A flaw was found in the JFS filesystem code in the Linux Kernel which allows a local attacker with the ability to set extended attributes to panic the system, causing memory corruption or escalating privileges. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability.

Heap buffer overflow in Skia in Google Chrome prior to 146.0.7680.71 allowed a remote attacker to perform out of bounds memory access via a crafted HTML page. (Chromium security severity: Medium)

An out-of-bounds(OOB) memory access vulnerability was found in vmwgfx driver in drivers/gpu/vmxgfx/vmxgfx_kms.c in GPU component in the Linux kernel with device file '/dev/dri/renderD128 (or Dxxx)'. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS).

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid mapping wrong physical block for swapfile Xiaolong Guo reported a f2fs bug in bugzilla [1] [1] https://bugzilla.kernel.org/show_bug.cgi?id=220951 Quoted: "When using stress-ng's swap stress test on F2FS filesystem with kernel 6.6+, the system experiences data corruption leading to either: 1 dm-verity corruption errors and device reboot 2 F2FS node corruption errors and boot hangs The issue occurs specifically when: 1 Using F2FS filesystem (ext4 is unaffected) 2 Swapfile size is less than F2FS section size (2MB) 3 Swapfile has fragmented physical layout (multiple non-contiguous extents) 4 Kernel version is 6.6+ (6.1 is unaffected) The root cause is in check_swap_activate() function in fs/f2fs/data.c. When the first extent of a small swapfile (< 2MB) is not aligned to section boundaries, the function incorrectly treats it as the last extent, failing to map subsequent extents. This results in incorrect swap_extent creation where only the first extent is mapped, causing subsequent swap writes to overwrite wrong physical locations (other files' data). Steps to Reproduce 1 Setup a device with F2FS-formatted userdata partition 2 Compile stress-ng from https://github.com/ColinIanKing/stress-ng 3 Run swap stress test: (Android devices) adb shell "cd /data/stressng; ./stress-ng-64 --metrics-brief --timeout 60 --swap 0" Log: 1 Ftrace shows in kernel 6.6, only first extent is mapped during second f2fs_map_blocks call in check_swap_activate(): stress-ng-swap-8990: f2fs_map_blocks: ino=11002, file offset=0, start blkaddr=0x43143, len=0x1 (Only 4KB mapped, not the full swapfile) 2 in kernel 6.1, both extents are correctly mapped: stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=0, start blkaddr=0x13cd4, len=0x1 stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=1, start blkaddr=0x60c84b, len=0xff The problematic code is in check_swap_activate(): if ((pblock - SM_I(sbi)->main_blkaddr) % blks_per_sec || nr_pblocks % blks_per_sec || !f2fs_valid_pinned_area(sbi, pblock)) { bool last_extent = false; not_aligned++; nr_pblocks = roundup(nr_pblocks, blks_per_sec); if (cur_lblock + nr_pblocks > sis->max) nr_pblocks -= blks_per_sec; /* this extent is last one */ if (!nr_pblocks) { nr_pblocks = last_lblock - cur_lblock; last_extent = true; } ret = f2fs_migrate_blocks(inode, cur_lblock, nr_pblocks); if (ret) { if (ret == -ENOENT) ret = -EINVAL; goto out; } if (!last_extent) goto retry; } When the first extent is unaligned and roundup(nr_pblocks, blks_per_sec) exceeds sis->max, we subtract blks_per_sec resulting in nr_pblocks = 0. The code then incorrectly assumes this is the last extent, sets nr_pblocks = last_lblock - cur_lblock (entire swapfile), and performs migration. After migration, it doesn't retry mapping, so subsequent extents are never processed. " In order to fix this issue, we need to lookup block mapping info after we migrate all blocks in the tail of swapfile.

In the Linux kernel, the following vulnerability has been resolved: rust_binder: correctly handle FDA objects of length zero Fix a bug where an empty FDA (fd array) object with 0 fds would cause an out-of-bounds error. The previous implementation used `skip == 0` to mean "this is a pointer fixup", but 0 is also the correct skip length for an empty FDA. If the FDA is at the end of the buffer, then this results in an attempt to write 8-bytes out of bounds. This is caught and results in an EINVAL error being returned to userspace. The pattern of using `skip == 0` as a special value originates from the C-implementation of Binder. As part of fixing this bug, this pattern is replaced with a Rust enum. I considered the alternate option of not pushing a fixup when the length is zero, but I think it's cleaner to just get rid of the zero-is-special stuff. The root cause of this bug was diagnosed by Gemini CLI on first try. I used the following prompt: > There appears to be a bug in @drivers/android/binder/thread.rs where > the Fixups oob bug is triggered with 316 304 316 324. This implies > that we somehow ended up with a fixup where buffer A has a pointer to > buffer B, but the pointer is located at an index in buffer A that is > out of bounds. Please investigate the code to find the bug. You may > compare with @drivers/android/binder.c that implements this correctly.

Out of bounds read and write in Tint in Google Chrome on Mac prior to 145.0.7632.116 allowed a remote attacker to perform out of bounds memory access via a crafted HTML page. (Chromium security severity: High)

An elevation of privilege vulnerability in the Qualcomm Wi-Fi driver could enable a local malicious application to execute arbitrary code within the context of the kernel. This issue is rated as High because it first requires compromising a privileged process. Product: Android. Versions: Kernel-3.10. Android ID: A-33979145. References: QC-CR#1105085.

In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: Fix memory corruption due to not set vif driver data size The struct ieee80211_vif contains trailing space for vif driver data, when struct ieee80211_vif is allocated, the total memory size that is allocated is sizeof(struct ieee80211_vif) + size of vif driver data. The size of vif driver data is set by each WiFi driver as needed. The RSI911x driver does not set vif driver data size, no trailing space for vif driver data is therefore allocated past struct ieee80211_vif . The RSI911x driver does however use the vif driver data to store its vif driver data structure "struct vif_priv". An access to vif->drv_priv leads to access out of struct ieee80211_vif bounds and corruption of some memory. In case of the failure observed locally, rsi_mac80211_add_interface() would write struct vif_priv *vif_info = (struct vif_priv *)vif->drv_priv; vif_info->vap_id = vap_idx. This write corrupts struct fq_tin member struct list_head new_flows . The flow = list_first_entry(head, struct fq_flow, flowchain); in fq_tin_reset() then reports non-NULL bogus address, which when accessed causes a crash. The trigger is very simple, boot the machine with init=/bin/sh , mount devtmpfs, sysfs, procfs, and then do "ip link set wlan0 up", "sleep 1", "ip link set wlan0 down" and the crash occurs. Fix this by setting the correct size of vif driver data, which is the size of "struct vif_priv", so that memory is allocated and the driver can store its driver data in it, instead of corrupting memory around it.

Heap buffer overflow in WebCodecs in Google Chrome prior to 145.0.7632.159 allowed a remote attacker to perform an out of bounds memory write via a crafted HTML page. (Chromium security severity: High)

Out of bounds write in Skia in Google Chrome prior to 146.0.7680.75 allowed a remote attacker to perform out of bounds memory access via a crafted HTML page. (Chromium security severity: High)

Out of bounds memory access in WebML in Google Chrome prior to 146.0.7680.71 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

Object lifecycle issue in PowerVR in Google Chrome on Android prior to 145.0.7632.159 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Critical)

NVIDIA CUDA Toolkit SDK contains a stack-based buffer overflow vulnerability in cuobjdump, where an unprivileged remote attacker could exploit this buffer overflow condition by persuading a local user to download a specially crafted corrupted file and execute cuobjdump against it locally, which may lead to a limited denial of service and some loss of data integrity for the local user.

Adobe Flash Player before 18.0.0.375 and 19.x through 23.x before 23.0.0.162 on Windows and OS X and before 11.2.202.635 on Linux allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2016-4274, CVE-2016-4275, CVE-2016-4276, CVE-2016-4280, CVE-2016-4281, CVE-2016-4282, CVE-2016-4283, CVE-2016-4284, CVE-2016-4285, and CVE-2016-6924.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: validate rec->used in journal-replay file record check check_file_record() validates rec->total against the record size but never validates rec->used. The do_action() journal-replay handlers read rec->used from disk and use it to compute memmove lengths: DeleteAttribute: memmove(attr, ..., used - asize - roff) CreateAttribute: memmove(..., attr, used - roff) change_attr_size: memmove(..., used - PtrOffset(rec, next)) When rec->used is smaller than the offset of a validated attribute, or larger than the record size, these subtractions can underflow allowing us to copy huge amounts of memory in to a 4kb buffer, generally considered a bad idea overall. This requires a corrupted filesystem, which isn't a threat model the kernel really needs to worry about, but checking for such an obvious out-of-bounds value is good to keep things robust, especially on journal replay Fix this up by bounding rec->used correctly. This is much like commit b2bc7c44ed17 ("fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot") which checked different values in this same switch statement.

Adobe Flash Player before 18.0.0.366 and 19.x through 22.x before 22.0.0.209 on Windows and OS X and before 11.2.202.632 on Linux allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2016-4175, CVE-2016-4179, CVE-2016-4180, CVE-2016-4181, CVE-2016-4182, CVE-2016-4183, CVE-2016-4184, CVE-2016-4185, CVE-2016-4186, CVE-2016-4187, CVE-2016-4188, CVE-2016-4189, CVE-2016-4190, CVE-2016-4217, CVE-2016-4218, CVE-2016-4219, CVE-2016-4220, CVE-2016-4221, CVE-2016-4233, CVE-2016-4234, CVE-2016-4235, CVE-2016-4236, CVE-2016-4237, CVE-2016-4238, CVE-2016-4239, CVE-2016-4240, CVE-2016-4241, CVE-2016-4242, CVE-2016-4243, CVE-2016-4244, CVE-2016-4245, and CVE-2016-4246.

Adobe Flash Player before 18.0.0.375 and 19.x through 23.x before 23.0.0.162 on Windows and OS X and before 11.2.202.635 on Linux allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2016-4274, CVE-2016-4275, CVE-2016-4276, CVE-2016-4280, CVE-2016-4281, CVE-2016-4282, CVE-2016-4283, CVE-2016-4284, CVE-2016-6922, and CVE-2016-6924.

Adobe Flash Player before 18.0.0.366 and 19.x through 22.x before 22.0.0.209 on Windows and OS X and before 11.2.202.632 on Linux allows attackers to execute arbitrary code or cause a denial of service (stack memory corruption) via unspecified vectors, a different vulnerability than CVE-2016-4176.

V8 in Google Chrome prior to 54.0.2840.90 for Linux, and 54.0.2840.85 for Android, and 54.0.2840.87 for Windows and Mac included incorrect optimisation assumptions, which allowed a remote attacker to perform arbitrary read/write operations, leading to code execution, via a crafted HTML page.

Adobe Flash Player before 18.0.0.366 and 19.x through 22.x before 22.0.0.209 on Windows and OS X and before 11.2.202.632 on Linux allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2016-4172, CVE-2016-4175, CVE-2016-4179, CVE-2016-4180, CVE-2016-4181, CVE-2016-4182, CVE-2016-4183, CVE-2016-4185, CVE-2016-4186, CVE-2016-4187, CVE-2016-4188, CVE-2016-4189, CVE-2016-4190, CVE-2016-4217, CVE-2016-4218, CVE-2016-4219, CVE-2016-4220, CVE-2016-4221, CVE-2016-4233, CVE-2016-4234, CVE-2016-4235, CVE-2016-4236, CVE-2016-4237, CVE-2016-4238, CVE-2016-4239, CVE-2016-4240, CVE-2016-4241, CVE-2016-4242, CVE-2016-4243, CVE-2016-4244, CVE-2016-4245, and CVE-2016-4246.

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp: Don't attempt to copy ID to userspace if PSP command failed When retrieving the ID for the CPU, don't attempt to copy the ID blob to userspace if the firmware command failed. If the failure was due to an invalid length, i.e. the userspace buffer+length was too small, copying the number of bytes _firmware_ requires will overflow the kernel-allocated buffer and leak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 64 at addr ffff8881867f5960 by task syz.0.906/24388 CPU: 130 UID: 0 PID: 24388 Comm: syz.0.906 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025 Call Trace: <TASK> dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120 print_address_description ../mm/kasan/report.c:378 [inline] print_report+0xbc/0x260 ../mm/kasan/report.c:482 kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595 check_region_inline ../mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200 instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 copy_to_user ../include/linux/uaccess.h:236 [inline] sev_ioctl_do_get_id2+0x361/0x490 ../drivers/crypto/ccp/sev-dev.c:2222 sev_ioctl+0x25f/0x490 ../drivers/crypto/ccp/sev-dev.c:2575 vfs_ioctl ../fs/ioctl.c:51 [inline] __do_sys_ioctl ../fs/ioctl.c:597 [inline] __se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> WARN if the driver says the command succeeded, but the firmware error code says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any firwmware error.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds write in smb2_get_ea() EA alignment smb2_get_ea() applies 4-byte alignment padding via memset() after writing each EA entry. The bounds check on buf_free_len is performed before the value memcpy, but the alignment memset fires unconditionally afterward with no check on remaining space. When the EA value exactly fills the remaining buffer (buf_free_len == 0 after value subtraction), the alignment memset writes 1-3 NUL bytes past the buf_free_len boundary. In compound requests where the response buffer is shared across commands, the first command (e.g., READ) can consume most of the buffer, leaving a tight remainder for the QUERY_INFO EA response. The alignment memset then overwrites past the physical kvmalloc allocation into adjacent kernel heap memory. Add a bounds check before the alignment memset to ensure buf_free_len can accommodate the padding bytes. This is the same bug pattern fixed by commit beef2634f81f ("ksmbd: fix potencial OOB in get_file_all_info() for compound requests") and commit fda9522ed6af ("ksmbd: fix OOB write in QUERY_INFO for compound requests"), both of which added bounds checks before unconditional writes in QUERY_INFO response handlers.

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp: Don't attempt to copy CSR to userspace if PSP command failed When retrieving the PEK CSR, don't attempt to copy the blob to userspace if the firmware command failed. If the failure was due to an invalid length, i.e. the userspace buffer+length was too small, copying the number of bytes _firmware_ requires will overflow the kernel-allocated buffer and leak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 2084 at addr ffff898144612e20 by task syz.9.219/21405 CPU: 14 UID: 0 PID: 21405 Comm: syz.9.219 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025 Call Trace: <TASK> dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120 print_address_description ../mm/kasan/report.c:378 [inline] print_report+0xbc/0x260 ../mm/kasan/report.c:482 kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595 check_region_inline ../mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200 instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 copy_to_user ../include/linux/uaccess.h:236 [inline] sev_ioctl_do_pek_csr+0x31f/0x590 ../drivers/crypto/ccp/sev-dev.c:1872 sev_ioctl+0x3a4/0x490 ../drivers/crypto/ccp/sev-dev.c:2562 vfs_ioctl ../fs/ioctl.c:51 [inline] __do_sys_ioctl ../fs/ioctl.c:597 [inline] __se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> WARN if the driver says the command succeeded, but the firmware error code says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any firwmware error.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate response sizes in ipc_validate_msg() ipc_validate_msg() computes the expected message size for each response type by adding (or multiplying) attacker-controlled fields from the daemon response to a fixed struct size in unsigned int arithmetic. Three cases can overflow: KSMBD_EVENT_RPC_REQUEST: msg_sz = sizeof(struct ksmbd_rpc_command) + resp->payload_sz; KSMBD_EVENT_SHARE_CONFIG_REQUEST: msg_sz = sizeof(struct ksmbd_share_config_response) + resp->payload_sz; KSMBD_EVENT_LOGIN_REQUEST_EXT: msg_sz = sizeof(struct ksmbd_login_response_ext) + resp->ngroups * sizeof(gid_t); resp->payload_sz is __u32 and resp->ngroups is __s32. Each addition can wrap in unsigned int; the multiplication by sizeof(gid_t) mixes signed and size_t, so a negative ngroups is converted to SIZE_MAX before the multiply. A wrapped value of msg_sz that happens to equal entry->msg_sz bypasses the size check on the next line, and downstream consumers (smb2pdu.c:6742 memcpy using rpc_resp->payload_sz, kmemdup in ksmbd_alloc_user using resp_ext->ngroups) then trust the unverified length. Use check_add_overflow() on the RPC_REQUEST and SHARE_CONFIG_REQUEST paths to detect integer overflow without constraining functional payload size; userspace ksmbd-tools grows NDR responses in 4096-byte chunks for calls like NetShareEnumAll, so a hard transport cap is unworkable on the response side. For LOGIN_REQUEST_EXT, reject resp->ngroups outside the signed [0, NGROUPS_MAX] range up front and report the error from ipc_validate_msg() so it fires at the IPC boundary; with that bound the subsequent multiplication and addition stay well below UINT_MAX. The now-redundant ngroups check and pr_err in ksmbd_alloc_user() are removed. This is the response-side analogue of aab98e2dbd64 ("ksmbd: fix integer overflows on 32 bit systems"), which hardened the request side.

Unspecified vulnerability in Adobe Flash Player 21.0.0.242 and earlier, as used in the Adobe Flash libraries in Microsoft Internet Explorer 10 and 11 and Microsoft Edge, has unknown impact and attack vectors, a different vulnerability than other CVEs listed in MS16-083.

In the Linux kernel, the following vulnerability has been resolved: firmware: thead: Fix buffer overflow and use standard endian macros Addresses two issues in the TH1520 AON firmware protocol driver: 1. Fix a potential buffer overflow where the code used unsafe pointer arithmetic to access the 'mode' field through the 'resource' pointer with an offset. This was flagged by Smatch static checker as: "buffer overflow 'data' 2 <= 3" 2. Replace custom RPC_SET_BE* and RPC_GET_BE* macros with standard kernel endianness conversion macros (cpu_to_be16, etc.) for better portability and maintainability. The functionality was re-tested with the GPU power-up sequence, confirming the GPU powers up correctly and the driver probes successfully. [ 12.702370] powervr ffef400000.gpu: [drm] loaded firmware powervr/rogue_36.52.104.182_v1.fw [ 12.711043] powervr ffef400000.gpu: [drm] FW version v1.0 (build 6645434 OS) [ 12.719787] [drm] Initialized powervr 1.0.0 for ffef400000.gpu on minor 0

Skia, as used in Google Chrome before 25.0.1364.97 on Windows and Linux, and before 25.0.1364.99 on Mac OS X, allows remote attackers to cause a denial of service (incorrect read operation) via unspecified vectors.

A TOCTOU mismatch in the NFS client code in the Linux kernel before 5.8.3 could be used by local attackers to corrupt memory or possibly have unspecified other impact because a size check is in fs/nfs/nfs4proc.c instead of fs/nfs/nfs4xdr.c, aka CID-b4487b935452.

Adobe Flash Player before 18.0.0.329 and 19.x and 20.x before 20.0.0.306 on Windows and OS X and before 11.2.202.569 on Linux, Adobe AIR before 20.0.0.260, Adobe AIR SDK before 20.0.0.260, and Adobe AIR SDK & Compiler before 20.0.0.260 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2016-0964, CVE-2016-0965, CVE-2016-0967, CVE-2016-0968, CVE-2016-0969, CVE-2016-0970, CVE-2016-0972, CVE-2016-0976, CVE-2016-0977, CVE-2016-0978, CVE-2016-0979, CVE-2016-0980, and CVE-2016-0981.

Adobe Flash Player before 18.0.0.343 and 19.x through 21.x before 21.0.0.213 on Windows and OS X and before 11.2.202.616 on Linux allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2016-1020, CVE-2016-1021, CVE-2016-1022, CVE-2016-1023, CVE-2016-1024, CVE-2016-1025, CVE-2016-1026, CVE-2016-1027, CVE-2016-1028, CVE-2016-1029, CVE-2016-1032, and CVE-2016-1033.

Out of bounds write in V8 in Google Chrome prior to 139.0.7258.138 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

Google Chrome before 25.0.1364.97 on Windows and Linux, and before 25.0.1364.99 on Mac OS X, allows remote attackers to cause a denial of service (incorrect read operation) via crafted data in the Matroska container format.

Multiple unspecified vulnerabilities in the IPC layer in Google Chrome before 25.0.1364.97 on Windows and Linux, and before 25.0.1364.99 on Mac OS X, allow remote attackers to cause a denial of service (memory corruption) or possibly have other impact via unknown vectors.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ife: Fix metalist update behavior Whenever an ife action replace changes the metalist, instead of replacing the old data on the metalist, the current ife code is appending the new metadata. Aside from being innapropriate behavior, this may lead to an unbounded addition of metadata to the metalist which might cause an out of bounds error when running the encode op: [ 138.423369][ C1] ================================================================== [ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255 [ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full) [ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 138.425800][ C1] Call Trace: [ 138.425804][ C1] <IRQ> [ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122) [ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) [ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1)) [ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597) [ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1)) [ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2)) [ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171) [ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57) [ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114) [ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3)) [ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45) [ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879) To solve this issue, fix the replace behavior by adding the metalist to the ife rcu data structure.

In the Linux kernel, the following vulnerability has been resolved: Buffer overflow in drivers/xen/sys-hypervisor.c The build id returned by HYPERVISOR_xen_version(XENVER_build_id) is neither NUL terminated nor a string. The first causes a buffer overflow as sprintf in buildid_show will read and copy till it finds a NUL. 00000000 f4 91 51 f4 dd 38 9e 9d 65 47 52 eb 10 71 db 50 |..Q..8..eGR..q.P| 00000010 b9 a8 01 42 6f 2e 32 |...Bo.2| 00000017 So use a memcpy instead of sprintf to have the correct value: 00000000 f4 91 51 f4 dd 00 9e 9d 65 47 52 eb 10 71 db 50 |..Q.....eGR..q.P| 00000010 b9 a8 01 42 |...B| 00000014 (the above have a hack to embed a zero inside and check it's returned correctly). This is XSA-485 / CVE-2026-31786

A race condition was found in the Linux kernel's IP framework for transforming packets (XFRM subsystem) when multiple calls to xfrm_probe_algs occurred simultaneously. This flaw could allow a local attacker to potentially trigger an out-of-bounds write or leak kernel heap memory by performing an out-of-bounds read and copying it into a socket.

A heap-based buffer overflow was found in the Linux kernel's LightNVM subsystem. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. This vulnerability allows a local attacker to escalate privileges and execute arbitrary code in the context of the kernel. The attacker must first obtain the ability to execute high-privileged code on the target system to exploit this vulnerability.

A flaw was found in the Linux kernel’s driver for the ASIX AX88179_178A-based USB 2.0/3.0 Gigabit Ethernet Devices. The vulnerability contains multiple out-of-bounds reads and possible out-of-bounds writes.

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix gmap_helper_zap_one_page() again A few checks were missing in gmap_helper_zap_one_page(), which can lead to memory corruption in the guest under specific circumstances. Add the missing checks.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtl8xxxu: fix slab-out-of-bounds in rtl8xxxu_sta_add The driver does not set hw->sta_data_size, which causes mac80211 to allocate insufficient space for driver private station data in __sta_info_alloc(). When rtl8xxxu_sta_add() accesses members of struct rtl8xxxu_sta_info through sta->drv_priv, this results in a slab-out-of-bounds write. KASAN report on RISC-V (VisionFive 2) with RTL8192EU adapter: BUG: KASAN: slab-out-of-bounds in rtl8xxxu_sta_add+0x31c/0x346 Write of size 8 at addr ffffffd6d3e9ae88 by task kworker/u16:0/12 Set hw->sta_data_size to sizeof(struct rtl8xxxu_sta_info) during probe, similar to how hw->vif_data_size is configured. This ensures mac80211 allocates sufficient space for the driver's per-station private data. Tested on StarFive VisionFive 2 v1.2A board.

In the Linux kernel, the following vulnerability has been resolved: iomap: Fix possible overflow condition in iomap_write_delalloc_scan folio_next_index() returns an unsigned long value which left shifted by PAGE_SHIFT could possibly cause an overflow on 32-bit system. Instead use folio_pos(folio) + folio_size(folio), which does this correctly.

In the Linux kernel, the following vulnerability has been resolved: uprobe: avoid out-of-bounds memory access of fetching args Uprobe needs to fetch args into a percpu buffer, and then copy to ring buffer to avoid non-atomic context problem. Sometimes user-space strings, arrays can be very large, but the size of percpu buffer is only page size. And store_trace_args() won't check whether these data exceeds a single page or not, caused out-of-bounds memory access. It could be reproduced by following steps: 1. build kernel with CONFIG_KASAN enabled 2. save follow program as test.c ``` \#include <stdio.h> \#include <stdlib.h> \#include <string.h> // If string length large than MAX_STRING_SIZE, the fetch_store_strlen() // will return 0, cause __get_data_size() return shorter size, and // store_trace_args() will not trigger out-of-bounds access. // So make string length less than 4096. \#define STRLEN 4093 void generate_string(char *str, int n) { int i; for (i = 0; i < n; ++i) { char c = i % 26 + 'a'; str[i] = c; } str[n-1] = '\0'; } void print_string(char *str) { printf("%s\n", str); } int main() { char tmp[STRLEN]; generate_string(tmp, STRLEN); print_string(tmp); return 0; } ``` 3. compile program `gcc -o test test.c` 4. get the offset of `print_string()` ``` objdump -t test | grep -w print_string 0000000000401199 g F .text 000000000000001b print_string ``` 5. configure uprobe with offset 0x1199 ``` off=0x1199 cd /sys/kernel/debug/tracing/ echo "p /root/test:${off} arg1=+0(%di):ustring arg2=\$comm arg3=+0(%di):ustring" > uprobe_events echo 1 > events/uprobes/enable echo 1 > tracing_on ``` 6. run `test`, and kasan will report error. ================================================================== BUG: KASAN: use-after-free in strncpy_from_user+0x1d6/0x1f0 Write of size 8 at addr ffff88812311c004 by task test/499CPU: 0 UID: 0 PID: 499 Comm: test Not tainted 6.12.0-rc3+ #18 Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x55/0x70 print_address_description.constprop.0+0x27/0x310 kasan_report+0x10f/0x120 ? strncpy_from_user+0x1d6/0x1f0 strncpy_from_user+0x1d6/0x1f0 ? rmqueue.constprop.0+0x70d/0x2ad0 process_fetch_insn+0xb26/0x1470 ? __pfx_process_fetch_insn+0x10/0x10 ? _raw_spin_lock+0x85/0xe0 ? __pfx__raw_spin_lock+0x10/0x10 ? __pte_offset_map+0x1f/0x2d0 ? unwind_next_frame+0xc5f/0x1f80 ? arch_stack_walk+0x68/0xf0 ? is_bpf_text_address+0x23/0x30 ? kernel_text_address.part.0+0xbb/0xd0 ? __kernel_text_address+0x66/0xb0 ? unwind_get_return_address+0x5e/0xa0 ? __pfx_stack_trace_consume_entry+0x10/0x10 ? arch_stack_walk+0xa2/0xf0 ? _raw_spin_lock_irqsave+0x8b/0xf0 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? depot_alloc_stack+0x4c/0x1f0 ? _raw_spin_unlock_irqrestore+0xe/0x30 ? stack_depot_save_flags+0x35d/0x4f0 ? kasan_save_stack+0x34/0x50 ? kasan_save_stack+0x24/0x50 ? mutex_lock+0x91/0xe0 ? __pfx_mutex_lock+0x10/0x10 prepare_uprobe_buffer.part.0+0x2cd/0x500 uprobe_dispatcher+0x2c3/0x6a0 ? __pfx_uprobe_dispatcher+0x10/0x10 ? __kasan_slab_alloc+0x4d/0x90 handler_chain+0xdd/0x3e0 handle_swbp+0x26e/0x3d0 ? __pfx_handle_swbp+0x10/0x10 ? uprobe_pre_sstep_notifier+0x151/0x1b0 irqentry_exit_to_user_mode+0xe2/0x1b0 asm_exc_int3+0x39/0x40 RIP: 0033:0x401199 Code: 01 c2 0f b6 45 fb 88 02 83 45 fc 01 8b 45 fc 3b 45 e4 7c b7 8b 45 e4 48 98 48 8d 50 ff 48 8b 45 e8 48 01 d0 ce RSP: 002b:00007ffdf00576a8 EFLAGS: 00000206 RAX: 00007ffdf00576b0 RBX: 0000000000000000 RCX: 0000000000000ff2 RDX: 0000000000000ffc RSI: 0000000000000ffd RDI: 00007ffdf00576b0 RBP: 00007ffdf00586b0 R08: 00007feb2f9c0d20 R09: 00007feb2f9c0d20 R10: 0000000000000001 R11: 0000000000000202 R12: 0000000000401040 R13: 00007ffdf0058780 R14: 0000000000000000 R15: 0000000000000000 </TASK> This commit enforces the buffer's maxlen less than a page-size to avoid store_trace_args() out-of-memory access.

An out-of-bounds memory write flaw was found in how the Linux kernel’s Voice Over IP H.323 connection tracking functionality handled connections on ipv6 port 1720. This flaw allows an unauthenticated remote user to crash the system, causing a denial of service. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability.

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix OOB write in bnxt_re_copy_err_stats() Commit ef56081d1864 ("RDMA/bnxt_re: RoCE related hardware counters update") added three new counters and placed them after BNXT_RE_OUT_OF_SEQ_ERR. BNXT_RE_OUT_OF_SEQ_ERR acts as a boundary marker for allocating hardware statistics with different num_counters values on chip_gen_p5_p7 devices. As a result, BNXT_RE_NUM_STD_COUNTERS are used when allocating hw_stats, which leads to an out-of-bounds write in bnxt_re_copy_err_stats(). The counters BNXT_RE_REQ_CQE_ERROR, BNXT_RE_RESP_CQE_ERROR, and BNXT_RE_RESP_REMOTE_ACCESS_ERRS are applicable to generic hardware, not only p5/p7 devices. Fix this by moving these counters before BNXT_RE_OUT_OF_SEQ_ERR so they are included in the generic counter set.

An out-of-bounds memory write flaw was found in the Linux kernel’s Kid-friendly Wired Controller driver. This flaw allows a local user to crash or potentially escalate their privileges on the system. It is in bigben_probe of drivers/hid/hid-bigbenff.c. The reason is incorrect assumption - bigben devices all have inputs. However, malicious devices can break this assumption, leaking to out-of-bound write.

NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where an unprivileged regular user on the network can cause an out-of-bounds write through a specially crafted shader, which may lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. The scope of the impact may extend to other components.

NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the ECC layer, where an unprivileged regular user can cause an out-of-bounds write, which may lead to denial of service and data tampering.

An issue was discovered in the Linux kernel before 5.6.7. xdp_umem_reg in net/xdp/xdp_umem.c has an out-of-bounds write (by a user with the CAP_NET_ADMIN capability) because of a lack of headroom validation.

A heap buffer overflow flaw was found in IPsec ESP transformation code in net/ipv4/esp4.c and net/ipv6/esp6.c. This flaw allows a local attacker with a normal user privilege to overwrite kernel heap objects and may cause a local privilege escalation threat.

An issue was found in Linux kernel before 5.5.4. The mwifiex_cmd_append_vsie_tlv() function in drivers/net/wireless/marvell/mwifiex/scan.c allows local users to gain privileges or cause a denial of service because of an incorrect memcpy and buffer overflow, aka CID-b70261a288ea.