Moxa MXView 2.8 allows remote attackers to cause a Denial of Service by sending overly long junk payload for the MXView client login credentials.

Exploitable denial of service vulnerabilities exists in the Service Agent functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted packet can cause a denial of service. An attacker can send a large packet to 4001/tcp to trigger this vulnerability.

Exploitable denial of service vulnerabilities exists in the Service Agent functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted packet can cause a denial of service. An attacker can send a large packet to 4000/tcp to trigger this vulnerability.

An exploitable denial of service vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP URI can cause a null pointer dereference resulting in the web server crashing. An attacker can send a crafted URI to trigger this vulnerability.

Data can be copied without validation in the built-in web server in Moxa NPort IAW5000A-I/O series firmware version 2.2 or earlier, which may allow a remote attacker to cause denial-of-service conditions.

An issue was discovered in Moxa NPort 5110 versions prior to 2.6, NPort 5130/5150 Series versions prior to 3.6, NPort 5200 Series versions prior to 2.8, NPort 5400 Series versions prior to 3.11, NPort 5600 Series versions prior to 3.7, NPort 5100A Series & NPort P5150A versions prior to 1.3, NPort 5200A Series versions prior to 1.3, NPort 5150AI-M12 Series versions prior to 1.2, NPort 5250AI-M12 Series versions prior to 1.2, NPort 5450AI-M12 Series versions prior to 1.2, NPort 5600-8-DT Series versions prior to 2.4, NPort 5600-8-DTL Series versions prior to 2.4, NPort 6x50 Series versions prior to 1.13.11, NPort IA5450A versions prior to v1.4. The amount of resources requested by a malicious actor is not restricted, leading to a denial-of-service caused by resource exhaustion.

An exploitable null pointer dereference vulnerability exists in the Web Application /forms/web_runScript iw_filename functionality of Moxa AWK-3131A Wireless Access Point running firmware 1.1. An HTTP POST request with a blank line in the header will cause a segmentation fault in the web server.

An exploitable null pointer dereference exists in the Web Application functionality of Moxa AWK-3131A Wireless Access Point running firmware 1.1. Any HTTP GET request not preceded by an '/' will cause a segmentation fault in the web server. An attacker can send any of a multitude of potentially unexpected HTTP get requests to trigger this vulnerability.

Memory leak on Moxa Secure Router EDR-G903 devices before 3.4.12 allows remote attackers to cause a denial of service (memory consumption) by executing the ping function.

Moxa Secure Router EDR-G903 devices before 3.4.12 allow remote attackers to cause a denial of service (cold start) by sending two crafted ping requests.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. An Integer overflow in the built-in web server allows remote attackers to initiate DoS.

An exploitable denial-of-service vulnerability exists in ServiceAgent functionality of the Moxa AWK-3131A, firmware version 1.13. A specially crafted packet can cause an integer underflow, triggering a large memcpy that will access unmapped or out-of-bounds memory. An attacker can send this packet while unauthenticated to trigger this vulnerability.

On Moxa EDS-G508E, EDS-G512E, and EDS-G516E devices (with firmware through 6.0), denial of service can occur via PROFINET DCE-RPC endpoint discovery packets.

An issue was discovered in Moxa SoftCMS versions prior to Version 1.6. Moxa SoftCMS Webserver does not properly validate input. An attacker could provide unexpected values and cause the program to crash or excessive consumption of resources could result in a denial-of-service condition.

An Improper Handling of Length Parameter Inconsistency issue was discovered in Moxa OnCell G3100-HSPA Series version 1.4 Build 16062919 and prior. An attacker may be able to edit the element of an HTTP request, causing the device to become unavailable.

Moxa TN-5900 v3.1 series routers, MGate 5109 v2.2 series protocol gateways, and MGate 5101-PBM-MN v2.1 series protocol gateways were discovered to contain a memory leak which allows attackers to cause a Denial of Service (DoS) via crafted packets.

There is Memory corruption in the web interface of Moxa OnCell G3470A-LTE Series version 1.6 Build 18021314 and prior, a different vulnerability than CVE-2018-11425.

There is Memory corruption in the web interface Moxa OnCell G3100-HSPA Series version 1.6 Build 17100315 and prior, different vulnerability than CVE-2018-11420.

In Moxa NPort 5210, 5230, and 5232 versions 2.9 build 17030709 and prior, the amount of resources requested by a malicious actor are not restricted, allowing for a denial-of-service condition.

An Injection issue was discovered in Moxa NPort 5110 Version 2.2, NPort 5110 Version 2.4, NPort 5110 Version 2.6, NPort 5110 Version 2.7, NPort 5130 Version 3.7 and prior, and NPort 5150 Version 3.7 and prior. An attacker may be able to inject packets that could potentially disrupt the availability of the device.

An exploitable denial of service vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP URI can cause a null pointer dereference resulting in denial of service. An attacker can send a GET request to "/MOXA\_CFG.ini" without a cookie header to trigger this vulnerability.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. A Buffer overflow in the built-in web server allows remote attackers to initiate DoS, and probably to execute arbitrary code (issue 1 of 2).

An exploitable denial of service vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP URI can cause a null pointer dereference resulting in denial of service. An attacker can send a GET request to "/MOXA\_LOG.ini" without a cookie header to trigger this vulnerability.

An exploitable denial of service vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP URI can cause a null pointer dereference resulting in denial of service. An attacker can send a GET request to "/MOXA\_CFG2.ini" without a cookie header to trigger this vulnerability.

A Resource Exhaustion issue was discovered in Moxa NPort 5110 Version 2.2, NPort 5110 Version 2.4, NPort 5110 Version 2.6, NPort 5110 Version 2.7, NPort 5130 Version 3.7 and prior, and NPort 5150 Version 3.7 and prior. An attacker may be able to exhaust memory resources by sending a large amount of TCP SYN packets.

Improper validation of the ChassisID TLV in userdisk/vport_lldpd in Moxa Camera VPort 06EC-2V Series, version 1.1, allows attackers to cause a denial of service due to a negative number passed to the memcpy function via a crafted lldp packet.

An integer underflow was discovered in userdisk/vport_lldpd in Moxa Camera VPort 06EC-2V Series, version 1.1, improper validation of the PortID TLV leads to Denial of Service via a crafted lldp packet.

Moxa EDR 810, all versions 5.1 and prior, allows an authenticated attacker to abuse the ping feature to execute unauthorized commands on the router, which may allow an attacker to perform remote code execution.

Improper input validation in the built-in web server in Moxa NPort IAW5000A-I/O series firmware version 2.2 or earlier may allow a remote attacker to execute commands.

In firmware version MS_2.6.9900 of Columbia Weather MicroServer, the BACnet daemon does not properly validate input, which could allow a remote attacker to send specially crafted packets causing the device to become unavailable.

The IPv6 implementation in Microsoft Windows 8, Windows Server 2012, and Windows RT does not properly validate packets, which allows remote attackers to cause a denial of service (system hang) via crafted ICMPv6 Router Advertisement packets, aka "TCP/IP Version 6 (IPv6) Denial of Service Vulnerability."

A vulnerability in the implementation of the PROFINET Discovery and Configuration Protocol (PN-DCP) for Cisco IOS 12.2 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper parsing of ingress PN-DCP Identify Request packets destined to an affected device. An attacker could exploit this vulnerability by sending a crafted PN-DCP Identify Request packet to an affected device and then continuing to send normal PN-DCP Identify Request packets to the device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are configured to process PROFINET messages. Beginning with Cisco IOS Software Release 12.2(52)SE, PROFINET is enabled by default on all the base switch module and expansion-unit Ethernet ports. Cisco Bug IDs: CSCuz47179.

The web interface in AstroCam 2.0.0 through 2.6.5 allows remote attackers to cause a denial of service (daemon shutdown) via requests that contain a large amount of data in the "a" variable, which "fills up the message queue."

The Microsoft Server Block Message (SMB) on Microsoft Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8.1, Windows Server 2012 Gold and R2, Windows RT 8.1, Windows 10 Gold, 1511, 1607, and 1703, and Windows Server 2016, allows a denial of service vulnerability when an attacker sends specially crafted requests to the server, aka "Windows SMB Denial of Service Vulnerability".

Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuz95334.

A vulnerability in the email message filtering feature of Cisco AsyncOS Software for the Cisco Email Security Appliance could allow an unauthenticated, remote attacker to cause an affected device to run out of memory and stop scanning and forwarding email messages. When system memory is depleted, it can cause the filtering process to crash, resulting in a denial of service (DoS) condition on the device. This vulnerability affects software version 9.0 through the first fixed release of Cisco AsyncOS Software for Cisco Email Security Appliances, both virtual and hardware appliances, if the software is configured to apply a message filter or content filter to incoming email attachments. The vulnerability is not limited to any specific rules or actions for a message filter or content filter. Cisco Bug IDs: CSCvd29354.

A vulnerability in the implementation of the direct authentication feature in Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to the local IP address of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects Cisco Adaptive Security Appliance (ASA) Software that is running on the following Cisco products: ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, ISA 3000 Industrial Security Appliance. Cisco Bug IDs: CSCvd59063.

There is an illegal address access in the extend_alias_table function in localealias.c of Exiv2 0.26. A crafted input will lead to remote denial of service.

Multiple Yokogawa products that contain Vnet/IP Open Communication Driver (CENTUM CS 3000(R3.05.00 - R3.09.50), CENTUM CS 3000 Entry Class(R3.05.00 - R3.09.50), CENTUM VP(R4.01.00 - R6.03.10), CENTUM VP Entry Class(R4.01.00 - R6.03.10), Exaopc(R3.10.00 - R3.75.00), PRM(R2.06.00 - R3.31.00), ProSafe-RS(R1.02.00 - R4.02.00), FAST/TOOLS(R9.02.00 - R10.02.00), B/M9000 VP(R6.03.01 - R8.01.90)) allows remote attackers to cause a denial of service attack that may result in stopping Vnet/IP Open Communication Driver's communication via unspecified vectors.

Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc43709.

An issue was discovered on KONE Group Controller (KGC) devices before 4.6.5. Denial of Service can occur through the open HTTP interface, aka KONE-04.

In Wireshark 2.6.0 to 2.6.1, 2.4.0 to 2.4.7, and 2.2.0 to 2.2.15, the MMSE dissector could go into an infinite loop. This was addressed in epan/proto.c by adding offset and length validation.

TP-Link WR840N devices allow remote attackers to cause a denial of service (connectivity loss) via a series of packets with random MAC addresses.

The SIP channel module in Yet Another Telephony Engine (Yate) before 1.2.0 sets the caller_info_uri parameter using an incorrect variable that can be NULL, which allows remote attackers to cause a denial of service (NULL dereference and application crash) via a Call-Info header without a purpose parameter.

TP-Link TL-WA850RE Wi-Fi Range Extender with hardware version 5 allows remote attackers to cause a denial of service (reboot) via data/reboot.json.

This vulnerability allows remote attackers to deny service on vulnerable installations of npm mosca 2.8.1. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of topics. A crafted regular expression can cause the broker to crash. An attacker can leverage this vulnerability to deny access to the target system. Was ZDI-CAN-6306.

In Wireshark through 2.0.13 and 2.2.x through 2.2.7, the openSAFETY dissector could crash or exhaust system memory. This was addressed in epan/dissectors/packet-opensafety.c by adding length validation. NOTE: this vulnerability exists because of an incomplete fix for CVE-2017-9350.

In LibTIFF 4.0.8, there is a assertion abort in the TIFFWriteDirectoryTagCheckedLong8Array function in tif_dirwrite.c. A crafted input will lead to a remote denial of service attack.

In Wireshark 2.2.0 to 2.2.7 and 2.0.0 to 2.0.13, the AMQP dissector could crash. This was addressed in epan/dissectors/packet-amqp.c by checking for successful list dissection.

The server driver (srv.sys) in Microsoft Windows NT 4.0, 2000, XP, and Server 2003 allows remote attackers to cause a denial of service (system crash) via an SMB_COM_TRANSACTION SMB message that contains a string without null character termination, which leads to a NULL dereference in the ExecuteTransaction function, possibly related to an "SMB PIPE," aka the "Mailslot DOS" vulnerability. NOTE: the name "Mailslot DOS" was derived from incomplete initial research; the vulnerability is not associated with a mailslot.