Moby is an open source container framework. In versions prior to 29.5.1 and in moby/moby v2 prior to v2.0.0-beta.14, when a compressed archive is uploaded to a container via `PUT /containers/{id}/archive` or piped through `docker cp -`, the daemon resolves decompression binaries (such as `xz` or `unpigz`) from the container's filesystem rather than the host's due to incorrect ordering of operations. A malicious container image containing a trojanized decompression binary can achieve arbitrary code execution with full daemon privileges, including host root UID and unrestricted capabilities, when a user uploads a compressed (xz or gzip) archive into that container. This issue is fixed in Docker Engine 29.5.1 and moby/moby v2.0.0-beta.14. Workarounds include only running containers from trusted images, using authorization plugins to restrict access to the `PUT /containers/{id}/archive` endpoint, and avoiding piping compressed archives into containers created from untrusted images

(*x509.Certificate).VerifyHostname previously called matchHostnames in a loop over all DNS Subject Alternative Name (SAN) entries. This caused strings.Split(host, ".") to execute repeatedly on the same input hostname. With a large DNS SAN list, verification costs scaled quadratically based on the number of SAN entries multiplied by the hostname's label count. Because x509.Verify validates hostnames before building the certificate chain, this overhead occurred even for untrusted certificates.

iskorotkov/avro is a fast Go Avro codec. Prior to 2.33.0, the Avro array and map decoders looped over an attacker-controlled block-count value without checking the underlying reader's error state inside the loop body. Reader.ReadBlockHeader returns the count as a Go int, which is 64-bit on amd64 / arm64 targets — so a producer can declare a block of up to math.MaxInt64 (~9.2 × 10¹⁸) elements followed by EOF (or any truncated payload), and the decoder will attempt that many no-op iterations before propagating the error. The realistic ceiling is "indefinite until the worker is killed externally" — a single hostile payload pins a CPU core until the process is OOM-killed, deadline-cancelled, or terminated. Remote, unauthenticated denial-of-service. This vulnerability is fixed in 2.33.0.

iskorotkov/avro is a fast Go Avro codec. Prior to 2.33.0, several Avro decoder paths read attacker-controlled 64-bit values from the wire format and either narrowed them to platform-sized int before bounds-checking, or summed them with overflow-prone signed-int arithmetic. On 32-bit targets (GOARCH=386, arm, mips, wasm, etc.), the truncation paths can silently bypass byte-slice limits, select the wrong union branch, or hit the OCF negative-make panic via wrap. Three sub-issues are not 32-bit-specific: cumulative-size arithmetic overflow in arrayDecoder.Decode / mapDecoder.Decode / mapDecoderUnmarshaler.Decode (wraps at math.MaxInt64 on amd64 / arm64 and bypasses MaxSliceAllocSize / MaxMapAllocSize), math.MinInt negation in block-header handling, and make([]byte, size) with a negative size in OCF block reads — all three panic or bypass caps on any platform, giving an attacker a denial-of-service primitive there. This vulnerability is fixed in 2.33.0.

The ToASCII and ToUnicode functions incorrectly accept Punycode-encoded labels that decode to an ASCII-only label. For example, ToUnicode("xn--example-.com") incorrectly returns the name "example.com" rather than an error. This behavior can lead to privilege escalation in programs using the idna package. For example, a program which performs privilege checks on the ASCII hostname may reject "example.com" but permit "xn--example-.com". If that program subsequently converts the ASCII hostname to Unicode, it will inadvertently permits access to the Unicode name "example.com".

When using LookupCNAME with the cgo DNS resolver, a very long CNAME response can trigger a double-free of C memory and a crash.

Improper Validation of Certificate with Host Mismatch vulnerability in Apache Thrift. This issue affects Apache Thrift: before 0.23.0. Users are recommended to upgrade to version 0.23.0, which fixes the issue.

Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the remote read endpoint (/api/v1/read) does not validate the declared decoded length in a snappy-compressed request body before allocating memory. An unauthenticated attacker can send a small payload that causes a huge heap allocation per request. Under concurrent load this can exhaust available memory and crash the Prometheus process. This issue has been patched in versions 3.5.3 and 3.11.3.

Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the client_secret field in the Azure AD remote write OAuth configuration (storage/remote/azuread) was typed as string instead of Secret. Prometheus redacts fields of type Secret when serving the configuration via the /-/config HTTP API endpoint. Because the field was a plain string, the Azure OAuth client secret was exposed in plaintext to any user or process with access to that endpoint. This issue has been patched in versions 3.5.3 and 3.11.3.

Out-of-bounds Read vulnerability in Apache Thrift. This issue affects Apache Thrift: before 0.23.0. Users are recommended to upgrade to version 0.23.0, which fixes the issue.

Uncontrolled Recursion vulnerability in Apache Thrift. This issue affects Apache Thrift: before 0.23.0. Users are recommended to upgrade to version 0.23.0, which fixes the issue.

Integer Overflow or Wraparound vulnerability in Apache Thrift. This issue affects Apache Thrift: before 0.23.0. Users are recommended to upgrade to version 0.23.0, which fixes the issue.

Out-of-bounds Read vulnerability in Apache Thrift. This issue affects Apache Thrift: before 0.23.0. Users are recommended to upgrade to version 0.23.0, which fixes the issue.

Improper Validation of Certificate with Host Mismatch vulnerability in Apache Thrift. This issue affects Apache Thrift: before 0.23.0. Users are recommended to upgrade to version 0.23.0, which fixes the issue.

Integer Overflow or Wraparound vulnerability in Apache Thrift TFramedTransport Go language implementation This issue affects Apache Thrift: before 0.23.0. Users are recommended to upgrade to version 0.23.0, which fixes the issue.

Tempo queries with large limits can cause large memory allocations which can impact the availability of the service, depending on its deployment strategy. Mitigation can be done by setting max_result_limit in the search config, e.g. to 262144 (2^18). Alternatively, automatically restart the service.

During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 and users of crypto/tls.

If one side of the TLS connection sends multiple key update messages post-handshake in a single record, the connection can deadlock, causing uncontrolled consumption of resources. This can lead to a denial of service. This only affects TLS 1.3.

When verifying a certificate chain containing excluded DNS constraints, these constraints are not correctly applied to wildcard DNS SANs which use a different case than the constraint. This only affects validation of otherwise trusted certificate chains, issued by a root CA in the VerifyOptions.Roots CertPool, or in the system certificate pool.

Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. Prior to 4.1.4 and 3.0.5, decrypting a JSON Web Encryption (JWE) object will panic if the alg field indicates a key wrapping algorithm (one ending in KW, with the exception of A128GCMKW, A192GCMKW, and A256GCMKW) and the encrypted_key field is empty. The panic happens when cipher.KeyUnwrap() in key_wrap.go attempts to allocate a slice with a zero or negative length based on the length of the encrypted_key. This code path is reachable from ParseEncrypted() / ParseEncryptedJSON() / ParseEncryptedCompact() followed by Decrypt() on the resulting object. Note that the parse functions take a list of accepted key algorithms. If the accepted key algorithms do not include any key wrapping algorithms, parsing will fail and the application will be unaffected. This panic is also reachable by calling cipher.KeyUnwrap() directly with any ciphertext parameter less than 16 bytes long, but calling this function directly is less common. Panics can lead to denial of service. This vulnerability is fixed in 4.1.4 and 3.0.5.

Moby is an open source container framework. Prior to version 29.3.1, a security vulnerability has been detected that allows plugins privilege validation to be bypassed during docker plugin install. Due to an error in the daemon's privilege comparison logic, the daemon may incorrectly accept a privilege set that differs from the one approved by the user. Plugins that request exactly one privilege are also affected, because no comparison is performed at all. This issue has been patched in version 29.3.1.

The DataRow.Decode function fails to properly validate field lengths. A malicious or compromised PostgreSQL server can send a DataRow message with a negative field length, causing a slice bounds out of range panic.

The Delete function fails to properly validate offsets when processing malformed JSON input. This can lead to a negative slice index and a runtime panic, allowing a denial of service attack.

goxmlsig provides XML Digital Signatures implemented in Go. Prior to version 1.6.0, the `validateSignature` function in `validate.go` goes through the references in the `SignedInfo` block to find one that matches the signed element's ID. In Go versions before 1.22, or when `go.mod` uses an older version, there is a loop variable capture issue. The code takes the address of the loop variable `_ref` instead of its value. As a result, if more than one reference matches the ID or if the loop logic is incorrect, the `ref` pointer will always end up pointing to the last element in the `SignedInfo.References` slice after the loop. goxmlsig version 1.6.0 contains a patch.

NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, if a nats-server is run with static credentials for all clients provided via argv (the command-line), then those credentials are visible to any user who can see the monitoring port, if that too is enabled. The `/debug/vars` end-point contains an unredacted copy of argv. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, configure credentials inside a configuration file instead of via argv, and do not enable the monitoring port if using secrets in argv. Best practice remains to not expose the monitoring port to the Internet, or to untrusted network sources.

NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, a malicious client which can connect to the WebSockets port can cause unbounded memory use in the nats-server before authentication; this requires sending a corresponding amount of data. This is a milder variant of CVE-2026-27571. That earlier issue was a compression bomb, this vulnerability is not. Attacks against this new issue thus require significant client bandwidth. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, disable websockets if not required for project deployment.

NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, a client which can connect to the leafnode port can crash the nats-server with a certain malformed message pre-authentication. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, disable leafnode support if not needed or restrict network connections to the leafnode port, if plausible without compromising the service offered.

NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, when using ACLs on message subjects, these ACLs were not applied in the `$MQTT.>` namespace, allowing MQTT clients to bypass ACL checks for MQTT subjects. Versions 2.11.15 and 2.12.6 contain a fix. No known workarounds are available.

NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, for MQTT deployments using usercodes/passwords: MQTT passwords are incorrectly classified as a non-authenticating identity statement (JWT) and exposed via monitoring endpoints. Versions 2.11.14 and 2.12.6 contain a fix. As a workaround, ensure monitoring end-points are adequately secured. Best practice remains to not expose the monitoring endpoint to the Internet or other untrusted network users.

NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.14 and 2.12.5, if the nats-server has the "leafnode" configuration enabled (not default), then anyone who can connect can crash the nats-server by triggering a panic. This happens pre-authentication and requires that compression be enabled (which it is, by default, when leafnodes are used). Versions 2.11.14 and 2.12.5 contain a fix. As a workaround, disable compression on the leafnode port.

NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Starting in version 2.2.0 and prior to versions 2.11.14 and 2.12.5, a missing sanity check on a WebSockets frame could trigger a server panic in the nats-server. This happens before authentication, and so is exposed to anyone who can connect to the websockets port. Versions 2.11.14 and 2.12.5 contains a fix. A workaround is available. The vulnerability only affects deployments which use WebSockets and which expose the network port to untrusted end-points. If one is able to do so, a defense in depth of restricting either of these will mitigate the attack.

gRPC-Go is the Go language implementation of gRPC. Versions prior to 1.79.3 have an authorization bypass resulting from improper input validation of the HTTP/2 `:path` pseudo-header. The gRPC-Go server was too lenient in its routing logic, accepting requests where the `:path` omitted the mandatory leading slash (e.g., `Service/Method` instead of `/Service/Method`). While the server successfully routed these requests to the correct handler, authorization interceptors (including the official `grpc/authz` package) evaluated the raw, non-canonical path string. Consequently, "deny" rules defined using canonical paths (starting with `/`) failed to match the incoming request, allowing it to bypass the policy if a fallback "allow" rule was present. This affects gRPC-Go servers that use path-based authorization interceptors, such as the official RBAC implementation in `google.golang.org/grpc/authz` or custom interceptors relying on `info.FullMethod` or `grpc.Method(ctx)`; AND that have a security policy contains specific "deny" rules for canonical paths but allows other requests by default (a fallback "allow" rule). The vulnerability is exploitable by an attacker who can send raw HTTP/2 frames with malformed `:path` headers directly to the gRPC server. The fix in version 1.79.3 ensures that any request with a `:path` that does not start with a leading slash is immediately rejected with a `codes.Unimplemented` error, preventing it from reaching authorization interceptors or handlers with a non-canonical path string. While upgrading is the most secure and recommended path, users can mitigate the vulnerability using one of the following methods: Use a validating interceptor (recommended mitigation); infrastructure-level normalization; and/or policy hardening.

url.Parse insufficiently validated the host/authority component and accepted some invalid URLs.

When verifying a certificate chain which contains a certificate containing multiple email address constraints which share common local portions but different domain portions, these constraints will not be properly applied, and only the last constraint will be considered.

urllib3 is an HTTP client library for Python. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. urllib3 can perform decoding or decompression based on the HTTP `Content-Encoding` header (e.g., `gzip`, `deflate`, `br`, or `zstd`). When using the streaming API, the library decompresses only the necessary bytes, enabling partial content consumption. Starting in version 1.22 and prior to version 2.6.3, for HTTP redirect responses, the library would read the entire response body to drain the connection and decompress the content unnecessarily. This decompression occurred even before any read methods were called, and configured read limits did not restrict the amount of decompressed data. As a result, there was no safeguard against decompression bombs. A malicious server could exploit this to trigger excessive resource consumption on the client. Applications and libraries are affected when they stream content from untrusted sources by setting `preload_content=False` when they do not disable redirects. Users should upgrade to at least urllib3 v2.6.3, in which the library does not decode content of redirect responses when `preload_content=False`. If upgrading is not immediately possible, disable redirects by setting `redirect=False` for requests to untrusted source.