In the Linux kernel, the following vulnerability has been resolved: xfrm: account XFRMA_IF_ID in aevent size calculation xfrm_get_ae() allocates the reply skb with xfrm_aevent_msgsize(), then build_aevent() appends attributes including XFRMA_IF_ID when x->if_id is set. xfrm_aevent_msgsize() does not include space for XFRMA_IF_ID. For states with if_id, build_aevent() can fail with -EMSGSIZE and hit BUG_ON(err < 0) in xfrm_get_ae(), turning a malformed netlink interaction into a kernel panic. Account XFRMA_IF_ID in the size calculation unconditionally and replace the BUG_ON with normal error unwinding.

In the Linux kernel, the following vulnerability has been resolved: binfmt_elf_fdpic: fix AUXV size calculation when ELF_HWCAP2 is defined create_elf_fdpic_tables() does not correctly account the space for the AUX vector when an architecture has ELF_HWCAP2 defined. Prior to the commit 10e29251be0e ("binfmt_elf_fdpic: fix /proc/<pid>/auxv") it resulted in the last entry of the AUX vector being set to zero, but with that change it results in a kernel BUG. Fix that by adding one to the number of AUXV entries (nitems) when ELF_HWCAP2 is defined.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Fix Virtual Memory mapping boundaries calculation Calculating the size of the mapped area as the lesser value between the requested size and the actual size does not consider the partial mapping offset. This can cause page fault access. Fix the calculation of the starting and ending addresses, the total size is now deduced from the difference between the end and start addresses. Additionally, the calculations have been rewritten in a clearer and more understandable form. [Joonas: Add Requires: tag] Requires: 60a2066c5005 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset") (cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417)

A flaw was found in the Linux kernel before 5.9-rc4. A failure of the file system metadata validator in XFS can cause an inode with a valid, user-creatable extended attribute to be flagged as corrupt. This can lead to the filesystem being shutdown, or otherwise rendered inaccessible until it is remounted, leading to a denial of service. The highest threat from this vulnerability is to system availability.

In the Linux kernel, the following vulnerability has been resolved: l2tp: pass correct message length to ip6_append_data l2tp_ip6_sendmsg needs to avoid accounting for the transport header twice when splicing more data into an already partially-occupied skbuff. To manage this, we check whether the skbuff contains data using skb_queue_empty when deciding how much data to append using ip6_append_data. However, the code which performed the calculation was incorrect: ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0; ...due to C operator precedence, this ends up setting ulen to transhdrlen for messages with a non-zero length, which results in corrupted packets on the wire. Add parentheses to correct the calculation in line with the original intent.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/dsc: Fix the macro that calculates DSCC_/DSCA_ PPS reg address Commit bd077259d0a9 ("drm/i915/vdsc: Add function to read any PPS register") defines a new macro to calculate the DSC PPS register addresses with PPS number as an input. This macro correctly calculates the addresses till PPS 11 since the addresses increment by 4. So in that case the following macro works correctly to give correct register address: _MMIO(_DSCA_PPS_0 + (pps) * 4) However after PPS 11, the register address for PPS 12 increments by 12 because of RC Buffer memory allocation in between. Because of this discontinuity in the address space, the macro calculates wrong addresses for PPS 12 - 16 resulting into incorrect DSC PPS parameter value read/writes causing DSC corruption. This fixes it by correcting this macro to add the offset of 12 for PPS >=12. v3: Add correct paranthesis for pps argument (Jani Nikula) (cherry picked from commit 6074be620c31dc2ae11af96a1a5ea95580976fb5)

An out-of-bounds memory access flaw was found in the Linux kernel Intel’s iSMT SMBus host controller driver in the way a user triggers the I2C_SMBUS_BLOCK_DATA (with the ioctl I2C_SMBUS) with malicious input data. This flaw allows a local user to crash the system.

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: sof-nau8825: fix module alias overflow The maximum name length for a platform_device_id entry is 20 characters including the trailing NUL byte. The sof_nau8825.c file exceeds that, which causes an obscure error message: sound/soc/intel/boards/snd-soc-sof_nau8825.mod.c:35:45: error: illegal character encoding in string literal [-Werror,-Winvalid-source-encoding] MODULE_ALIAS("platform:adl_max98373_nau8825<U+0018><AA>"); ^~~~ include/linux/module.h:168:49: note: expanded from macro 'MODULE_ALIAS' ^~~~~~ include/linux/module.h:165:56: note: expanded from macro 'MODULE_INFO' ^~~~ include/linux/moduleparam.h:26:47: note: expanded from macro '__MODULE_INFO' = __MODULE_INFO_PREFIX __stringify(tag) "=" info I could not figure out how to make the module handling robust enough to handle this better, but as a quick fix, using slightly shorter names that are still unique avoids the build issue.

In the Linux kernel, the following vulnerability has been resolved: x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() Define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to ensure page tables are properly synchronized when calling p*d_populate_kernel(). For 5-level paging, synchronization is performed via pgd_populate_kernel(). In 4-level paging, pgd_populate() is a no-op, so synchronization is instead performed at the P4D level via p4d_populate_kernel(). This fixes intermittent boot failures on systems using 4-level paging and a large amount of persistent memory: BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: <TASK> __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] </TASK> It also fixes a crash in vmemmap_set_pmd() caused by accessing vmemmap before sync_global_pgds() [1]: BUG: unable to handle page fault for address: ffffeb3ff1200000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP NOPTI Tainted: [W]=WARN RIP: 0010:vmemmap_set_pmd+0xff/0x230 <TASK> vmemmap_populate_hugepages+0x176/0x180 vmemmap_populate+0x34/0x80 __populate_section_memmap+0x41/0x90 sparse_add_section+0x121/0x3e0 __add_pages+0xba/0x150 add_pages+0x1d/0x70 memremap_pages+0x3dc/0x810 devm_memremap_pages+0x1c/0x60 xe_devm_add+0x8b/0x100 [xe] xe_tile_init_noalloc+0x6a/0x70 [xe] xe_device_probe+0x48c/0x740 [xe] [... snip ...]

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix recursive locking in RPC handle list access Since commit 305853cce3794 ("ksmbd: Fix race condition in RPC handle list access"), ksmbd_session_rpc_method() attempts to lock sess->rpc_lock. This causes hung connections / tasks when a client attempts to open a named pipe. Using Samba's rpcclient tool: $ rpcclient //192.168.1.254 -U user%password $ rpcclient $> srvinfo <connection hung here> Kernel side: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/0:0 state:D stack:0 pid:5021 tgid:5021 ppid:2 flags:0x00200000 Workqueue: ksmbd-io handle_ksmbd_work Call trace: __schedule from schedule+0x3c/0x58 schedule from schedule_preempt_disabled+0xc/0x10 schedule_preempt_disabled from rwsem_down_read_slowpath+0x1b0/0x1d8 rwsem_down_read_slowpath from down_read+0x28/0x30 down_read from ksmbd_session_rpc_method+0x18/0x3c ksmbd_session_rpc_method from ksmbd_rpc_open+0x34/0x68 ksmbd_rpc_open from ksmbd_session_rpc_open+0x194/0x228 ksmbd_session_rpc_open from create_smb2_pipe+0x8c/0x2c8 create_smb2_pipe from smb2_open+0x10c/0x27ac smb2_open from handle_ksmbd_work+0x238/0x3dc handle_ksmbd_work from process_scheduled_works+0x160/0x25c process_scheduled_works from worker_thread+0x16c/0x1e8 worker_thread from kthread+0xa8/0xb8 kthread from ret_from_fork+0x14/0x38 Exception stack(0x8529ffb0 to 0x8529fff8) The task deadlocks because the lock is already held: ksmbd_session_rpc_open down_write(&sess->rpc_lock) ksmbd_rpc_open ksmbd_session_rpc_method down_read(&sess->rpc_lock) <-- deadlock Adjust ksmbd_session_rpc_method() callers to take the lock when necessary.

In the Linux kernel, the following vulnerability has been resolved: net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer Since commit 7d5e9737efda ("net: rfkill: gpio: get the name and type from device property") rfkill_find_type() gets called with the possibly uninitialized "const char *type_name;" local variable. On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752" acpi_device, the rfkill->type is set based on the ACPI acpi_device_id: rfkill->type = (unsigned)id->driver_data; and there is no "type" property so device_property_read_string() will fail and leave type_name uninitialized, leading to a potential crash. rfkill_find_type() does accept a NULL pointer, fix the potential crash by initializing type_name to NULL. Note likely sofar this has not been caught because: 1. Not many x86 machines actually have a "BCM4752"/"LNV4752" acpi_device 2. The stack happened to contain NULL where type_name is stored

In the Linux kernel, the following vulnerability has been resolved: net: dsa: don't leak tagger-owned storage on switch driver unbind In the initial commit dc452a471dba ("net: dsa: introduce tagger-owned storage for private and shared data"), we had a call to tag_ops->disconnect(dst) issued from dsa_tree_free(), which is called at tree teardown time. There were problems with connecting to a switch tree as a whole, so this got reworked to connecting to individual switches within the tree. In this process, tag_ops->disconnect(ds) was made to be called only from switch.c (cross-chip notifiers emitted as a result of dynamic tag proto changes), but the normal driver teardown code path wasn't replaced with anything. Solve this problem by adding a function that does the opposite of dsa_switch_setup_tag_protocol(), which is called from the equivalent spot in dsa_switch_teardown(). The positioning here also ensures that we won't have any use-after-free in tagging protocol (*rcv) ops, since the teardown sequence is as follows: dsa_tree_teardown -> dsa_tree_teardown_master -> dsa_master_teardown -> unsets master->dsa_ptr, making no further packets match the ETH_P_XDSA packet type handler -> dsa_tree_teardown_ports -> dsa_port_teardown -> dsa_slave_destroy -> unregisters DSA net devices, there is even a synchronize_net() in unregister_netdevice_many() -> dsa_tree_teardown_switches -> dsa_switch_teardown -> dsa_switch_teardown_tag_protocol -> finally frees the tagger-owned storage

In the Linux kernel, the following vulnerability has been resolved: drm: bridge: anx7625: Fix NULL pointer dereference with early IRQ If the interrupt occurs before resource initialization is complete, the interrupt handler/worker may access uninitialized data such as the I2C tcpc_client device, potentially leading to NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix one NULL pointer dereference in smc_ib_is_sg_need_sync() BUG: kernel NULL pointer dereference, address: 00000000000002ec PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 28 UID: 0 PID: 343 Comm: kworker/28:1 Kdump: loaded Tainted: G OE 6.17.0-rc2+ #9 NONE Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Workqueue: smc_hs_wq smc_listen_work [smc] RIP: 0010:smc_ib_is_sg_need_sync+0x9e/0xd0 [smc] ... Call Trace: <TASK> smcr_buf_map_link+0x211/0x2a0 [smc] __smc_buf_create+0x522/0x970 [smc] smc_buf_create+0x3a/0x110 [smc] smc_find_rdma_v2_device_serv+0x18f/0x240 [smc] ? smc_vlan_by_tcpsk+0x7e/0xe0 [smc] smc_listen_find_device+0x1dd/0x2b0 [smc] smc_listen_work+0x30f/0x580 [smc] process_one_work+0x18c/0x340 worker_thread+0x242/0x360 kthread+0xe7/0x220 ret_from_fork+0x13a/0x160 ret_from_fork_asm+0x1a/0x30 </TASK> If the software RoCE device is used, ibdev->dma_device is a null pointer. As a result, the problem occurs. Null pointer detection is added to prevent problems.

The VFS subsystem in the Linux kernel 3.x provides an incomplete set of requirements for setattr operations that underspecifies removing extended privilege attributes, which allows local users to cause a denial of service (capability stripping) via a failed invocation of a system call, as demonstrated by using chown to remove a capability from the ping or Wireshark dumpcap program.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/lru_sort: avoid divide-by-zero in damon_lru_sort_apply_parameters() Patch series "mm/damon: avoid divide-by-zero in DAMON module's parameters application". DAMON's RECLAIM and LRU_SORT modules perform no validation on user-configured parameters during application, which may lead to division-by-zero errors. Avoid the divide-by-zero by adding validation checks when DAMON modules attempt to apply the parameters. This patch (of 2): During the calculation of 'hot_thres' and 'cold_thres', either 'sample_interval' or 'aggr_interval' is used as the divisor, which may lead to division-by-zero errors. Fix it by directly returning -EINVAL when such a case occurs. Additionally, since 'aggr_interval' is already required to be set no smaller than 'sample_interval' in damon_set_attrs(), only the case where 'sample_interval' is zero needs to be checked.

In the Linux kernel before 4.20.14, expand_downwards in mm/mmap.c lacks a check for the mmap minimum address, which makes it easier for attackers to exploit kernel NULL pointer dereferences on non-SMAP platforms. This is related to a capability check for the wrong task.

In the Linux kernel, the following vulnerability has been resolved: net: xilinx: axienet: Add error handling for RX metadata pointer retrieval Add proper error checking for dmaengine_desc_get_metadata_ptr() which can return an error pointer and lead to potential crashes or undefined behaviour if the pointer retrieval fails. Properly handle the error by unmapping DMA buffer, freeing the skb and returning early to prevent further processing with invalid data.

In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: fix stack overrun when loading vlenb The userspace load can put up to 2048 bits into an xlen bit stack buffer. We want only xlen bits, so check the size beforehand.

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-core: care NULL dirver name on snd_soc_lookup_component_nolocked() soc-generic-dmaengine-pcm.c uses same dev for both CPU and Platform. In such case, CPU component driver might not have driver->name, then snd_soc_lookup_component_nolocked() will be NULL pointer access error. Care NULL driver name. Call trace: strcmp from snd_soc_lookup_component_nolocked+0x64/0xa4 snd_soc_lookup_component_nolocked from snd_soc_unregister_component_by_driver+0x2c/0x44 snd_soc_unregister_component_by_driver from snd_dmaengine_pcm_unregister+0x28/0x64 snd_dmaengine_pcm_unregister from devres_release_all+0x98/0xfc devres_release_all from device_unbind_cleanup+0xc/0x60 device_unbind_cleanup from really_probe+0x220/0x2c8 really_probe from __driver_probe_device+0x88/0x1a0 __driver_probe_device from driver_probe_device+0x30/0x110 driver_probe_device from __driver_attach+0x90/0x178 __driver_attach from bus_for_each_dev+0x7c/0xcc bus_for_each_dev from bus_add_driver+0xcc/0x1ec bus_add_driver from driver_register+0x80/0x11c driver_register from do_one_initcall+0x58/0x23c do_one_initcall from kernel_init_freeable+0x198/0x1f4 kernel_init_freeable from kernel_init+0x1c/0x12c kernel_init from ret_from_fork+0x14/0x28

In the Linux kernel, the following vulnerability has been resolved: net/tcp: Fix socket memory leak in TCP-AO failure handling for IPv6 When tcp_ao_copy_all_matching() fails in tcp_v6_syn_recv_sock() it just exits the function. This ends up causing a memory-leak: unreferenced object 0xffff0000281a8200 (size 2496): comm "softirq", pid 0, jiffies 4295174684 hex dump (first 32 bytes): 7f 00 00 06 7f 00 00 06 00 00 00 00 cb a8 88 13 ................ 0a 00 03 61 00 00 00 00 00 00 00 00 00 00 00 00 ...a............ backtrace (crc 5ebdbe15): kmemleak_alloc+0x44/0xe0 kmem_cache_alloc_noprof+0x248/0x470 sk_prot_alloc+0x48/0x120 sk_clone_lock+0x38/0x3b0 inet_csk_clone_lock+0x34/0x150 tcp_create_openreq_child+0x3c/0x4a8 tcp_v6_syn_recv_sock+0x1c0/0x620 tcp_check_req+0x588/0x790 tcp_v6_rcv+0x5d0/0xc18 ip6_protocol_deliver_rcu+0x2d8/0x4c0 ip6_input_finish+0x74/0x148 ip6_input+0x50/0x118 ip6_sublist_rcv+0x2fc/0x3b0 ipv6_list_rcv+0x114/0x170 __netif_receive_skb_list_core+0x16c/0x200 netif_receive_skb_list_internal+0x1f0/0x2d0 This is because in tcp_v6_syn_recv_sock (and the IPv4 counterpart), when exiting upon error, inet_csk_prepare_forced_close() and tcp_done() need to be called. They make sure the newsk will end up being correctly free'd. tcp_v4_syn_recv_sock() makes this very clear by having the put_and_exit label that takes care of things. So, this patch here makes sure tcp_v4_syn_recv_sock and tcp_v6_syn_recv_sock have similar error-handling and thus fixes the leak for TCP-AO.

In the Linux kernel, the following vulnerability has been resolved: mm/userfaultfd: fix kmap_local LIFO ordering for CONFIG_HIGHPTE With CONFIG_HIGHPTE on 32-bit ARM, move_pages_pte() maps PTE pages using kmap_local_page(), which requires unmapping in Last-In-First-Out order. The current code maps dst_pte first, then src_pte, but unmaps them in the same order (dst_pte, src_pte), violating the LIFO requirement. This causes the warning in kunmap_local_indexed(): WARNING: CPU: 0 PID: 604 at mm/highmem.c:622 kunmap_local_indexed+0x178/0x17c addr \!= __fix_to_virt(FIX_KMAP_BEGIN + idx) Fix this by reversing the unmap order to respect LIFO ordering. This issue follows the same pattern as similar fixes: - commit eca6828403b8 ("crypto: skcipher - fix mismatch between mapping and unmapping order") - commit 8cf57c6df818 ("nilfs2: eliminate staggered calls to kunmap in nilfs_rename") Both of which addressed the same fundamental requirement that kmap_local operations must follow LIFO ordering.

In the Linux kernel, the following vulnerability has been resolved: xfrm: xfrm_alloc_spi shouldn't use 0 as SPI x->id.spi == 0 means "no SPI assigned", but since commit 94f39804d891 ("xfrm: Duplicate SPI Handling"), we now create states and add them to the byspi list with this value. __xfrm_state_delete doesn't remove those states from the byspi list, since they shouldn't be there, and this shows up as a UAF the next time we go through the byspi list.

In the Linux kernel, the following vulnerability has been resolved: fs/smb: Fix inconsistent refcnt update A possible inconsistent update of refcount was identified in `smb2_compound_op`. Such inconsistent update could lead to possible resource leaks. Why it is a possible bug: 1. In the comment section of the function, it clearly states that the reference to `cfile` should be dropped after calling this function. 2. Every control flow path would check and drop the reference to `cfile`, except the patched one. 3. Existing callers would not handle refcount update of `cfile` if -ENOMEM is returned. To fix the bug, an extra goto label "out" is added, to make sure that the cleanup logic would always be respected. As the problem is caused by the allocation failure of `vars`, the cleanup logic between label "finished" and "out" can be safely ignored. According to the definition of function `is_replayable_error`, the error code of "-ENOMEM" is not recoverable. Therefore, the replay logic also gets ignored.

In the Linux kernel, the following vulnerability has been resolved: arm64: kexec: initialize kexec_buf struct in load_other_segments() Patch series "kexec: Fix invalid field access". The kexec_buf structure was previously declared without initialization. commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly") added a field that is always read but not consistently populated by all architectures. This un-initialized field will contain garbage. This is also triggering a UBSAN warning when the uninitialized data was accessed: ------------[ cut here ]------------ UBSAN: invalid-load in ./include/linux/kexec.h:210:10 load of value 252 is not a valid value for type '_Bool' Zero-initializing kexec_buf at declaration ensures all fields are cleanly set, preventing future instances of uninitialized memory being used. An initial fix was already landed for arm64[0], and this patchset fixes the problem on the remaining arm64 code and on riscv, as raised by Mark. Discussions about this problem could be found at[1][2]. This patch (of 3): The kexec_buf structure was previously declared without initialization. commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly") added a field that is always read but not consistently populated by all architectures. This un-initialized field will contain garbage. This is also triggering a UBSAN warning when the uninitialized data was accessed: ------------[ cut here ]------------ UBSAN: invalid-load in ./include/linux/kexec.h:210:10 load of value 252 is not a valid value for type '_Bool' Zero-initializing kexec_buf at declaration ensures all fields are cleanly set, preventing future instances of uninitialized memory being used.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: Remove WARN_ON for device endpoint command timeouts This commit addresses a rarely observed endpoint command timeout which causes kernel panic due to warn when 'panic_on_warn' is enabled and unnecessary call trace prints when 'panic_on_warn' is disabled. It is seen during fast software-controlled connect/disconnect testcases. The following is one such endpoint command timeout that we observed: 1. Connect ======= ->dwc3_thread_interrupt ->dwc3_ep0_interrupt ->configfs_composite_setup ->composite_setup ->usb_ep_queue ->dwc3_gadget_ep0_queue ->__dwc3_gadget_ep0_queue ->__dwc3_ep0_do_control_data ->dwc3_send_gadget_ep_cmd 2. Disconnect ========== ->dwc3_thread_interrupt ->dwc3_gadget_disconnect_interrupt ->dwc3_ep0_reset_state ->dwc3_ep0_end_control_data ->dwc3_send_gadget_ep_cmd In the issue scenario, in Exynos platforms, we observed that control transfers for the previous connect have not yet been completed and end transfer command sent as a part of the disconnect sequence and processing of USB_ENDPOINT_HALT feature request from the host timeout. This maybe an expected scenario since the controller is processing EP commands sent as a part of the previous connect. It maybe better to remove WARN_ON in all places where device endpoint commands are sent to avoid unnecessary kernel panic due to warn.

In the Linux kernel, the following vulnerability has been resolved: dm-stripe: fix a possible integer overflow There's a possible integer overflow in stripe_io_hints if we have too large chunk size. Test if the overflow happened, and if it did, don't set limits->io_min and limits->io_opt;

In the Linux kernel, the following vulnerability has been resolved: can: j1939: implement NETDEV_UNREGISTER notification handler syzbot is reporting unregister_netdevice: waiting for vcan0 to become free. Usage count = 2 problem, for j1939 protocol did not have NETDEV_UNREGISTER notification handler for undoing changes made by j1939_sk_bind(). Commit 25fe97cb7620 ("can: j1939: move j1939_priv_put() into sk_destruct callback") expects that a call to j1939_priv_put() can be unconditionally delayed until j1939_sk_sock_destruct() is called. But we need to call j1939_priv_put() against an extra ref held by j1939_sk_bind() call (as a part of undoing changes made by j1939_sk_bind()) as soon as NETDEV_UNREGISTER notification fires (i.e. before j1939_sk_sock_destruct() is called via j1939_sk_release()). Otherwise, the extra ref on "struct j1939_priv" held by j1939_sk_bind() call prevents "struct net_device" from dropping the usage count to 1; making it impossible for unregister_netdevice() to continue. [mkl: remove space in front of label]

In the Linux kernel, the following vulnerability has been resolved: x86/vmscape: Add conditional IBPB mitigation VMSCAPE is a vulnerability that exploits insufficient branch predictor isolation between a guest and a userspace hypervisor (like QEMU). Existing mitigations already protect kernel/KVM from a malicious guest. Userspace can additionally be protected by flushing the branch predictors after a VMexit. Since it is the userspace that consumes the poisoned branch predictors, conditionally issue an IBPB after a VMexit and before returning to userspace. Workloads that frequently switch between hypervisor and userspace will incur the most overhead from the new IBPB. This new IBPB is not integrated with the existing IBPB sites. For instance, a task can use the existing speculation control prctl() to get an IBPB at context switch time. With this implementation, the IBPB is doubled up: one at context switch and another before running userspace. The intent is to integrate and optimize these cases post-embargo. [ dhansen: elaborate on suboptimal IBPB solution ]

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: Check encryption key size on incoming connection This is required for passing GAP/SEC/SEM/BI-04-C PTS test case: Security Mode 4 Level 4, Responder - Invalid Encryption Key Size - 128 bit This tests the security key with size from 1 to 15 bytes while the Security Mode 4 Level 4 requests 16 bytes key size. Currently PTS fails with the following logs: - expected:Connection Response: Code: [3 (0x03)] Code Identifier: (lt)WildCard: Exists(gt) Length: [8 (0x0008)] Destination CID: (lt)WildCard: Exists(gt) Source CID: [64 (0x0040)] Result: [3 (0x0003)] Connection refused - Security block Status: (lt)WildCard: Exists(gt), but received:Connection Response: Code: [3 (0x03)] Code Identifier: [1 (0x01)] Length: [8 (0x0008)] Destination CID: [64 (0x0040)] Source CID: [64 (0x0040)] Result: [0 (0x0000)] Connection Successful Status: [0 (0x0000)] No further information available And HCI logs: < HCI Command: Read Encrypti.. (0x05|0x0008) plen 2 Handle: 14 Address: 00:1B:DC:F2:24:10 (Vencer Co., Ltd.) > HCI Event: Command Complete (0x0e) plen 7 Read Encryption Key Size (0x05|0x0008) ncmd 1 Status: Success (0x00) Handle: 14 Address: 00:1B:DC:F2:24:10 (Vencer Co., Ltd.) Key size: 7 > ACL Data RX: Handle 14 flags 0x02 dlen 12 L2CAP: Connection Request (0x02) ident 1 len 4 PSM: 4097 (0x1001) Source CID: 64 < ACL Data TX: Handle 14 flags 0x00 dlen 16 L2CAP: Connection Response (0x03) ident 1 len 8 Destination CID: 64 Source CID: 64 Result: Connection successful (0x0000) Status: No further information available (0x0000)

In the Linux kernel, the following vulnerability has been resolved: smb: client: let smbd_destroy() call disable_work_sync(&info->post_send_credits_work) In smbd_destroy() we may destroy the memory so we better wait until post_send_credits_work is no longer pending and will never be started again. I actually just hit the case using rxe: WARNING: CPU: 0 PID: 138 at drivers/infiniband/sw/rxe/rxe_verbs.c:1032 rxe_post_recv+0x1ee/0x480 [rdma_rxe] ... [ 5305.686979] [ T138] smbd_post_recv+0x445/0xc10 [cifs] [ 5305.687135] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687149] [ T138] ? __kasan_check_write+0x14/0x30 [ 5305.687185] [ T138] ? __pfx_smbd_post_recv+0x10/0x10 [cifs] [ 5305.687329] [ T138] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 5305.687356] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687368] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687378] [ T138] ? _raw_spin_unlock_irqrestore+0x11/0x60 [ 5305.687389] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687399] [ T138] ? get_receive_buffer+0x168/0x210 [cifs] [ 5305.687555] [ T138] smbd_post_send_credits+0x382/0x4b0 [cifs] [ 5305.687701] [ T138] ? __pfx_smbd_post_send_credits+0x10/0x10 [cifs] [ 5305.687855] [ T138] ? __pfx___schedule+0x10/0x10 [ 5305.687865] [ T138] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 5305.687875] [ T138] ? queue_delayed_work_on+0x8e/0xa0 [ 5305.687889] [ T138] process_one_work+0x629/0xf80 [ 5305.687908] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687917] [ T138] ? __kasan_check_write+0x14/0x30 [ 5305.687933] [ T138] worker_thread+0x87f/0x1570 ... It means rxe_post_recv was called after rdma_destroy_qp(). This happened because put_receive_buffer() was triggered by ib_drain_qp() and called: queue_work(info->workqueue, &info->post_send_credits_work);

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, Fix memory leak in hws_action_get_shared_stc_nic error flow When an invalid stc_type is provided, the function allocates memory for shared_stc but jumps to unlock_and_out without freeing it, causing a memory leak. Fix by jumping to free_shared_stc label instead to ensure proper cleanup.

In the Linux kernel, the following vulnerability has been resolved: qed: Don't collect too many protection override GRC elements In the protection override dump path, the firmware can return far too many GRC elements, resulting in attempting to write past the end of the previously-kmalloc'ed dump buffer. This will result in a kernel panic with reason: BUG: unable to handle kernel paging request at ADDRESS where "ADDRESS" is just past the end of the protection override dump buffer. The start address of the buffer is: p_hwfn->cdev->dbg_features[DBG_FEATURE_PROTECTION_OVERRIDE].dump_buf and the size of the buffer is buf_size in the same data structure. The panic can be arrived at from either the qede Ethernet driver path: [exception RIP: qed_grc_dump_addr_range+0x108] qed_protection_override_dump at ffffffffc02662ed [qed] qed_dbg_protection_override_dump at ffffffffc0267792 [qed] qed_dbg_feature at ffffffffc026aa8f [qed] qed_dbg_all_data at ffffffffc026b211 [qed] qed_fw_fatal_reporter_dump at ffffffffc027298a [qed] devlink_health_do_dump at ffffffff82497f61 devlink_health_report at ffffffff8249cf29 qed_report_fatal_error at ffffffffc0272baf [qed] qede_sp_task at ffffffffc045ed32 [qede] process_one_work at ffffffff81d19783 or the qedf storage driver path: [exception RIP: qed_grc_dump_addr_range+0x108] qed_protection_override_dump at ffffffffc068b2ed [qed] qed_dbg_protection_override_dump at ffffffffc068c792 [qed] qed_dbg_feature at ffffffffc068fa8f [qed] qed_dbg_all_data at ffffffffc0690211 [qed] qed_fw_fatal_reporter_dump at ffffffffc069798a [qed] devlink_health_do_dump at ffffffff8aa95e51 devlink_health_report at ffffffff8aa9ae19 qed_report_fatal_error at ffffffffc0697baf [qed] qed_hw_err_notify at ffffffffc06d32d7 [qed] qed_spq_post at ffffffffc06b1011 [qed] qed_fcoe_destroy_conn at ffffffffc06b2e91 [qed] qedf_cleanup_fcport at ffffffffc05e7597 [qedf] qedf_rport_event_handler at ffffffffc05e7bf7 [qedf] fc_rport_work at ffffffffc02da715 [libfc] process_one_work at ffffffff8a319663 Resolve this by clamping the firmware's return value to the maximum number of legal elements the firmware should return.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: qcom: bam_dma: Fix DT error handling for num-channels/ees When we don't have a clock specified in the device tree, we have no way to ensure the BAM is on. This is often the case for remotely-controlled or remotely-powered BAM instances. In this case, we need to read num-channels from the DT to have all the necessary information to complete probing. However, at the moment invalid device trees without clock and without num-channels still continue probing, because the error handling is missing return statements. The driver will then later try to read the number of channels from the registers. This is unsafe, because it relies on boot firmware and lucky timing to succeed. Unfortunately, the lack of proper error handling here has been abused for several Qualcomm SoCs upstream, causing early boot crashes in several situations [1, 2]. Avoid these early crashes by erroring out when any of the required DT properties are missing. Note that this will break some of the existing DTs upstream (mainly BAM instances related to the crypto engine). However, clearly these DTs have never been tested properly, since the error in the kernel log was just ignored. It's safer to disable the crypto engine for these broken DTBs. [1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/ [2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/

In the Linux kernel, the following vulnerability has been resolved: ppp: fix memory leak in pad_compress_skb If alloc_skb() fails in pad_compress_skb(), it returns NULL without releasing the old skb. The caller does: skb = pad_compress_skb(ppp, skb); if (!skb) goto drop; drop: kfree_skb(skb); When pad_compress_skb() returns NULL, the reference to the old skb is lost and kfree_skb(skb) ends up doing nothing, leading to a memory leak. Align pad_compress_skb() semantics with realloc(): only free the old skb if allocation and compression succeed. At the call site, use the new_skb variable so the original skb is not lost when pad_compress_skb() fails.

In the Linux kernel, the following vulnerability has been resolved: igb: Fix NULL pointer dereference in ethtool loopback test The igb driver currently causes a NULL pointer dereference when executing the ethtool loopback test. This occurs because there is no associated q_vector for the test ring when it is set up, as interrupts are typically not added to the test rings. Since commit 5ef44b3cb43b removed the napi_id assignment in __xdp_rxq_info_reg(), there is no longer a need to pass a napi_id to it. Therefore, simply use 0 as the last parameter.

In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Disable INVLPGB on Zen2 AMD Cyan Skillfish (Family 17h, Model 47h, Stepping 0h) has an issue that causes system oopses and panics when performing TLB flush using INVLPGB. However, the problem is that that machine has misconfigured CPUID and should not report the INVLPGB bit in the first place. So zap the kernel's representation of the flag so that nothing gets confused. [ bp: Massage. ]

In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: Clear the scratch_pt pointer on error Avoid triggering a dereference of an error pointer on cleanup in xe_vm_free_scratch() by clearing any scratch_pt error pointer. (cherry picked from commit 358ee50ab565f3c8ea32480e9d03127a81ba32f8)

In the Linux kernel, the following vulnerability has been resolved: net: fec: Fix possible NPD in fec_enet_phy_reset_after_clk_enable() The function of_phy_find_device may return NULL, so we need to take care before dereferencing phy_dev.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix invalid algorithm for encoded extents The current algorithm sanity checks do not properly apply to new encoded extents. Unify the algorithm check with Z_EROFS_COMPRESSION(_RUNTIME)_MAX and ensure consistency with sbi->available_compr_algs.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix smbdirect_recv_io leak in smbd_negotiate() error path During tests of another unrelated patch I was able to trigger this error: Objects remaining on __kmem_cache_shutdown()

In the Linux kernel, the following vulnerability has been resolved: eth: mlx4: Fix IS_ERR() vs NULL check bug in mlx4_en_create_rx_ring Replace NULL check with IS_ERR() check after calling page_pool_create() since this function returns error pointers (ERR_PTR). Using NULL check could lead to invalid pointer dereference.

net/unix/af_unix.c in the Linux kernel 2.6.31.4 and earlier allows local users to cause a denial of service (system hang) by creating an abstract-namespace AF_UNIX listening socket, performing a shutdown operation on this socket, and then performing a series of connect operations to this socket.

In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix NPD when refreshing an FDB entry with a nexthop object VXLAN FDB entries can point to either a remote destination or an FDB nexthop group. The latter is usually used in EVPN deployments where learning is disabled. However, when learning is enabled, an incoming packet might try to refresh an FDB entry that points to an FDB nexthop group and therefore does not have a remote. Such packets should be dropped, but they are only dropped after dereferencing the non-existent remote, resulting in a NPD [1] which can be reproduced using [2]. Fix by dropping such packets earlier. Remove the misleading comment from first_remote_rcu(). [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 361 Comm: mausezahn Not tainted 6.17.0-rc1-virtme-g9f6b606b6b37 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_snoop+0x98/0x1e0 [...] Call Trace: <TASK> vxlan_encap_bypass+0x209/0x240 encap_bypass_if_local+0xb1/0x100 vxlan_xmit_one+0x1375/0x17e0 vxlan_xmit+0x6b4/0x15f0 dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip address add 192.0.2.2/32 dev lo ip nexthop add id 1 via 192.0.2.3 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 12345 localbypass ip link add name vx1 up type vxlan id 10020 local 192.0.2.2 dstport 54321 learning bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 192.0.2.2 port 54321 vni 10020 bridge fdb add 00:aa:bb:cc:dd:ee dev vx1 self static nhid 10 mausezahn vx0 -a 00:aa:bb:cc:dd:ee -b 00:11:22:33:44:55 -c 1 -q

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Add a null ptr check for dpu_encoder_needs_modeset The drm_atomic_get_new_connector_state() can return NULL if the connector is not part of the atomic state. Add a check to prevent a NULL pointer dereference. This follows the same pattern used in dpu_encoder_update_topology() within the same file, which checks for NULL before using conn_state. Patchwork: https://patchwork.freedesktop.org/patch/665188/

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, Fix memory leak in hws_pool_buddy_init error path In the error path of hws_pool_buddy_init(), the buddy allocator cleanup doesn't free the allocator structure itself, causing a memory leak. Add the missing kfree() to properly release all allocated memory.

In the Linux kernel, the following vulnerability has been resolved: spi: cadence-quadspi: Implement refcount to handle unbind during busy driver support indirect read and indirect write operation with assumption no force device removal(unbind) operation. However force device removal(removal) is still available to root superuser. Unbinding driver during operation causes kernel crash. This changes ensure driver able to handle such operation for indirect read and indirect write by implementing refcount to track attached devices to the controller and gracefully wait and until attached devices remove operation completed before proceed with removal operation.

In the Linux kernel, the following vulnerability has been resolved: media: vidtv: fix nfeeds state corruption on start_streaming failure syzbot reported a memory leak in vidtv_psi_service_desc_init [1]. When vidtv_start_streaming() fails inside vidtv_start_feed(), the nfeeds counter is left incremented even though no feed was actually started. This corrupts the driver state: subsequent start_feed calls see nfeeds > 1 and skip starting the mux, while stop_feed calls eventually try to stop a non-existent stream. This state corruption can also lead to memory leaks, since the mux and channel resources may be partially allocated during a failed start_streaming but never cleaned up, as the stop path finds dvb->streaming == false and returns early. Fix by decrementing nfeeds back when start_streaming fails, keeping the counter in sync with the actual number of active feeds. [1] BUG: memory leak unreferenced object 0xffff888145b50820 (size 32): comm "syz.0.17", pid 6068, jiffies 4294944486 backtrace (crc 90a0c7d4): vidtv_psi_service_desc_init+0x74/0x1b0 drivers/media/test-drivers/vidtv/vidtv_psi.c:288 vidtv_channel_s302m_init+0xb1/0x2a0 drivers/media/test-drivers/vidtv/vidtv_channel.c:83 vidtv_channels_init+0x1b/0x40 drivers/media/test-drivers/vidtv/vidtv_channel.c:524 vidtv_mux_init+0x516/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:518 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 [inline] vidtv_start_feed+0x33e/0x4d0 drivers/media/test-drivers/vidtv/vidtv_bridge.c:239

In the Linux kernel, the following vulnerability has been resolved: clk: sunxi-ng: mp: Fix dual-divider clock rate readback When dual-divider clock support was introduced, the P divider offset was left out of the .recalc_rate readback function. This causes the clock rate to become bogus or even zero (possibly due to the P divider being 1, leading to a divide-by-zero). Fix this by incorporating the P divider offset into the calculation.

In the Linux kernel, the following vulnerability has been resolved: md/raid10: wait barrier before returning discard request with REQ_NOWAIT raid10_handle_discard should wait barrier before returning a discard bio which has REQ_NOWAIT. And there is no need to print warning calltrace if a discard bio has REQ_NOWAIT flag. Quality engineer usually checks dmesg and reports error if dmesg has warning/error calltrace.