A remote code execution vulnerability is present in network-listening components in some versions of ArubaOS. An attacker with the ability to transmit specially-crafted IP traffic to a mobility controller could exploit this vulnerability and cause a process crash or to execute arbitrary code within the underlying operating system with full system privileges. Such an attack could lead to complete system compromise. The ability to transmit traffic to an IP interface on the mobility controller is required to carry out an attack. The attack leverages the PAPI protocol (UDP port 8211). If the mobility controller is only bridging L2 traffic to an uplink and does not have an IP address that is accessible to the attacker, it cannot be attacked.

Multipart-file uploads call variables to be improperly registered in the global scope. In cases where variables are not declared explicitly before being used this can lead to unexpected behavior. This affects all supported versions of HHVM prior to the patch (3.25.1, 3.24.5, and 3.21.9 and below).

Certain Lexmark devices through 2023-02-19 mishandle Input Validation (issue 4 of 4).

The hhvm-attach deep link handler in Nuclide did not properly sanitize the provided hostname parameter when rendering. As a result, a malicious URL could be used to render HTML and other content inside of the editor's context, which could potentially be chained to lead to code execution. This issue affected Nuclide prior to v0.290.0.

A vulnerability has been identified in Omnivise T3000 Application Server R9.2 (All versions), Omnivise T3000 R8.2 SP3 (All versions), Omnivise T3000 R8.2 SP4 (All versions). The affected system exposes the port of an internal application on the public network interface allowing an attacker to circumvent authentication and directly access the exposed application.

Insufficient URI encoding in restforce before 3.0.0 allows attacker to inject arbitrary parameters into Salesforce API requests.

An issue was discovered on Samsung mobile devices with N(7.0) (Qualcomm models using MSM8996 chipsets) software. A device can be rooted with a custom image to execute arbitrary scripts in the INIT context. The Samsung ID is SVE-2018-11940 (September 2018).

If exploited, this command injection vulnerability could allow remote attackers to run arbitrary commands. QNAP has already fixed the issue in the following QTS versions. QTS 4.4.2.1231 on build 20200302; QTS 4.4.1.1201 on build 20200130; QTS 4.3.6.1218 on build 20200214; QTS 4.3.4.1190 on build 20200107; QTS 4.3.3.1161 on build 20200109; QTS 4.2.6 on build 20200109.

A vulnerability was discovered in the PyYAML library in versions before 5.3.1, where it is susceptible to arbitrary code execution when it processes untrusted YAML files through the full_load method or with the FullLoader loader. Applications that use the library to process untrusted input may be vulnerable to this flaw. An attacker could use this flaw to execute arbitrary code on the system by abusing the python/object/new constructor.

Buffer overflow in Senkas Kolibri 2.0 allows remote attackers to execute arbitrary code via a long URI in a POST request.

It was found that the jclouds scriptbuilder Statements class wrote a temporary file to a predictable location. An attacker could use this flaw to access sensitive data, cause a denial of service, or perform other attacks.

jpv (aka Json Pattern Validator) before 2.2.2 does not properly validate input, as demonstrated by a corrupted array.

The safe_eval function in Ansible before 1.5.4 does not properly restrict the code subset, which allows remote attackers to execute arbitrary code via crafted instructions.

A vulnerability exists in Sphider Search Engine prior to 1.3.6 due to exec calls in admin/spiderfuncs.php, which could let a remote malicious user execute arbitrary code.

A vulnerability in the web interface of the Cisco RV132W ADSL2+ Wireless-N VPN and RV134W VDSL2 Wireless-AC VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system, including issuing commands with root privileges. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to an incomplete input validation on user-controlled input in an HTTP request to the targeted device. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to execute arbitrary code as the root user and gain full control of the affected system or cause it to reload, resulting in a DoS condition. This vulnerability is fixed in firmware version 1.0.1.11 for the following Cisco products: RV132W ADSL2+ Wireless-N VPN Router and RV134W VDSL2 Wireless-AC VPN Router. Cisco Bug IDs: CSCvg92737, CSCvh60170.

In FreeBSD 12.1-STABLE before r356035, 12.1-RELEASE before 12.1-RELEASE-p4, 11.3-STABLE before r356036, and 11.3-RELEASE before 11.3-RELEASE-p8, incomplete packet data validation may result in accessing out-of-bounds memory leading to a kernel panic or other unpredictable results.

fish (aka fish-shell) 2.0.0 before 2.1.1 does not restrict access to the configuration service (aka fish_config), which allows remote attackers to execute arbitrary code via unspecified vectors, as demonstrated by set_prompt.

wp_kses_bad_protocol in wp-includes/kses.php in WordPress before 5.3.1 mishandles the HTML5 colon named entity, allowing attackers to bypass input sanitization, as demonstrated by the javascript: substring.

AjaxRestrictedCmdStat in zap in Ruckus Wireless Unleashed through 200.7.10.102.64 allows remote code execution via a POST request that uses tools/_rcmdstat.jsp to write to a specified filename.

A vulnerability in the web portal of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to perform a command injection attack and execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation by the web portal framework. An attacker could exploit this vulnerability by providing malicious input during web portal authentication. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

Controllers/InvitationsController.cs in QueryTree before 3.0.99-beta mishandles invitations.

In Network Security Services (NSS) before 3.46, several cryptographic primitives had missing length checks. In cases where the application calling the library did not perform a sanity check on the inputs it could result in a crash due to a buffer overflow.

An issue was discovered in Rsyslog v8.1908.0. contrib/pmcisconames/pmcisconames.c has a heap overflow in the parser for Cisco log messages. The parser tries to locate a log message delimiter (in this case, a space or a colon), but fails to account for strings that do not satisfy this constraint. If the string does not match, then the variable lenMsg will reach the value zero and will skip the sanity check that detects invalid log messages. The message will then be considered valid, and the parser will eat up the nonexistent colon delimiter. In doing so, it will decrement lenMsg, a signed integer, whose value was zero and now becomes minus one. The following step in the parser is to shift left the contents of the message. To do this, it will call memmove with the right pointers to the target and destination strings, but the lenMsg will now be interpreted as a huge value, causing a heap overflow.

In FreeBSD 12.1-STABLE before r356035, 12.1-RELEASE before 12.1-RELEASE-p4, 11.3-STABLE before r356036, and 11.3-RELEASE before 11.3-RELEASE-p8, incomplete packet data validation may result in memory access after it has been freed leading to a kernel panic or other unpredictable results.

Improper Input Validation in GitHub repository publify/publify prior to 9.2.10.

An issue was found in Docker before 1.6.0. Some programs and scripts in Docker are downloaded via HTTP and then executed or used in unsafe ways.

Slackware 14.0 and 14.1, and Slackware LLVM 3.0-i486-2 and 3.3-i486-2, contain world-writable permissions on the /tmp directory which could allow remote attackers to execute arbitrary code with root privileges.

An eval() vulnerability exists in Python Software Foundation Djblets 0.7.21 and Beanbag Review Board before 1.7.15 when parsing JSON requests.

http/impl/client/HttpClientBuilder.java in Apache HttpClient 4.3.x before 4.3.1 does not ensure that X509HostnameVerifier is not null, which allows attackers to have unspecified impact via vectors involving hostname verification.

A vulnerability exists in Schneider Electric's Pelco Sarix Professional in all firmware versions prior to 3.29.67 which could allow execution of commands due to lack of validation of the shell meta characters with the value of 'system.opkg.remove'.

Cryptocat before 2.0.22 has Remote Script Injection due to improperly sanitizing user input

There is an object injection vulnerability in swfupload plugin for wordpress.

A File Inclusion vulnerability exists in Zabbix 2.0.6 due to inadequate sanitization of request strings in CGI scripts, which could let a remote malicious user execute arbitrary code.

Iris 3.8 before build 1548, as used in Xpient point of sale (POS) systems, allows remote attackers to execute arbitrary commands via a crafted request to TCP port 7510, as demonstrated by opening the cash drawer.

Dolibarr ERP/CRM 3.3.1 does not properly validate user input in viewimage.php and barcode.lib.php which allows remote attackers to execute arbitrary commands.

yum does not properly handle bad metadata, which allows an attacker to cause a denial of service and possibly have other unspecified impact via a Trojan horse file in the metadata of a remote repository.

An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. imap/command.c mishandles a long IMAP status mailbox literal count size.

Ruby PDFKit gem prior to 0.5.3 has a Code Execution Vulnerability

TWiki before 5.1.4 allows remote attackers to execute arbitrary shell commands by sending a crafted '%MAKETEXT{}%' parameter value containing Perl backtick characters.

SugarCRM CE <= 6.3.1 contains scripts that use "unserialize()" with user controlled input which allows remote attackers to execute arbitrary PHP code.

Rbot Reaction plugin allows command execution

** UNSUPPORTED WHEN ASSIGNED ** When integrating Apache Axis 1.x in an application, it may not have been obvious that looking up a service through "ServiceFactory.getService" allows potentially dangerous lookup mechanisms such as LDAP. When passing untrusted input to this API method, this could expose the application to DoS, SSRF and even attacks leading to RCE. As Axis 1 has been EOL we recommend you migrate to a different SOAP engine, such as Apache Axis 2/Java. As a workaround, you may review your code to verify no untrusted or unsanitized input is passed to "ServiceFactory.getService", or by applying the patch from https://github.com/apache/axis-axis1-java/commit/7e66753427466590d6def0125e448d2791723210 . The Apache Axis project does not expect to create an Axis 1.x release fixing this problem, though contributors that would like to work towards this are welcome.

Trend Micro ServerProtect for Linux 3.0 before CP 1531 allows attackers to write to arbitrary files and consequently execute arbitrary code with root privileges by leveraging failure to validate software updates.

Chicken before 4.8.0 is susceptible to algorithmic complexity attacks related to hash table collisions.

BabyGekko before 1.2.4 allows PHP file inclusion.

The Struts 1 plugin in Apache Struts 2.1.x and 2.3.x might allow remote code execution via a malicious field value passed in a raw message to the ActionMessage.

HCL Aftermarket DPC is affected by Improper Input Validation which allows an attacker to inject executable code and can carry out attacks such as XSS, SQL Injection, Command Injection etc.

A vulnerability was detected in slackero phpwcms up to 1.9.45/1.10.8. The impacted element is an unknown function of the file include/inc_module/mod_feedimport/inc/processing.inc.php of the component Feedimport Module. Performing manipulation of the argument cnt_text results in deserialization. The attack can be initiated remotely. The exploit is now public and may be used. Upgrading to version 1.9.46 and 1.10.9 is sufficient to resolve this issue. The patch is named 41a72eca0baa9d9d0214fec97db2400bc082d2a9. It is recommended to upgrade the affected component.

A vulnerability classified as critical has been found in slackero phpwcms up to 1.9.45/1.10.8. Affected is the function is_file/getimagesize of the file image_resized.php. The manipulation of the argument imgfile leads to deserialization. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.9.46 and 1.10.9 is able to address this issue. It is recommended to upgrade the affected component.

A SQL injection vulnerability exists in the id2 parameter of the cancel_booking.php page in Online Artwork and Fine Arts MCA Project 1.0. A remote attacker can inject arbitrary SQL queries, leading to database enumeration and potential remote code execution.