A vulnerability was found in LB-LINK AC1900 Router 1.0.2 and classified as critical. Affected by this issue is the function websGetVar of the file /goform/set_blacklist. The manipulation of the argument mac/enable leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

giting version prior to 0.0.8 allows execution of arbritary commands. The first argument "repo" of function "pull()" is executed by the package without any validation.

A vulnerability has been found in Sangfor Operation and Maintenance Management System up to 3.0.8. This vulnerability affects the function uploadCN of the file VersionController.java. The manipulation of the argument filename leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in hzmanyun Education and Training System 3.1.1. Affected by this vulnerability is the function pdf2swf of the file /pdf2swf. The manipulation of the argument file leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in LB-LINK AC1900 Router 1.0.2 and classified as critical. Affected by this vulnerability is the function websGetVar of the file /goform/set_cmd. The manipulation of the argument cmd leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Sangfor Operation and Maintenance Management System up to 3.0.8. Impacted is the function WriterHandle.getCmd of the file /isomp-protocol/protocol/getCmd. This manipulation of the argument sessionPath causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

Anthropic Claude Code CLI and Claude Agent SDK contain an OS command injection vulnerability in authentication helper execution where helper configuration values are executed using shell=true without input validation. Attackers who can influence authentication settings can inject shell metacharacters through parameters like apiKeyHelper, awsAuthRefresh, awsCredentialExport, and gcpAuthRefresh to execute arbitrary commands with the privileges of the user or automation environment, enabling credential theft and environment variable exfiltration.

A vulnerability was detected in TRENDnet TEW-713RE 1.02. The impacted element is an unknown function of the file /goformX/formFSrvX. The manipulation of the argument SZCMD results in os command injection. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor confirms: "The product in question TEW-731RE for CVE-2025-15471 has been discontinued and end of life since October 23, 2020. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on the website product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

An unauthenticated attacker can inject OS commands when calling a server API endpoint in NesterSoft WorkTime. The server API call to generate and download the WorkTime client from the WorkTime server is vulnerable in the “guid” parameter. This allows an attacker to execute arbitrary commands on the WorkTime server as NT Authority\SYSTEM with the highest privileges. Attackers are able to access or manipulate sensitive data and take over the whole server.

A vulnerability, which was classified as critical, was found in Tenda AC7 1200M 15.03.06.44. Affected is the function TendaTelnet of the file /goform/telnet. The manipulation of the argument lan_ip leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was identified in Sangfor Operation and Maintenance Management System up to 3.0.8. The affected element is the function SessionController of the file /isomp-protocol/protocol/session. Such manipulation of the argument Hostname leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

OS command injection vulnerability in drivers_syno_import_user.php in Synology Calendar before 2.3.1-0617 allows remote attackers to execute arbitrary commands via the crafted 'X-Real-IP' header.

Plexus-utils before 3.0.16 is vulnerable to command injection because it does not correctly process the contents of double quoted strings.

A vulnerability was found in Sangfor Operation and Maintenance Management System up to 3.0.8. This issue affects some unknown processing of the file /isomp-protocol/protocol/getHis of the component HTTP POST Request Handler. The manipulation of the argument sessionPath results in os command injection. The attack may be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

Mini Mouse 9.2.0 contains a remote code execution vulnerability that allows attackers to execute arbitrary commands through an unauthenticated HTTP endpoint. Attackers can leverage the /op=command endpoint to download and execute payloads by sending crafted JSON requests with malicious script commands.

A vulnerability was determined in TOTOLINK X5000R 9.1.0cu.2089_B20211224. Affected by this issue is the function snprintf of the file /cgi-bin/cstecgi.cgi?action=exportOvpn&type=user. This manipulation of the argument User causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.

A vulnerability was detected in Edimax BR-6478AC V3 1.0.15. Impacted is the function sub_416990 of the file /boafrm/formTracerouteDiagnosticRun. The manipulation of the argument host results in os command injection. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Totolink A830R V5.9c.4729_B20191112, A3100R V4.1.2cu.5050_B20200504, A950RG V4.1.2cu.5161_B20200903, A800R V4.1.2cu.5137_B20200730, A3000RU V5.9c.5185_B20201128, and A810R V4.1.2cu.5182_B20201026 were discovered to contain a command injection vulnerability in the function setWebWlanIdx, via the webWlanIdx parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

Selea Targa IP OCR-ANPR Camera contains an unauthenticated command injection vulnerability in utils.php that allows remote attackers to execute arbitrary shell commands. Attackers can exploit the 'addr' and 'port' parameters to inject commands and gain www-data user access through chained local file inclusion techniques.

Hasura GraphQL 1.3.3 contains a remote code execution vulnerability that allows attackers to execute arbitrary shell commands through SQL query manipulation. Attackers can inject commands into the run_sql endpoint by crafting malicious GraphQL queries that execute system commands through PostgreSQL's COPY FROM PROGRAM functionality.

Akeneo PIM CE and EE <1.6.6, <1.5.15, <1.4.28 are vulnerable to shell injection in the mass edition, resulting in remote execution.

A flaw has been found in Edimax BR-6478AC V3 1.0.15. The affected element is the function sub_44CCE4 of the file /boafrm/formSysCmd. This manipulation of the argument sysCmd causes os command injection. The attack may be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

ThinPLUS developed by ThinPLUS has an OS Command Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the server.

gpg-key2ps in signing-party 1.1.x and 2.x before 2.10-1 contains an unsafe shell call enabling shell injection via a User ID.

An issue was discovered in Pascom Cloud Phone System before 7.20.x. In the management REST API, /services/apply in exd.pl allows remote attackers to execute arbitrary code via shell metacharacters.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetNetCheckTools. This vulnerability allows attackers to execute arbitrary commands via the hostName parameter.

A command injection vulnerability in the UPnP function of the Zyxel EX3510-B0 firmware versions through 5.17(ABUP.15.1)C0 could allow a remote attacker to execute operating system (OS) commands on an affected device by sending specially crafted UPnP SOAP requests.

In TOTOLINK X6000R V9.4.0cu.852_B20230719, the shttpd file, sub_4119A0 function obtains fields from the front-end through Uci_ Set_ The Str function when passed to the CsteSystem function creates a command execution vulnerability.

Due to the improper neutralisation of special elements used in an OS command, an unauthenticated remote attacker can exploit an RCE vulnerability in the com_mb24sysapi module, resulting in full system compromise. This vulnerability is a variant attack for CVE-2020-10383.

A security vulnerability has been detected in D-Link DAP-2695 2.00RC13. The impacted element is the function sub_4174B0 of the component Firmware Update Handler. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Telesquare SDT-CW3B1 1.1.0 is affected by an OS command injection vulnerability that allows a remote attacker to execute OS commands without any authentication.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetUSBShareInfo. This vulnerability allows attackers to execute arbitrary commands via the usbOrdinaryUserName parameter.

An issue was discovered in D-Link DIR-806 devices. There is a command injection in function hnap_main, which calls system() without checking the parameter that can be controlled by user, and finally allows remote attackers to execute arbitrary shell commands with a special HTTP header.

BeyondTrust Remote Support (RS) and certain older versions of Privileged Remote Access (PRA) contain a critical pre-authentication remote code execution vulnerability. By sending specially crafted requests, an unauthenticated remote attacker may be able to execute operating system commands in the context of the site user.

The iSherlock developed by HGiga has an OS Command Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the server.

BibTeX-ruby before 5.1.0 allows shell command injection due to unsanitized user input being passed directly to the built-in Ruby Kernel.open method through BibTeX.open.

In GenieACS 1.2.x before 1.2.8, the UI interface API is vulnerable to unauthenticated OS command injection via the ping host argument (lib/ui/api.ts and lib/ping.ts). The vulnerability arises from insufficient input validation combined with a missing authorization check.

totolink a3100r V5.9c.4577 is vulnerable to os command injection. The backend of a page is executing the "ping" command, and the input field does not adequately filter special symbols. This can lead to command injection attacks.

Remote Code Execution (RCE) vulnerability exists in D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin. Malicious users can use this vulnerability to use "\ " or backticks to bypass the shell metacharacters in the ssid0 or ssid1 parameters to execute arbitrary commands.This vulnerability is due to the fact that CVE-2019-17509 is not fully patched and can be bypassed by using line breaks or backticks on its basis.

The Metro Development Server, which is opened by the React Native Community CLI, binds to external interfaces by default. The server exposes an endpoint that is vulnerable to OS command injection. This allows unauthenticated network attackers to send a POST request to the server and run arbitrary executables. On Windows, the attackers can also execute arbitrary shell commands with fully controlled arguments.

Remote Command Execution (RCE) vulnerability exists in HNAP1/control/SetWizardConfig.php in D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin. Malicoius users can use this vulnerability to use "\ " or backticks in the shell metacharacters in the ssid0 or ssid1 parameters to cause arbitrary command execution. Since CVE-2019-17510 vulnerability has not been patched and improved www/hnap1/control/setwizardconfig.php, can also use line breaks and backquotes to bypass.

NETGEAR DGN1000 before 1.1.00.48 is vulnerable to an authentication bypass vulnerability. A remote and unauthenticated attacker can execute arbitrary operating system commands as root by sending crafted HTTP requests to the setup.cgi endpoint. This vulnerability has been observed to be exploited in the wild since at least 2017 and specifically by the Shadowserver Foundation on 2025-02-06 UTC.

A vulnerability, which was classified as critical, was found in DrayTek Vigor2960 and Vigor300B 1.5.1.4. Affected is an unknown function of the file /cgi-bin/mainfunction.cgi/apmcfgupload of the component Web Management Interface. The manipulation of the argument session leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

A flaw was found in Exim versions 4.87 to 4.91 (inclusive). Improper validation of recipient address in deliver_message() function in /src/deliver.c may lead to remote command execution.

A vulnerability was detected in D-Link DAP-2695 2.00RC131. This affects the function fwupdater_main of the file rgbin of the component Firmware Update Handler. Performing manipulation results in os command injection. The attack may be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

rpi through 0.0.3 allows execution of arbritary commands. The variable pinNumbver in function GPIO within src/lib/gpio.js is used as part of the arguement of exec function without any sanitization.

All versions of the package check-branches are vulnerable to Command Injection check-branches is a command-line tool that is interacted with locally, or via CI, to confirm no conflicts exist in git branches. However, the library follows these conventions which can be abused: 1. It trusts branch names as they are (plain text) 2. It spawns git commands by concatenating user input Since a branch name is potentially a user input - as users can create branches remotely via pull requests, or simply due to privileged access to a repository - it can effectively be abused to run any command.

A vulnerability has been found in wonderwhy-er DesktopCommanderMCP up to 0.2.13. The affected element is the function extractBaseCommand of the file src/command-manager.ts of the component Absolute Path Handler. Such manipulation leads to os command injection. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. The vendor explains: "The usual use case is that AI is asked to do something, picks commands itself, and typically uses simple command names without absolute paths. It's curious why a user would ask the model to bypass restrictions this way. (...) This could potentially be a problem, but we are yet to hear reports of this being an issue in actual workflows. We'll leave this issue open for situations where people may report this as a problem for the long term."

A weakness has been identified in D-Link DI-7001 MINI 24.04.18B1. Impacted is an unknown function of the file /upgrade_filter.asp. This manipulation of the argument path causes os command injection. The attack may be initiated remotely. The exploit has been made available to the public and could be exploited.

php-shellcommand versions before 1.6.1 have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.