In NocoDB, versions 0.9 to 0.83.8 are vulnerable to Observable Discrepancy in the password-reset feature. When requesting a password reset for a given email address, the application displays an error message when the email isn't registered within the system. This allows attackers to enumerate the registered users' email addresses.

Umbraco is an ASP.NET content management system. Umbraco 10 prior to 10.8.4 with access to the native login screen is vulnerable to a possible user enumeration attack. This issue was fixed in version 10.8.5. As a workaround, one may disable the native login screen by exclusively using external logins.

A vulnerability in the TLS handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain access to sensitive information. This vulnerability is due to improper implementation of countermeasures against a Bleichenbacher attack on a device that uses SSL decryption policies. An attacker could exploit this vulnerability by sending crafted TLS messages to an affected device, which would act as an oracle and allow the attacker to carry out a chosen-ciphertext attack. A successful exploit could allow the attacker to perform cryptanalytic operations that may allow decryption of previously captured TLS sessions to the affected device.

Flask-AppBuilder is an application development framework, built on top of the Flask web framework. In affected versions there exists a user enumeration vulnerability. This vulnerability allows for a non authenticated user to enumerate existing accounts by timing the response time from the server when you are logging in. Users are advised to upgrade to version 3.4.4 as soon as possible. There are no known workarounds for this issue.

A vulnerability in Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection could allow an unauthenticated, remote attacker to perform a timing attack. This vulnerability is due to insufficient protection of a system password. An attacker could exploit this vulnerability by observing the time it takes the system to respond to various queries. A successful exploit could allow the attacker to determine a sensitive system password.

Liferay Portal 7.2.0 through 7.4.1, and older unsupported versions, and Liferay DXP 7.3 before service pack 3, 7.2 before fix pack 18, and older unsupported versions returns with different responses depending on whether a site does not exist or if the user does not have permission to access the site, which allows remote attackers to discover the existence of sites by enumerating URLs. This vulnerability occurs if locale.prepend.friendly.url.style=2 and if a custom 404 page is used.

User enumeration vulnerability in Liferay Portal 7.2.0 through 7.4.3.26, and older unsupported versions, and Liferay DXP 7.4 before update 27, 7.3 before update 8, 7.2 before fix pack 20, and older unsupported versions allows remote attackers to determine if an account exist in the application by comparing the request's response time.

User enumeration can occur in the Authentication REST API in Delinea PAM Secret Server 11.4. This allows a remote attacker to determine whether a user is valid because of a difference in responses from the /oauth2/token endpoint.

A vulnerability in the web-based management interface of Cisco ECE could allow an unauthenticated, remote attacker to perform a username enumeration attack against an affected device. This vulnerability is due to differences in authentication responses that are sent back from the application as part of an authentication attempt. An attacker could exploit this vulnerability by sending authentication requests to an affected device. A successful exploit could allow the attacker to confirm existing user accounts, which could be used in further attacks. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

All CODESYS Visualization versions before V4.2.0.0 generate a login dialog vulnerable to information exposure allowing a remote, unauthenticated attacker to enumerate valid users.

The Stop User Enumeration WordPress plugin before version 1.7.3 blocks REST API /wp-json/wp/v2/users/ requests for non-authorized users. However, this can be bypassed by URL-encoding the API path.

Observable Response Discrepancy vulnerability in Tridium Niagara Framework on Windows, Linux, QNX, Tridium Niagara Enterprise Security on Windows, Linux, QNX allows Cryptanalysis. This issue affects Niagara Framework: before 4.14.2, before 4.15.1, before 4.10.11; Niagara Enterprise Security: before 4.14.2, before 4.15.1, before 4.10.11.Tridium recommends upgrading to Niagara Framework and Enterprise Security versions 4.14.2u2, 4.15.u1, or 4.10u.11.

IBM Cognos Controller 10.4.1, 10.4.2, and 11.0.0 could allow a remote user to enumerate usernames due to differentiating error messages on existing usernames. IBM X-Force ID: 199181.

A vulnerability has been identified in Mendix Runtime V10 (All versions < V10.21.0), Mendix Runtime V10.12 (All versions < V10.12.16), Mendix Runtime V10.18 (All versions < V10.18.5), Mendix Runtime V10.6 (All versions < V10.6.22), Mendix Runtime V8 (All versions < V8.18.35), Mendix Runtime V9 (All versions < V9.24.34). Affected applications allow for entity enumeration due to distinguishable responses in certain client actions. This could allow an unauthenticated remote attacker to list all valid entities and attribute names of a Mendix Runtime-based application.

For failed login attempts, the application returns different error messages depending on whether the login failed due to an incorrect password or a non-existing username. This allows an attacker to guess usernames until they find an existing one.

Symfony is a PHP framework for web and console applications and a set of reusable PHP components. The ability to enumerate users was possible without relevant permissions due to different handling depending on whether the user existed or not when attempting to use the switch users functionality. We now ensure that 403s are returned whether the user exists or not if a user cannot switch to a user or if the user does not exist. The patch for this issue is available for branch 3.4.

An exposure of sensitive information vulnerability exists in TCExam <= 14.8.1. If a password reset request was made for an email address that was not registered with a user then we would be presented with an ‘unknown email’ error. If an email is given that is registered with a user then this error will not appear. A malicious actor could abuse this to enumerate the email addresses of

ManageEngine ADSelfService Plus below build 6116 contains an observable response discrepancy in the UMCP operation of the ChangePasswordAPI. This allows an unauthenticated remote attacker to determine whether a Windows domain user exists.

A vulnerability in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to enumerate user accounts. This vulnerability is due to the improper handling of HTTP headers. An attacker could exploit this vulnerability by sending authenticated requests to an affected system. A successful exploit could allow the attacker to compare the HTTP responses that are returned by the affected system to determine which accounts are valid user accounts.

Omnissa Workspace ONE UEM contains an observable response discrepancy vulnerability. A malicious actor may be able to enumerate sensitive information such as tenant ID and user accounts that could facilitate brute-force, password-spraying or credential-stuffing attacks.

Raytha CMS is vulnerable to User Enumeration in password reset functionality. Difference in messages could allow an attacker to determine if the login is valid or not, enabling a brute force attack with valid logins. This issue was fixed in version 1.5.0.

pimcore/admin-ui-classic-bundle provides a Backend UI for Pimcore. In affected versions an error message discloses existing accounts and leads to user enumeration on the target via "Forgot password" function. No generic error message has been implemented. This issue has been addressed in version 1.7.4 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

A vulnerability in the External Interface of OTRS allows conclusions to be drawn about the existence of user accounts through different HTTP response codes and messages. This enables an attacker to systematically identify valid email addresses. This issue affects: * OTRS 7.0.X * OTRS 8.0.X * OTRS 2023.X * OTRS 2024.X * OTRS 2025.X

An issue was discovered in One Identity Password Manager 5.8. An attacker could enumerate valid answers for a user. It is possible for an attacker to detect a valid answer based on the HTTP response content, and reuse this answer later for a password reset on a chosen password. The enumeration is possible because, within the HTTP response content, WRONG ID is only returned when the answer is incorrect.

LabVantage LIMS 8.3 does not properly maintain the confidentiality of database names. For example, the web application exposes the database name. An attacker might be able to enumerate database names by providing his own database name in a request, because the response will return an 'Unrecognized Database exception message if the database does not exist.

In the Voatz application 2020-01-01 for Android, the amount of data transmitted during a single voter's vote depends on the different lengths of the metadata across the available voting choices, which makes it easier for remote attackers to discover this voter's choice by sniffing the network. For example, a small amount of sniffed data may indicate that a vote was cast for the candidate with the least metadata. An active man-in-the-middle attacker can leverage this behavior to disrupt voters' abilities to vote for a candidate opposed by the attacker.

Pega Platform versions 7.1.0 through Infinity 25.1.0 are affected by a User Enumeration. This issue occurs during user authentication process, where a difference in response time could allow a remote unauthenticated user to determine if a username is valid or not. This only applies to deprecated basic-authentication feature and other more secure authentication mechanisms are recommended. A fix is being provided in the 24.1.4, 24.2.4, and 25.1.1 patch releases. Please note: Basic credentials authentication service type is deprecated started in 24.2 version: https://docs.pega.com/bundle/platform/page/platform/release-notes/security/whats-new-security-242.html.

An email address enumeration vulnerability exists in the password reset function of Rocket.Chat through 3.9.1.

SonicOS SSLVPN login page allows a remote unauthenticated attacker to perform firewall management administrator username enumeration based on the server responses. This vulnerability affected SonicOS Gen 5 version 5.9.1.7, 5.9.1.13, Gen 6 version 6.5.4.7, 6.5.1.12, 6.0.5.3, SonicOSv 6.5.4.v and Gen 7 version SonicOS 7.0.0.0.

Versions before 8.9.1, Various resources in Jira responded with a 404 instead of redirecting unauthenticated users to the login page, in some situations this may have allowed unauthorised attackers to determine if certain resources exist or not through an Information Disclosure vulnerability.

An issue was discovered in Arm Mbed TLS before 2.23.0. Because of a side channel in modular exponentiation, an RSA private key used in a secure enclave could be disclosed.

SpinetiX Fusion Digital Signage 3.4.8 contains a username enumeration vulnerability in its login script that allows attackers to identify valid user accounts. Attackers can send crafted login requests with different usernames to distinguish between existing and non-existing accounts by analyzing the server's error responses.

An issue was discovered in Arm Mbed TLS before 2.23.0. A side channel allows recovery of an ECC private key, related to mbedtls_ecp_check_pub_priv, mbedtls_pk_parse_key, mbedtls_pk_parse_keyfile, mbedtls_ecp_mul, and mbedtls_ecp_mul_restartable.

A vulnerability in the TLS handler of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 1000 Series firewalls could allow an unauthenticated, remote attacker to gain access to sensitive information. The vulnerability is due to improper implementation of countermeasures against the Bleichenbacher attack for cipher suites that rely on RSA for key exchange. An attacker could exploit this vulnerability by sending crafted TLS messages to the device, which would act as an oracle and allow the attacker to carry out a chosen-ciphertext attack. A successful exploit could allow the attacker to perform cryptanalytic operations that may allow decryption of previously captured TLS sessions to the affected device. To exploit this vulnerability, an attacker must be able to perform both of the following actions: Capture TLS traffic that is in transit between clients and the affected device Actively establish a considerable number of TLS connections to the affected device

When binding against a DN during authentication, the reply from 389-ds-base will be different whether the DN exists or not. This can be used by an unauthenticated attacker to check the existence of an entry in the LDAP database.

An issue was discovered in the SecurePoll extension for MediaWiki through 1.35.1. The non-admin vote list contains a full vote timestamp, which may provide unintended clues about how a voting process unfolded.

An issue was discovered in MediaWiki before 1.35.1. Missing users (accounts that don't exist) and hidden users (accounts that have been explicitly hidden due to being abusive, or similar) that the viewer cannot see are handled differently, exposing sensitive information about the hidden status to unprivileged viewers. This exists on various code paths.

Saleor is an e-commerce platform. Starting in version 3.21.0 and prior to version 3.21.16, requesting certain fields in the response of `accountRegister` may result in errors that could unintentionally reveal whether a user with the provided email already exists in Saleor. Version 3.21.16 fixes the issue. As a workaround, rate-limit the mutation to reduce the impact.

In Legion of the Bouncy Castle BC before 1.61 and BC-FJA before 1.0.1.2, attackers can obtain sensitive information about a private exponent because of Observable Differences in Behavior to Error Inputs. This occurs in org.bouncycastle.crypto.encodings.OAEPEncoding. Sending invalid ciphertext that decrypts to a short payload in the OAEP Decoder could result in the throwing of an early exception, potentially leaking some information about the private exponent of the RSA private key performing the encryption.

Pritunl 1.29.2145.25 allows attackers to enumerate valid VPN usernames via a series of /auth/session login attempts. Initially, the server will return error 401. However, if the username is valid, then after 20 login attempts, the server will start responding with error 400. Invalid usernames will receive error 401 indefinitely. Note: This has been disputed by the vendor as not a vulnerability. They argue that this is an intended design

User enumeration vulnerability in Devklan's Alma Blog that affects versions 2.1.10 and earlier. This vulnerability could allow a remote user to retrieve all valid users registered in the application just by looking at the request response.

Zitadel is open-source identity infrastructure software. ZITADEL administrators can enable a setting called "Ignoring unknown usernames" which helps mitigate attacks that try to guess/enumerate usernames. If enabled, ZITADEL will show the password prompt even if the user doesn't exist and report "Username or Password invalid". While the setting was correctly respected during the login flow, the user's username was normalized leading to a disclosure of the user's existence. This vulnerability is fixed in 2.71.6, 2.70.8, 2.69.9, 2.68.9, 2.67.13, 2.66.16, 2.65.7, 2.64.6, and 2.63.9.

Umanni RH 1.0 has a user enumeration vulnerability. This issue occurs during password recovery, where a difference in messages could allow an attacker to determine if the user is valid or not, enabling a brute force attack with valid users.

The check user account lock states feature within the email OTP flow fails to validate user input, allowing an attacker to infer the existence of registered user accounts. The discovery of valid usernames can increase the risk of brute-force and social engineering attacks. Attackers can leverage this information to craft targeted phishing campaigns or other malicious activities aimed at tricking users into divulging sensitive data, potentially damaging the organization's reputation and leading to regulatory non-compliance and financial consequences.

A user enumeration vulnerability flaw was found in Venki Supravizio BPM 10.1.2. This issue occurs during password recovery, where a difference in error messages could allow an attacker to determine if a username is valid or not, enabling a brute-force attack with valid usernames.

UrBackup Server 2.5.31 allows brute-force enumeration of user accounts because a failure message confirms that a username is not valid.

Citrix XenApp 6.5, when 2FA is enabled, allows a remote unauthenticated attacker to ascertain whether a user exists on the server, because the 2FA error page only occurs after a valid username is entered. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

A vulnerability has been identified in Mendix Forgot Password (Mendix 10 compatible) (All versions < V5.4.0), Mendix Forgot Password (Mendix 7 compatible) (All versions < V3.7.3), Mendix Forgot Password (Mendix 8 compatible) (All versions < V4.1.3), Mendix Forgot Password (Mendix 9 compatible) (All versions < V5.4.0). Applications using the affected module are vulnerable to user enumeration due to distinguishable responses. This could allow an unauthenticated remote attacker to determine if a user is valid or not, enabling a brute force attack with valid users.

An issue was discovered in Aviatrix Controller before 5.4.1204. There is a Observable Response Discrepancy from the API, which makes it easier to perform user enumeration via brute force.

Piccolo is an ORM and query builder which supports asyncio. In versions 0.120.0 and prior, the implementation of `BaseUser.login` leaks enough information to a malicious user such that they would be able to successfully generate a list of valid users on the platform. As Piccolo on its own does not also enforce strong passwords, these lists of valid accounts are likely to be used in a password spray attack with the outcome being attempted takeover of user accounts on the platform. The impact of this vulnerability is minor as it requires chaining with other attack vectors in order to gain more then simply a list of valid users on the underlying platform. The likelihood of this vulnerability is possible as it requires minimal skills to pull off, especially given the underlying login functionality for Piccolo based sites is open source. This issue has been patched in version 0.121.0.