This vulnerability allows remote attackers to bypass authentication on vulnerable installations of Quest NetVault Backup 11.2.0.13. The specific flaw exists within JSON RPC Request handling. By setting the checksession parameter to a specific value, it is possible to bypass authentication to critical functions. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-4752.

An authentication bypass flaw was found in the smart_proxy_dynflow component used by Foreman. A malicious attacker can use this flaw to remotely execute arbitrary commands on machines managed by vulnerable Foreman instances, in a highly privileged context.

Martem TELEM GW6 and GWM devices with firmware 2018.04.18-linux_4-01-601cb47 and prior do not perform authentication of IEC-104 control commands, which may allow a rogue node a remote control of the industrial process.

openshift-ansible before versions 3.9.23, 3.7.46 deploys a misconfigured etcd file that causes the SSL client certificate authentication to be disabled. Quotations around the values of ETCD_CLIENT_CERT_AUTH and ETCD_PEER_CLIENT_CERT_AUTH in etcd.conf result in etcd being configured to allow remote users to connect without any authentication if they can access the etcd server bound to the network on the master nodes. An attacker could use this flaw to read and modify all the data about the Openshift cluster in the etcd datastore, potentially adding another compute node, or bringing down the entire cluster.

Meross MSS110 devices through 1.1.24 contain an unauthenticated admin.htm administrative interface.

For Crestron TSW-X60 version prior to 2.001.0037.001 and MC3 version prior to 1.502.0047.001, The devices are shipped with authentication disabled, and there is no indication to users that they need to take steps to enable it. When compromised, the access to the CTP console is left open.

Java remote method invocation (RMI) input port in GE MDS PulseNET and MDS PulseNET Enterprise version 3.2.1 and prior may be exploited to allow unauthenticated users to launch applications and support remote code execution through web services.

Grafana 2.x, 3.x, and 4.x before 4.6.4 and 5.x before 5.2.3 allows authentication bypass because an attacker can generate a valid "remember me" cookie knowing only a username of an LDAP or OAuth user.

Session fixation vulnerability in Mambo 4.6.2 CMS allows remote attackers to hijack web sessions by setting the Cookie parameter.

Entes EMG12 versions 2.57 and prior The application uses a web interface where it is possible for an attacker to bypass authentication with a specially crafted URL. This could allow for remote code execution.

A remote attacker could bypass the Sandstorm organization restriction before build 0.203 via a comma in an email-address field.

A vulnerability in the password recovery function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of a password recovery request. An attacker could exploit this vulnerability by submitting a password recovery request and changing the password for any user on an affected system. An exploit could allow the attacker to gain administrative-level privileges on the affected system. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd07253.

INplc-RT 3.08 and earlier allows remote attackers to bypass authentication to execute an arbitrary command through the protocol-compliant traffic. This is a different vulnerability than CVE-2018-0670.

A vulnerability in the API gateway of the Cisco Digital Network Architecture (DNA) Center could allow an unauthenticated, remote attacker to bypass authentication and access critical services. The vulnerability is due to a failure to normalize URLs prior to servicing requests. An attacker could exploit this vulnerability by submitting a crafted URL designed to exploit the issue. A successful exploit could allow the attacker to gain unauthenticated access to critical services, resulting in elevated privileges in DNA Center. This vulnerability affects Cisco DNA Center Software Releases prior to 1.1.2. Cisco Bug IDs: CSCvi09394.

A vulnerability in Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to access the Java Remote Method Invocation (RMI) system. The vulnerability is due to an open port in the Network Interface and Configuration Engine (NICE) service. An attacker could exploit this vulnerability by accessing the open RMI system on an affected PCP instance. An exploit could allow the attacker to perform malicious actions that affect PCP and the devices that are connected to it. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd61746.

Soreco Xpert.Line 3.0 allows local users to spoof users and consequently gain privileges by intercepting a Windows API call.

A vulnerability has been identified in SIMATIC IT LMS (All versions), SIMATIC IT Production Suite (Versions V7.1 < V7.1 Upd3), SIMATIC IT UA Discrete Manufacturing (Versions < V1.2), SIMATIC IT UA Discrete Manufacturing (Versions V1.2), SIMATIC IT UA Discrete Manufacturing (Versions V1.3), SIMATIC IT UA Discrete Manufacturing (Versions V2.3), SIMATIC IT UA Discrete Manufacturing (Versions V2.4). An attacker with network access to the installation could bypass the application-level authentication. In order to exploit the vulnerability, an attacker must obtain network access to an affected installation and must obtain a valid username to the system. Successful exploitation requires no user privileges and no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this vulnerability was known.

The TLS session cache in FreeRADIUS 2.1.1 through 2.1.7, 3.0.x before 3.0.14, 3.1.x before 2017-02-04, and 4.0.x before 2017-02-04 fails to reliably prevent resumption of an unauthenticated session, which allows remote attackers (such as malicious 802.1X supplicants) to bypass authentication via PEAP or TTLS.

An insecure SSHD configuration in Juniper Device Manager (JDM) and host OS on Juniper NFX Series devices may allow remote unauthenticated access if any of the passwords on the system are empty. The affected SSHD configuration has the PermitEmptyPasswords option set to "yes". Affected releases are Juniper Networks Junos OS: 18.1 versions prior to 18.1R4 on NFX Series.

NetIQ eDirectory before 9.0 SP4 did not enforce login restrictions when "ebaclient" was used, allowing unpermitted access to eDirectory services.

Kguard Digital Video Recorder 104, 108, v2 does not have any authorization or authentication between an ActiveX client and the application server.

An authentication bypass vulnerability in the Panorama context switching feature allows an attacker with network access to a Panorama's management interface to gain privileged access to managed firewalls. An attacker requires some knowledge of managed firewalls to exploit this issue. This issue does not affect Panorama configured with custom certificates authentication for communication between Panorama and managed devices. This issue affects: PAN-OS 7.1 versions earlier than 7.1.26; PAN-OS 8.1 versions earlier than 8.1.12; PAN-OS 9.0 versions earlier than 9.0.6; All versions of PAN-OS 8.0.

D-Link DIR-615 Wireless N 300 Router allows authentication bypass via a modified POST request to login.cgi. This issue occurs because it fails to validate the password field. Successful exploitation of this issue allows an attacker to take control of the affected device.

EMC NetWorker may potentially be vulnerable to an unauthenticated remote code execution vulnerability in the Networker Client execution service (nsrexecd) when oldauth authentication method is used. An unauthenticated remote attacker could send arbitrary commands via RPC service to be executed on the host system with the privileges of the nsrexecd service, which runs with administrative privileges.

Missing authentication for the remote configuration port 1236/tcp on the Cohu 3960HD allows an attacker to change configuration parameters such as IP address and username/password via specially crafted XML SOAP packets.

A Use of Client-Side Authentication issue was discovered in Advantech B+B SmartWorx MESR901 firmware versions 1.5.2 and prior. The web interface uses JavaScript to check client authentication and redirect unauthorized users. Attackers may intercept requests and bypass authentication to access restricted web pages.

Wi2be SMART HP WMT R1.2.20_201400922 allows unauthorized remote attackers to reset the admin password via the /ConfigWizard/ChangePwd.esp?2admin URL (Attackers can login using the "admin" username with password "admin" after a successful attack).

A lack of authentication, in CA Unified Infrastructure Management 8.5.1, 8.5, and 8.4.7, allows remote attackers to conduct a variety of attacks, including file reading/writing.

In the Secure File System in all Android releases from CAF using the Linux kernel, a capture-replay vulnerability could potentially exist.

In ABB IP GATEWAY 3.39 and prior, by accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to access the configuration files and application pages without authentication.

An issue was discovered in dnaTools dnaLIMS 4-2015s13. dnaLIMS is vulnerable to unauthenticated command execution through an improperly protected administrative web shell (cgi-bin/dna/sysAdmin.cgi POST requests).

The WebUI of PHOENIX CONTACT FL SWITCH 3xxx, 4xxx, 48xx versions prior to 1.35 is vulnerable to brute-force attacks, because of Improper Restriction of Excessive Authentication Attempts.

A vulnerability in the authentication module of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass local authentication. The vulnerability is due to improper handling of authentication requests and policy assignment for externally authenticated users. An attacker could exploit this vulnerability by authenticating with a valid external user account that matches an internal username and incorrectly receiving the authorization policy of the internal account. An exploit could allow the attacker to have Super Admin privileges for the ISE Admin portal. This vulnerability does not affect endpoints authenticating to the ISE. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance running Release 1.3, 1.4, 2.0.0, 2.0.1, or 2.1.0. Release 2.2.x is not affected. Cisco Bug IDs: CSCvb10995.

On TP-Link TL-WR841N v13 00000001 0.9.1 4.16 v0001.0 Build 171019 Rel.55346n devices, all actions in the web interface are affected by bypass of authentication via an HTTP request.

ASUS HG100 devices with firmware before 1.05.12 allow unauthenticated access, leading to remote command execution.

Improper Authentication vulnerability in the "LDAP / SSO Authentication" (ig_ldap_sso_auth) extension 2.0.0 for TYPO3.

The web interface on Dahua DHI-HCVR7216A-S3 devices with NVR Firmware 3.210.0001.10 2016-06-06, Camera Firmware 2.400.0000.28.R 2016-03-29, and SmartPSS Software 1.16.1 2017-01-19 allows remote attackers to obtain login access by leveraging knowledge of the MD5 Admin Hash without knowledge of the corresponding password, a different vulnerability than CVE-2013-6117.

The custom authentication realm used by karaf-tomcat's "opendaylight" realm in Opendaylight before Helium SR3 will authenticate any username and password combination.

An issue was discovered in WildFly 10.1.2.Final. It is possible for an attacker to access the administration panel on TCP port 9990 without any authentication using "anonymous" access that is automatically created. Once logged in, a misconfiguration present by default (auto-deployment) permits an anonymous user to deploy a malicious .war file, leading to remote code execution. NOTE: the vendor indicates that anonymous access is not available in the default installation; however, it remains optional because there are several use cases for it, including development environments and network architectures that have a proxy server for access control to the WildFly server

SAP BusinessObjects Edge 4.1 allows remote attackers to obtain the SI_PLATFORM_SEARCH_SERVER_LOGON_TOKEN token and consequently gain SYSTEM privileges via vectors involving CORBA calls, aka SAP Note 2039905.

A vulnerability in the password reset function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of a password reset request. An attacker could exploit this vulnerability by submitting a password reset request and changing the password for any user on an affected system. An exploit could allow the attacker to gain administrative-level privileges on the affected system. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd07245.

A vulnerability in the authentication functionality of the web-based service portal of Cisco Elastic Services Controller Software could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrator privileges on an affected system. The vulnerability is due to improper security restrictions that are imposed by the web-based service portal of the affected software. An attacker could exploit this vulnerability by submitting an empty password value to an affected portal when prompted to enter an administrative password for the portal. A successful exploit could allow the attacker to bypass authentication and gain administrator privileges for the web-based service portal of the affected software. This vulnerability affects Cisco Elastic Services Controller Software Release 3.0.0. Cisco Bug IDs: CSCvg29809.

INplc-RT 3.08 and earlier allows remote attackers to bypass authentication to execute an arbitrary command through the protocol-compliant traffic. This is a different vulnerability than CVE-2018-0669.

Netsweeper before 4.0.5 allows remote attackers to bypass authentication and create arbitrary accounts and policies via a request to webadmin/nslam/index.php.

A vulnerability was discovered in Siemens SiPass integrated (All versions before V2.70) that could allow an attacker with network access to the SiPass integrated server to bypass the authentication mechanism and perform administrative operations.

The Client Filter Admin portal in Netsweeper before 3.1.10, 4.0.x before 4.0.9, and 4.1.x before 4.1.2 allows remote attackers to bypass authentication and subsequently create arbitrary profiles via a showdeny action to the default URL.

The National Payments Corporation of India BHIM application 1.3 for Android uses a custom keypad for which the input element is available to the Accessibility service, which makes it easier for attackers to bypass authentication.

If RSH service is enabled on Junos OS and if the PAM authentication is disabled, a remote unauthenticated attacker can obtain root access to the device. RSH service is disabled by default on Junos. There is no documented CLI command to enable this service. However, an undocumented CLI command allows a privileged Junos user to enable RSH service and disable PAM, and hence expose the system to unauthenticated root access. When RSH is enabled, the device is listing to RSH connections on port 514. This issue is not exploitable on platforms where Junos release is based on FreeBSD 10+. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D77 on SRX Series; 12.3 versions prior to 12.3R12-S10; 12.3X48 versions prior to 12.3X48-D75 on SRX Series; 14.1X53 versions prior to 14.1X53-D47 on QFX/EX Series; 15.1 versions prior to 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D131, 15.1X49-D140 on SRX Series; 15.1X53 versions prior to 15.1X53-D59 on EX2300/EX3400 Series; 15.1X53 versions prior to 15.1X53-D67 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D471, 15.1X53-D490 on NFX Series; 16.1 versions prior to 16.1R3-S9, 16.1R4-S9, 16.1R5-S4, 16.1R6-S4, 16.1R7; 16.2 versions prior to 16.2R2-S5; 17.1 versions prior to 17.1R1-S7, 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S6, 17.2R2-S4, 17.2R3; 17.2X75 versions prior to 17.2X75-D110, 17.2X75-D91; 17.3 versions prior to 17.3R1-S4, 17.3R2-S2, 17.3R3; 17.4 versions prior to 17.4R1-S3, 17.4R2; 18.2X75 versions prior to 18.2X75-D5.

The check_login function in D-Link DNR-326 before 2.10 build 03 allows remote attackers to bypass authentication and log in by setting the username cookie parameter to an arbitrary string.

The National Payments Corporation of India BHIM application 1.3 for Android does not properly restrict use of the OTP feature, which makes it easier for attackers to bypass authentication.