VinChin Backup & Recovery v5.0.*, v6.0.*, v6.7.*, and v7.0.* was discovered to contain a command injection vulnerability.

An issue in TOTOlink X6000R V9.4.0cu.852_B20230719 allows a remote attacker to execute arbitrary code via the setTracerouteCfg function of the stecgi.cgi component.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_411D00 function.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_412688 function.

An issue in TOTOlink X6000R V9.4.0cu.852_B20230719 allows a remote attacker to execute arbitrary code via the setLedCfg function.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_41590C function.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-web-viewer-request-on" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a command execution vulnerability via the sub_ The 41DD80 function.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a command execution vulnerability via the sub_415258 function.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-acknerr-request" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

Tenda TX9 Pro 22.03.02.10 devices allow OS command injection via set_route (called by doSystemCmd_route).

A command injection vulnerability in the DDNS service configuration of Western Digital My Cloud OS 5 devices running firmware versions prior to 5.26.119 allows an attacker to execute code in the context of the root user.

A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_415498 function.

Tenda AX3 V16.03.12.11 was discovered to contain a command injection vulnerability via the lanip parameter at /goform/AdvSetLanip.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_ The 41A414 function.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability via the ddnsDomainName parameter in the Dynamic DNS settings.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_422BD4 function.

An issue in ZIONCOM (Hong Kong) Technology Limited A7000R v.4.1cu.4154 allows an attacker to execute arbitrary code via the cig-bin/cstecgi.cgi to the settings/setPasswordCfg function.

Certain models of Industrial Cellular Gateway developed by Planet Technology have an OS Command Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the device.

An issue in PGYER codefever v.2023.8.14-2ce4006 allows a remote attacker to execute arbitrary code via a crafted request to the branchList component.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability that could allow an attacker to execute code in the context of the root user on a vulnerable CGI file was discovered in Western Digital My Cloud OS 5 devicesThis issue affects My Cloud OS 5: before 5.26.119.

An issue was found on TRENDnet TEW-831DR 1.0 601.130.1.1356 devices. An OS injection vulnerability exists within the web interface, allowing an attacker with valid credentials to execute arbitrary shell commands.

The improper neutralization of special elements in the WSGI server of the Zyxel NAS326 firmware version V5.21(AAZF.14)C0 and NAS542 firmware version V5.21(ABAG.11)C0 could allow an unauthenticated attacker to execute some operating system (OS) commands by sending a crafted URL to a vulnerable device.

The Telenium Online Web Application is vulnerable due to a PHP endpoint accessible to unauthenticated network users that improperly handles user-supplied input. This vulnerability occurs due to the insecure termination of a regular expression check within the endpoint. Because the input is not correctly validated or sanitized, an unauthenticated attacker can inject arbitrary operating system commands through a crafted HTTP request, leading to remote code execution on the server in the context of the web application service account.

A remote code execution issue was discovered in Zoho ManageEngine Applications Manager before 13.6 (build 13640). The publicly accessible testCredential.do endpoint takes multiple user inputs and validates supplied credentials by accessing a specified system. This endpoint calls several internal classes, and then executes a PowerShell script. If the specified system is OfficeSharePointServer, then the username and password parameters to this script are not validated, leading to Command Injection.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability via the wakeup_mac parameter in the Wake-On-LAN (WoL) function. This vulnerability is exploited via a crafted payload.

A vulnerability was identified in D-Link DIR-645 105B01. This issue affects the function soapcgi_main of the file /soap.cgi. Such manipulation of the argument service leads to command injection. The attack can be launched remotely. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.

An OS command injection vulnerability exists in web2py 2.24.1 and earlier. When the product is configured to use notifySendHandler for logging (not the default configuration), a crafted web request may execute an arbitrary OS command on the web server using the product.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QTS 4.5.4.2627 build 20231225 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTS hero h4.5.4.2626 build 20231225 and later QuTScloud c5.1.5.2651 and later

A command injection vulnerability in the web server of the Zyxel NAS326 firmware version V5.21(AAZF.14)C0 and NAS542 firmware version V5.21(ABAG.11)C0 could allow an unauthenticated attacker to execute some operating system (OS) commands by sending a crafted URL to a vulnerable device.

A vulnerability was found in TOTOLINK EX1200L EN_V9.3.5u.6146_B20201023 and classified as critical. This issue affects the function setWanCfg. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-237515. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability in the Changing Username and Password function. This vulnerability is exploited via a crafted payload.

BeyondTrust Privileged Remote Access (PRA) and Remote Support (RS) versions 23.2.1 and 23.2.2 contain a command injection vulnerability which can be exploited through a malicious HTTP request. Successful exploitation of this vulnerability can allow an unauthenticated remote attacker to execute underlying operating system commands within the context of the site user. This issue is fixed in version 23.2.3.

D-LINK DWL-6610 FW_v_4.3.0.8B003C was discovered to contain a command injection vulnerability in the function sub_2EF50. This vulnerability allows attackers to execute arbitrary commands via the manual-time-string parameter.

D-LINK DWL-6610 FW_v_4.3.0.8B003C was discovered to contain a command injection vulnerability in the function web_cert_download_handler. This vulnerability allows attackers to execute arbitrary commands via the certDownload parameter.

A vulnerability was identified in Ruijie WS7204-A 2017.06.15. Affected by this vulnerability is an unknown functionality of the file /itbox_pi/branch_import.php?a=branch_list. Such manipulation of the argument province leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Wavlink WL-WN578W2 221110. The impacted element is the function sub_409184 of the file /wizard_rep.shtml. The manipulation of the argument sel_EncrypTyp results in command injection. The attack may be performed from remote. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

An issue in TOTOLINK X6000R V9.4.0cu.652_B20230116 and V9.4.0cu.852_B20230719 allows a remote attacker to execute arbitrary code via the IP parameter of the setDiagnosisCfg component.

D-LINK DWL-6610 FW_v_4.3.0.8B003C was discovered to contain a command injection vulnerability in the function config_upload_handler. This vulnerability allows attackers to execute arbitrary commands via the configRestore parameter.

N.V.K.INTER CO., LTD. (NVK) iBSG v3.5 was discovered to contain a command injection vulnerability via the system_hostname parameter at /manage/network-basic.php.

HP OpenView Network Node Manager 6.2 through 7.50 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) node parameter to connectedNodes.ovpl, (2) cdpView.ovpl, (3) freeIPaddrs.ovpl, and (4) ecscmg.ovpl.

An issue in franfinance before v.2.0.27 allows a remote attacker to execute arbitrary code via the validation.php, and controllers/front/validation.php components.

A command injection vulnerability is present that permits an unauthenticated user with access to the Aruba Instant web interface to execute arbitrary system commands within the underlying operating system. An attacker could use this ability to copy files, read configuration, write files, delete files, or reboot the device. Workaround: Block access to the Aruba Instant web interface from all untrusted users. Resolution: Fixed in Aruba Instant 4.2.4.12, 6.5.4.11, 8.3.0.6, and 8.4.0.1

An issue in TOTOLINK X6000R V9.4.0cu.652_B20230116 and V9.4.0cu.852_B20230719 allows a remote attacker to execute arbitrary code via the hostName parameter of the switchOpMode component.

NextGen Healthcare Mirth Connect before version 4.4.1 is vulnerable to unauthenticated remote code execution. Note that this vulnerability is caused by the incomplete patch of CVE-2023-37679.

Dasan Networks - W-Web versions 1.22-1.27 - CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')

D-LINK DIR-806 1200M11AC wireless router DIR806A1_FW100CNb11 is vulnerable to command injection due to lax filtering of REMOTE_PORT parameters.

An issue was discovered in ClipBucket before 4.0.0 Release 4902. Any OS commands can be injected via shell metacharacters in the file_name parameter to /api/file_uploader.php or /actions/file_downloader.php.

TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the pppoePass parameter in the setIpv6Cfg function.