Sun Calendar Express Web Server in Sun ONE Calendar Server 6.0 and Sun Java System Calendar Server 6 2004Q2 through 6.3-7.01 allows remote attackers to cause a denial of service (daemon crash) via multiple requests to the default URI with alphabetic characters in the tzid parameter.

Pexip Infinity 25.x before 25.4 has Improper Input Validation, and thus an unauthenticated remote attacker can cause a denial of service via the administrative web interface.

Rockwell Automation MicroLogix 1100, all versions, allows a remote, unauthenticated attacker sending specially crafted commands to cause the PLC to fault when the controller is switched to RUN mode, which results in a denial-of-service condition. If successfully exploited, this vulnerability will cause the controller to fault whenever the controller is switched to RUN mode.

Pexip Infinity before 26 allows remote denial of service because of missing RTMP input validation.

Squid 3.0 through 3.0.STABLE16 and 3.1 through 3.1.0.11 allows remote attackers to cause a denial of service via malformed requests including (1) "missing or mismatched protocol identifier," (2) missing or negative status value," (3) "missing version," or (4) "missing or invalid status number," related to (a) HttpMsg.cc and (b) HttpReply.cc.

requests/status.xml in VLC 0.9.8a allows remote attackers to cause a denial of service (stack consumption and crash) via a long input argument in an in_play action.

An Improper Input Validation vulnerability in Packet Forwarding Engine manager (FXPC) process of Juniper Networks Junos OS allows an attacker to cause a Denial of Service (DoS) by sending specific DHCPv6 packets to the device and crashing the FXPC service. Continued receipt and processing of this specific packet will create a sustained Denial of Service (DoS) condition. This issue affects only the following platforms in ACX Series: ACX500, ACX1000, ACX1100, ACX2100, ACX2200, ACX4000, ACX5048, ACX5096 devices. Other ACX platforms are not affected from this issue. This issue affects Juniper Networks Junos OS on ACX500, ACX1000, ACX1100, ACX2100, ACX2200, ACX4000, ACX5048, ACX5096: 18.4 version 18.4R3-S7 and later versions prior to 18.4R3-S8. This issue does not affect: Juniper Networks Junos OS 18.4 versions prior to 18.4R3-S7 on ACX500, ACX1000, ACX1100, ACX2100, ACX2200, ACX4000, ACX5048, ACX5096.

Unspecified vulnerability in the server in IBM DB2 8 before FP17a, 9.1 before FP6a, and 9.5 before FP3a allows remote authenticated users to cause a denial of service (trap) via a crafted data stream.

The pluto IKE daemon in Openswan and Strongswan IPsec 2.6 before 2.6.21 and 2.4 before 2.4.14, and Strongswan 4.2 before 4.2.14 and 2.8 before 2.8.9, allows remote attackers to cause a denial of service (daemon crash and restart) via a crafted (1) R_U_THERE or (2) R_U_THERE_ACK Dead Peer Detection (DPD) IPsec IKE Notification message that triggers a NULL pointer dereference related to inconsistent ISAKMP state and the lack of a phase2 state association in DPD.

The spnego_gss_accept_sec_context function in lib/gssapi/spnego/spnego_mech.c in MIT Kerberos 5 (aka krb5) 1.5 through 1.6.3, when SPNEGO is used, allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via invalid ContextFlags data in the reqFlags field in a negTokenInit token.

Apple Safari 4 Beta build 528.16 allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via a feeds: URI beginning with a (1) % (percent), (2) { (open curly bracket), (3) } (close curly bracket), (4) ^ (caret), (5) ` (backquote), or (6) | (pipe) character, followed by an & (ampersand) character.

Squid 2.7 to 2.7.STABLE5, 3.0 to 3.0.STABLE12, and 3.1 to 3.1.0.4 allows remote attackers to cause a denial of service via an HTTP request with an invalid version number, which triggers a reachable assertion in (1) HttpMsg.c and (2) HttpStatusLine.c.

libike in Sun Solaris 9 and 10, and OpenSolaris before snv_100, does not properly check packets, which allows remote attackers to cause a denial of service (in.iked daemon crash) via an unspecified IKE packet, a different vulnerability than CVE-2007-2989.

Unspecified vulnerability in IBM DB2 8 before FP17a, 9.1 before FP6a, and 9.5 before FP3a allows remote attackers to cause a denial of service (infinite loop) via a crafted CONNECT data stream.

The Electronic Messaging System Microsoft Data Base (EMSMDB32) provider in Microsoft Exchange 2000 Server SP3 and Exchange Server 2003 SP2, as used in Exchange System Attendant, allows remote attackers to cause a denial of service (application outage) via a malformed MAPI command, aka "Literal Processing Vulnerability."

Apple iTunes before 8.1 on Windows allows remote attackers to cause a denial of service (infinite loop) via a Digital Audio Access Protocol (DAAP) message with a crafted Content-Length header.

In FreeBSD 13.0-STABLE before n245765-bec0d2c9c841, 12.2-STABLE before r369859, 11.4-STABLE before r369866, 13.0-RELEASE before p1, 12.2-RELEASE before p7, and 11.4-RELEASE before p10, missing message validation in libradius(3) could allow malicious clients or servers to trigger denial of service in vulnerable servers or clients respectively.

Possible buffer overflow due to Improper validation of received CF-ACK and CF-Poll data frames in Snapdragon Auto, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music

msnmsgr.exe in Windows Live Messenger (WLM) 2009 build 14.0.8064.206, and other 14.0.8064.x builds, allows remote attackers to cause a denial of service (application crash) via a modified header in a packet, as possibly demonstrated by a UTF-8.0 value of the charset field in the Content-Type header line. NOTE: this has been reported as a format string vulnerability by some sources, but the provenance of that information is unknown.

cumulative-distribution-function is an open source npm library used which calculates statistical cumulative distribution function from data array of x values. In versions prior to 2.0.0 apps using this library on improper data may crash or go into an infinite-loop. In the case of a nodejs server-app using this library to act on invalid non-numeric data, the nodejs server may crash. This may affect other users of this server and/or require the server to be rebooted for proper operation. In the case of a browser app using this library to act on invalid non-numeric data, that browser may crash or lock up. A flaw enabling an infinite-loop was discovered in the code for evaluating the cumulative-distribution-function of input data. Although the documentation explains that numeric data is required, some users may confuse an array of strings like ["1","2","3","4","5"] for numeric data [1,2,3,4,5] when it is in fact string data. An infinite loop is possible when the cumulative-distribution-function is evaluated for a given point when the input data is string data rather than type `number`. This vulnerability enables an infinite-cpu-loop denial-of-service-attack on any app using npm:cumulative-distribution-function v1.0.3 or earlier if the attacker can supply malformed data to the library. The vulnerability could also manifest if a data source to be analyzed changes data type from Arrays of number (proper) to Arrays of string (invalid, but undetected by earlier version of the library). Users should upgrade to at least v2.0.0, or the latest version. Tests for several types of invalid data have been created, and version 2.0.0 has been tested to reject this invalid data by throwing a `TypeError()` instead of processing it. Developers using this library may wish to adjust their app's code slightly to better tolerate or handle this TypeError. Apps performing proper numeric data validation before sending data to this library should be mostly unaffected by this patch. The vulnerability can be mitigated in older versions by ensuring that only finite numeric data of type `Array[number]` or `number` is passed to `cumulative-distribution-function` and its `f(x)` function, respectively.

Sydent is a reference Matrix identity server. Sydent does not limit the size of requests it receives from HTTP clients. A malicious user could send an HTTP request with a very large body, leading to memory exhaustion and denial of service. Sydent also does not limit response size for requests it makes to remote Matrix homeservers. A malicious homeserver could return a very large response, again leading to memory exhaustion and denial of service. This affects any server which accepts registration requests from untrusted clients. This issue has been patched by releases 89071a1, 0523511, f56eee3. As a workaround request sizes can be limited in an HTTP reverse-proxy. There are no known workarounds for the problem with overlarge responses.

ATTO FibreBridge 7500N firmware version 2.95 is susceptible to a vulnerability which allows attackers to cause a Denial of Service (DoS).

The broker application in IBM BigFix Remote Control before 9.1.3 allows remote attackers to cause a denial of service via an invalid HTTP request.

There is a reachable abort in the function jpc_dec_process_sot in libjasper/jpc/jpc_dec.c of JasPer 2.0.14 that will lead to a remote denial of service attack by triggering an unexpected jas_alloc2 return value, a different vulnerability than CVE-2017-13745.

Pillow before 8.1.2 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

VicFTPS 5.0 allows remote attackers to cause a denial of service (crash) via a LIST command that starts with a "/\/" (forward slash, backward slash, forward slash). NOTE: this might be the same issue as CVE-2008-2031.

In Wireshark 2.4.0 to 2.4.5 and 2.2.0 to 2.2.13, the LWAPP dissector could crash. This was addressed in epan/dissectors/packet-lwapp.c by limiting the encapsulation levels to restrict the recursion depth.

S.T.A.L.K.E.R.: Shadow of Chernobyl 1.0006 and earlier allows remote attackers to cause a denial of service (crash) via a long nickname, which triggers an exception.

GE UR firmware versions prior to version 8.1x web server task does not properly handle receipt of unsupported HTTP verbs, resulting in the web server becoming temporarily unresponsive after receiving a series of unsupported HTTP requests. When unresponsive, the web server is inaccessible. By itself, this is not particularly significant as the relay remains effective in all other functionality and communication channels.

Pillow before 8.1.2 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for a BLP container, and thus an attempted memory allocation can be very large.

Improper Input Validation vulnerability in Hitachi ABB Power Grids Relion 670 Series, Relion 670/650 Series, Relion 670/650/SAM600-IO, Relion 650, REB500, RTU500 Series, FOX615 (TEGO1), MSM, GMS600, PWC600 allows an attacker with access to the IEC 61850 network with knowledge of how to reproduce the attack, as well as the IP addresses of the different IEC 61850 access points (of IEDs/products), to force the device to reboot, which renders the device inoperable for approximately 60 seconds. This vulnerability affects only products with IEC 61850 interfaces. This issue affects: Hitachi ABB Power Grids Relion 670 Series 1.1; 1.2.3 versions prior to 1.2.3.20; 2.0 versions prior to 2.0.0.13; 2.1; 2.2.2 versions prior to 2.2.2.3; 2.2.3 versions prior to 2.2.3.2. Hitachi ABB Power Grids Relion 670/650 Series 2.2.0 versions prior to 2.2.0.13. Hitachi ABB Power Grids Relion 670/650/SAM600-IO 2.2.1 versions prior to 2.2.1.6. Hitachi ABB Power Grids Relion 650 1.1; 1.2; 1.3 versions prior to 1.3.0.7. Hitachi ABB Power Grids REB500 7.3; 7.4; 7.5; 7.6; 8.2; 8.3. Hitachi ABB Power Grids RTU500 Series 7.x version 7.x and prior versions; 8.x version 8.x and prior versions; 9.x version 9.x and prior versions; 10.x version 10.x and prior versions; 11.x version 11.x and prior versions; 12.x version 12.x and prior versions. Hitachi ABB Power Grids FOX615 (TEGO1) R1D02 version R1D02 and prior versions. Hitachi ABB Power Grids MSM 2.1.0 versions prior to 2.1.0. Hitachi ABB Power Grids GMS600 1.3.0 version 1.3.0 and prior versions. Hitachi ABB Power Grids PWC600 1.0 versions prior to 1.0.1.4; 1.1 versions prior to 1.1.0.1.

SilverSHielD 1.0.2.34 allows remote attackers to cause a denial of service (application crash) via a crafted argument to the opendir SFTP command.

An issue was discovered on FiberHome HG6245D devices through RP2613. It is possible to crash the telnet daemon by sending a certain 0a 65 6e 61 62 6c 65 0a 02 0a 1a 0a string.

Oryx Embedded CycloneTCP 1.7.6 to 2.0.0, fixed in 2.0.2, is affected by incorrect input validation, which may cause a denial of service (DoS). To exploit the vulnerability, an attacker needs to have TCP connectivity to the target system. Receiving a maliciously crafted TCP packet from an unauthenticated endpoint is sufficient to trigger the bug.

An issue was discovered in Joomla! 2.5.0 through 3.9.27. Missing validation of input could lead to a broken usergroups table.

The Scanner File Utility (aka listener) in Kyocera Mita (KM) 3.3.0.1 allows remote attackers to cause a denial of service (hang or crash) via invalid field length values in a malformed (1) document or (2) request.

NoticeWare Email Server NG 5.1.2.2 allows remote attackers to cause a denial of service (crash) via multiple POP3 requests with a long PASS command.

The HTML parser in KDE Konqueror 3.5.9 allows remote attackers to cause a denial of service (application crash) via a font tag with a long color value, which triggers an assertion error.

Systematic SitaWare 6.4 SP2 does not validate input from other sources sufficiently. e.g., information utilizing the NVG interface. An attacker can freeze the Situational Layer, which means that the Situational Picture is no longer updated. Unfortunately, the user cannot notice until he tries to work with that layer.

Squid 3.x before 3.5.15 and 4.x before 4.0.7 does not properly append data to String objects, which allows remote servers to cause a denial of service (assertion failure and daemon exit) via a long string, as demonstrated by a crafted HTTP Vary header.

In Wireshark 2.4.0 to 2.4.5, the TCP dissector could crash. This was addressed in epan/dissectors/packet-tcp.c by preserving valid data sources.

ntpd in ntp 4.2.8p10, 4.2.8p11, 4.2.8p12 and 4.2.8p13 allow remote attackers to prevent a broadcast client from synchronizing its clock with a broadcast NTP server via soofed mode 3 and mode 5 packets. The attacker must either be a part of the same broadcast network or control a slave in that broadcast network that can capture certain required packets on the attacker's behalf and send them to the attacker.

An issue was discovered on AXIS M1033-W (IP camera) Firmware version 5.40.5.1 devices. They don't employ a suitable mechanism to prevent a DoS attack, which leads to a response time delay. An attacker can use the hping3 tool to perform an IPv4 flood attack, and the services are interrupted from attack start to end.

The Stars Rating WordPress plugin before 3.5.1 does not validate the submitted rating, allowing submission of long integer, causing a Denial of Service in the comments section, or pending comment dashboard depending if the user sent it as unauthenticated or authenticated.

In Wireshark 2.4.0 to 2.4.5 and 2.2.0 to 2.2.13, the IEEE 802.15.4 dissector could crash. This was addressed in epan/dissectors/packet-ieee802154.c by ensuring that an allocation step occurs.

The Stealth endpoint in Unisys Stealth SVG 2.8.x, 3.0.x before 3.0.1999, 3.1.x, 3.2.x before 3.2.030, and 3.3.x before 3.3.016, when running on Linux and AIX, allows remote attackers to cause a denial of service (crash) via crafted packets.

NTSServerSvc.exe in the server in Softros Network Time System 2.3.4 allows remote attackers to cause a denial of service (daemon crash) by sending exactly 11 bytes.

SEGGER FTP Server for Windows before 3.22a allows remote attackers to cause a denial of service (daemon crash) via an invalid LIST, STOR, or RETR command.

An issue was discovered in the web server in Flexense SyncBreeze Enterprise 10.6.24. There is a user mode write access violation on the syncbrs.exe memory region that can be triggered by rapidly sending a variety of HTTP requests with long HTTP header values or long URIs.

A Denial of Service vulnerability was found in Apache Qpid Broker-J versions 7.0.0-7.0.4 when AMQP protocols 0-8, 0-9 or 0-91 are used to publish messages with size greater than allowed maximum message size limit (100MB by default). The broker crashes due to the defect. AMQP protocols 0-10 and 1.0 are not affected.