A vulnerability, which was classified as critical, was found in Wifi-soft UniBox Controller up to 20250506. This affects an unknown part of the file /billing/pms_check.php. The manipulation of the argument ipaddress leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A Remote Arbitrary Code Execution vulnerability in HPE Smart Storage Administrator version before v2.60.18.0 was found.

Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to perform command injection attacks against an affected device. These vulnerabilities are due to improper validation of user-supplied input. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit these vulnerabilities, the attacker must have valid administrative credentials for the device.

Certain Zyxel products allow command injection by an admin via an input string to chg_exp_pwd during a password-change action. This affects VPN On-premise before ZLD V4.39 week38, VPN Orchestrator before SD-OS V10.03 week32, USG before ZLD V4.39 week38, USG FLEX before ZLD V4.55 week38, ATP before ZLD V4.55 week38, and NSG before 1.33 patch 4.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to inject IOS commands to an affected device. The injected commands should require a higher privilege level in order to be executed. The vulnerability is due to insufficient input validation of specific HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a specific web UI endpoint on an affected device. A successful exploit could allow the attacker to inject IOS commands to the affected device, which could allow the attacker to alter the configuration of the device or cause a denial of service (DoS) condition.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

A command injection vulnerability in Avaya Session Border Controller for Enterprise could allow an authenticated, remote attacker to send specially crafted messages and execute arbitrary commands with the affected system privileges. Affected versions of Avaya Session Border Controller for Enterprise include 7.x, 8.0 through 8.1.1.x

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “check_vertica_upgrade” value for the “cpIp” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

A system command injection vulnerability in zyshclient in ZyXEL NSA325 V2 version 4.81 allows attackers to execute system commands via the web application API.

The handle_certificate function in /vmi/manager/engine/management/commands/apns_worker.py in Trend Micro Virtual Mobile Infrastructure before 5.1 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the password to api/v1/cfg/oauth/save_identify_pfx/.

The Apache Thrift Go client library exposed the potential during code generation for command injection due to using an external formatting tool. Affected Apache Thrift 0.9.3 and older, Fixed in Apache Thrift 0.10.0.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

Centreon 18.x before 18.10.6, 19.x before 19.04.3, and Centreon web before 2.8.29 allows the attacker to execute arbitrary system commands by using the value "init_script"-"Monitoring Engine Binary" in main.get.php to insert a arbitrary command into the database, and execute it by calling the vulnerable page www/include/configuration/configGenerate/xml/generateFiles.php (which passes the inserted value to the database to shell_exec without sanitizing it, allowing one to execute system arbitrary commands).

A vulnerability, which was classified as critical, has been found in TRENDnet TEW-652BRP 3.04B01. This issue affects some unknown processing of the file get_set.ccp of the component Web Management Interface. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-219935.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to inject and execute arbitrary commands with administrative privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of user-supplied input to the web UI. An attacker could exploit this vulnerability by submitting crafted input to the web UI. A successful exploit could allow an attacker to execute arbitrary commands with administrative privileges on an affected device.

Command injection vulnerability in Junos Space before 15.2R2 allows attackers to execute arbitrary code as a root user.

A vulnerability classified as critical was found in FLIR AX8 up to 1.46.16. This vulnerability affects the function setDataTime of the file \usr\www\application\models\settingsregional.php. The manipulation of the argument year/month/day/hour/minute leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device. The vulnerability is due to improper input sanitization. An attacker who has valid administrative access to an affected device could exploit this vulnerability by supplying a crafted input parameter on a form in the web UI and then submitting that form. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device, which could lead to complete system compromise.

IBM Security QRadar SIEM 7.1.x and 7.2.x before 7.2.7 allows remote authenticated users to execute arbitrary OS commands as root via unspecified vectors.

A vulnerability was found in Roxy-WI up to 8.1.3. It has been declared as critical. Affected by this vulnerability is the function action_service of the file app/modules/roxywi/roxy.py. The manipulation of the argument action/service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 8.1.4 is able to address this issue. The identifier of the patch is 32313928eb9ce906887b8a30bf7b9a3d5c0de1be. It is recommended to upgrade the affected component.

The GMS ViewPoint (GMSVP) web application in Dell SonicWALL GMS, Analyzer, and UMA EM5000 7.2, 8.0, and 8.1 before Hotfix 168056 allows remote authenticated users to execute arbitrary commands via vectors related to configuration input.

flu.cgi in the web interface on SysLINK SL-1000 Machine-to-Machine (M2M) Modular Gateway devices with firmware before 01A.8 allows remote authenticated users to execute arbitrary commands via the 5066 (aka dnsmasq) parameter.

A vulnerability classified as critical was found in D-Link DIR-600L up to 2.07B01. This vulnerability affects the function wake_on_lan. The manipulation of the argument host leads to command injection. The attack can be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical has been found in D-Link DIR-600L up to 2.07B01. This affects the function formSysCmd. The manipulation of the argument host leads to command injection. It is possible to initiate the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer.

The web-based diagnostics console in Dell EMC iDRAC6 (Monolithic versions prior to 2.91 and Modular all versions) contains a command injection vulnerability. A remote authenticated malicious iDRAC user with access to the diagnostics console could potentially exploit this vulnerability to execute arbitrary commands as root on the affected iDRAC system.

An OS command injection vulnerability in the web administration component of Micro Focus Secure Messaging Gateway (SMG) allows a remote attacker authenticated as a privileged user to execute arbitrary OS commands on the SMG server. This can be exploited in conjunction with CVE-2018-12464 to achieve unauthenticated remote code execution. Affects Micro Focus Secure Messaging Gateway versions prior to 471. It does not affect previous versions of the product that used GWAVA product name (i.e. GWAVA 6.5).

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of command input by the affected software. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.

There is a command injection vulnerability in CMA service module of FusionCompute product when processing the default certificate file. The software constructs part of a command using external special input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands to the system. Affected product versions include: FusionCompute 6.0.0, 6.3.0, 6.3.1, 6.5.0, 6.5.1, 8.0.0.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV340 and RV345 Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device.

A vulnerability in the CLI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting malicious input to the load command within the VPN subsystem. The attacker must be authenticated to access the affected CLI parameter. A successful exploit could allow an attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69866.

A vulnerability in the CronJob scheduler API of Cisco Digital Network Architecture (DNA) Center could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to incorrect input validation of user-supplied data. An attacker could exploit this vulnerability by sending a malicious packet. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. Cisco Bug IDs: CSCvi42263.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input to scripts by the web-based management interface. An attacker could exploit this vulnerability by sending malicious requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the root user.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV340 and RV345 Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of command input by the affected software. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.

General Electric (GE) Industrial Solutions UPS SNMP/Web Adapter devices with firmware before 4.8 allow remote authenticated users to execute arbitrary commands via unspecified vectors.

There is a command injection vulnerability in CMA service module of FusionCompute 6.3.0, 6.3.1, 6.5.0 and 8.0.0 when processing the default certificate file. The software constructs part of a command using external special input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands to the system.

IBM Security Guardium Database Activity Monitor 8.2 before p310, 9.x through 9.5 before p700, and 10.x through 10.1 before p100 allows remote authenticated users to execute arbitrary commands with root privileges via the search field.

IBM Security Identity Manager (ISIM) Virtual Appliance 7.0.0.0 through 7.0.1.0 before 7.0.1-ISS-SIM-FP0001 allows remote authenticated users to execute arbitrary code with administrator privileges via unspecified vectors. IBM X-Force ID: 111640.

The devtools.sh script in AXIS network cameras allows remote authenticated users to execute arbitrary commands via shell metacharacters in the app parameter to (1) app_license.shtml, (2) app_license_custom.shtml, (3) app_index.shtml, or (4) app_params.shtml.

An OS command injection vulnerability exists in the sysupgrade command injection functionality of Robustel R1510 3.1.16 and 3.3.0. A specially-crafted network request can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger this vulnerability.

The log-gather implementation in the web administration interface in EMC Isilon OneFS 6.5.x.x through 7.1.1.x before 7.1.1.5 and 7.2.0.x before 7.2.0.2 allows remote authenticated users to execute arbitrary commands with root privileges via unspecified vectors.

IBM QRadar SIEM 7.1 MR2 before Patch 11 IF02 and 7.2.x before 7.2.5 Patch 4 allows remote authenticated users to execute arbitrary commands with root privileges by leveraging admin access.

The Management Interface in Citrix NetScaler Application Delivery Controller (ADC) and NetScaler Gateway 10.1 before 10.1.132.8, 10.5 before Build 56.15, and 10.5.e before Build 56.1505.e allows remote authenticated users to execute arbitrary shell commands via shell metacharacters in the filter parameter to rapi/ipsec_logs.

The Parental Control panel in Genexis devices with DRGOS before 1.14.1 allows remote authenticated users to execute arbitrary CLI commands via the (1) start_hour, (2) start_minute, (3) end_hour, (4) end_minute, or (5) hostname parameter.

Sourcetree for Windows had several argument and command injection bugs in Mercurial and Git repository handling. An attacker with permission to commit to a repository linked in Sourcetree for Windows is able to exploit this issue to gain code execution on the system. From version 0.8.4b of Sourcetree for Windows, this vulnerability can be triggered from a webpage through the use of the Sourcetree URI handler. Versions of Sourcetree for Windows starting with 0.5.1.0 before version 2.4.7.0 are affected by this vulnerability

The web administrative portal in Zhone zNID GPON 2426A before S3.0.501 allows remote attackers to execute arbitrary commands via shell metacharacters in the ipAddr parameter to zhnping.cmd.