The Create Discoveries feature of Open-AudIT before 3.2.0 allows an authenticated attacker to execute arbitrary OS commands via a crafted value for a URL field.

EyesOfNetwork 5.1 allows Remote Command Execution via shell metacharacters in the module/tool_all/ host field.

Command injection in PAN-0S 9.0.2 and earlier may allow an authenticated attacker to gain access to a remote shell in PAN-OS, and potentially run with the escalated user’s permissions.

MantisBT before 1.3.20 and 2.22.1 allows Post Authentication Command Injection, leading to Remote Code Execution.

A problem was found in Centreon Web through 19.04.3. An authenticated command injection is present in the page include/configuration/configObject/traps-mibs/formMibs.php. This page is called from the Centreon administration interface. This is the mibs management feature that contains a file filing form. At the time of submission of a file, the mnftr parameter is sent to the page and is not filtered properly. This allows one to inject Linux commands directly.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this vulnerability is the function um_red of the file /goform/RP_setBasicAuto. The manipulation of the argument hname leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The traceroute function on the TP-Link TL-WR840N v4 router with firmware through 0.9.1 3.16 is vulnerable to remote code execution via a crafted payload in an IP address input field.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the TCP Ports To Open in Add Gaming Rule.

In OrangeHRM 4.3.1 and before, there is an input validation error within admin/listMailConfiguration (txtSendmailPath parameter) that allows authenticated attackers to achieve arbitrary command execution.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the IP Address in Add Virtual Server.

In Pulse Secure Pulse Connect Secure version 9.0RX before 9.0R3.4, 8.3RX before 8.3R7.1, 8.2RX before 8.2R12.1, and 8.1RX before 8.1R15.1 and Pulse Policy Secure version 9.0RX before 9.0R3.2, 5.4RX before 5.4R7.1, 5.3RX before 5.3R12.1, 5.2RX before 5.2R12.1, and 5.1RX before 5.1R15.1, the admin web interface allows an authenticated attacker to inject and execute commands.

An issue was discovered in ONAP SDNC before Dublin. By executing sla/printAsXml with a crafted module parameter, an authenticated user can execute an arbitrary command. All SDC setups that include admportal are affected.

A vulnerability, which was classified as critical, was found in Netgear D6400 1.0.0.114. This affects an unknown part of the file diag.cgi. The manipulation of the argument host_name leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early and confirmed the existence of the vulnerability. They reacted very quickly, professional and kind. This vulnerability only affects products that are no longer supported by the maintainer.

Multiple camera devices by UDP Technology, Geutebrück and other vendors are vulnerable to command injection, which may allow an attacker to remotely execute arbitrary code.

A privilege escalation vulnerability exists in SolarWinds Serv-U before 15.1.7 for Linux.

An issue was discovered in ONAP SDNC before Dublin. By executing sla/printAsGv with a crafted module parameter, an authenticated user can execute an arbitrary command. All SDC setups that include admportal are affected.

The parameters $cache_path, $wp_cache_debug_ip, $wp_super_cache_front_page_text, $cache_scheduled_time, $cached_direct_pages used in the settings of WP Super Cache WordPress plugin before 1.7.3 result in RCE because they allow input of '$' and '\n'. This is due to an incomplete fix of CVE-2021-24209.

HARMAN AMX MVP5150 v2.87.13 devices allow remote OS Command Injection.

Grandstream GXV3611IR_HD before 1.0.3.23 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the /goform/systemlog?cmd=set logserver field.

An issue was discovered in LibreNMS through 1.47. There is a command injection vulnerability in html/includes/graphs/device/collectd.inc.php where user supplied parameters are filtered with the mysqli_escape_real_string function. This function is not the appropriate function to sanitize command arguments as it does not escape a number of command line syntax characters such as ` (backtick), allowing an attacker to inject commands into the variable $rrd_cmd, which gets executed via passthru().

Shell Metacharacter Injection in the package installer on Zyxel NAS 326 version 5.21 and below allows an authenticated attacker to execute arbitrary code via multiple different requests.

WebAccess/NMS (versions prior to 3.0.2) does not properly sanitize user input and may allow an attacker to inject system commands remotely.

Grandstream GWN7610 before 1.0.8.18 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the filename in a /ubus/controller.icc.update_nds_webroot_from_tmp update_nds_webroot_from_tmp API call.

Jenkins Git Client Plugin 2.8.4 and earlier and 3.0.0-rc did not properly restrict values passed as URL argument to an invocation of 'git ls-remote', resulting in OS command injection.

Grandstream GXV3370 before 1.0.1.41 and WP820 before 1.0.3.6 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in a /manager?action=getlogcat priority field.

programs/pluto/xauth.c in the client in Openswan 2.6.26 through 2.6.28 allows remote authenticated gateways to execute arbitrary commands via shell metacharacters in the cisco_banner (aka server_banner) field, a different vulnerability than CVE-2010-3308.

This affects the package killport before 1.0.2. If (attacker-controlled) user input is given, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization. Running this PoC will cause the command touch success to be executed, leading to the creation of a file called success.

In the EyesOfNetwork web interface (aka eonweb) 5.1-0, module\tool_all\tools\snmpwalk.php does not properly restrict popen calls, which allows remote attackers to execute arbitrary commands via shell metacharacters in a parameter.

T&W WIFI Repeater BE126 allows remote authenticated users to execute arbitrary code via shell metacharacters in the user parameter to cgi-bin/webupg.

A vulnerability, which was classified as critical, has been found in TOTOLINK N200RE 9.3.5u.6095_B20200916/9.3.5u.6139_B20201216. Affected by this issue is the function sub_41A0F8 of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument Hostname leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in TBK DVR-4104 and DVR-4216 up to 20240412 and classified as critical. This issue affects some unknown processing of the file /device.rsp?opt=sys&cmd=___S_O_S_T_R_E_A_MAX___. The manipulation of the argument mdb/mdc leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-260573 was assigned to this vulnerability.

The EyesOfNetwork web interface (aka eonweb) 5.1-0 allows remote command execution via shell metacharacters in a hosts_cacti array parameter to module/admin_device/index.php.

In the EyesOfNetwork web interface (aka eonweb) 5.1-0, module\tool_all\tools\interface.php does not properly restrict exec calls, which allows remote attackers to execute arbitrary commands via shell metacharacters in the host_list parameter to module/tool_all/select_tool.php.

A vulnerability was found in TamronOS up to 20230703. It has been classified as critical. This affects an unknown part of the file /api/ping. The manipulation of the argument host leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-233475. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 11 of 46).

A vulnerability was found in TOTOLINK CA300-PoE 6.2c.884. It has been declared as critical. Affected by this vulnerability is the function setUpgradeFW of the file upgrade.so. The manipulation of the argument FileName leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 9 of 46).

IBM Security Guardium 10.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 124633.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001 and classified as critical. Affected by this issue is the function RP_checkFWByBBS of the file /goform/RP_checkFWByBBS. The manipulation of the argument type/ch/ssidhex/security/extch/pwd/mode/ip/nm/gw leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001 and classified as critical. Affected by this vulnerability is the function RP_UpgradeFWByBBS of the file /goform/RP_UpgradeFWByBBS. The manipulation of the argument type/ch/ssidhex/security/extch/pwd/mode/ip/nm/gw leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This issue affects the function RP_pingGatewayByBBS of the file /goform/RP_pingGatewayByBBS. The manipulation of the argument ip/nm/gw leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in mannaandpoem OpenManus up to 2025.3.13. This affects an unknown part of the file app/tool/python_execute.py of the component Prompt Handler. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been classified as critical. Affected is the function setSystemAdmin of the file /setSystemAdmin. The manipulation of the argument AdminID leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical has been found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function NTP of the file /goform/NTP. The manipulation of the argument manual_year_select/manual_month_select/manual_day_select/manual_hour_select/manual_min_select/manual_sec_select leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

In some Lenovo ThinkServer-branded servers, a command injection vulnerability exists in the BMC firmware download command. This allows a privileged user to download and execute arbitrary code inside the BMC. This can only be exploited by authorized privileged users.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been rated as critical. Affected by this issue is the function verifyFacebookLike of the file /goform/verifyFacebookLike. The manipulation of the argument uid/accessToken leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This vulnerability affects the function setDeviceURL of the file /goform/setDeviceURL. The manipulation of the argument DeviceURL leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Command injection vulnerability in Trend Micro Smart Protection Server (Standalone) 3.1 and 3.2 server administration UI allows attackers with authenticated access to execute arbitrary code on vulnerable installations.

A vulnerability has been found in Oiwtech OIW-2431APGN-HP 2.5.3-B20131128 and classified as critical. This vulnerability affects unknown code of the file /boafrm/formScript of the component Personal Script Submenu. The manipulation leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in WeiYe-Jing datax-web 2.1.1. It has been classified as critical. This affects an unknown part of the file /api/job/add/. The manipulation of the argument glueSource leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.