The WBM web application on firmwares prior to 03.02.02 and 03.01.07 on the WAGO PFC100 and PFC2000, respectively, runs on a lighttpd web server and makes use of the FastCGI module, which is intended to provide high performance for all Internet applications without the penalties of Web server APIs. However, the default configuration of this module appears to limit the number of concurrent php-cgi processes to two, which can be abused to cause a denial of service of the entire web server. This affects WAGO PFC200 Firmware version 03.00.39(12) and version 03.01.07(13), and WAGO PFC100 Firmware version 03.00.39(12) and version 03.02.02(14).

TiKV 6.1.2 allows remote attackers to cause a denial of service (fatal error) upon an attempt to get a timestamp from the Placement Driver.

Traefik before 2.10.5 and 3.0.0-beta4 is affected by a denial-of-service vulnerability in HTTP/2 request handling inherited from the Go standard library's HTTP/2 implementation (CVE-2023-44487 / CVE-2023-39325, the 'Rapid Reset' technique). A remote attacker can rapidly create and cancel HTTP/2 streams to exhaust server resources and cause service unavailability.

USG9500 with versions of V500R001C30;V500R001C60 have a denial of service vulnerability. Due to a flaw in the X.509 implementation in the affected products which can result in an infinite loop, an attacker may exploit the vulnerability via a malicious certificate to perform a denial of service attack on the affected products.

comrak is a CommonMark + GFM compatible Markdown parser and renderer written in rust. A range of quadratic parsing issues are present in Comrak. These can be used to craft denial-of-service attacks on services that use Comrak to parse Markdown. This issue has been addressed in version 0.17.0. Users are advised to upgrade. There are no known workarounds for this vulnerability. This issue is also tracked as `GHSL-2023-047`

An issue was discovered in Veal98 Echo Open-Source Community System 2.2 thru 2.3 allowing an unauthenticated attacker to cause the server to send email verification messages to arbitrary users via the /sendEmailCodeForResetPwd endpoint potentially causing a denial of service to the server or the downstream users.

Traefik (pronounced traffic) is a modern HTTP reverse proxy and load balancer for deploying microservices. There is a vulnerability in Go when parsing the HTTP headers, which impacts Traefik. HTTP header parsing could allocate substantially more memory than required to hold the parsed headers. This behavior could be exploited to cause a denial of service. This issue has been patched in versions 2.9.10 and 2.10.0-rc2.

Keep-alive HTTP and HTTPS connections can remain open and inactive for up to 2 minutes in Node.js 6.16.0 and earlier. Node.js 8.0.0 introduced a dedicated server.keepAliveTimeout which defaults to 5 seconds. The behavior in Node.js 6.16.0 and earlier is a potential Denial of Service (DoS) attack vector. Node.js 6.17.0 introduces server.keepAliveTimeout and the 5-second default.

A vulnerability has been identified where a maliciously crafted message containing a specific chain of characters can cause the chat to enter a hot loop on one of the processes, consuming ~120% CPU and rendering the service unresponsive.

A denial-of-service vulnerability exists in the processing of multi-part/form-data requests in the base GoAhead web server application in versions v5.0.1, v.4.1.1 and v3.6.5. A specially crafted HTTP request can lead to an infinite loop in the process. The request can be unauthenticated in the form of GET or POST requests and does not require the requested resource to exist on the server.

A denial of service flaw was found in OpenSSL 0.9.8, 1.0.1, 1.0.2 through 1.0.2h, and 1.1.0 in the way the TLS/SSL protocol defined processing of ALERT packets during a connection handshake. A remote attacker could use this flaw to make a TLS/SSL server consume an excessive amount of CPU and fail to accept connections from other clients.

Unisys ClearPath MCP TCP/IP Networking Services 59.1, 60.0, and 62.0 has an Infinite Loop.

ESI plugin does not have the limit for maximum inclusion depth, and that allows excessive memory consumption if malicious instructions are inserted. Users can use a new setting for the plugin (--max-inclusion-depth) to limit it. This issue affects Apache Traffic Server: from 10.0.0 through 10.0.5, from 9.0.0 through 9.2.10. Users are recommended to upgrade to version 9.2.11 or 10.0.6, which fixes the issue.

Trustwave ModSecurity 3.0.5 through 3.0.8 before 3.0.9 allows a denial of service (worker crash and unresponsiveness) because some inputs cause a segfault in the Transaction class for some configurations.

Nextcloud server is an open source home cloud implementation. In releases of the 25.0.x branch before 25.0.3 an inefficient fetch operation may impact server performances and/or can lead to a denial of service. This issue has been addressed and it is recommended that the Nextcloud Server is upgraded to 25.0.3. There are no known workarounds for this vulnerability.

An issue was discovered in the demo/LINUXTCP implementation of cwalter-at freemodbus v.2018-09-12 allowing attackers to reach an infinite loop via a crafted length value for a packet.

The Candid library causes a Denial of Service while parsing a specially crafted payload with 'empty' data type. For example, if the payload is `record { * ; empty }` and the canister interface expects `record { * }` then the Rust candid decoder treats empty as an extra field required by the type. The problem with the type empty is that the candid Rust library wrongly categorizes empty as a recoverable error when skipping the field and thus causing an infinite decoding loop. Canisters using affected versions of candid are exposed to denial of service by causing the decoding to run indefinitely until the canister traps due to reaching maximum instruction limit per execution round. Repeated exposure to the payload will result in degraded performance of the canister. Note: Canisters written in Motoko are unaffected.

GDSDB infinite loop in Wireshark 4.0.0 to 4.0.5 and 3.6.0 to 3.6.13 allows denial of service via packet injection or crafted capture file

.NET, .NET Framework, and Visual Studio Denial of Service Vulnerability

An exploitable denial-of-service vulnerability exists in the Weave daemon of the Nest Cam IQ Indoor, version 4620002. A set of TCP connections can cause unrestricted resource allocation, resulting in a denial of service. An attacker can connect multiple times to trigger this vulnerability.

Zoho ManageEngine ADSelfService Plus before 6218 allows anyone to conduct a Denial-of-Service attack via the Mobile App Authentication API.

calibre before 5.32.0 contains a regular expression that is vulnerable to ReDoS (Regular Expression Denial of Service) in html_preprocess_rules in ebooks/conversion/preprocess.py.

Math/PrimeField.php in phpseclib 3.x before 3.0.19 has an infinite loop with composite primefields.

A denial-of-service vulnerability exists in Rockwell Automation FactoryTalk Transaction Manager. This vulnerability can be exploited by sending a modified packet to port 400. If exploited, the application could potentially crash or experience a high CPU or memory usage condition, causing intermittent application functionality issues. The application would need to be restarted to recover from the DoS.

A lack of rate limiting in pjActionAjaxSend in Car Rental v3.0 allows attackers to cause resource exhaustion.

In Eclipse Jetty, versions <=9.4.57, <=10.0.25, <=11.0.25, <=12.0.21, <=12.1.0.alpha2, an HTTP/2 client may trigger the server to send RST_STREAM frames, for example by sending frames that are malformed or that should not be sent in a particular stream state, therefore forcing the server to consume resources such as CPU and memory. For example, a client can open a stream and then send WINDOW_UPDATE frames with window size increment of 0, which is illegal. Per specification https://www.rfc-editor.org/rfc/rfc9113.html#name-window_update , the server should send a RST_STREAM frame. The client can now open another stream and send another bad WINDOW_UPDATE, therefore causing the server to consume more resources than necessary, as this case does not exceed the max number of concurrent streams, yet the client is able to create an enormous amount of streams in a short period of time. The attack can be performed with other conditions (for example, a DATA frame for a closed stream) that cause the server to send a RST_STREAM frame. Links: * https://github.com/jetty/jetty.project/security/advisories/GHSA-mmxm-8w33-wc4h

Windows Network Address Translation (NAT) Denial of Service Vulnerability

Uncontrolled resource consumption in Windows Netlogon allows an unauthorized attacker to deny service over a network.

IBM Cognos Analytics 11.0, and 11.1 is vulnerable to a denial of service attack that could allow a remote user to send specially crafted requests that would consume all available CPU and memory resources. IBM X-Force ID: 158973.

Openwsman, versions up to and including 2.6.9, are vulnerable to infinite loop in process_connection() when parsing specially crafted HTTP requests. A remote, unauthenticated attacker can exploit this vulnerability by sending malicious HTTP request to cause denial of service to openwsman server.

In OpenBSD 7.2, a TCP packet with destination port 0 that matches a pf divert-to rule can crash the kernel.

crossplane-runtime is a set of go libraries used to build Kubernetes controllers in Crossplane and its related stacks. An out of memory panic vulnerability has been discovered in affected versions. Applications that use the `Paved` type's `SetValue` method with user provided input without proper validation might use excessive amounts of memory and cause an out of memory panic. In the fieldpath package, the Paved.SetValue method sets a value on the Paved object according to the provided path, without any validation. This allows setting values in slices at any provided index, which grows the target array up to the requested index, the index is currently capped at max uint32 (4294967295) given how indexes are parsed, but that is still an unnecessarily large value. If callers are not validating paths' indexes on their own, which most probably are not going to do, given that the input is parsed directly in the SetValue method, this could allow users to consume arbitrary amounts of memory. Applications that do not use the `Paved` type's `SetValue` method are not affected. This issue has been addressed in versions 0.16.1 and 0.19.2. Users are advised to upgrade. Users unable to upgrade can parse and validate the path before passing it to the `SetValue` method of the `Paved` type, constraining the index size as deemed appropriate.

cmark-gfm is GitHub's fork of cmark, a CommonMark parsing and rendering library and program in C. A polynomial time complexity issue in cmark-gfm may lead to unbounded resource exhaustion and subsequent denial of service. This CVE covers quadratic complexity issues when parsing text which leads with either large numbers of `_` characters. This issue has been addressed in version 0.29.0.gfm.10. Users are advised to upgrade. Users unable to upgrade should validate that their input comes from trusted sources. ### Impact A polynomial time complexity issue in cmark-gfm may lead to unbounded resource exhaustion and subsequent denial of service. ### Proof of concept ``` $ ~/cmark-gfm$ python3 -c 'pad = "_" * 100000; print(pad + "." + pad, end="")' | time ./build/src/cmark-gfm --to plaintext ``` Increasing the number 10000 in the above commands causes the running time to increase quadratically. ### Patches This vulnerability have been patched in 0.29.0.gfm.10. ### Note on cmark and cmark-gfm XXX: TBD [cmark-gfm](https://github.com/github/cmark-gfm) is a fork of [cmark](https://github.com/commonmark/cmark) that adds the GitHub Flavored Markdown extensions. The two codebases have diverged over time, but share a common core. These bugs affect both `cmark` and `cmark-gfm`. ### Credit We would like to thank @gravypod for reporting this vulnerability. ### References https://en.wikipedia.org/wiki/Time_complexity ### For more information If you have any questions or comments about this advisory: * Open an issue in [github/cmark-gfm](https://github.com/github/cmark-gfm)

Versions of the package libredwg before 0.12.5.6384 are vulnerable to Denial of Service (DoS) due to an out-of-bounds read involving section->num_pages in decode_r2007.c.

An improperly performed length calculation on a buffer in PlaintextRecordLayer could lead to an infinite loop and denial-of-service based on user input. This issue affected versions of fizz prior to v2019.03.04.00.

Versions of the package sidekiq before 7.1.3 are vulnerable to Denial of Service (DoS) due to insufficient checks in the dashboard-charts.js file. An attacker can exploit this vulnerability by manipulating the localStorage value which will cause excessive polling requests.

Zoho ManageEngine ServiceDesk Plus through 14104, Asset Explorer through 6987, ServiceDesk Plus MSP before 14000, and Support Center Plus before 14000 allow Denial-of-Service (DoS).

Bematech (formerly Logic Controls, now Elgin) MP-4200 TH printer contains a denial of service vulnerability in the admin configuration page. Remote attackers can send crafted POST requests with malformed 'admin' and 'person' parameters to crash the printer's web service, causing a denial of service condition.

Versions of the package asyncua before 0.9.96 are vulnerable to Denial of Service (DoS) such that an attacker can send a malformed packet and as a result, the server will enter into an infinite loop and consume excessive memory.

An issue found in DUALSPACE Super Secuirty v.2.3.7 allows an attacker to cause a denial of service via the SharedPreference files.

An uncontrolled resource consumption vulnerability in Juniper Networks Junos OS on QFX5000 Series and EX4600 Series switches allows an attacker sending large amounts of legitimate traffic destined to the device to cause Interchassis Control Protocol (ICCP) interruptions, leading to an unstable control connection between the Multi-Chassis Link Aggregation Group (MC-LAG) nodes which can in turn lead to traffic loss. Continued receipt of this amount of traffic will create a sustained Denial of Service (DoS) condition. An indication that the system could be impacted by this issue is the following log message: "DDOS_PROTOCOL_VIOLATION_SET: Warning: Host-bound traffic for protocol/exception LOCALNH:aggregate exceeded its allowed bandwidth at fpc <fpc number> for <n> times, started at <timestamp>" This issue affects Juniper Networks Junos OS on QFX5000 Series and EX4600 Series: 15.1 versions prior to 15.1R7-S9; 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S5; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R2-S8, 18.4R3-S7; 19.1 versions prior to 19.1R3-S5; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S2; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3-S2; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2; 20.4 versions prior to 20.4R1-S1, 20.4R2.

XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. It's possible to make the farm unusable by adding an object to a page with a huge number (e.g. 67108863). Most of the time this will fill the memory allocated to XWiki and make it unusable every time this document is manipulated. This issue has been patched in XWiki 14.0-rc-1.

AnyDesk 7.0.8 allows remote Denial of Service.

Uncontrolled resource consumption in Windows Standards-Based Storage Management Service allows an unauthorized attacker to deny service over a network.

Mod_gnutls is a TLS module for Apache HTTPD based on GnuTLS. Versions from 0.9.0 to 0.12.0 (including) did not properly fail blocking read operations on TLS connections when the transport hit timeouts. Instead it entered an endless loop retrying the read operation, consuming CPU resources. This could be exploited for denial of service attacks. If trace level logging was enabled, it would also produce an excessive amount of log output during the loop, consuming disk space. The problem has been fixed in commit d7eec4e598158ab6a98bf505354e84352f9715ec, please update to version 0.12.1. There are no workarounds, users who cannot update should apply the errno fix detailed in the security advisory.

vLLM is an inference and serving engine for large language models (LLMs). From 0.1.0 to before 0.10.1.1, a Denial of Service (DoS) vulnerability can be triggered by sending a single HTTP GET request with an extremely large header to an HTTP endpoint. This results in server memory exhaustion, potentially leading to a crash or unresponsiveness. The attack does not require authentication, making it exploitable by any remote user. This vulnerability is fixed in 0.10.1.1.

Microsoft Defender Denial of Service Vulnerability

The recv_and_process_client_pkt function in networking/ntpd.c in busybox allows remote attackers to cause a denial of service (CPU and bandwidth consumption) via a forged NTP packet, which triggers a communication loop.

node-jose is a JavaScript implementation of the JSON Object Signing and Encryption (JOSE) for web browsers and node.js-based servers. Prior to version 2.2.0, when using the non-default "fallback" crypto back-end, ECC operations in `node-jose` can trigger a Denial-of-Service (DoS) condition, due to a possible infinite loop in an internal calculation. For some ECC operations, this condition is triggered randomly; for others, it can be triggered by malicious input. The issue has been patched in version 2.2.0. Since this issue is only present in the "fallback" crypto implementation, it can be avoided by ensuring that either WebCrypto or the Node `crypto` module is available in the JS environment where `node-jose` is being run.

opentelemetry-go-contrib is a collection of extensions for OpenTelemetry-Go. The v0.38.0 release of `go.opentelemetry.io/contrib/instrumentation/net/http/otelhttp` uses the `httpconv.ServerRequest` function to annotate metric measurements for the `http.server.request_content_length`, `http.server.response_content_length`, and `http.server.duration` instruments. The `ServerRequest` function sets the `http.target` attribute value to be the whole request URI (including the query string)[^1]. The metric instruments do not "forget" previous measurement attributes when `cumulative` temporality is used, this means the cardinality of the measurements allocated is directly correlated with the unique URIs handled. If the query string is constantly random, this will result in a constant increase in memory allocation that can be used in a denial-of-service attack. This issue has been addressed in version 0.39.0. Users are advised to upgrade. There are no known workarounds for this issue.