** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This issue affects the function cgi_del_photo of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument current_path leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This affects the function cgi_create_album of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument current_path leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability classified as critical was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This vulnerability affects the function cgi_set_cover of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument album_name leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

D-Link DIR-868L Hardware version A1, firmware version 1.12 is vulnerable to Buffer Overflow. The vulnerability is in scandir.sgi binary.

D-Link DSL-3782 EU v1.01:EU v1.03 is affected by a buffer overflow which can cause a denial of service. This vulnerability exists in the web interface "/cgi-bin/New_GUI/Igmp.asp". Authenticated remote attackers can trigger this vulnerability by sending a long string in parameter 'igmpsnoopEnable' via an HTTP request.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as an 'unset' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'unset <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'read' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'read <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

A security vulnerability has been detected in D-Link DIR-816 1.10CNB05. Affected is an unknown function of the file /goform/form2WlanBasicSetup.cgi of the component goahead. Such manipulation of the argument pskValue leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'commit' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'commit <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'get' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'get <node_name attr>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

D-Link DSL-3782 v1.01 is vulnerable to Buffer Overflow in /New_GUI/ParentalControl.asp.

Stack-based buffer overflow in the DIR-645 Wired/Wireless Router Rev. Ax with firmware 1.04b12 and earlier allows remote attackers to execute arbitrary code via a long string in a GetDeviceSettings action to the HNAP interface.

A weakness has been identified in D-Link DIR-816 1.10CNB05. This impacts an unknown function of the file /goform/form2Wl5RepeaterStep2.cgi of the component goahead. This manipulation of the argument key1/key2/key3/key4/pskValue causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was detected in D-Link DWR-M960 1.01.07. Affected by this vulnerability is the function sub_44E0F8 of the file /boafrm/formNewSchedule. Performing a manipulation of the argument url results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used.

A security vulnerability has been detected in D-Link DWR-M960 1.01.07. Affected is the function sub_457C5C of the file /boafrm/formWsc. Such manipulation of the argument save_apply leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed publicly and may be used.

A vulnerability has been found in D-Link DWR-M960 1.01.07. This affects the function sub_4196C4 of the file /boafrm/formVpnConfigSetup of the component VPN Configuration Endpoint. The manipulation of the argument submit-url leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in D-Link DWR-M960 1.01.07. Affected by this issue is the function sub_42B5A0 of the file /boafrm/formBridgeVlan of the component Bridge VLAN Configuration Endpoint. Performing a manipulation of the argument submit-url results in stack-based buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.

A flaw has been found in D-Link DWR-M960 1.01.07. Affected by this issue is the function sub_468D64 of the file /boafrm/formDhcpv6s. Executing a manipulation of the argument submit-url can lead to stack-based buffer overflow. The attack can be executed remotely. The exploit has been published and may be used.

A flaw has been found in D-Link DWR-M960 1.01.07. This affects the function sub_4237AC of the file /boafrm/formLteSetup of the component LTE Configuration Endpoint. Executing a manipulation of the argument submit-url can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been published and may be used.

A vulnerability was identified in D-Link DWR-M960 1.01.07. The affected element is the function sub_41914C of the file /boafrm/formWanConfigSetup of the component WAN Interface Setting Handler. The manipulation of the argument submit-url leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.

A vulnerability was found in D-Link DWR-M960 1.01.07. Affected by this vulnerability is the function sub_424AFC of the file /boafrm/formFilter of the component Filter Configuration Endpoint. The manipulation of the argument submit-url results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used.

A vulnerability was detected in D-Link DWR-M960 1.01.07. This affects the function sub_462E14 of the file /boafrm/formSysLog of the component System Log Configuration Endpoint. Performing a manipulation of the argument submit-url results in stack-based buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.

A vulnerability was determined in D-Link DWR-M960 1.01.07. Affected by this issue is the function sub_423E00 of the file /boafrm/formPortFw of the component Port Forwarding Configuration Endpoint. This manipulation of the argument submit-url causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.

A vulnerability was determined in D-Link DWR-M960 1.01.07. Impacted is the function sub_427D74 of the file /boafrm/formIpQoS. Executing a manipulation of the argument submit-url can lead to stack-based buffer overflow. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized.

A security flaw has been discovered in D-Link DWR-M960 1.01.07. The impacted element is the function sub_469104 of the file /boafrm/formIpv6Setup. The manipulation of the argument submit-url results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks.

A flaw has been found in D-Link DWR-M960 1.01.07. This impacts the function sub_4611CC of the file /boafrm/formNtp of the component NTP Configuration Endpoint. Executing a manipulation of the argument submit-url can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been published and may be used.

Buffer Overflow vulnerability in D-Link DSR-150, DSR-150N, DSR-250, DSR-250N, DSR-500N, DSR-1000N from 3.13 to 3.17B901C allows unauthenticated users to execute remote code execution.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device has a custom binary called mp4ts under the /var/www/video folder. It seems that this binary dumps the HTTP VERB in the system logs. As a part of doing that it retrieves the HTTP VERB sent by the user and uses a vulnerable sprintf function at address 0x0000C3D4 in the function sub_C210 to copy the value into a string and then into a log file. Since there is no bounds check being performed on the environment variable at address 0x0000C360 this results in a stack overflow and overwrites the PC register allowing an attacker to execute buffer overflow or even a command injection attack.

Stack-based buffer overflow in login_mgr.cgi in D-Link firmware DNR-320L and DNS-320LW before 1.04b08, DNR-322L before 2.10 build 03, DNR-326 before 2.10 build 03, and DNS-327L before 1.04b01 allows remote attackers to execute arbitrary code by crafting malformed "Host" and "Referer" header values.

D-LINK DI-8003 v16.07.26A1 was discovered to contain a buffer overflow via the ip parameter in the ip_position_asp function.

DI-8100 v16.07.26A1 is vulnerable to Buffer Overflow In the ip_position_asp function via the ip parameter.

D-LINK DI-8003 v16.07.16A1 was discovered to contain a buffer overflow via the fn parameter in the tgfile_htm function.

D-LINK DI-8003 v16.07.26A1 was discovered to contain a buffer overflow via the host_ip parameter in the ipsec_road_asp function.

D-LINK DI-8003 v16.07.16A1 was discovered to contain a buffer overflow via the notify parameter in the arp_sys_asp function.

Buffer overflow in ACME micro_httpd, as used in D-Link DSL2750U and DSL2740U and NetGear WGR614 and MR-ADSL-DG834 routers allows remote attackers to cause a denial of service (crash) via a long string in the URI in a GET request.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The binary orthrus in /sbin folder of the device handles all the UPnP connections received by the device. It seems that the binary performs a sprintf operation at address 0x0000A3E4 with the value in the command line parameter "-f" and stores it on the stack. Since there is no length check, this results in corrupting the registers for the function sub_A098 which results in memory corruption.

A vulnerability, which was classified as critical, has been found in D-Link DI-8100 16.07.26A1. This issue affects some unknown processing of the file /menu_nat_more.asp of the component HTTP Request Handler. The manipulation leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in D-Link DI-8100 1.0. This vulnerability affects the function sprintf of the file /upnp_ctrl.asp of the component jhttpd. The manipulation of the argument remove_ext_proto/remove_ext_port leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DI-8100 16.07.26A1 and classified as critical. This issue affects some unknown processing of the file /arp_sys.asp of the component HTTP Request Handler. The manipulation leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in D-Link DWR-M960 1.01.07. This vulnerability affects the function sub_462590 of the file /boafrm/formOpMode of the component Operation Mode Configuration Endpoint. The manipulation of the argument submit-url leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DWR-M960 1.01.07. This issue affects the function sub_452CCC of the file /boafrm/formWlEncrypt of the component WLAN Encryption Configuration Endpoint. The manipulation of the argument submit-url results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used.

A vulnerability was found in D-Link DI-500WF 17.04.10A1T. It has been declared as critical. Affected by this vulnerability is the function sprintf of the file ip_position.asp of the component jhttpd. The manipulation of the argument ip leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'staticGet' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'staticGet <node_name attr>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

A vulnerability was determined in D-Link DWR-M960 1.01.07. Impacted is the function sub_453140 of the file /boafrm/formWlAc of the component Wireless Access Control Endpoint. This manipulation of the argument submit-url causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.

A vulnerability was found in D-Link DWR-M960 1.01.07. This vulnerability affects the function sub_460F30 of the file /boafrm/formDateReboot of the component Scheduled Reboot Configuration Endpoint. The manipulation of the argument submit-url results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary performs a memcpy operation at address 0x00011E34 with the value sent in the "Authorization: Basic" RTSP header and stores it on the stack. The number of bytes to be copied are calculated based on the length of the string sent in the RTSP header by the client. As a result, memcpy copies more data then it can hold on stack and this results in corrupting the registers for the caller function sub_F6CC which results in memory corruption. The severity of this attack is enlarged by the fact that the same value is then copied on the stack in the function 0x00011378 and this allows to overflow the buffer allocated and thus control the PC register which will result in arbitrary code execution on the device.

A vulnerability has been found in D-Link DWR-M960 1.01.07. Affected is the function sub_4648F0 of the file /boafrm/formDdns of the component DDNS Settings Handler. The manipulation of the argument submit-url leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DI-8100 16.07.21. It has been rated as critical. Affected by this issue is some unknown functionality of the file /pppoe_base.asp of the component jhttpd. The manipulation of the argument mschap_en leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.