An issue was discovered in Foxit Reader and PhantomPDF before 9.7.2. It allows resource consumption via crafted cross-reference stream data.
A Denial of Service (DoS) vulnerability in the multipart request boundary processing mechanism of eosphoros-ai/db-gpt v0.6.0 allows unauthenticated attackers to cause excessive resource consumption. The server fails to handle excessive characters appended to the end of multipart boundaries, leading to an infinite loop and complete denial of service for all users. This vulnerability affects all endpoints processing multipart/form-data requests.
A Denial of Service (DoS) vulnerability in the multipart request boundary processing mechanism of the Invoke-AI server (version v5.0.1) allows unauthenticated attackers to cause excessive resource consumption. The server fails to handle excessive characters appended to the end of multipart boundaries, leading to an infinite loop and a complete denial of service for all users. The affected endpoint is `/api/v1/images/upload`.
The Library API in buger jsonparser through 2019-12-04 allows attackers to cause a denial of service (infinite loop) via a Delete call.
pmm-server in Percona Monitoring and Management (PMM) 2.2.x before 2.2.1 allows unauthenticated denial of service.
A denial of service issue was addressed with improved input validation.
Infinite loop in Read in crypto/rand before Go 1.17.11 and Go 1.18.3 on Windows allows attacker to cause an indefinite hang by passing a buffer larger than 1 << 32 - 1 bytes.
An FR-GV-302 issue in FreeRADIUS 3.x before 3.0.15 allows "Infinite loop and memory exhaustion with 'concat' attributes" and a denial of service.
The Candid library causes a Denial of Service while parsing a specially crafted payload with 'empty' data type. For example, if the payload is `record { * ; empty }` and the canister interface expects `record { * }` then the Rust candid decoder treats empty as an extra field required by the type. The problem with the type empty is that the candid Rust library wrongly categorizes empty as a recoverable error when skipping the field and thus causing an infinite decoding loop. Canisters using affected versions of candid are exposed to denial of service by causing the decoding to run indefinitely until the canister traps due to reaching maximum instruction limit per execution round. Repeated exposure to the payload will result in degraded performance of the canister. Note: Canisters written in Motoko are unaffected.
An FR-GV-303 issue in FreeRADIUS 3.x before 3.0.15 allows "DHCP - Infinite read in dhcp_attr2vp()" and a denial of service.
USG9500 with versions of V500R001C30;V500R001C60 have a denial of service vulnerability. Due to a flaw in the X.509 implementation in the affected products which can result in an infinite loop, an attacker may exploit the vulnerability via a malicious certificate to perform a denial of service attack on the affected products.
An issue was discovered in the demo/LINUXTCP implementation of cwalter-at freemodbus v.2018-09-12 allowing attackers to reach an infinite loop via a crafted length value for a packet.
A denial-of-service vulnerability exists in the processing of multi-part/form-data requests in the base GoAhead web server application in versions v5.0.1, v.4.1.1 and v3.6.5. A specially crafted HTTP request can lead to an infinite loop in the process. The request can be unauthenticated in the form of GET or POST requests and does not require the requested resource to exist on the server.
An improperly performed length calculation on a buffer in PlaintextRecordLayer could lead to an infinite loop and denial-of-service based on user input. This issue affected versions of fizz prior to v2019.03.04.00.
An exploitable denial-of-service vulnerability exists in the Dicom-packet parsing functionality of LEADTOOLS libltdic.so version 20.0.2019.3.15. A specially crafted packet can cause an infinite loop, resulting in a denial of service. An attacker can send a packet to trigger this vulnerability.
Openwsman, versions up to and including 2.6.9, are vulnerable to infinite loop in process_connection() when parsing specially crafted HTTP requests. A remote, unauthenticated attacker can exploit this vulnerability by sending malicious HTTP request to cause denial of service to openwsman server.
Vulnerability in LimeSurvey 6.13.0 in the endpoint /optin that causes infinite HTTP redirects when accessed directly. This behavior can be exploited to generate a Denegation of Service (DoS attack), by exhausting server or client resources. The system is unable to break the redirect loop, which can cause service degradation or browser instability.
Unbound before 1.9.5 allows an infinite loop via a compressed name in dname_pkt_copy. NOTE: The vendor disputes that this is a vulnerability. Although the code may be vulnerable, a running Unbound installation cannot be remotely or locally exploited
In Jp2Image::readMetadata() in jp2image.cpp in Exiv2 0.27.2, an input file can result in an infinite loop and hang, with high CPU consumption. Remote attackers could leverage this vulnerability to cause a denial of service via a crafted file.
While processing Attach Reject message, Valid exit condition is not met resulting into an infinite loop in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8096AU, APQ8098, MDM9150, MDM9205, MDM9206, MDM9607, MDM9615, MDM9625, MDM9635M, MDM9640, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8976, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, SC8180X, SDA660, SDA845, SDM429, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX55, SM6150, SM7150, SM8150, SM8250, Snapdragon_High_Med_2016, SXR1130, SXR2130
In Lib/tarfile.py in Python through 3.8.3, an attacker is able to craft a TAR archive leading to an infinite loop when opened by tarfile.open, because _proc_pax lacks header validation.
Tenda PA6 Wi-Fi Powerline extender 1.0.1.21 is vulnerable to a denial of service, caused by an error in the "homeplugd" process. By sending a specially crafted UDP packet, an attacker could exploit this vulnerability to cause the device to reboot.
The validators package 0.12.2 through 0.12.5 for Python enters an infinite loop when validators.domain is called with a crafted domain string. This is fixed in 0.12.6.
ise smart connect KNX Vaillant 1.2.839 contain a Denial of Service.
Improper Check for filenames with overly long extensions in PostMaster (sending in email) or uploading files (e.g. attaching files to mails) of ((OTRS)) Community Edition and OTRS allows an remote attacker to cause an endless loop. This issue affects: OTRS AG: ((OTRS)) Community Edition 5.0.x version 5.0.38 and prior versions; 6.0.x version 6.0.23 and prior versions. OTRS AG: OTRS 7.0.x version 7.0.12 and prior versions.
Istio 1.3.x before 1.3.5 allows Denial of Service because continue_on_listener_filters_timeout is set to True, a related issue to CVE-2019-18836.
ProFTPD before 1.3.6b and 1.3.7rc before 1.3.7rc2 allows remote unauthenticated denial-of-service due to incorrect handling of overly long commands because main.c in a child process enters an infinite loop.
An issue was discovered in GitLab Community and Enterprise Edition 11 through 12.4 when building Nested GraphQL queries. It has a large or infinite loop.
In Wireshark 3.0.0 to 3.0.3 and 2.6.0 to 2.6.10, the Gryphon dissector could go into an infinite loop. This was addressed in plugins/epan/gryphon/packet-gryphon.c by checking for a message length of zero.
An issue was discovered in the Linux kernel before 5.0.4. The 9p filesystem did not protect i_size_write() properly, which causes an i_size_read() infinite loop and denial of service on SMP systems.
A flaw was found in the way HAProxy processed HTTP responses containing the "Set-Cookie2" header. This flaw could allow an attacker to send crafted HTTP response packets which lead to an infinite loop, eventually resulting in a denial of service condition. The highest threat from this vulnerability is availability.
Infinite loop in RTMPT protocol dissector in Wireshark 3.6.0 to 3.6.1 and 3.4.0 to 3.4.11 allows denial of service via packet injection or crafted capture file
BT SDP dissector infinite loop in Wireshark 4.0.0 to 4.0.7 and 3.6.0 to 3.6.15 allows denial of service via packet injection or crafted capture file
An Improperly Implemented Security Check for Standard vulnerability in storm control of Juniper Networks Junos OS QFX5k devices allows packets to be punted to ARP queue causing a l2 loop resulting in a DDOS violations and DDOS syslog. This issue is triggered when Storm control is enabled and ICMPv6 packets are present on device. This issue affects Juniper Networks: Junos OS * All versions prior to 20.2R3-S6 on QFX5k; * 20.3 versions prior to 20.3R3-S5 on QFX5k; * 20.4 versions prior to 20.4R3-S5 on QFX5k; * 21.1 versions prior to 21.1R3-S4 on QFX5k; * 21.2 versions prior to 21.2R3-S3 on QFX5k; * 21.3 versions prior to 21.3R3-S2 on QFX5k; * 21.4 versions prior to 21.4R3 on QFX5k; * 22.1 versions prior to 22.1R3 on QFX5k; * 22.2 versions prior to 22.2R2 on QFX5k.
The RemoteAddr and LocalAddr methods on the returned net.Conn may call themselves, leading to an infinite loop which will crash the program due to a stack overflow.
Transient DOS while parsing IPv6 extension header when WLAN firmware receives an IPv6 packet that contains `IPPROTO_NONE` as the next header.
Certain WithSecure products allow an infinite loop in a scanning engine via unspecified file types. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, Linux Security 64 12.0 , Linux Protection 12.0, and WithSecure Atlant (formerly F-Secure Atlant) 1.0.35-1.
Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Sierra Wireless, Inc ALEOS could potentially allow a remote attacker to trigger a Denial of Service (DoS) condition for ACEManager without impairing other router functions. This condition is cleared by restarting the device.
Pion DTLS is a Go implementation of Datagram Transport Layer Security. Prior to version 2.1.4, an attacker can send packets that sends Pion DTLS into an infinite loop when processing. Version 2.1.4 contains a patch for this issue. There are currently no known workarounds available.
An infinite loop in OPC UA .NET Standard Stack 1.04.368 allows a remote attackers to cause the application to hang via a crafted message.
A Denial-of-Service (DoS) vulnerability was discovered in F-Secure & WithSecure products whereby the aegen.dll will go into an infinite loop when unpacking PE files. This eventually leads to scanning engine crash. The exploit can be triggered remotely by an attacker.
Go before 1.13.15 and 14.x before 1.14.7 can have an infinite read loop in ReadUvarint and ReadVarint in encoding/binary via invalid inputs.
An issue was discovered in picoTCP 1.7.0. The routine for processing the next header field (and deducing whether the IPv6 extension headers are valid) doesn't check whether the header extension length field would overflow. Therefore, if it wraps around to zero, iterating through the extension headers will not increment the current data pointer. This leads to an infinite loop and Denial-of-Service in pico_ipv6_check_headers_sequence() in pico_ipv6.c.
A vulnerability in the LangChainLLM class of the run-llama/llama_index repository, version v0.12.5, allows for a Denial of Service (DoS) attack. The stream_complete method executes the llm using a thread and retrieves the result via the get_response_gen method of the StreamingGeneratorCallbackHandler class. If the thread terminates abnormally before the _llm.predict is executed, there is no exception handling for this case, leading to an infinite loop in the get_response_gen function. This can be triggered by providing an input of an incorrect type, causing the thread to terminate and the process to continue running indefinitely.
In Wireshark 3.2.0 to 3.2.4, the GVCP dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-gvcp.c by ensuring that an offset increases in all situations.
Trustwave ModSecurity 3.x through 3.0.4 allows denial of service via a special request. NOTE: The discoverer reports "Trustwave has signaled they are disputing our claims." The CVE suggests that there is a security issue with how ModSecurity handles regular expressions that can result in a Denial of Service condition. The vendor does not consider this as a security issue because1) there is no default configuration issue here. An attacker would need to know that a rule using a potentially problematic regular expression was in place, 2) the attacker would need to know the basic nature of the regular expression itself to exploit any resource issues. It's well known that regular expression usage can be taxing on system resources regardless of the use case. It is up to the administrator to decide on when it is appropriate to trade resources for potential security benefit
Denial of service in modem due to infinite loop while parsing IGMPv2 packet from server in Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Voice & Music
An issue was discovered in MultiPartParser in Django 2.2 before 2.2.27, 3.2 before 3.2.12, and 4.0 before 4.0.2. Passing certain inputs to multipart forms could result in an infinite loop when parsing files.
Xerox VersaLink devices on specific versions of firmware before 2022-01-26 allow remote attackers to brick the device via a crafted TIFF file in an unauthenticated HTTP POST request. There is a permanent denial of service because image parsing causes a reboot, but image parsing is restarted as soon as the boot process finishes. However, this boot loop can be resolved by a field technician. The TIFF file must have an incomplete Image Directory. Affected firmware versions include xx.42.01 and xx.50.61. NOTE: the 2022-01-24 NeoSmart article included "believed to affect all previous and later versions as of the date of this posting" but a 2022-01-26 vendor statement reports "the latest versions of firmware are not vulnerable to this issue."
Junrar is an open source java RAR archive library. In affected versions A carefully crafted RAR archive can trigger an infinite loop while extracting said archive. The impact depends solely on how the application uses the library, and whether files can be provided by malignant users. The problem is patched in 7.4.1. There are no known workarounds and users are advised to upgrade as soon as possible.