Tinxy WiFi Lock Controller v1 RF was discovered to transmit sensitive information in plaintext, including control information and device credentials, allowing attackers to possibly intercept and access sensitive information via a man-in-the-middle attack.

In certain cases, SNI could have been sent unencrypted even when encrypted DNS was enabled. This vulnerability affects Firefox < 139 and Thunderbird < 139.

MedDream WEB DICOM Viewer Cleartext Transmission of Credentials Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of MedDream WEB DICOM Viewer. Authentication is not required to exploit this vulnerability. The specific flaw exists within the Web Portal. The issue results from the lack of encryption when transmitting credentials. An attacker can leverage this vulnerability to disclose transmitted credentials, leading to further compromise. Was ZDI-CAN-25842.

Using the AES-128-CCM algorithm for IPSec on certain Palo Alto Networks PAN-OS® firewalls (PA-7500, PA-5400, PA-5400f, PA-3400, PA-1600, PA-1400, and PA-400 Series) leads to unencrypted data transfer to devices that are connected to the PAN-OS firewall through IPSec. This issue does not affect Cloud NGFWs, Prisma® Access instances, or PAN-OS VM-Series firewalls. NOTE: The AES-128-CCM encryption algorithm is not recommended for use.

A vulnerability has been identified in SCALANCE LPE9403 (6GK5998-3GS00-2AC2) (All versions with SINEMA Remote Connect Edge Client installed). Affected devices do transmit sensitive information in cleartext. This could allow a privileged local attacker to retrieve this sensitive information.

A vulnerability has been identified in SIRIUS 3RK3 Modular Safety System (MSS) (All versions), SIRIUS Safety Relays 3SK2 (All versions). The affected devices do not encrypt data in transit. An attacker with network access could eavesdrop the connection and retrieve sensitive information, including obfuscated safety passwords.

ToolHive is a utility designed to simplify the deployment and management of Model Context Protocol (MCP) servers. Due to the ordering of code used to start an MCP server container, versions of ToolHive prior to 0.0.33 inadvertently store secrets in the run config files which are used to restart stopped containers. This means that an attacker who has access to the home folder of the user who starts the MCP server can read secrets without needing access to the secrets store itself. This only applies to secrets which were used in containers whose run configs exist at a point in time - other secrets remaining inaccessible. ToolHive 0.0.33 fixes the issue. Some workarounds are available. Stop and delete any running MCP servers, or manually remove any runconfigs from `$HOME/Library/Application Support/toolhive/runconfigs/` (macOS) or `$HOME/.state/toolhive/runconfigs/` (Linux).

The Pixmeo Osirix MD Web Portal sends credential information without encryption, which could allow an attacker to steal credentials.

On affected platforms running Arista EOS with secure Vxlan configured, restarting the Tunnelsec agent will result in packets being sent over the secure Vxlan tunnels in the clear.

WF2220 exposes endpoint /cgi-bin-igd/netcore_get.cgi that returns configuration of the device to unauthorized users. Returned configuration includes cleartext password. The vendor was contacted early about this disclosure but did not respond in any way.

Cleartext Transmission of Sensitive Information vulnerability in Crestron Automate VX allows Sniffing Network Traffic. The device allows Web UI and API access over non-secure network ports which exposes sensitive information such as user passwords. This issue affects Automate VX: from 5.6.8161.21536 through 6.4.0.49.

An issue was discovered on goTenna v1 devices with app 5.5.3 and firmware 0.25.5. A command channel includes the next hop. which can be intercepted and used to break frequency hopping.

An issue was discovered on goTenna Mesh devices with app 5.5.3 and firmware 1.1.12. By default, a GID is the user's phone number unless they specifically opt out. A phone number is very sensitive information because it can be tied back to individuals. The app does not encrypt the GID in messages.

An issue was discovered on goTenna v1 devices with app 5.5.3 and firmware 0.25.5. By default, the GID is the user's phone number unless they specifically opt out. A phone number is very sensitive information because it can be tied back to individuals. The app does not encrypt the GID in messages.

IBM InfoSphere Information Server 11.7 DataStage Flow Designer  transmits sensitive information via URL or query parameters that could be exposed to an unauthorized actor using man in the middle techniques.

This vulnerability exists in the Meon KYC solutions due to transmission of sensitive data in plain text within the response payloads of certain API endpoints. An authenticated remote attacker could exploit this vulnerability by intercepting API response that contains unencrypted sensitive information belonging to other users. Successful exploitation of this vulnerability could allow remote attacker to impersonate the target user and gain unauthorized access to the user account.

Cilium is a networking, observability, and security solution with an eBPF-based dataplane. Versions 1.15.0 to 1.15.15, 1.16.0 to 1.16.8, and 1.17.0 to 1.17.2, are vulnerable when using Wireguard transparent encryption in a Cilium cluster, packets that originate from a terminating endpoint can leave the source node without encryption due to a race condition in how traffic is processed by Cilium. This issue has been patched in versions 1.15.16, 1.16.9, and 1.17.3. There are no workarounds available for this issue.

In JetBrains Toolbox App before 2.6 unencrypted credential transmission during SSH authentication was possible

Arctera/Veritas Data Insight before 7.1.2 can send cleartext credentials when configured to use HTTP Basic Authentication to a Dell Isilon OneFS server.

Milestone Systems has discovered a security vulnerability in Milestone XProtect installer that resets system configuration password after the upgrading from older versions using specific installers. The system configuration password is an additional, optional protection that is enabled on the Management Server. To mitigate the issue, we highly recommend updating system configuration password via GUI with a standard procedure. Any system upgraded with 2024 R1 or 2024 R2 release installer is vulnerable to this issue. Systems upgraded from 2023 R3 or older with version 2025 R1 and newer are not affected.

Cleartext transmission of sensitive information issue exists in Wi-Fi AP UNIT 'AC-WPS-11ac series'. If exploited, a man-in-the-middle attack may allow a remote unauthenticated attacker to eavesdrop the communication and obtain the authentication information.

SAP Commerce Cloud (Public Cloud) does not allow to disable unencrypted HTTP (port 80) entirely, but instead allows a redirect from port 80 to 443 (HTTPS). As a result, Commerce normally communicates securely over HTTPS. However, the confidentiality and integrity of data sent on the first request before the redirect may be impacted if the client is configured to use HTTP and sends confidential data on the first request before the redirect.

A vulnerability classified as problematic has been found in Consumer Comanda Mobile up to 14.9.3.2/15.0.0.8. This affects an unknown part of the component Restaurant Order Handler. The manipulation of the argument Login/Password leads to cleartext transmission of sensitive information. The attack can only be initiated within the local network. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used.

SaTECH BCU in its firmware version 2.1.3 uses the HTTP protocol. The use of the HTTP protocol for web browsing has the problem that information is exchanged in unencrypted text. Since sensitive data such as credentials are exchanged, an attacker could obtain them and log in legitimately.

IBM Cloud Pak System 2.3.3.0, 2.3.3.3, 2.3.3.3 iFix1, 2.3.3.4, 2.3.3.5, 2.3.3.6, 2.3.36 iFix1, 2.3.3.6 iFix2, 2.3.3.7, 2.3.3.7 iFix1, 2.3.4.0, and 2.3.4.1 stores sensitive data in memory, that could be obtained by an unauthorized user.

A protocol flaw vulnerability exists in the Xiaomi Mi Connect Service APP. The vulnerability is caused by the validation logic is flawed and can be exploited by attackers to leak sensitive user information.

Insecure Shiro cookie configurations in OpenDaylight Service Function Chaining (SFC) Subproject SFC Sodium-SR4 and below allow attackers to access sensitive information via a man-in-the-middle attack.

Incorrect Use of Privileged APIs, Cleartext Transmission of Sensitive Information, Insufficiently Protected Credentials vulnerability in Sechard Information Technologies SecHard allows Authentication Bypass, Interface Manipulation, Authentication Abuse, Harvesting Information via API Event Monitoring.This issue affects SecHard: before 3.3.0.20220411.

In phpipam/phpipam version 1.5.1, the Secure attribute for sensitive cookies in HTTPS sessions is not set. This could cause the user agent to send those cookies in plaintext over an HTTP session, potentially exposing sensitive information. The issue is fixed in version 1.7.0.

This issue was addressed by using HTTPS when sending information over the network. This issue is fixed in iOS 18.2 and iPadOS 18.2. A user in a privileged network position may be able to leak sensitive information.

The device uses an unencrypted, proprietary protocol for communication. Through this protocol, configuration data is transmitted and device authentication is performed. An attacker can thereby intercept the authentication hash and use it to log into the device using a pass-the-hash attack.

Bitdefender Box, versions 1.3.11.490 through 1.3.11.505, uses the insecure HTTP protocol to download assets over the Internet to update and restart daemons and detection rules on the devices. Updates can be remotely triggered through the /set_temp_token API method. Then, an unauthenticated and network-adjacent attacker can use man-in-the-middle (MITM) techniques to return malicious responses. Restarted daemons that use malicious assets can then be exploited for remote code execution on the device.

Secure flag not set and SameSIte was set to Lax in the Foreseer Reporting Software (FRS). Absence of this secure flag could lead into the session cookie being transmitted over unencrypted HTTP connections. This security issue has been resolved in the latest version of FRS v1.5.100.

Lack of encryption in transit for cloud infrastructure facilitating potential for sensitive data manipulation or exposure.

Bosscomm IF740 Firmware versions:11001.7078 & v11001.0000 and System versions: 6.25 & 6.00 were discovered to send communications to the update API in plaintext, allowing attackers to access sensitive information via a man-in-the-middle attack.

The administrative web interface of a Netgear C7800 Router running firmware version 6.01.07 (and possibly others) authenticates users via basic authentication, with an HTTP header containing a base64 value of the plaintext username and password. Because the web server also does not utilize transport security by default, this renders the administrative credentials vulnerable to eavesdropping by an adversary during every authenticated request made by a client to the router over a WLAN, or a LAN, should the adversary be able to perform a man-in-the-middle attack.

If Brocade Fabric OS before Fabric OS 9.2.0 configuration settings are not set to encrypt SNMP passwords, then the SNMP privsecret / authsecret fields can be exposed in plaintext. The plaintext passwords can be exposed in a configupload capture or a supportsave capture if encryption of passwords is not enabled. An attacker can use these passwords to fetch values of the supported OIDs via SNMPv3 queries. There are also a limited number of MIB objects that can be modified.

CWE-319: Cleartext Transmission of Sensitive Information vulnerability exists that could result in the exposure of data when network traffic is being sniffed by an attacker.

In Progress® Telerik® Report Server, versions prior to 2025 Q1 (11.0.25.211) when using the older .NET Framework implementation, communication of non-sensitive information between the service agent process and app host process occurs over an unencrypted tunnel, which can be subjected to local network traffic sniffing.

The Temporal api-go library prior to version 1.44.1 did not send `update response` information to Data Converter when the proxy package within the api-go module was used in a gRPC proxy prior to transmission. This resulted in information contained within the `update response` field not having Data Converter transformations (e.g. encryption) applied. This is an issue only when using the UpdateWorkflowExecution APIs (released on 13th January 2025) with a proxy leveraging the api-go library before version 1.44.1. Other data fields were correctly sent to Data Converter. This issue does not impact the Data Converter server. Data was encrypted in transit. Temporal Cloud services are not impacted.

Forever KidsWatch Call Me KW-50 R36_YDR_A3PW_GM7S_V1.0_2019_07_15_16.19.24_cob_h suffers from Cleartext Transmission of Sensitive Information due to lack of encryption in device-server communication.

IBM Security Verify Access Appliance and Container 10.0.0 through 10.0.8 transmits sensitive or security-critical data in cleartext in a communication channel that can be sniffed by unauthorized actors.

A vulnerability in HPE Aruba Networking ClearPass Policy Manager may, under certain circumstances, expose sensitive unencrypted information. Exploiting this vulnerability could allow an attacker to perform a man-in-the-middle attack, potentially granting unauthorized access to network resources as well as enabling data tampering.

IBM Security Verify Governance 10.0.2 Identity Manager can transmit user credentials in clear text that could be obtained by an attacker using man in the middle techniques.

A vulnerability has been found in Intelbras InControl up to 2.21.58 and classified as problematic. This vulnerability affects unknown code of the file /v1/usuario/ of the component Registered User Handler. The manipulation leads to cleartext transmission of sensitive information. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 2.21.59 is able to address this issue. It is recommended to upgrade the affected component.

A Credential Exposure Vulnerability exists in the above-mentioned product and version. The vulnerability is due to using HTTP resulting in credentials being sent in clear text.

EWON Flexy 202 transmits user credentials in clear text with no encryption when a user is added, or user credentials are changed via its webpage.

IBM QRadar SIEM 7.5 transmits sensitive or security-critical data in cleartext in a communication channel that could be obtained by an unauthorized actor using man in the middle techniques.

IBM Storage Defender 2.0.0 through 2.0.7 on-prem defender-sensor-cmd CLI could allow a remote attacker to obtain sensitive information, caused by sending network requests over an insecure channel. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques.

IBM Concert Software 1.0.0 and 1.0.1 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques.

All versions of ETIC Telecom Remote Access Server (RAS) prior to 4.5.0 expose clear text credentials in the web portal. An attacker can access the ETIC RAS web portal and view the HTML code, which is configured to be hidden, thus allowing a connection to the ETIC RAS ssh server, which could enable an attacker to perform actions on the device.