Werkzeug is a comprehensive WSGI web application library. Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses `request.data`, `request.form`, `request.files`, or `request.get_data(parse_form_data=False)`, it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers. Version 2.2.3 contains a patch for this issue.

An unauthenticated remote attacker can cause a Denial of Service by sending a large number of requests to the http service on port 80.

An issue was discovered in GitLab CE/EE affecting all versions starting from 17.2 before 18.2.7, 18.3 before 18.3.3, and 18.4 before 18.4.1, that allows an attacker to cause uncontrolled CPU consumption, potentially leading to a Denial of Service (DoS) condition while using specific GraphQL queries.

Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt brute-force attacks against the login page. Users should upgrade to v12.0 or later to receive a patch. As a workaround, users may install and configure a rate-limiting proxy in front of Kiwi TCMS.

Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt denial-of-service attacks against the Password reset page. An attacker could potentially send a large number of emails if they know the email addresses of users in Kiwi TCMS. Additionally that may strain SMTP resources. Users should upgrade to v12.0 or later to receive a patch. As potential workarounds, users may install and configure a rate-limiting proxy in front of Kiwi TCMS and/or configure rate limits on their email server when possible.

Starlite is an Asynchronous Server Gateway Interface (ASGI) framework. Prior to version 1.5.2, the request body parsing in `starlite` allows a potentially unauthenticated attacker to consume a large amount of CPU time and RAM. The multipart body parser processes an unlimited number of file parts and an unlimited number of field parts. This is a remote, potentially unauthenticated Denial of Service vulnerability. This vulnerability affects applications with a request handler that accepts a `Body(media_type=RequestEncodingType.MULTI_PART)`. The large amount of CPU time required for processing requests can block all available worker processes and significantly delay or slow down the processing of legitimate user requests. The large amount of RAM accumulated while processing requests can lead to Out-Of-Memory kills. Complete DoS is achievable by sending many concurrent multipart requests in a loop. Version 1.51.2 contains a patch for this issue.

Dell PowerScale OneFS, versions 9.5.0.0 through 9.10.0.0, contains an uncontrolled resource consumption vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service.

@fastify/multipart is a Fastify plugin to parse the multipart content-type. Prior to versions 7.4.1 and 6.0.1, @fastify/multipart may experience denial of service due to a number of situations in which an unlimited number of parts are accepted. This includes the multipart body parser accepting an unlimited number of file parts, the multipart body parser accepting an unlimited number of field parts, and the multipart body parser accepting an unlimited number of empty parts as field parts. This is fixed in v7.4.1 (for Fastify v4.x) and v6.0.1 (for Fastify v3.x). There are no known workarounds.

Boxo, formerly known as go-libipfs, is a library for building IPFS applications and implementations. In versions 0.4.0 and 0.5.0, if an attacker is able allocate arbitrary many bytes in the Bitswap server, those allocations are lasting even if the connection is closed. This affects users accepting untrusted connections with the Bitswap server and also affects users using the old API stubs at `github.com/ipfs/go-libipfs/bitswap` because users then transitively import `github.com/ipfs/go-libipfs/bitswap/server`. Boxo versions 0.6.0 and 0.4.1 contain a patch for this issue. As a workaround, those who are using the stub object at `github.com/ipfs/go-libipfs/bitswap` not taking advantage of the features provided by the server can refactor their code to use the new split API that will allow them to run in a client only mode: `github.com/ipfs/go-libipfs/bitswap/client`.

Monero through 0.18.3.4 before ec74ff4 does not have response limits on HTTP server connections.

hb-ot-layout-gsubgpos.hh in HarfBuzz through 6.0.0 allows attackers to trigger O(n^2) growth via consecutive marks during the process of looking back for base glyphs when attaching marks.

Apache Commons FileUpload before 1.5 does not limit the number of request parts to be processed resulting in the possibility of an attacker triggering a DoS with a malicious upload or series of uploads. Note that, like all of the file upload limits, the new configuration option (FileUploadBase#setFileCountMax) is not enabled by default and must be explicitly configured.

Multipart form parsing can consume large amounts of CPU and memory when processing form inputs containing very large numbers of parts. This stems from several causes: 1. mime/multipart.Reader.ReadForm limits the total memory a parsed multipart form can consume. ReadForm can undercount the amount of memory consumed, leading it to accept larger inputs than intended. 2. Limiting total memory does not account for increased pressure on the garbage collector from large numbers of small allocations in forms with many parts. 3. ReadForm can allocate a large number of short-lived buffers, further increasing pressure on the garbage collector. The combination of these factors can permit an attacker to cause an program that parses multipart forms to consume large amounts of CPU and memory, potentially resulting in a denial of service. This affects programs that use mime/multipart.Reader.ReadForm, as well as form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue. With fix, ReadForm now does a better job of estimating the memory consumption of parsed forms, and performs many fewer short-lived allocations. In addition, the fixed mime/multipart.Reader imposes the following limits on the size of parsed forms: 1. Forms parsed with ReadForm may contain no more than 1000 parts. This limit may be adjusted with the environment variable GODEBUG=multipartmaxparts=. 2. Form parts parsed with NextPart and NextRawPart may contain no more than 10,000 header fields. In addition, forms parsed with ReadForm may contain no more than 10,000 header fields across all parts. This limit may be adjusted with the environment variable GODEBUG=multipartmaxheaders=.

Due to insufficient length validation in the Open5GS GTP library versions prior to versions 2.4.13 and 2.5.7, when parsing extension headers in GPRS tunneling protocol (GPTv1-U) messages, a protocol payload with any extension header length set to zero causes an infinite loop. The affected process becomes immediately unresponsive, resulting in denial of service and excessive resource consumption. CVSS3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C

Spring Data Commons, versions 1.13 to 1.13.10, 2.0 to 2.0.5, and older unsupported versions, contain a property path parser vulnerability caused by unlimited resource allocation. An unauthenticated remote malicious user (or attacker) can issue requests against Spring Data REST endpoints or endpoints using property path parsing which can cause a denial of service (CPU and memory consumption).

Astro is a web framework. Prior to version 10.0.0, Astro's Server Islands POST handler buffers and parses the full request body as JSON without enforcing a size limit. Because JSON.parse() allocates a V8 heap object for every element in the input, a crafted payload of many small JSON objects achieves ~15x memory amplification (wire bytes to heap bytes), allowing a single unauthenticated request to exhaust the process heap and crash the server. The /_server-islands/[name] route is registered on all Astro SSR apps regardless of whether any component uses server:defer, and the body is parsed before the island name is validated, so any Astro SSR app with the Node standalone adapter is affected. This issue has been patched in version 10.0.0.

In Django 3.2 before 3.2.17, 4.0 before 4.0.9, and 4.1 before 4.1.6, the parsed values of Accept-Language headers are cached in order to avoid repetitive parsing. This leads to a potential denial-of-service vector via excessive memory usage if the raw value of Accept-Language headers is very large.

An issue was discovered in GitLab CE/EE affecting all versions before 18.2.7, 18.3 before 18.3.3, and 18.4 before 18.4.1 that allows unauthenticated users to cause a Denial of Service (DoS) condition while uploading specifically crafted large JSON files.

A vulnerability in the Internet Key Exchange version 2 (IKEv2) function of Cisco IOS XR Software could allow an unauthenticated, remote attacker to prevent an affected device from processing any control plane UDP packets.  This vulnerability is due to improper handling of malformed IKEv2 packets. An attacker could exploit this vulnerability by sending malformed IKEv2 packets to an affected device. A successful exploit could allow the attacker to prevent the affected device from processing any control plane UDP packets, resulting in a denial of service (DoS) condition. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

An Allocation of Resources Without Limits or Throttling vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). On QFX10K Series, Inter-Chassis Control Protocol (ICCP) is used in MC-LAG topologies to exchange control information between the devices in the topology. ICCP connection flaps and sync issues will be observed due to excessive specific traffic to the local device. This issue affects Juniper Networks Junos OS on QFX10K Series: * All versions prior to 20.2R3-S7; * 20.4 versions prior to 20.4R3-S4; * 21.1 versions prior to 21.1R3-S3; * 21.2 versions prior to 21.2R3-S1; * 21.3 versions prior to 21.3R3; * 21.4 versions prior to 21.4R3; * 22.1 versions prior to 22.1R2.

In BIP-IP versions 17.0.x before 17.0.0.2, 16.1.x before 16.1.3.3, 15.1.x before 15.1.8.1, 14.1.x before 14.1.5.3, and all versions of 13.1.x, when OCSP authentication profile is configured on a virtual server, undisclosed requests can cause an increase in CPU resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

CWE-770: Allocation of Resources Without Limits or Throttling vulnerability exists that could cause communications to stop when malicious packets are sent to the webserver of the device.

React Router is a router for React. In versions 7.7.0 through 7.13.1, when using React Router's unstable React Server Components (RSC) APIs, there is a potential client-side Cross-Site Scripting (XSS) vulnerability in the RSC redirect handling if redirects come from untrusted sources. This does not impact applications that are not using the unstable RSC APIs in React Router. This is patched in version 7.13.2.

Fedify is a TypeScript library for building federated server apps powered by ActivityPub. Prior to 1.9.6, 1.10.5, 2.0.8, and 2.1.1, @fedify/fedify follows HTTP redirects recursively in its remote document loader and authenticated document loader without enforcing a maximum redirect count or visited-URL loop detection. An attacker who controls a remote ActivityPub key or actor URL can force a server using Fedify to make repeated outbound requests from a single inbound request, leading to resource consumption and denial of service. This vulnerability is fixed in 1.9.6, 1.10.5, 2.0.8, and 2.1.1.

Mesop is a Python-based UI framework that allows users to build web applications. From version 1.2.3 to before version 1.2.5, an uncontrolled resource consumption vulnerability exists in the WebSocket implementation of the Mesop framework. An unauthenticated attacker can send a rapid succession of WebSocket messages, forcing the server to spawn an unbounded number of operating system threads. This leads to thread exhaustion and Out of Memory (OOM) errors, causing a complete Denial of Service (DoS) for any application built on the framework. This issue has been patched in version 1.2.5.

An issue has been discovered in GitLab CE/EE affecting all versions from 8.13 before 17.10.7, 17.11 before 17.11.3, and 18.0 before 18.0.1. A lack of input validation in Board Names could be used to trigger a denial of service.

A Regular Expression Denial of Service (ReDOS) vulnerability was discovered in Vfsjfilechooser2 version 0.2.9 and below which occurs when the application attempts to validate crafted URIs.

A Regular Expression Denial of Service (ReDOS) vulnerability was discovered in Mpmath v1.0.0 through v1.2.1 when the mpmathify function is called.

The LevelOne WBR-6012 router with firmware R0.40e6 is vulnerable to improper resource allocation within its web application, where a series of crafted HTTP requests can cause a reboot. This could lead to network service interruptions.

Mintty before 3.4.5 allows remote servers to cause a denial of service (Windows GUI hang) by telling the Mintty window to change its title repeatedly at high speed, which results in many SetWindowTextA or SetWindowTextW calls. In other words, it does not implement a usleep or similar delay upon processing a title change.

An Allocation of Resources Without Limits or Throttling vulnerability in Cesanta Frozen versions less than 1.7 allows an attacker to induce a crash of the component embedding the library by supplying a maliciously crafted JSON as input.

Denial of service condition in M-Files Server in versions before 25.1.14445.5 allows an unauthenticated user to consume computing resources in certain conditions.

A vulnerability has been identified in SIMATIC HMI Comfort Outdoor Panels V15 7\" & 15\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Outdoor Panels V16 7\" & 15\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI Comfort Panels V15 4\" - 22\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Panels V16 4\" - 22\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI KTP Mobile Panels V15 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Update 6), SIMATIC HMI KTP Mobile Panels V16 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V16 Update 4), SIMATIC WinCC Runtime Advanced V15 (All versions < V15.1 Update 6), SIMATIC WinCC Runtime Advanced V16 (All versions < V16 Update 4), SINAMICS GH150 (All versions), SINAMICS GL150 (with option X30) (All versions), SINAMICS GM150 (with option X30) (All versions), SINAMICS SH150 (All versions), SINAMICS SL150 (All versions), SINAMICS SM120 (All versions), SINAMICS SM150 (All versions), SINAMICS SM150i (All versions). SmartVNC has a heap allocation leak vulnerability in the server Tight encoder, which could result in a Denial-of-Service condition.

In doInBackground of NotificationContentInflater.java, there is a possible temporary denial or service due to long running operations. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12 Android-12L Android-13Android ID: A-252766417

basic-ftp is an FTP client for Node.js. Prior to 5.3.1, basic-ftp is vulnerable to client-side denial of service when parsing FTP control-channel multiline responses. A malicious or compromised FTP server can send an unterminated multiline response during the initial FTP banner phase, before authentication. The client keeps appending attacker-controlled data into FtpContext._partialResponse and repeatedly reparses the accumulated buffer without enforcing a maximum control response size. As a result, an application using basic-ftp can remain stuck in connect() while memory and CPU usage grow under attacker-controlled input. This can lead to process-level denial of service, container OOM kills, worker restarts, queue backlog, or service degradation in applications that automatically connect to FTP endpoints. This vulnerability is fixed in 5.3.1.

Rack is a modular Ruby web server interface. Prior to versions 2.2.23, 3.1.21, and 3.2.6, Rack::Multipart::Parser only wraps the request body in a BoundedIO when CONTENT_LENGTH is present. When a multipart/form-data request is sent without a Content-Length header, such as with HTTP chunked transfer encoding, multipart parsing continues until end-of-stream with no total size limit. For file parts, the uploaded body is written directly to a temporary file on disk rather than being constrained by the buffered in-memory upload limit. An unauthenticated attacker can therefore stream an arbitrarily large multipart file upload and consume unbounded disk space. This results in a denial of service condition for Rack applications that accept multipart form data. This issue has been patched in versions 2.2.23, 3.1.21, and 3.2.6.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 13.12 to 18.2.8, 18.3 to 18.3.4, and 18.4 to 18.4.2 that could make the GitLab instance unresponsive or severely degraded by sending crafted GraphQL queries requesting large repository blobs.

An issue has been discovered in GitLab CE/EE affecting all versions before 17.10.7, 17.11 before 17.11.3, and 18.0 before 18.0.1. This could allow an authenticated attacker to cause a denial of service condition by exhausting server resources.

An issue has been discovered affecting service availability via issue preview in GitLab CE/EE affecting all versions from 16.7 before 17.9.7, 17.10 before 17.10.5, and 17.11 before 17.11.1.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 10.0 before 18.7.6, 18.8 before 18.8.6, and 18.9 before 18.9.2 that could have allowed an unauthenticated user to cause a denial of service by issuing specially crafted requests to repository archive endpoints under certain conditions.

All versions of package freeopcua/freeopcua are vulnerable to Denial of Service (DoS) when bypassing the limitations for excessive memory consumption by sending multiple CloseSession requests with the deleteSubscription parameter equal to False.

A vulnerability has been discovered in Citrix ADC (formerly known as NetScaler ADC) and Citrix Gateway (formerly known as NetScaler Gateway), and Citrix SD-WAN WANOP Edition models 4000-WO, 4100-WO, 5000-WO, and 5100-WO. These vulnerabilities, if exploited, could lead to the limited available disk space on the appliances being fully consumed.

Possible NLDAP Denial of Service attack Vulnerability in eDirectory has been discovered in OpenText™ eDirectory before 9.2.4.0000.

On version 15.1.x before 15.1.3, 14.1.x before 14.1.3.1, and 13.1.x before 13.1.3.6, when the brute force protection feature of BIG-IP Advanced WAF or BIG-IP ASM is enabled on a virtual server and the virtual server is under brute force attack, the MySQL database may run out of disk space due to lack of row limit on undisclosed tables in the MYSQL database. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

An issue was discovered in GitLab CE/EE affecting all versions starting from 13.6 prior to 17.2.9, starting from 17.3 prior to 17.3.5, and starting from 17.4 prior to 17.4.2, where viewing diffs of MR with conflicts can be slow.

An issue has been discovered in GitLab CE/EE affecting all versions starting from 17.1 prior to 17.9.8, from 17.10 prior to 17.10.6, and from 17.11 prior to 17.11.2. It was possible to cause a DoS condition via GitHub import requests using a malicious crafted payload.

All versions of package asneg/opcuastack are vulnerable to Denial of Service (DoS) due to a missing limitation on the number of received chunks - per single session or in total for all concurrent sessions. An attacker can exploit this vulnerability by sending an unlimited number of huge chunks (e.g. 2GB each) without sending the Final closing chunk.

A vulnerability in the file upload process of gradio-app/gradio version @gradio/video@0.10.2 allows for a Denial of Service (DoS) attack. An attacker can append a large number of characters to the end of a multipart boundary, causing the system to continuously process each character and issue warnings. This can render Gradio inaccessible for extended periods, disrupting services and causing significant downtime.

There is a resource management error vulnerability in eCNS280_TD V100R005C10SPC650. An attacker needs to perform specific operations to exploit the vulnerability on the affected device. Due to improper resource management of the function, the vulnerability can be exploited to cause service abnormal on affected devices.

pgjdbc is an open source postgresql JDBC Driver. From version 42.2.0 to before version 42.7.11, pgjdbc is vulnerable to a client-side denial of service during SCRAM-SHA-256 authentication. A malicious server can instruct the driver to perform SCRAM authentication with a very large iteration count. With a large enough value, the client spends an unbounded amount of CPU time inside PBKDF2 before authentication can fail. A single attempt ties up a CPU core. Repeated or concurrent attempts exhaust client CPU and can wedge connection pools. In affected versions, loginTimeout did not fully mitigate this problem. When loginTimeout expired, the caller could stop waiting, but the worker thread performing the connection attempt could continue running and burning CPU inside the SCRAM PBKDF2 computation. This issue has been patched in version 42.7.11.