Command injection in PAN-0S 9.0.2 and earlier may allow an authenticated attacker to gain access to a remote shell in PAN-OS, and potentially run with the escalated user’s permissions.

Command injection in `main/lp/openoffice_text_document.class.php` in Chamilo LMS <= v1.11.24 allows users permitted to upload Learning Paths to obtain remote code execution via improper neutralisation of special characters.

A vulnerability, which was classified as critical, was found in Netgear D6400 1.0.0.114. This affects an unknown part of the file diag.cgi. The manipulation of the argument host_name leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early and confirmed the existence of the vulnerability. They reacted very quickly, professional and kind. This vulnerability only affects products that are no longer supported by the maintainer.

A problem was found in Centreon Web through 19.04.3. An authenticated command injection is present in the page include/configuration/configObject/traps-mibs/formMibs.php. This page is called from the Centreon administration interface. This is the mibs management feature that contains a file filing form. At the time of submission of a file, the mnftr parameter is sent to the page and is not filtered properly. This allows one to inject Linux commands directly.

Improper neutralization of special elements in the SonicWall SSL-VPN SMA100 series management interface allows a remote authenticated attacker to inject OS Commands which potentially leads to remote command execution vulnerability or denial of service (DoS) attack.

A flaw has been found in Linksys MR9600 2.0.6.206937. Affected is the function smartConnectConfigure of the file SmartConnect.lua. Executing a manipulation of the argument configApSsid/configApPassphrase/srpLogin/srpPassword can lead to os command injection. The attack may be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An OS command injection vulnerability has been reported to affect QcalAgent. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: QcalAgent 1.1.8 and later

ASUS RT-AX55’s authentication-related function has a vulnerability of insufficient filtering of special characters within its token-refresh module. An authenticated remote attacker can exploit this vulnerability to perform a Command Injection attack to execute arbitrary commands, disrupt the system or terminate services.

OS Command Injection vulnerability in the db_optimize component of Device42 Asset Management Appliance allows an authenticated attacker to execute remote code on the device. This issue affects: Device42 CMDB version 18.01.00 and prior versions.

On ASUS RT-AX55 3.0.0.4.386.51598 devices, authenticated attackers can perform OS command injection via the /start_apply.htm qos_bw_rulelist parameter. NOTE: for the similar "token-generated module" issue, see CVE-2023-41345; for the similar "token-refresh module" issue, see CVE-2023-41346; for the similar "check token module" issue, see CVE-2023-41347; and for the similar "code-authentication module" issue, see CVE-2023-41348.

OS command injection vulnerability in ELECOM wireless LAN routers allows an authenticated user to execute an arbitrary OS command by sending a specially crafted request. Affected products and versions are as follows: WRC-600GHBK-A all versions, WRC-1467GHBK-A all versions, WRC-1900GHBK-A all versions, WRC-733FEBK2-A all versions, WRC-F1167ACF2 all versions, WRC-1467GHBK-S all versions, and WRC-1900GHBK-S all versions.

OS command injection vulnerability in FURUNO SYSTEMS wireless LAN access point devices allows an authenticated user to execute an arbitrary OS command that is not intended to be executed from the web interface by sending a specially crafted request. Affected products and versions are as follows: ACERA 1320 firmware ver.01.26 and earlier, ACERA 1310 firmware ver.01.26 and earlier, ACERA 1210 firmware ver.02.36 and earlier, ACERA 1150i firmware ver.01.35 and earlier, ACERA 1150w firmware ver.01.35 and earlier, ACERA 1110 firmware ver.01.76 and earlier, ACERA 1020 firmware ver.01.86 and earlier, ACERA 1010 firmware ver.01.86 and earlier, ACERA 950 firmware ver.01.60 and earlier, ACERA 850F firmware ver.01.60 and earlier, ACERA 900 firmware ver.02.54 and earlier, ACERA 850M firmware ver.02.06 and earlier, ACERA 810 firmware ver.03.74 and earlier, and ACERA 800ST firmware ver.07.35 and earlier. They are affected when running in ST(Standalone) mode.

An OS command injection vulnerability has been reported to affect QuMagie. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: QuMagie 2.1.3 and later

A Remote Code Execution (RCE) issue in the addon CUx-Daemon 1.11a of the eQ-3 Homematic CCU-Firmware 2.35.16 until 2.45.6 allows remote authenticated attackers to execute system commands as root remotely via a simple HTTP request.

OS command injection vulnerability in ELECOM wireless LAN access point devices allows an authenticated user to execute an arbitrary OS command by sending a specially crafted request.

OS command injection vulnerability in the CBC products allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter its settings. As for the affected products/versions, see the detailed information provided by the vendor. Note that NR4H, NR8H, NR16H series and DR-16F, DR-8F, DR-4F, DR-16H, DR-8H, DR-4H, DR-4M41 series are no longer supported, therefore updates for those products are not provided.

AdRem NetCrunch 10.6.0.4587 allows Remote Code Execution. In the NetCrunch web client, a read-only administrator can execute arbitrary code on the server running the NetCrunch server software.

Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.

ASUS RT-AC86U unused Traffic Analyzer legacy Statistic function has insufficient filtering of special character. A remote attacker with regular user privilege can exploit this vulnerability to perform command injection attack to execute arbitrary commands, disrupt system or terminate services.

Dell RecoverPoint for Virtual Machines 6.0.x contains an OS Command injection vulnerability. A low privileged remote attacker could potentially exploit this vulnerability by running any command as root, leading to gaining of root-level access and compromise of complete system.

binance-trading-bot is an automated Binance trading bot with trailing buy/sell strategy. Authenticated users of binance-trading-bot can achieve Remote Code Execution on the host system due to a command injection vulnerability in the `/restore` endpoint. The restore endpoint of binance-trading-bot is vulnerable to command injection via the `/restore` endpoint. The name of the uploaded file is passed to shell.exec without sanitization other than path normalization, resulting in Remote Code Execution. This may allow any authorized user to execute code in the context of the host machine. This issue has been addressed in version 0.0.100 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

An issue was discovered on D-Link DIR-818LW devices with firmware 2.06betab01. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the MTU field to SetWanSettings.

An issue was discovered on D-Link DIR-818LW devices with firmware 2.06betab01. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the Type field to SetWanSettings.

An issue was discovered on D-Link DIR-818LW devices from 2.05.B03 to 2.06B01 BETA. There is a command injection in HNAP1 SetWanSettings via an XML injection of the value of the Gateway key.

OpenLearnX is an open-source, decentralized learning and assessment platform. Prior to version 2.0.3, a remote code execution (RCE) vulnerability was identified in the OpenLearnX code execution environment, allowing sandbox escape and arbitrary command execution. This issue has been patched in version 2.0.3.

app/operator_panel/exec.php in the Operator Panel module in FusionPBX 4.4.3 suffers from a command injection vulnerability due to a lack of input validation that allows authenticated non-administrative attackers to execute commands on the host. This can further lead to remote code execution when combined with an XSS vulnerability also present in the FusionPBX Operator Panel module.

An issue was discovered in ONAP SDNC before Dublin. By executing sla/printAsXml with a crafted module parameter, an authenticated user can execute an arbitrary command. All SDC setups that include admportal are affected.

An issue was discovered in Softing uaGate SI 1.60.01. A CGI script is vulnerable to command injection with a maliciously crafted url parameter.

Synel SYnergy Fingerprint Terminals - CWE-78: 'OS Command Injection'

An issue was discovered in ONAP SDNC before Dublin. By executing sla/printAsGv with a crafted module parameter, an authenticated user can execute an arbitrary command. All SDC setups that include admportal are affected.

1Panel is an open source Linux server operation and maintenance management panel. An OS command injection vulnerability exists in 1Panel firewall functionality. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. 1Panel firewall functionality `/hosts/firewall/ip` endpoint read user input without validation, the attacker extends the default functionality of the application, which execute system commands. An attacker can execute arbitrary code on the target system, which can lead to a complete compromise of the system. This issue has been addressed in commit `e17b80cff49` which is included in release version `1.4.3`. Users are advised to upgrade. There are no known workarounds for this vulnerability.

In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 an authenticated remote attacker can execute code with root permissions with a specially crafted HTTP POST when uploading a certificate to the device.

Jenkins Git Client Plugin 2.8.4 and earlier and 3.0.0-rc did not properly restrict values passed as URL argument to an invocation of 'git ls-remote', resulting in OS command injection.

The improper neutralization of special elements in the CGI program of the Zyxel NAS326 firmware version V5.21(AAZF.14)C0 and NAS542 firmware version V5.21(ABAG.11)C0 could allow an authenticated attacker to execute some operating system (OS) commands by sending a crafted URL to a vulnerable device.

Atos Unify OpenScape Session Border Controller through V10 R3.01.03 allows execution of OS commands as root user by low-privileged authenticated users.

Grandstream UCM6204 before 1.0.19.20 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the backupUCMConfig file-backup parameter to the /cgi? URI.

Grandstream GWN7000 before 1.0.6.32 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the filename in a /ubus/uci.apply update_nds_webroot_from_tmp API call.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 and 8.5.0 through 8.5.4 allows attacker to execute unauthorized code or commands via specifically crafted http get request parameters.

A vulnerability was found in TamronOS up to 20230703. It has been classified as critical. This affects an unknown part of the file /api/ping. The manipulation of the argument host leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-233475. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Grandstream GXV3611IR_HD before 1.0.3.23 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the /goform/systemlog?cmd=set logserver field.

Grandstream GWN7610 before 1.0.8.18 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the filename in a /ubus/controller.icc.update_nds_webroot_from_tmp update_nds_webroot_from_tmp API call.

Grandstream GXV3370 before 1.0.1.41 and WP820 before 1.0.3.6 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in a /manager?action=getlogcat priority field.

In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 a remote attacker with low privileges may use a specific HTTP POST releated to certificate operations to gain full access to the device.

In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 a remote attacker with low privileges may use a specific HTTP DELETE request to gain full access to the device.

A vulnerability was found in Ruijie BCR810W 2.5.10. It has been rated as critical. This issue affects some unknown processing of the component Tracert Page. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-233477 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

FTLDNS (pihole-FTL) provides an interactive API and also generates statistics for Pi-hole's Web interface. From 6.0 to before 6.6, the Pi-hole FTL engine contains a Remote Code Execution (RCE) vulnerability in the DHCP lease time configuration parameter (dhcp.leaseTime). This vulnerability allows an authenticated attacker to inject arbitrary dnsmasq configuration directives through newline characters, ultimately achieving command execution on the underlying system. This vulnerability is fixed in 6.6.

IBM Security Guardium 10.6, 11.3, 11.4, and 11.5 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 258824.

A vulnerability was found in csmock where a regular user of the OSH service (anyone with a valid Kerberos ticket) can use the vulnerability to disclose the confidential Snyk authentication token and to run arbitrary commands on OSH workers.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in SonicWall GMS, SonicWall Analytics enables an authenticated attacker to execute arbitrary code with root privileges. This issue affects GMS: 9.3.2-SP1 and earlier versions; Analytics: 2.5.0.4-R7 and earlier versions.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute commands via a network. QuTScloud, QVR, QES are not affected. We have already fixed the vulnerability in the following versions: QTS 4.5.4.2790 build 20240605 and later QuTS hero h4.5.4.2626 build 20231225 and later