows MPFS file system binary image upload without authentication. The MPFS2 file system module provides a light-weight read-only file system that can be stored in external EEPROM, external serial flash, or internal flash program memory. This file system serves as the basis for the HTTP2 web server module, but is also used by the SNMP module and is available to other applications that require basic read-only storage capabilities. This can be exploited to overwrite the flash program memory that holds the web server's main interfaces and execute arbitrary code.

Parse Dashboard is a standalone dashboard for managing Parse Server apps. In versions 7.3.0-alpha.42 through 9.0.0-alpha.7, the AI Agent API endpoint (POST `/apps/:appId/agent`) has multiple security vulnerabilities that, when chained, allow unauthenticated remote attackers to perform arbitrary read and write operations against any connected Parse Server database using the master key. The agent feature is opt-in; dashboards without an agent config are not affected. The fix in version 9.0.0-alpha.8 adds authentication, CSRF validation, and per-app authorization middleware to the agent endpoint. Read-only users are restricted to the `readOnlyMasterKey` with write permissions stripped server-side. A cache key collision between master key and read-only master key was also corrected. As a workaround, remove or comment out the agent configuration block from your Parse Dashboard configuration.

Vulnerability of lax app identity verification in the pre-authorization function.Successful exploitation of this vulnerability will cause malicious apps to become pre-authorized.

Vulnerability of lax app identity verification in the pre-authorization function.Successful exploitation of this vulnerability will cause malicious apps to become pre-authorized.

A CWE-306 "Missing Authentication for Critical Function" in maxprofile/setup/routes.lua in Q-Free MaxTime less than or equal to version 2.11.0 allows an unauthenticated remote attacker to set an arbitrary authentication profile server via crafted HTTP requests.

In WhatsUp Gold versions released before 2024.0.2, an unauthenticated attacker can configure LDAP settings.

An authentication bypass vulnerability has been found in Repox, which allows a remote user to send a specially crafted POST request, due to the lack of any authentication method, resulting in the alteration or creation of users.

VDSM and libvirt in Red Hat Enterprise Virtualization Hypervisor (aka RHEV-H) 7-7.x before 7-7.2-20151119.0 and 6-6.x before 6-6.7-20151117.0 as packaged in Red Hat Enterprise Virtualization before 3.5.6 when VSDM is run with -spice disable-ticketing and a VM is suspended and then restored, allows remote attackers to log in without authentication via unspecified vectors.

OpenClaw is a personal AI assistant. Versions 2026.2.13 and below allow the optional @openclaw/voice-call plugin Telnyx webhook handler to accept unsigned inbound webhook requests when telnyx.publicKey is not configured, enabling unauthenticated callers to forge Telnyx events. Telnyx webhooks are expected to be authenticated via Ed25519 signature verification. In affected versions, TelnyxProvider.verifyWebhook() could effectively fail open when no Telnyx public key was configured, allowing arbitrary HTTP POST requests to the voice-call webhook endpoint to be treated as legitimate Telnyx events. This only impacts deployments where the Voice Call plugin is installed, enabled, and the webhook endpoint is reachable from the attacker (for example, publicly exposed via a tunnel/proxy). The issue has been fixed in version 2026.2.14.

TOTOLINK X6000R V9.4.0cu.852_B20230719 is vulnerable to Incorrect Access Control.Attackers can reset login password & WIFI passwords without authentication.

Eibiz i-Media Server Digital Signage 3.8.0 contains an authentication bypass vulnerability that allows unauthenticated attackers to create admin users through AMF-encoded object manipulation. Attackers can send crafted serialized objects to the /messagebroker/amf endpoint to create administrative users without authentication, bypassing security controls.

IBM Sterling Partner Engagement Manager 6.1.2, 6.2.0, and 6.2.2 could allow a remote user to perform unauthorized actions due to improper authentication. IBM X-Force ID: 266896.

search-exclude.php in the "Search Exclude" plugin before 1.2.4 for WordPress allows unauthenticated options changes.

ClickStudios Passwordstate Password Reset Portal prior to build 8501 is affected by an authentication bypass vulnerability. The ResetPassword function does not validate whether the user has successfully authenticated using security questions. An unauthenticated, remote attacker can send a crafted HTTP request to the /account/ResetPassword page to set a new password for any registered user.

The web interface on the RIGOL MSO5000 digital oscilloscope with firmware 00.01.03.00.03 allows remote attackers to change the admin password via a zero-length pass0 to the webcontrol changepwd.cgi application, i.e., the entered password only needs to match the first zero characters of the saved password.