In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix deletion race condition System crash when using debug kernel due to link list corruption. The cause of the link list corruption is due to session deletion was allowed to queue up twice. Here's the internal trace that show the same port was allowed to double queue for deletion on different cpu. 20808683956 015 qla2xxx [0000:13:00.1]-e801:4: Scheduling sess ffff93ebf9306800 for deletion 50:06:0e:80:12:48:ff:50 fc4_type 1 20808683957 027 qla2xxx [0000:13:00.1]-e801:4: Scheduling sess ffff93ebf9306800 for deletion 50:06:0e:80:12:48:ff:50 fc4_type 1 Move the clearing/setting of deleted flag lock.

In the Linux kernel, the following vulnerability has been resolved: l2tp: close all race conditions in l2tp_tunnel_register() The code in l2tp_tunnel_register() is racy in several ways: 1. It modifies the tunnel socket _after_ publishing it. 2. It calls setup_udp_tunnel_sock() on an existing socket without locking. 3. It changes sock lock class on fly, which triggers many syzbot reports. This patch amends all of them by moving socket initialization code before publishing and under sock lock. As suggested by Jakub, the l2tp lockdep class is not necessary as we can just switch to bh_lock_sock_nested().

In the Linux kernel, the following vulnerability has been resolved: spi: Fix null dereference on suspend A race condition exists where a synchronous (noqueue) transfer can be active during a system suspend. This can cause a null pointer dereference exception to occur when the system resumes. Example order of events leading to the exception: 1. spi_sync() calls __spi_transfer_message_noqueue() which sets ctlr->cur_msg 2. Spi transfer begins via spi_transfer_one_message() 3. System is suspended interrupting the transfer context 4. System is resumed 6. spi_controller_resume() calls spi_start_queue() which resets cur_msg to NULL 7. Spi transfer context resumes and spi_finalize_current_message() is called which dereferences cur_msg (which is now NULL) Wait for synchronous transfers to complete before suspending by acquiring the bus mutex and setting/checking a suspend flag.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix potential data race in rxrpc_wait_to_be_connected() Inside the loop in rxrpc_wait_to_be_connected() it checks call->error to see if it should exit the loop without first checking the call state. This is probably safe as if call->error is set, the call is dead anyway, but we should probably wait for the call state to have been set to completion first, lest it cause surprise on the way out. Fix this by only accessing call->error if the call is complete. We don't actually need to access the error inside the loop as we'll do that after. This caused the following report: BUG: KCSAN: data-race in rxrpc_send_data / rxrpc_set_call_completion write to 0xffff888159cf3c50 of 4 bytes by task 25673 on cpu 1: rxrpc_set_call_completion+0x71/0x1c0 net/rxrpc/call_state.c:22 rxrpc_send_data_packet+0xba9/0x1650 net/rxrpc/output.c:479 rxrpc_transmit_one+0x1e/0x130 net/rxrpc/output.c:714 rxrpc_decant_prepared_tx net/rxrpc/call_event.c:326 [inline] rxrpc_transmit_some_data+0x496/0x600 net/rxrpc/call_event.c:350 rxrpc_input_call_event+0x564/0x1220 net/rxrpc/call_event.c:464 rxrpc_io_thread+0x307/0x1d80 net/rxrpc/io_thread.c:461 kthread+0x1ac/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 read to 0xffff888159cf3c50 of 4 bytes by task 25672 on cpu 0: rxrpc_send_data+0x29e/0x1950 net/rxrpc/sendmsg.c:296 rxrpc_do_sendmsg+0xb7a/0xc20 net/rxrpc/sendmsg.c:726 rxrpc_sendmsg+0x413/0x520 net/rxrpc/af_rxrpc.c:565 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x375/0x4c0 net/socket.c:2501 ___sys_sendmsg net/socket.c:2555 [inline] __sys_sendmmsg+0x263/0x500 net/socket.c:2641 __do_sys_sendmmsg net/socket.c:2670 [inline] __se_sys_sendmmsg net/socket.c:2667 [inline] __x64_sys_sendmmsg+0x57/0x60 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00000000 -> 0xffffffea

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix hci_suspend_sync crash If hci_unregister_dev() frees the hci_dev object but hci_suspend_notifier may still be accessing it, it can cause the program to crash. Here's the call trace: <4>[102152.653246] Call Trace: <4>[102152.653254] hci_suspend_sync+0x109/0x301 [bluetooth] <4>[102152.653259] hci_suspend_dev+0x78/0xcd [bluetooth] <4>[102152.653263] hci_suspend_notifier+0x42/0x7a [bluetooth] <4>[102152.653268] notifier_call_chain+0x43/0x6b <4>[102152.653271] __blocking_notifier_call_chain+0x48/0x69 <4>[102152.653273] __pm_notifier_call_chain+0x22/0x39 <4>[102152.653276] pm_suspend+0x287/0x57c <4>[102152.653278] state_store+0xae/0xe5 <4>[102152.653281] kernfs_fop_write+0x109/0x173 <4>[102152.653284] __vfs_write+0x16f/0x1a2 <4>[102152.653287] ? selinux_file_permission+0xca/0x16f <4>[102152.653289] ? security_file_permission+0x36/0x109 <4>[102152.653291] vfs_write+0x114/0x21d <4>[102152.653293] __x64_sys_write+0x7b/0xdb <4>[102152.653296] do_syscall_64+0x59/0x194 <4>[102152.653299] entry_SYSCALL_64_after_hwframe+0x5c/0xc1 This patch holds the reference count of the hci_dev object while processing it in hci_suspend_notifier to avoid potential crash caused by the race condition.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix racing issue between ufshcd_mcq_abort() and ISR If command timeout happens and cq complete IRQ is raised at the same time, ufshcd_mcq_abort clears lprb->cmd and a NULL pointer deref happens in the ISR. Error log: ufshcd_abort: Device abort task at tag 18 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 pc : [0xffffffe27ef867ac] scsi_dma_unmap+0xc/0x44 lr : [0xffffffe27f1b898c] ufshcd_release_scsi_cmd+0x24/0x114

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Check mailbox/SMT channel for consistency On reception of a completion interrupt the shared memory area is accessed to retrieve the message header at first and then, if the message sequence number identifies a transaction which is still pending, the related payload is fetched too. When an SCMI command times out the channel ownership remains with the platform until eventually a late reply is received and, as a consequence, any further transmission attempt remains pending, waiting for the channel to be relinquished by the platform. Once that late reply is received the channel ownership is given back to the agent and any pending request is then allowed to proceed and overwrite the SMT area of the just delivered late reply; then the wait for the reply to the new request starts. It has been observed that the spurious IRQ related to the late reply can be wrongly associated with the freshly enqueued request: when that happens the SCMI stack in-flight lookup procedure is fooled by the fact that the message header now present in the SMT area is related to the new pending transaction, even though the real reply has still to arrive. This race-condition on the A2P channel can be detected by looking at the channel status bits: a genuine reply from the platform will have set the channel free bit before triggering the completion IRQ. Add a consistency check to validate such condition in the A2P ISR.

A flaw was found in the subsequent get_user_pages_fast in the Linux kernel’s interface for symmetric key cipher algorithms in the skcipher_recvmsg of crypto/algif_skcipher.c function. This flaw allows a local user to crash the system.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix race on port output assume the following setup on a single machine: 1. An openvswitch instance with one bridge and default flows 2. two network namespaces "server" and "client" 3. two ovs interfaces "server" and "client" on the bridge 4. for each ovs interface a veth pair with a matching name and 32 rx and tx queues 5. move the ends of the veth pairs to the respective network namespaces 6. assign ip addresses to each of the veth ends in the namespaces (needs to be the same subnet) 7. start some http server on the server network namespace 8. test if a client in the client namespace can reach the http server when following the actions below the host has a chance of getting a cpu stuck in a infinite loop: 1. send a large amount of parallel requests to the http server (around 3000 curls should work) 2. in parallel delete the network namespace (do not delete interfaces or stop the server, just kill the namespace) there is a low chance that this will cause the below kernel cpu stuck message. If this does not happen just retry. Below there is also the output of bpftrace for the functions mentioned in the output. The series of events happening here is: 1. the network namespace is deleted calling `unregister_netdevice_many_notify` somewhere in the process 2. this sets first `NETREG_UNREGISTERING` on both ends of the veth and then runs `synchronize_net` 3. it then calls `call_netdevice_notifiers` with `NETDEV_UNREGISTER` 4. this is then handled by `dp_device_event` which calls `ovs_netdev_detach_dev` (if a vport is found, which is the case for the veth interface attached to ovs) 5. this removes the rx_handlers of the device but does not prevent packages to be sent to the device 6. `dp_device_event` then queues the vport deletion to work in background as a ovs_lock is needed that we do not hold in the unregistration path 7. `unregister_netdevice_many_notify` continues to call `netdev_unregister_kobject` which sets `real_num_tx_queues` to 0 8. port deletion continues (but details are not relevant for this issue) 9. at some future point the background task deletes the vport If after 7. but before 9. a packet is send to the ovs vport (which is not deleted at this point in time) which forwards it to the `dev_queue_xmit` flow even though the device is unregistering. In `skb_tx_hash` (which is called in the `dev_queue_xmit`) path there is a while loop (if the packet has a rx_queue recorded) that is infinite if `dev->real_num_tx_queues` is zero. To prevent this from happening we update `do_output` to handle devices without carrier the same as if the device is not found (which would be the code path after 9. is done). Additionally we now produce a warning in `skb_tx_hash` if we will hit the infinite loop. bpftrace (first word is function name): __dev_queue_xmit server: real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1 netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1 dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 2, reg_state: 1 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 6, reg_state: 2 ovs_netdev_detach_dev server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, reg_state: 2 netdev_rx_handler_unregister server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 netdev_rx_handler_unregister ret server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2 dp_ ---truncated---

Race condition in the ext4_file_write_iter function in fs/ext4/file.c in the Linux kernel through 3.17 allows local users to cause a denial of service (file unavailability) via a combination of a write action and an F_SETFL fcntl operation for the O_DIRECT flag.

In the Linux kernel, the following vulnerability has been resolved: media: ti: j721e-csi2rx: Fix races while restarting DMA After the frame is submitted to DMA, it may happen that the submitted list is not updated soon enough, and the DMA callback is triggered before that. This can lead to kernel crashes, so move everything in a single lock/unlock section to prevent such races.

An issue was discovered in the Linux kernel through 6.5.9. During a race with SQ thread exit, an io_uring/fdinfo.c io_uring_show_fdinfo NULL pointer dereference can occur.

An issue was discovered in the Linux kernel 4.18 through 5.6.11 when unprivileged user namespaces are allowed. A user can create their own PID namespace, and mount a FUSE filesystem. Upon interaction with this FUSE filesystem, if the userspace component is terminated via a kill of the PID namespace's pid 1, it will result in a hung task, and resources being permanently locked up until system reboot. This can result in resource exhaustion.

Multiple memory leaks in the iwl_pcie_ctxt_info_gen3_init() function in drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c in the Linux kernel through 5.3.11 allow attackers to cause a denial of service (memory consumption) by triggering iwl_pcie_init_fw_sec() or dma_alloc_coherent() failures, aka CID-0f4f199443fa.

In the Linux kernel, the following vulnerability has been resolved: i2c: sprd: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in sprd_i2c_master_xfer() and sprd_i2c_remove(). However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced.

In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in crush_decode() A message of type CEPH_MSG_OSD_MAP containing a crush map with at least one bucket has two fields holding the bucket algorithm. If the values in these two fields differ, an out-of-bounds access can occur. This is the case because the first algorithm field (alg) is used to allocate the correct amount of memory for a bucket of this type, while the second algorithm field inside the bucket (b->alg) is used in the subsequent processing. This patch fixes the issue by adding a check that compares alg and b->alg and aborts the processing in case they differ. Furthermore, b->alg is set to 0 in this case, because the destruction of the crush map also uses this field to determine the bucket type, which can again result in an out-of-bounds access when trying to free the memory pointed to by the fields of the bucket. To correctly free the memory allocated for the bucket in such a case, the corresponding call to kfree is moved from the algorithm-specific crush_destroy_bucket functions to the generic crush_destroy_bucket().

In the Linux kernel, the following vulnerability has been resolved: net: Fix TOCTOU issue in sk_is_readable() sk->sk_prot->sock_is_readable is a valid function pointer when sk resides in a sockmap. After the last sk_psock_put() (which usually happens when socket is removed from sockmap), sk->sk_prot gets restored and sk->sk_prot->sock_is_readable becomes NULL. This makes sk_is_readable() racy, if the value of sk->sk_prot is reloaded after the initial check. Which in turn may lead to a null pointer dereference. Ensure the function pointer does not turn NULL after the check.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (ftsteutates) Fix TOCTOU race in fts_read() In the fts_read() function, when handling hwmon_pwm_auto_channels_temp, the code accesses the shared variable data->fan_source[channel] twice without holding any locks. It is first checked against FTS_FAN_SOURCE_INVALID, and if the check passes, it is read again when used as an argument to the BIT() macro. This creates a Time-of-Check to Time-of-Use (TOCTOU) race condition. Another thread executing fts_update_device() can modify the value of data->fan_source[channel] between the check and its use. If the value is changed to FTS_FAN_SOURCE_INVALID (0xff) during this window, the BIT() macro will be called with a large shift value (BIT(255)). A bit shift by a value greater than or equal to the type width is undefined behavior and can lead to a crash or incorrect values being returned to userspace. Fix this by reading data->fan_source[channel] into a local variable once, eliminating the race condition. Additionally, add a bounds check to ensure the value is less than BITS_PER_LONG before passing it to the BIT() macro, making the code more robust against undefined behavior. This possible bug was found by an experimental static analysis tool developed by our team.

In the Linux kernel, the following vulnerability has been resolved: vsock: Fix transport_* TOCTOU Transport assignment may race with module unload. Protect new_transport from becoming a stale pointer. This also takes care of an insecure call in vsock_use_local_transport(); add a lockdep assert. BUG: unable to handle page fault for address: fffffbfff8056000 Oops: Oops: 0000 [#1] SMP KASAN RIP: 0010:vsock_assign_transport+0x366/0x600 Call Trace: vsock_connect+0x59c/0xc40 __sys_connect+0xe8/0x100 __x64_sys_connect+0x6e/0xc0 do_syscall_64+0x92/0x1c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53

In the Linux kernel, the following vulnerability has been resolved: bpf: Require frozen map for calculating map hash Currently, bpf_map_get_info_by_fd calculates and caches the hash of the map regardless of the map's frozen state. This leads to a TOCTOU bug where userspace can call BPF_OBJ_GET_INFO_BY_FD to cache the hash and then modify the map contents before freezing. Therefore, a trusted loader can be tricked into verifying the stale hash while loading the modified contents. Fix this by returning -EPERM if the map is not frozen when the hash is requested. This ensures the hash is only generated for the final, immutable state of the map.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix btrfs_ioctl_space_info() slot_count TOCTOU which can lead to info-leak btrfs_ioctl_space_info() has a TOCTOU race between two passes over the block group RAID type lists. The first pass counts entries to determine the allocation size, then the second pass fills the buffer. The groups_sem rwlock is released between passes, allowing concurrent block group removal to reduce the entry count. When the second pass fills fewer entries than the first pass counted, copy_to_user() copies the full alloc_size bytes including trailing uninitialized kmalloc bytes to userspace. Fix by copying only total_spaces entries (the actually-filled count from the second pass) instead of alloc_size bytes, and switch to kzalloc so any future copy size mismatch cannot leak heap data.

In the Linux kernel, the following vulnerability has been resolved: drm/sched: Increment job count before swapping tail spsc queue A small race exists between spsc_queue_push and the run-job worker, in which spsc_queue_push may return not-first while the run-job worker has already idled due to the job count being zero. If this race occurs, job scheduling stops, leading to hangs while waiting on the job’s DMA fences. Seal this race by incrementing the job count before appending to the SPSC queue. This race was observed on a drm-tip 6.16-rc1 build with the Xe driver in an SVM test case.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix node_cnt race between extent node destroy and writeback f2fs_destroy_extent_node() does not set FI_NO_EXTENT before clearing extent nodes. When called from f2fs_drop_inode() with I_SYNC set, concurrent kworker writeback can insert new extent nodes into the same extent tree, racing with the destroy and triggering f2fs_bug_on() in __destroy_extent_node(). The scenario is as follows: drop inode writeback - iput - f2fs_drop_inode // I_SYNC set - f2fs_destroy_extent_node - __destroy_extent_node - while (node_cnt) { write_lock(&et->lock) __free_extent_tree write_unlock(&et->lock) - __writeback_single_inode - f2fs_outplace_write_data - f2fs_update_read_extent_cache - __update_extent_tree_range // FI_NO_EXTENT not set, // insert new extent node } // node_cnt == 0, exit while - f2fs_bug_on(node_cnt) // node_cnt > 0 Additionally, __update_extent_tree_range() only checks FI_NO_EXTENT for EX_READ type, leaving EX_BLOCK_AGE updates completely unprotected. This patch set FI_NO_EXTENT under et->lock in __destroy_extent_node(), consistent with other callers (__update_extent_tree_range and __drop_extent_tree) and check FI_NO_EXTENT for both EX_READ and EX_BLOCK_AGE tree.

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: ensure we're polling a polled queue A user can change the polled queue count at run time. There's a brief window during a reset where a hipri task may try to poll that queue before the block layer has updated the queue maps, which would race with the now interrupt driven queue and may cause double completions.

In the Linux kernel through 5.4.6, there is a NULL pointer dereference in drivers/scsi/libsas/sas_discover.c because of mishandling of port disconnection during discovery, related to a PHY down race condition, aka CID-f70267f379b5.

In the Linux kernel, the following vulnerability has been resolved: smb: client: make use of smbdirect_socket.recv_io.credits.available The logic off managing recv credits by counting posted recv_io and granted credits is racy. That's because the peer might already consumed a credit, but between receiving the incoming recv at the hardware and processing the completion in the 'recv_done' functions we likely have a window where we grant credits, which don't really exist. So we better have a decicated counter for the available credits, which will be incremented when we posted new recv buffers and drained when we grant the credits to the peer.

In the Linux kernel, the following vulnerability has been resolved: media: rainshadow-cec: fix TOCTOU race condition in rain_interrupt() In the interrupt handler rain_interrupt(), the buffer full check on rain->buf_len is performed before acquiring rain->buf_lock. This creates a Time-of-Check to Time-of-Use (TOCTOU) race condition, as rain->buf_len is concurrently accessed and modified in the work handler rain_irq_work_handler() under the same lock. Multiple interrupt invocations can race, with each reading buf_len before it becomes full and then proceeding. This can lead to both interrupts attempting to write to the buffer, incrementing buf_len beyond its capacity (DATA_SIZE) and causing a buffer overflow. Fix this bug by moving the spin_lock() to before the buffer full check. This ensures that the check and the subsequent buffer modification are performed atomically, preventing the race condition. An corresponding spin_unlock() is added to the overflow path to correctly release the lock. This possible bug was found by an experimental static analysis tool developed by our team.

Memory leaks in *create_resource_pool() functions under drivers/gpu/drm/amd/display/dc in the Linux kernel through 5.3.11 allow attackers to cause a denial of service (memory consumption). This affects the dce120_create_resource_pool() function in drivers/gpu/drm/amd/display/dc/dce120/dce120_resource.c, the dce110_create_resource_pool() function in drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c, the dce100_create_resource_pool() function in drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c, the dcn10_create_resource_pool() function in drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c, and the dce112_create_resource_pool() function in drivers/gpu/drm/amd/display/dc/dce112/dce112_resource.c, aka CID-104c307147ad.

A memory leak in the cx23888_ir_probe() function in drivers/media/pci/cx23885/cx23888-ir.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering kfifo_alloc() failures, aka CID-a7b2df76b42b.

In the Linux kernel, the following vulnerability has been resolved: vsock: Fix transport_{g2h,h2g} TOCTOU vsock_find_cid() and vsock_dev_do_ioctl() may race with module unload. transport_{g2h,h2g} may become NULL after the NULL check. Introduce vsock_transport_local_cid() to protect from a potential null-ptr-deref. KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] RIP: 0010:vsock_find_cid+0x47/0x90 Call Trace: __vsock_bind+0x4b2/0x720 vsock_bind+0x90/0xe0 __sys_bind+0x14d/0x1e0 __x64_sys_bind+0x6e/0xc0 do_syscall_64+0x92/0x1c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] RIP: 0010:vsock_dev_do_ioctl.isra.0+0x58/0xf0 Call Trace: __x64_sys_ioctl+0x12d/0x190 do_syscall_64+0x92/0x1c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53

Anaconda 3 2023.03-1-Linux allows local users to disrupt TLS certificate validation by modifying the cacert.pem file used by the installed pip program. This occurs because many files are installed as world-writable on Linux, ignoring umask, even when these files are installed as root. Miniconda is also affected.

Memory leaks in *clock_source_create() functions under drivers/gpu/drm/amd/display/dc in the Linux kernel before 5.3.8 allow attackers to cause a denial of service (memory consumption). This affects the dce112_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dce112/dce112_resource.c, the dce100_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c, the dcn10_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c, the dcn20_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c, the dce120_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dce120/dce120_resource.c, the dce110_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c, and the dce80_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c, aka CID-055e547478a1.

A memory leak in the bfad_im_get_stats() function in drivers/scsi/bfa/bfad_attr.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering bfa_port_get_stats() failures, aka CID-0e62395da2bd.

In the Linux kernel, the following vulnerability has been resolved: blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race We're seeing crashes from rq_qos_wake_function that look like this: BUG: unable to handle page fault for address: ffffafe180a40084 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40 Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00 RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084 RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011 R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002 R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> try_to_wake_up+0x5a/0x6a0 rq_qos_wake_function+0x71/0x80 __wake_up_common+0x75/0xa0 __wake_up+0x36/0x60 scale_up.part.0+0x50/0x110 wb_timer_fn+0x227/0x450 ... So rq_qos_wake_function() calls wake_up_process(data->task), which calls try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock). p comes from data->task, and data comes from the waitqueue entry, which is stored on the waiter's stack in rq_qos_wait(). Analyzing the core dump with drgn, I found that the waiter had already woken up and moved on to a completely unrelated code path, clobbering what was previously data->task. Meanwhile, the waker was passing the clobbered garbage in data->task to wake_up_process(), leading to the crash. What's happening is that in between rq_qos_wake_function() deleting the waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding that it already got a token and returning. The race looks like this: rq_qos_wait() rq_qos_wake_function() ============================================================== prepare_to_wait_exclusive() data->got_token = true; list_del_init(&curr->entry); if (data.got_token) break; finish_wait(&rqw->wait, &data.wq); ^- returns immediately because list_empty_careful(&wq_entry->entry) is true ... return, go do something else ... wake_up_process(data->task) (NO LONGER VALID!)-^ Normally, finish_wait() is supposed to synchronize against the waker. But, as noted above, it is returning immediately because the waitqueue entry has already been removed from the waitqueue. The bug is that rq_qos_wake_function() is accessing the waitqueue entry AFTER deleting it. Note that autoremove_wake_function() wakes the waiter and THEN deletes the waitqueue entry, which is the proper order. Fix it by swapping the order. We also need to use list_del_init_careful() to match the list_empty_careful() in finish_wait().

A memory leak in the alloc_sgtable() function in drivers/net/wireless/intel/iwlwifi/fw/dbg.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering alloc_page() failures, aka CID-b4b814fec1a5.

A flaw was found in the MCTP protocol in the Linux kernel. The function mctp_unregister() reclaims the device's relevant resource when a netcard detaches. However, a running routine may be unaware of this and cause the use-after-free of the mdev->addrs object, potentially leading to a denial of service.

A memory leak in the crypto_report() function in crypto/crypto_user_base.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering crypto_report_alg() failures, aka CID-ffdde5932042.

IBM Spectrum Protect 8.1.0.0 through 8.1.17.0 could allow a local user to cause a denial of service due to due to improper time-of-check to time-of-use functionality. IBM X-Force ID: 256012.

A memory leak in the sdma_init() function in drivers/infiniband/hw/hfi1/sdma.c in the Linux kernel before 5.3.9 allows attackers to cause a denial of service (memory consumption) by triggering rhashtable_init() failures, aka CID-34b3be18a04e. NOTE: This has been disputed as not a vulnerability because "rhashtable_init() can only fail if it is passed invalid values in the second parameter's struct, but when invoked from sdma_init() that is a pointer to a static const struct, so an attacker could only trigger failure if they could corrupt kernel memory (in which case a small memory leak is not a significant problem).

In the Linux kernel, the following vulnerability has been resolved: ice: Fix PTP NULL pointer dereference during VSI rebuild Fix race condition where PTP periodic work runs while VSI is being rebuilt, accessing NULL vsi->rx_rings. The sequence was: 1. ice_ptp_prepare_for_reset() cancels PTP work 2. ice_ptp_rebuild() immediately queues PTP work 3. VSI rebuild happens AFTER ice_ptp_rebuild() 4. PTP work runs and accesses NULL vsi->rx_rings Fix: Keep PTP work cancelled during rebuild, only queue it after VSI rebuild completes in ice_rebuild(). Added ice_ptp_queue_work() helper function to encapsulate the logic for queuing PTP work, ensuring it's only queued when PTP is supported and the state is ICE_PTP_READY. Error log: [ 121.392544] ice 0000:60:00.1: PTP reset successful [ 121.392692] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 121.392712] #PF: supervisor read access in kernel mode [ 121.392720] #PF: error_code(0x0000) - not-present page [ 121.392727] PGD 0 [ 121.392734] Oops: Oops: 0000 [#1] SMP NOPTI [ 121.392746] CPU: 8 UID: 0 PID: 1005 Comm: ice-ptp-0000:60 Tainted: G S 6.19.0-rc6+ #4 PREEMPT(voluntary) [ 121.392761] Tainted: [S]=CPU_OUT_OF_SPEC [ 121.392773] RIP: 0010:ice_ptp_update_cached_phctime+0xbf/0x150 [ice] [ 121.393042] Call Trace: [ 121.393047] <TASK> [ 121.393055] ice_ptp_periodic_work+0x69/0x180 [ice] [ 121.393202] kthread_worker_fn+0xa2/0x260 [ 121.393216] ? __pfx_ice_ptp_periodic_work+0x10/0x10 [ice] [ 121.393359] ? __pfx_kthread_worker_fn+0x10/0x10 [ 121.393371] kthread+0x10d/0x230 [ 121.393382] ? __pfx_kthread+0x10/0x10 [ 121.393393] ret_from_fork+0x273/0x2b0 [ 121.393407] ? __pfx_kthread+0x10/0x10 [ 121.393417] ret_from_fork_asm+0x1a/0x30 [ 121.393432] </TASK>

A NULL pointer dereference flaw was found in the Linux kernel's drivers/gpu/drm/msm/msm_gem_submit.c code in the submit_lookup_cmds function, which fails because it lacks a check of the return value of kmalloc(). This issue allows a local user to crash the system.

In the Linux kernel before 5.0, a memory leak exists in sit_init_net() in net/ipv6/sit.c when register_netdev() fails to register sitn->fb_tunnel_dev, which may cause denial of service, aka CID-07f12b26e21a.

An issue was discovered in the Linux kernel before 6.2.9. A use-after-free was found in bq24190_remove in drivers/power/supply/bq24190_charger.c. It could allow a local attacker to crash the system due to a race condition.

Race condition in Linux 2.6, when threads are sharing memory mapping via CLONE_VM (such as linuxthreads and vfork), might allow local users to cause a denial of service (deadlock) by triggering a core dump while waiting for a thread that has just performed an exec.

drivers/gpu/drm/radeon/radeon_display.c in the Linux kernel 5.2.14 does not check the alloc_workqueue return value, leading to a NULL pointer dereference. NOTE: A third-party software maintainer states that the work queue allocation is happening during device initialization, which for a graphics card occurs during boot. It is not attacker controllable and OOM at that time is highly unlikely

drivers/net/wireless/intel/iwlwifi/pcie/trans.c in the Linux kernel 5.2.14 does not check the alloc_workqueue return value, leading to a NULL pointer dereference.

In the Linux kernel before 5.1.13, there is a memory leak in drivers/scsi/libsas/sas_expander.c when SAS expander discovery fails. This will cause a BUG and denial of service.

In the Linux kernel, the following vulnerability has been resolved: smb: Initialize cfid->tcon before performing network ops Avoid leaking a tcon ref when a lease break races with opening the cached directory. Processing the leak break might take a reference to the tcon in cached_dir_lease_break() and then fail to release the ref in cached_dir_offload_close, since cfid->tcon is still NULL.

An issue was discovered in the Linux kernel before 5.0.6. There is a memory leak issue when idr_alloc() fails in genl_register_family() in net/netlink/genetlink.c.

In the Linux kernel, the following vulnerability has been resolved: fgraph: Add READ_ONCE() when accessing fgraph_array[] In __ftrace_return_to_handler(), a loop iterates over the fgraph_array[] elements, which are fgraph_ops. The loop checks if an element is a fgraph_stub to prevent using a fgraph_stub afterward. However, if the compiler reloads fgraph_array[] after this check, it might race with an update to fgraph_array[] that introduces a fgraph_stub. This could result in the stub being processed, but the stub contains a null "func_hash" field, leading to a NULL pointer dereference. To ensure that the gops compared against the fgraph_stub matches the gops processed later, add a READ_ONCE(). A similar patch appears in commit 63a8dfb ("function_graph: Add READ_ONCE() when accessing fgraph_array[]").