Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in UD-LT2 firmware Ver.1.00.008_SE and earlier. If an attacker logs in to the affected product with an administrative account and manipulates requests for a certain screen operation, an arbitrary OS command may be executed. This vulnerability was reported on a different screen operation from CVE-2025-20617.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in UD-LT2 firmware Ver.1.00.008_SE and earlier. If an attacker logs in to the affected product with an administrative account and manipulates requests for a certain screen operation, an arbitrary OS command may be executed. This vulnerability was reported on a different screen operation from CVE-2025-26856.

UD-LT1 firmware Ver.2.1.9 and earlier and UD-LT1/EX firmware Ver.2.1.9 and earlier allow a remote authenticated attacker with an administrative account to execute arbitrary OS commands.

WN-G300R3 firmware 1.03 and earlier allows attackers with administrator rights to execute arbitrary OS commands via unspecified vectors.

Buffer overflow in I-O DATA DEVICE TS-WRLP firmware version 1.01.02 and earlier and TS-WRLA firmware version 1.01.02 and earlier allows an attacker with administrator rights to cause a denial-of-service (DoS) or execute arbitrary code via unspecified vectors.

Multiple I-O DATA network camera products (TS-WRLP firmware Ver.1.09.04 and earlier, TS-WRLA firmware Ver.1.09.04 and earlier, TS-WRLP/E firmware Ver.1.09.04 and earlier) use hardcoded credentials which may allow an remote authenticated attacker to execute arbitrary OS commands on the device via unspecified vector.

I-O DATA DEVICE WFS-SR01 firmware version 1.10 and earlier allow remote attackers to execute arbitrary OS commands via unspecified vectors.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in I-O DATA network attached hard disk 'HDL-T Series' firmware Ver.1.21 and earlier when 'Remote Link3 function' is enabled. If exploited, a remote unauthenticated attacker may execute an arbitrary OS command.

WFS-SR03 v1.0.3 was discovered to contain a command injection vulnerability via the sys_smb_pwdmod function.

WFS-SR03 v1.0.3 was discovered to contain a command injection vulnerability via the pro_stor_canceltrans_handler_part_19 function.

Devices with IP address setting tool "MagicalFinder" provided by I-O DATA DEVICE, INC. allow authenticated attackers to execute arbitrary OS commands via unspecified vectors.

WN-AX1167GR firmware version 3.00 and earlier allows an attacker to execute arbitrary OS commands via unspecified vectors.

TS-WPTCAM firmware version 1.18 and earlier, TS-WPTCAM2 firmware version 1.00, TS-WLCE firmware version 1.18 and earlier, TS-WLC2 firmware version 1.18 and earlier, TS-WRLC firmware version 1.17 and earlier, TS-PTCAM firmware version 1.18 and earlier, TS-PTCAM/POE firmware version 1.18 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in UD-LT2 firmware Ver.1.00.008_SE and earlier. If a user logs in to CLI of the affected product, an arbitrary OS command may be executed.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in WN-7D36QR and WN-7D36QR/UE. If this vulnerability is exploited, an arbitrary OS command may be executed by a remote authenticated attacker.

A vulnerability in the WebUI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. The vulnerability is due to insufficient input validation of data parameters for certain fields in the affected solution. An attacker could exploit this vulnerability by configuring a malicious username on the login page of the affected solution. A successful exploit could allow the attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system.

A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI API. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges.

A Command Injection vulnerability in httpd web server (setup.cgi) in SerComm h500s, FW: lowi-h500s-v3.4.22 allows logged in administrators to arbitrary OS commands as root in the device via the connection_type parameter of the statussupport_diagnostic_tracing.json endpoint.

An OS Command Injection vulnerability in Snare Central before 7.4.5 allows remote authenticated attackers to inject arbitrary OS commands via the ServerConf/DataManagement/DiskManager.php FORMNAS_share parameter.

In QuickBox Pro v2.5.8 and below, the config.php file has a variable which takes a GET parameter value and parses it into a shell_exec(''); function without properly sanitizing any shell arguments, therefore remote code execution is possible. Additionally, as the media server is running as root by default attackers can use the sudo command within this shell_exec(''); function, which allows for privilege escalation by means of RCE.

Geutebruck IP Cameras G-Code(EEC-2xxx), G-Cam(EBC-21xx/EFD-22xx/ETHC-22xx/EWPC-22xx): All versions 1.12.0.25 and prior may allow a remote authenticated user, using a specially crafted URL command, to execute commands as root.

cgi-bin/cgi_main in NUUO NVRmini 2 1.7.6 through 3.0.0 and NETGEAR ReadyNAS Surveillance 1.1.2 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the sn parameter to the transfer_license command.

GLPI is an open source IT Asset Management, issue tracking system and service desk system. The GLPI addressing plugin in versions < 2.9.1 suffers from authenticated Remote Code Execution vulnerability, allowing access to the server's underlying operating system using command injection abuse of functionality. There is no workaround for this issue and users are advised to upgrade or to disable the addressing plugin.

Symantec Web Gateway (SWG) before 5.2.5 allows remote authenticated users to execute arbitrary OS commands.

The Device42 Remote Collector before 17.05.01 does not sanitize user input in its SNMP Connectivity utility. This allows an authenticated attacker (with access to the console application) to execute arbitrary OS commands and escalate privileges.

kustomize-controller is a Kubernetes operator, specialized in running continuous delivery pipelines for infrastructure and workloads defined with Kubernetes manifests and assembled with Kustomize. Users that can create Kubernetes Secrets, Service Accounts and Flux Kustomization objects, could execute commands inside the kustomize-controller container by embedding a shell script in a Kubernetes Secret. This can be used to run `kubectl` commands under the Service Account of kustomize-controller, thus allowing an authenticated Kubernetes user to gain cluster admin privileges. In affected versions multitenant environments where non-admin users have permissions to create Flux Kustomization objects are affected by this issue. This vulnerability was fixed in kustomize-controller v0.15.0 (included in flux2 v0.18.0) released on 2021-10-08. Starting with v0.15, the kustomize-controller no longer executes shell commands on the container OS and the `kubectl` binary has been removed from the container image. To prevent the creation of Kubernetes Service Accounts with `secrets` in namespaces owned by tenants, a Kubernetes validation webhook such as Gatekeeper OPA or Kyverno can be used.

There is a Potential Zip Slip Vulnerability and OS Command Injection Vulnerability on the management system of baserCMS. Users with permissions to upload files may upload crafted zip files which may execute arbitrary commands on the host operating system. This is a vulnerability that needs to be addressed when the management system is used by an unspecified number of users. If you are eligible, please update to the new version as soon as possible.

MitraStar GPT-2541GNAC-N1 (HGU) 100VNZ0b33 devices allow remote authenticated users to obtain root access by executing command "deviceinfo show file &&/bin/bash" because of incorrect sanitization of parameter "path".

A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system and execute them using root-level privileges. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as a user with root-level privileges.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWeb version 6.4.1 and below, 6.3.15 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests.

A improper neutralization of special elements used in a command ('command injection') in Fortinet FortiExtender version 7.0.1 and below, 4.2.3 and below, 4.1.7 and below allows an authenticated attacker to execute privileged shell commands via CLI commands including special characters

Certain MOXA devices allow Authenticated Command Injection via /forms/web_importTFTP. This affects WAC-2004 1.7, WAC-1001 2.1, WAC-1001-T 2.1, OnCell G3470A-LTE-EU 1.7, OnCell G3470A-LTE-EU-T 1.7, TAP-323-EU-CT-T 1.3, TAP-323-US-CT-T 1.3, TAP-323-JP-CT-T 1.3, WDR-3124A-EU 2.3, WDR-3124A-EU-T 2.3, WDR-3124A-US 2.3, and WDR-3124A-US-T 2.3.

Remote code execution in the modules component in Yakamara Media Redaxo CMS version 5.12.1 allows an authenticated CMS user to execute code on the hosting system via a module containing malicious PHP code.

In some Lenovo ThinkServer-branded servers, a command injection vulnerability exists in the BMC firmware download command. This allows a privileged user to download and execute arbitrary code inside the BMC. This can only be exploited by authorized privileged users.

A remote arbitrary command execution vulnerability was discovered in HPE Aruba Instant (IAP) version(s): 6.4.x.x: 6.4.4.8-4.2.4.18 and below; Aruba Instant 6.5.x.x: 6.5.4.20 and below; Aruba Instant 8.5.x.x: 8.5.0.12 and below; Aruba Instant 8.6.x.x: 8.6.0.11 and below; Aruba Instant 8.7.x.x: 8.7.1.3 and below. Aruba has released patches for Aruba Instant (IAP) that address this security vulnerability.

IBM FileNet Content Manager 5.5.4, 5.5.6, and 5.5.7 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 212346.

Vulnerability in the product Docsis 3.0 UBC1319BA00 Router supported affected version 1319010201r009. The vulnerability allows an attacker with privileges and network access through the ping.cmd component to execute commands on the device.

Authenticated Semi-Blind Command Injection (via Parameter Injection) exists on Altus Nexto, Nexto Xpress, and Hadron Xtorm devices via the getlogs.cgi tcpdump feature. This affects Nexto NX3003 1.8.11.0, Nexto NX3004 1.8.11.0, Nexto NX3005 1.8.11.0, Nexto NX3010 1.8.3.0, Nexto NX3020 1.8.3.0, Nexto NX3030 1.8.3.0, Nexto NX5100 1.8.11.0, Nexto NX5101 1.8.11.0, Nexto NX5110 1.1.2.8, Nexto NX5210 1.1.2.8, Nexto Xpress XP300 1.8.11.0, Nexto Xpress XP315 1.8.11.0, Nexto Xpress XP325 1.8.11.0, Nexto Xpress XP340 1.8.11.0, and Hadron Xtorm HX3040 1.7.58.0.

Remote command execution (RCE) vulnerability in Nagios XI 5.2.x through 5.4.x before 5.4.13 allows an attacker to execute arbitrary commands on the target system, aka OS command injection.

An OS command injection vulnerability exists in CubeCart prior to 6.6.0, which may allow a user with an administrative privilege to execute an arbitrary OS command.

A remote arbitrary command execution vulnerability was discovered in HPE Aruba Instant (IAP) version(s): Aruba Instant 6.4.x.x: 6.4.4.8-4.2.4.17 and below; Aruba Instant 6.5.x.x: 6.5.4.18 and below; Aruba Instant 8.5.x.x: 8.5.0.11 and below; Aruba Instant 8.6.x.x: 8.6.0.6 and below; Aruba Instant 8.7.x.x: 8.7.1.0 and below. Aruba has released patches for Aruba Instant (IAP) that address this security vulnerability.

Fortinet FortiWan (formerly AscernLink) before 4.2.5 allows remote authenticated users with access to the nslookup functionality to execute arbitrary commands with root privileges via the graph parameter to diagnosis_control.php.

Arbitrary code execution vulnerability in Kentico 9 through 11 allows remote authenticated users to execute arbitrary operating system commands in a dynamic .NET code evaluation context via C# code in a "Pages -> Edit -> Template -> Edit template properties -> Layout" box. NOTE: the vendor has responded that there is intended functionality for authorized users to edit and update ascx code layout

A vulnerability has been identified in SCALANCE M875 (All versions). An authenticated remote attacker with access to the web interface (443/tcp), could execute arbitrary operating system commands. Successful exploitation requires that the attacker has network access to the web interface. The attacker must be authenticated as administrative user to exploit the security vulnerability. The vulnerability could allow an attacker to execute arbitrary code on the device. At the time of advisory publication no public exploitation of this security vulnerability was known.

A command injection vulnerability was reported in the Integrated Management Module (IMM) of legacy IBM System x 3550 M3 and IBM System x 3650 M3 servers that could allow the execution of operating system commands over an authenticated SSH or Telnet session.

On D-Link DIR-620 devices with a certain customized (by ISP) variant of firmware 1.0.3, 1.0.37, 1.3.1, 1.3.3, 1.3.7, 1.4.0, and 2.0.22, OS command injection is possible as a result of incorrect processing of the res_buf parameter to index.cgi.

An issue was discovered on AudioCodes 450HD IP Phone devices with firmware 3.0.0.535.106. The traceroute and ping functionality, which uses a parameter in a request to command.cgi from the Monitoring page in the web UI, unsafely puts user-alterable data directly into an OS command, leading to Remote Code Execution via shell metacharacters in the query string.

In app/Controller/ServersController.php in MISP 2.4.87, a server setting permitted the override of a path variable on certain Red Hed Enterprise Linux and CentOS systems (where rh_shell_fix was enabled), and consequently allowed site admins to inject arbitrary OS commands. The impact is limited by the setting being only accessible to the site administrator.

A code execution vulnerability exists in the Libcli Test Environment functionality of D-LINK DIR-3040 1.13B03. A specially crafted network request can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger this vulnerability.

iBall iB-WRA150N 1.2.6 build 110401 Rel.47776n devices allow remote authenticated users to execute arbitrary OS commands via shell metacharacters in the ping test arguments on the Diagnostics page.