n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, the MCP OAuth client registration endpoint accepted unauthenticated requests and stored client data without adequate resource controls. An unauthenticated remote attacker could exhaust server memory resources by sending large registration payloads, rendering the n8n instance unavailable. The MCP enable/disable toggle gates MCP access but did not restrict client registrations, meaning the endpoint is reachable regardless of whether MCP access is enabled on the instance. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1.

MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, when MessagePack-CSharp decompresses Lz4Block or Lz4BlockArray payloads, it reads declared uncompressed lengths from the wire and allocates output buffers based on those lengths before validating that the compressed data is valid or that the declared expansion is reasonable. A small payload can claim a very large uncompressed length and force a large allocation before LZ4 decoding begins. This vulnerability is fixed in 2.5.301 and 3.1.7.

Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.23.0 until 1.35.11, 1.36.7, 1.37.3, and 1.38.1, a vulnerability has been identified in Envoy's zstd decompressor implementation (ZstdDecompressorImpl). When zstd decompression is enabled, processing a specially crafted, highly compressed zstd payload can lead to massive memory allocation. An attacker can exploit this to cause severe memory exhaustion, potentially resulting in an Out-Of-Memory (OOM) kill and Denial of Service (DoS) for the Envoy proxy. This vulnerability is fixed in 1.35.11, 1.36.7, 1.37.3, and 1.38.1.

AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below allow a zip bomb to be used to execute a DoS against the AIOHTTP server. An attacker may be able to send a compressed request that when decompressed by AIOHTTP could exhaust the host's memory. This issue is fixed in version 3.13.3.

urllib3 is an HTTP client library for Python. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. urllib3 can perform decoding or decompression based on the HTTP `Content-Encoding` header (e.g., `gzip`, `deflate`, `br`, or `zstd`). When using the streaming API, the library decompresses only the necessary bytes, enabling partial content consumption. Starting in version 1.22 and prior to version 2.6.3, for HTTP redirect responses, the library would read the entire response body to drain the connection and decompress the content unnecessarily. This decompression occurred even before any read methods were called, and configured read limits did not restrict the amount of decompressed data. As a result, there was no safeguard against decompression bombs. A malicious server could exploit this to trigger excessive resource consumption on the client. Applications and libraries are affected when they stream content from untrusted sources by setting `preload_content=False` when they do not disable redirects. Users should upgrade to at least urllib3 v2.6.3, in which the library does not decode content of redirect responses when `preload_content=False`. If upgrading is not immediately possible, disable redirects by setting `redirect=False` for requests to untrusted source.

kin-openapi is a Go project for handling OpenAPI files. Prior to 0.131.0, when validating a request with a multipart/form-data schema, if the OpenAPI schema allows it, an attacker can upload a crafted ZIP file (e.g., a ZIP bomb), causing the server to consume all available system memory. The root cause comes from the ZipFileBodyDecoder, which is registered automatically by the module (contrary to what the documentation says). This vulnerability is fixed in 0.131.0.

Memory Allocation with Excessive Size Value vulnerability in Apache HTTP Server's mod_http leads to denial of service via malicious HTTP requests. This issue affects Apache HTTP Server: from 2.4.17 through 2.4.67.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.35.11, 1.36.7, 1.37.3, and 1.38.1, a vulnerability in Envoy's HTTP/2 downstream request processing allows an unauthenticated remote client to trigger excessive memory consumption, potentially resulting in OOM termination of the Envoy process and denial of service. The issue arises from the combination of two behaviors. First, cookie header bytes are not fully accounted for during request header size validation in Envoy. Second, HPACK header block limits in oghttp2/quiche are enforced on encoded bytes without a corresponding limit on total decoded header size. Together, these behaviors allow a malicious client to cause large decoded header allocations while bypassing the intended request header size protections. Versions 1.35.11, 1.36.7, 1.37.3, and 1.38.1 contain a fix. No complete workaround is known short of applying a fix. Possible temporary mitigations include disabling downstream HTTP/2 where operationally feasible; enforcing stricter request header and cookie limits before traffic reaches Envoy; and monitoring Envoy memory usage for abnormal growth under HTTP/2 traffic.

urllib3 is an HTTP client library for Python. From 2.6.0 to before 2.7.0, urllib3 could decompress the whole response instead of the requested portion (1) during the second HTTPResponse.read(amt=N) call when the response was decompressed using the official Brotli library or (2) when HTTPResponse.drain_conn() was called after the response had been read and decompressed partially (compression algorithm did not matter here). These issues could cause urllib3 to fully decode a small amount of highly compressed data in a single operation. This could result in excessive resource consumption (high CPU usage and massive memory allocation for the decompressed data) on the client side. This vulnerability is fixed in 2.7.0.

Pillow is a Python imaging library. Versions 10.3.0 through 12.1.1 did not limit the amount of GZIP-compressed data read when decoding a FITS image, making them vulnerable to decompression bomb attacks. A specially crafted FITS file could cause unbounded memory consumption, leading to denial of service (OOM crash or severe performance degradation). If users are unable to immediately upgrade, they should only open specific image formats, excluding FITS, as a workaround.

Unfurl before 2026.04 contains an unbounded zlib decompression vulnerability in parse_compressed.py that allows remote attackers to cause denial of service. Attackers can submit highly compressed payloads via URL parameters to the /json/visjs endpoint that expand to gigabytes, exhausting server memory and crashing the service.

NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.14 and 2.12.5, if the nats-server has the "leafnode" configuration enabled (not default), then anyone who can connect can crash the nats-server by triggering a panic. This happens pre-authentication and requires that compression be enabled (which it is, by default, when leafnodes are used). Versions 2.11.14 and 2.12.5 contain a fix. As a workaround, disable compression on the leafnode port.

cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. Prior to 0.35.0, cpp-httplib (httplib.h) does not enforce Server::set_payload_max_length() on the decompressed request body when using HandlerWithContentReader (streaming ContentReader) with Content-Encoding: gzip (or other supported encodings). A small compressed payload can expand beyond the configured payload limit and be processed by the application, enabling a payload size limit bypass and potential denial of service (CPU/memory exhaustion). This vulnerability is fixed in 0.35.0.

NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. The WebSockets handling of NATS messages handles compressed messages via the WebSockets negotiated compression. Prior to versions 2.11.2 and 2.12.3, the implementation bound the memory size of a NATS message but did not independently bound the memory consumption of the memory stream when constructing a NATS message which might then fail validation for size reasons. An attacker can use a compression bomb to cause excessive memory consumption, often resulting in the operating system terminating the server process. The use of compression is negotiated before authentication, so this does not require valid NATS credentials to exploit. The fix, present in versions 2.11.2 and 2.12.3, was to bounds the decompression to fail once the message was too large, instead of continuing on. The vulnerability only affects deployments which use WebSockets and which expose the network port to untrusted end-points.

GuardDog is a CLI tool to identify malicious PyPI packages. Prior to 2.7.1, GuardDog's safe_extract() function does not validate decompressed file sizes when extracting ZIP archives (wheels, eggs), allowing attackers to cause denial of service through zip bombs. A malicious package can consume gigabytes of disk space from a few megabytes of compressed data. This vulnerability is fixed in 2.7.1.

NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker can cause improper handling of highly compressed data. A successful exploit of this vulnerability might lead to denial of service.

cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. Prior to version 0.30.1, a Denial of Service (DoS) vulnerability exists in cpp-httplib due to the unsafe handling of compressed HTTP request bodies (Content-Encoding: gzip, br, etc.). The library validates the payload_max_length against the compressed data size received from the network, but does not limit the size of the decompressed data stored in memory.

The undici WebSocket client is vulnerable to a denial-of-service attack via unbounded memory consumption during permessage-deflate decompression. When a WebSocket connection negotiates the permessage-deflate extension, the client decompresses incoming compressed frames without enforcing any limit on the decompressed data size. A malicious WebSocket server can send a small compressed frame (a "decompression bomb") that expands to an extremely large size in memory, causing the Node.js process to exhaust available memory and crash or become unresponsive. The vulnerability exists in the PerMessageDeflate.decompress() method, which accumulates all decompressed chunks in memory and concatenates them into a single Buffer without checking whether the total size exceeds a safe threshold.

Protocol::HTTP2 versions before 1.13 for Perl is vulnerable to a HTTP/2 Bomb. Protocol::HTTP2's inbound HPACK path has no header-list size limit, so a small HTTP/2 request can expand into large server memory (the "HTTP/2 bomb"). The headers_decode method materialises a full key+value copy per indexed reference with no running size check, and the stream_header_block_add method appends (since version 1.12) every CONTINUATION frame to the per-stream buffer unbounded. MAX_HEADER_LIST_SIZE (default 65536) is advertised in SETTINGS but never consulted on decode. It is absent from the decoder and from the :limits export tag.

.NET and Visual Studio Denial of Service Vulnerability

Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 secompressors accumulate decompressed data into an intermediate buffer before overwriting the body in the decode/encodeBody. This may allow an attacker to zip bomb the decompressor by sending a small highly compressed payload. Maliciously constructed zip files may exhaust system memory and cause a denial of service. Users are advised to upgrade. Users unable to upgrade may consider disabling decompression.

In h2oai/h2o-3 version 3.46.0.2, a vulnerability exists where uploading and repeatedly parsing a large GZIP file can cause a denial of service. The server becomes unresponsive due to memory exhaustion and a large number of concurrent slow-running jobs. This issue arises from the improper handling of highly compressed data, leading to significant data amplification.

Turms AI-Serving module v0.10.0-SNAPSHOT and earlier contains an image decompression bomb denial of service vulnerability. The ExtendedOpenCVImage class in ai/djl/opencv/ExtendedOpenCVImage.java loads images using OpenCV's imread() function without validating dimensions or pixel count before decompression. An attacker can upload a specially crafted compressed image file (e.g., PNG) that is small when compressed but expands to gigabytes of memory when loaded. This causes immediate memory exhaustion, OutOfMemoryError, and service crash. No authentication is required if the OCR service is publicly accessible. Multiple requests can completely deny service availability.

urllib3 is a user-friendly HTTP client library for Python. Starting in version 1.0 and prior to 2.6.0, the Streaming API improperly handles highly compressed data. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. When streaming a compressed response, urllib3 can perform decoding or decompression based on the HTTP Content-Encoding header (e.g., gzip, deflate, br, or zstd). The library must read compressed data from the network and decompress it until the requested chunk size is met. Any resulting decompressed data that exceeds the requested amount is held in an internal buffer for the next read operation. The decompression logic could cause urllib3 to fully decode a small amount of highly compressed data in a single operation. This can result in excessive resource consumption (high CPU usage and massive memory allocation for the decompressed data.

pypdf is a free and open-source pure-python PDF library. Prior to version 6.1.3, an attacker who uses this vulnerability can craft a PDF which leads to large memory usage. This requires parsing the content stream of a page using the LZWDecode filter. This has been fixed in pypdf version 6.1.3.

Netty is an asynchronous event-driven network application framework for rapid development of maintainable high performance protocol servers & clients. In netty-codec-compression versions 4.1.124.Final and below, and netty-codec versions 4.2.4.Final and below, when supplied with specially crafted input, BrotliDecoder and certain other decompression decoders will allocate a large number of reachable byte buffers, which can lead to denial of service. BrotliDecoder.decompress has no limit in how often it calls pull, decompressing data 64K bytes at a time. The buffers are saved in the output list, and remain reachable until OOM is hit. This is fixed in versions 4.1.125.Final of netty-codec and 4.2.5.Final of netty-codec-compression.

The Apollo Router is a graph router written in Rust to run a federated supergraph that uses Apollo Federation. Versions 0.9.5 until 1.40.2 are subject to a Denial-of-Service (DoS) type vulnerability. When receiving compressed HTTP payloads, affected versions of the Router evaluate the `limits.http_max_request_bytes` configuration option after the entirety of the compressed payload is decompressed. If affected versions of the Router receive highly compressed payloads, this could result in significant memory consumption while the compressed payload is expanded. Router version 1.40.2 has a fix for the vulnerability. Those who are unable to upgrade may be able to implement mitigations at proxies or load balancers positioned in front of their Router fleet (e.g. Nginx, HAProxy, or cloud-native WAF services) by creating limits on HTTP body upload size.