Integer Overflow or Wraparound in GitHub repository publify/publify prior to 9.2.10.

Microsoft Outlook Elevation of Privilege Vulnerability

A vulnerability exists in Schneider Electric's Pelco Sarix Professional in all firmware versions prior to 3.29.67 which could allow execution of commands due to lack of validation of the shell meta characters with the value of 'network.ieee8021x.delete_certs'.

A remote code execution vulnerability is present in network-listening components in some versions of ArubaOS. An attacker with the ability to transmit specially-crafted IP traffic to a mobility controller could exploit this vulnerability and cause a process crash or to execute arbitrary code within the underlying operating system with full system privileges. Such an attack could lead to complete system compromise. The ability to transmit traffic to an IP interface on the mobility controller is required to carry out an attack. The attack leverages the PAPI protocol (UDP port 8211). If the mobility controller is only bridging L2 traffic to an uplink and does not have an IP address that is accessible to the attacker, it cannot be attacked.

In certain Lexmark products through 2023-01-12, SSRF can occur because of a lack of input validation.

Drupal before 7.58, 8.x before 8.3.9, 8.4.x before 8.4.6, and 8.5.x before 8.5.1 allows remote attackers to execute arbitrary code because of an issue affecting multiple subsystems with default or common module configurations.

Vulnerability in root-project root (builtins/zlib modules). This vulnerability is associated with program files inffast.C. This issue affects root.

The hhvm-attach deep link handler in Nuclide did not properly sanitize the provided hostname parameter when rendering. As a result, a malicious URL could be used to render HTML and other content inside of the editor's context, which could potentially be chained to lead to code execution. This issue affected Nuclide prior to v0.290.0.

Multipart-file uploads call variables to be improperly registered in the global scope. In cases where variables are not declared explicitly before being used this can lead to unexpected behavior. This affects all supported versions of HHVM prior to the patch (3.25.1, 3.24.5, and 3.21.9 and below).

When a specific function is enabled while joining a AD Domain from ADM, an improper input parameters validation vulnerability in a specific CGI program allowing an unauthenticated remote attacker to write arbitrary data to any file on the system. By exploiting this vulnerability, attackers can overwrite critical system files, leading to a complete system compromise. Affected products and versions include: from ADM 4.1.0 through ADM 4.3.3.ROF1 as well as from ADM 5.0.0 through ADM 5.1.1.RCI1.

A vulnerability exists in Schneider Electric's Pelco Sarix Professional in all firmware versions prior to 3.29.67 which could allow execution of commands due to lack of validation of the shell meta characters with the value of 'model_name' or 'mac_address'.

The pxp-agent component in Puppet Enterprise 2015.3.x before 2015.3.3 and Puppet Agent 1.3.x before 1.3.6 does not properly validate server certificates, which might allow remote attackers to spoof brokers and execute arbitrary commands via a crafted certificate.

An attacker can send a specially crafted message to the Wavelink Avalanche Manager, which could result in service disruption or arbitrary code execution. Thanks to a Researcher at Tenable for finding and reporting. Fixed in version 6.4.1.

White Rabbit Switch contains a vulnerability which makes it possible for an attacker to perform system commands under the context of the web application (the default installation makes the webserver run as the root user).

A vulnerability exists in Schneider Electric's Pelco Sarix Professional in all firmware versions prior to 3.29.67 which could allow execution of commands due to lack of validation of the shell meta characters with the value of 'system.opkg.remove'.

iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of ICC color management profiles. Prior to version 2.3.1.2, iccDEV is vulnerable to heap-buffer-overflow in CIccLocalizedUnicode::GetText(). This issue has been patched in version 2.3.1.2.

iccDEV provides a set of libraries and tools for working with ICC color management profiles. Versions 2.3.1 and below contain a Use After Free vulnerability in the CIccXform::Create() function, where it deletes the hint. This issue is fixed in version 2.3.1.1.

A vulnerability in the Cisco Cluster Management Protocol (CMP) processing code in Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device or remotely execute code with elevated privileges. The Cluster Management Protocol utilizes Telnet internally as a signaling and command protocol between cluster members. The vulnerability is due to the combination of two factors: (1) the failure to restrict the use of CMP-specific Telnet options only to internal, local communications between cluster members and instead accept and process such options over any Telnet connection to an affected device; and (2) the incorrect processing of malformed CMP-specific Telnet options. An attacker could exploit this vulnerability by sending malformed CMP-specific Telnet options while establishing a Telnet session with an affected Cisco device configured to accept Telnet connections. An exploit could allow an attacker to execute arbitrary code and obtain full control of the device or cause a reload of the affected device. This affects Catalyst switches, Embedded Service 2020 switches, Enhanced Layer 2 EtherSwitch Service Module, Enhanced Layer 2/3 EtherSwitch Service Module, Gigabit Ethernet Switch Module (CGESM) for HP, IE Industrial Ethernet switches, ME 4924-10GE switch, RF Gateway 10, and SM-X Layer 2/3 EtherSwitch Service Module. Cisco Bug IDs: CSCvd48893.

Apache OFBiz 12.04.x before 12.04.06 and 13.07.x before 13.07.03 allow remote attackers to execute arbitrary commands via a crafted serialized Java object, related to the Apache Commons Collections library.

The Zabbix Agent 2 item key smart.disk.get does not sanitize its parameters before passing them to a shell command resulting possible vulnerability for remote code execution.

An improper input validation leading to arbitrary file creation was discovered in ToWord of ToOffice. Remote attackers use this vulnerability to execute arbitrary file included malicious code.

A command injection vulnerability in the DHCP activation feature of Weintek cMT-3072XH2 easyweb Web Version v2.1.53, OS v20231011 allows attackers to execute arbitrary commands with root privileges.

Improper input validation vulnerability in Tizen FOTA service prior to Firmware update JUL-2021 Release allows arbitrary code execution via Samsung Accessory Protocol.

Netdata is an open source option for real-time infrastructure monitoring and troubleshooting. An attacker with the ability to establish a streaming connection can execute arbitrary commands on the targeted Netdata agent. When an alert is triggered, the function `health_alarm_execute` is called. This function performs different checks and then enqueues a command by calling `spawn_enq_cmd`. This command is populated with several arguments that are not sanitized. One of them is the `registry_hostname` of the node for which the alert is raised. By providing a specially crafted `registry_hostname` as part of the health data that is streamed to a Netdata (parent) agent, an attacker can execute arbitrary commands at the remote host as a side-effect of the raised alert. Note that the commands are executed as the user running the Netdata Agent. This user is usually named `netdata`. The ability to run arbitrary commands may allow an attacker to escalate privileges by escalating other vulnerabilities in the system, as that user. The problem has been fixed in: Netdata agent v1.37 (stable) and Netdata agent v1.36.0-409 (nightly). As a workaround, streaming is not enabled by default. If you have previously enabled this, it can be disabled. Limiting access to the port on the recipient Agent to trusted child connections may mitigate the impact of this vulnerability.

Insufficient URI encoding in restforce before 3.0.0 allows attacker to inject arbitrary parameters into Salesforce API requests.

It was discovered that the SteelCentral AppInternals Dynamic Sampling Agent's (DSA) AgentDiagnosticServlet has directory traversal vulnerability at the "/api/appInternals/1.0/agent/diagnostic/logs" API. The affected endpoint does not have any input validation of the user's input that allows a malicious payload to be injected.

Dell Networking Switches running Enterprise SONiC versions 4.1.0, 4.0.5, 3.5.4 and below contains an improper input validation vulnerability. A remote unauthenticated malicious user may exploit this vulnerability and escalate privileges up to the highest administrative level. This is a Critical vulnerability affecting certain protocols, Dell recommends customers to upgrade at the earliest opportunity.

Improper input validation vulnerability in HANDY Groupware’s ActiveX moudle allows attackers to download or execute arbitrary files. This vulnerability can be exploited by using the file download or execution path as the parameter value of the vulnerable function.

Crocoblock JetEngine before 2.9.1 does not properly validate and sanitize form data.

An issue was discovered on Samsung mobile devices with N(7.0) (Qualcomm models using MSM8996 chipsets) software. A device can be rooted with a custom image to execute arbitrary scripts in the INIT context. The Samsung ID is SVE-2018-11940 (September 2018).

Improper input validation vulnerability in Tizen bootloader prior to Firmware update JUL-2021 Release allows arbitrary code execution using recovery partition in wireless firmware download mode.

Improper input validation vulnerability in Tizen bootloader prior to Firmware update JUL-2021 Release allows arbitrary code execution using param partition in wireless firmware download mode.

Caddy is an extensible server platform that uses TLS by default. Prior to version 2.11.1, Caddy's FastCGI path splitting logic computes the split index on a lowercased copy of the request path and then uses that byte index to slice the original path. This is unsafe for Unicode because `strings.ToLower()` can change UTF-8 byte length for some characters. As a result, Caddy can derive an incorrect `SCRIPT_NAME`/`SCRIPT_FILENAME` and `PATH_INFO`, potentially causing a request that contains `.php` to execute a different on-disk file than intended (path confusion). In setups where an attacker can control file contents (e.g., upload features), this can lead to unintended PHP execution of non-.php files (potential RCE depending on deployment). Version 2.11.1 fixes the issue.

org.springframework.core.serializer.DefaultDeserializer in Spring AMQP before 1.5.5 allows remote attackers to execute arbitrary code.

If exploited, this command injection vulnerability could allow remote attackers to run arbitrary commands. QNAP has already fixed the issue in the following QTS versions. QTS 4.4.2.1231 on build 20200302; QTS 4.4.1.1201 on build 20200130; QTS 4.3.6.1218 on build 20200214; QTS 4.3.4.1190 on build 20200107; QTS 4.3.3.1161 on build 20200109; QTS 4.2.6 on build 20200109.

CUPS is a standards-based, open-source printing system, and `libppd` can be used for legacy PPD file support. The `libppd` function `ppdCreatePPDFromIPP2` does not sanitize IPP attributes when creating the PPD buffer. When used in combination with other functions such as `cfGetPrinterAttributes5`, can result in user controlled input and ultimately code execution via Foomatic. This vulnerability can be part of an exploit chain leading to remote code execution (RCE), as described in CVE-2024-47176.

langchain_experimental (aka LangChain Experimental) 0.1.17 through 0.3.0 for LangChain allows attackers to execute arbitrary code through sympy.sympify (which uses eval) in LLMSymbolicMathChain. LLMSymbolicMathChain was introduced in fcccde406dd9e9b05fc9babcbeb9ff527b0ec0c6 (2023-10-05).

An issue was discovered in UCI IDOL 2 (aka uciIDOL or IDOL2) through 2.12. Due to improper input validation, improper deserialization, and improper restriction of operations within the bounds of a memory buffer, IDOL2 is vulnerable to Denial-of-Service (DoS) attacks and possibly remote code execution via the \xB0\x00\x3c byte sequence.

An SQLi vulnerability exists in Delta Electronics DIAEnergie v1.10.1.8610 and prior when CEBC.exe processes a 'RecalculateHDMWYC' message, which is split into 4 fields using the '~' character as the separator. An unauthenticated remote attacker can perform SQLi via the fourth field.

A vulnerability exists in the Rockwell Automation FactoryTalk® View SE Datalog function that could allow a threat actor to inject a malicious SQL statement if the SQL database has no authentication in place or if legitimate credentials were stolen. If exploited, the attack could result in information exposure, revealing sensitive information. Additionally, a threat actor could potentially modify and delete the data in a remote database. An attack would only affect the HMI design time, not runtime.

A SQLi vulnerability exists in Delta Electronics DIAEnergie v1.10.1.8610 and prior when CEBC.exe processes a 'RecalculateScript' message, which is splitted into 4 fields using the '~' character as the separator. An unauthenticated remote attacker can perform SQLi via the fourth field

The req package before 3.43.4 for Go may send an unintended request when a malformed URL is provided, because cleanHost in http.go intentionally uses a "garbage in, garbage out" design.

In Django 3.2 before 3.2.19, 4.x before 4.1.9, and 4.2 before 4.2.1, it was possible to bypass validation when using one form field to upload multiple files. This multiple upload has never been supported by forms.FileField or forms.ImageField (only the last uploaded file was validated). However, Django's "Uploading multiple files" documentation suggested otherwise.

An issue in Vypor Attack API System v.1.0 allows a remote attacker to execute arbitrary code via the user GET parameter.

Duplicate of CVE-2024-45806.

This issues due to insufficient verification of the various input values from user’s input. The vulnerability allows remote attackers to execute malicious code in Firstmall via navercheckout_add function.