The restricted shell interface in UCOPIA Wireless Appliance before 5.1.8 allows remote authenticated users to gain 'admin' privileges via shell metacharacters in the less command.

Improper input sanitization within the restricted administration shell on UCOPIA Wireless Appliance devices using firmware version 5.1.x before 5.1.13 allows authenticated remote attackers to escape the shell and escalate their privileges by adding a LocalCommand to the SSH configuration file in the user home folder.

An Authentication Bypass vulnerability in the SAML Authentication component of BlackBerry Workspaces Server (deployed with Appliance-X) version(s) 10.1, 9.1 and earlier could allow an attacker to potentially gain access to the application in the context of the targeted user’s account.

Attackers can access the CGE account management function without privilege for permission elevation and execute arbitrary commands or files after obtaining user permissions.

Advanced Authentication versions prior to 6.3 SP4 have a potential broken authentication due to improper session management issue.

A vulnerability was found in Apereo CAS 6.6. It has been classified as critical. This affects an unknown part of the file /login?service of the component 2FA. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

In firmware version MS_2.6.9900 of Columbia Weather MicroServer, an authenticated web user can access an alternative configuration page config_main.php that allows manipulation of the device.

modules/admuser.php in myGesuad 0.9.14 (aka 0.9) does not require administrative authentication, which allows remote authenticated users to list user accounts via a Find action.

IBM WebSphere Portal 7.0, 8.0, 8.5, and 9.0 may fail to set the correct user context in certain impersonation scenarios, which can allow a user to act with the identity of a different user. IBM X-Force ID: 144958.

The Service Component Architecture (SCA) feature pack for IBM WebSphere Application Server (WAS) SCA 1.0 before 1.0.0.3 allows remote authenticated users to bypass intended authentication.transport access restrictions and obtain unspecified access via unknown vectors.

A vulnerability in the shell access request mechanism of Cisco IOS XE Software could allow an authenticated, local attacker to bypass authentication and gain unrestricted access to the root shell of an affected device. The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by requesting access to the root shell of an affected device, after the shell access feature has been enabled. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device.

IBM WebSphere Partner Gateway (WPG) 6.0.0 through 6.0.0.7 does not properly handle failures of signature verification, which might allow remote authenticated users to submit a crafted RosettaNet (aka RNIF) document to a backend application, related to (1) "altered service content" and (2) "digital signature foot-print."

Jenkins before 1.551 and LTS before 1.532.2 does not invalidate the API token when a user is deleted, which allows remote authenticated users to retain access via the token.

In Apache Zeppelin prior to 0.8.0 the cron scheduler was enabled by default and could allow users to run paragraphs as other users without authentication.

prosody before versions 0.10.2, 0.9.14 is vulnerable to an Authentication Bypass. Prosody did not verify that the virtual host associated with a user session remained the same across stream restarts. A user may authenticate to XMPP host A and migrate their authenticated session to XMPP host B of the same Prosody instance.

Improper authentication in the Intel(R) In-Band Manageability software before version 2.13.0 may allow a privileged user to potentially enable escalation of privilege via network access.

A certain Red Hat patch for SquirrelMail 1.4.8 sets the same SQMSESSID cookie value for all sessions, which allows remote authenticated users to access other users' folder lists and configuration data in opportunistic circumstances by using the standard webmail.php interface. NOTE: this vulnerability exists because of an incorrect fix for CVE-2008-3663.

A vulnerability in the Cisco Umbrella API could allow an authenticated, remote attacker to view and modify data across their organization and other organizations. The vulnerability is due to insufficient authentication configurations for the API interface of Cisco Umbrella. An attacker could exploit this vulnerability to view and potentially modify data for their organization or other organizations. A successful exploit could allow the attacker to read or modify data across multiple organizations.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides UPnP services that are available on port 3480 and can also be accessed via port 80 using the url "/port_3480". It seems that the UPnP services provide "wget" as one of the service actions for a normal user to connect the device to an external website. It retrieves the parameter "URL" from the query string and then passes it to an internal function that uses the curl module on the device to retrieve the contents of the website.

django-mfa3 is a library that implements multi factor authentication for the django web framework. It achieves this by modifying the regular login view. Django however has a second login view for its admin area. This second login view was not modified, so the multi factor authentication can be bypassed. Users are affected if they have activated both django-mfa3 (< 0.5.0) and django.contrib.admin and have not taken any other measures to prevent users from accessing the admin login view. The issue has been fixed in django-mfa3 0.5.0. It is possible to work around the issue by overwriting the admin login route, e.g. by adding the following URL definition *before* the admin routes: url('admin/login/', lambda request: redirect(settings.LOGIN_URL)

An information disclosure / elevation of privilege vulnerability in the BlackBerry Workspaces Server could potentially allow an attacker who has legitimate access to BlackBerry Workspaces to gain access to another user's workspace by making multiple login requests to the server.

Authentication vulnerability found in Dahua NVR models NVR50XX, NVR52XX, NVR54XX, NVR58XX with software before DH_NVR5xxx_Eng_P_V2.616.0000.0.R.20171102. Attacker could exploit this vulnerability to gain access to additional operations by means of forging json message.

IBM Security QRadar SIEM 7.2 and 7.3 could allow a user to bypass authentication which could lead to code execution. IBM X-Force ID: 138824.

The FusionSphere OpenStack V100R006C00SPC102(NFV) has an improper authentication vulnerability. Due to improper authentication on one port, an authenticated, remote attacker may exploit the vulnerability to execute more operations by send a crafted rest message.

IBM DataPower Gateway 2018.4.1.0 through 2018.4.1.8 could allow an authenticated user to bypass security restrictions, and continue to access the server even after authentication certificates have been revolked. IBM X-Force ID: 174961.

A flaw was found in the Pacemaker configuration tool (pcs). The pcs daemon was allowing expired accounts, and accounts with expired passwords to login when using PAM authentication. Therefore, unprivileged expired accounts that have been denied access could still login.

capsule-proxy is a reverse proxy for Capsule Operator which provides multi-tenancy in Kubernetes. In versions prior to 0.2.1 an attacker with a proper authentication mechanism may use a malicious `Connection` header to start a privilege escalation attack towards the Kubernetes API Server. This vulnerability allows for an exploit of the `cluster-admin` Role bound to `capsule-proxy`. There are no known workarounds for this issue.

Siemens RUGGEDCOM ROX I (all versions) allow an authenticated user to bypass access restrictions in the web interface at port 10000/TCP to obtain privileged file system access or change configuration settings.

Progress Sitefinity 9.1 uses wrap_access_token as a non-expiring authentication token that remains valid after a password change or a session termination. Also, it is transmitted as a GET parameter. This is fixed in 10.1.

eLabFTW is an electronic lab notebook manager for research teams. In versions prior to 4.2.0 there is a vulnerability which allows any authenticated user to gain access to arbitrary accounts by setting a specially crafted email address. This vulnerability impacts all instances that have not set an explicit email domain name allowlist. Note that whereas neither administrators nor targeted users are notified of a change, an attacker will need to control an account. The default settings require administrators to validate newly created accounts. The problem has been patched. Users should upgrade to at least version 4.2.0. For users unable to upgrade enabling an email domain allow list (from Sysconfig panel, Security tab) will completely resolve the issue.

An issue was discovered in phpMyAdmin 4.8.x before 4.8.2, in which an attacker can include (view and potentially execute) files on the server. The vulnerability comes from a portion of code where pages are redirected and loaded within phpMyAdmin, and an improper test for whitelisted pages. An attacker must be authenticated, except in the "$cfg['AllowArbitraryServer'] = true" case (where an attacker can specify any host he/she is already in control of, and execute arbitrary code on phpMyAdmin) and the "$cfg['ServerDefault'] = 0" case (which bypasses the login requirement and runs the vulnerable code without any authentication).

An Access Control vulnerability exists in Nacos 2.0.3 in the access prompt page; enter username and password, click on login to capture packets and then change the returned package, which lets a malicious user login.

A Trusted RFC connection in SAP KERNEL 32NUC, SAP KERNEL 32Unicode, SAP KERNEL 64NUC, SAP KERNEL 64Unicode 7.21, 7.21EXT, 7.22, 7.22EXT; SAP KERNEL from 7.21 to 7.22, 7.45, 7.49, can be established to a different client or a different user on the same system, although no explicit Trusted/Trusting Relation to the same system has been defined.

A flaw was found in the reset credential flow in all Keycloak versions before 8.0.0. This flaw allows an attacker to gain unauthorized access to the application.

The SASL authentication functionality in 389 Directory Server before 1.2.11.26 allows remote authenticated users to connect as an arbitrary user and gain privileges via the authzid parameter in a SASL/GSSAPI bind.

Session fixation vulnerability in phpFreeChat 1.1 allows remote authenticated users to hijack web sessions by setting the session_id parameter to match the victim's nickid parameter.

NodeBB before version 1.14.3 has a bug introduced in version 1.12.2 in the validation logic that makes it possible to change the password of any user on a running NodeBB forum by sending a specially crafted socket.io call to the server. This could lead to a privilege escalation event due via an account takeover. As a workaround you may cherry-pick the following commit from the project's repository to your running instance of NodeBB: 16cee1b03ba3eee177834a1fdac4aa8a12b39d2a. This is fixed in version 1.14.3.

In GitLab before 13.0.12, 13.1.6, and 13.2.3, improper access control was used on the Applications page

Unspecified vulnerability in the Sun Java System Web Server 7.0 plugin in Sun N1 Service Provisioning System (SPS) 5.2 and 6.0 allows remote authenticated SPS users to gain administrative access to the web server via unknown attack vectors.

Glewlwyd 2.0.0, fixed in 2.6.1 is affected by an incorrect access control vulnerability. One user can attempt to log in as another user without its password.

A vulnerability in the Cisco IOS XE Software REST API could allow an authenticated, remote attacker to bypass API authorization checks and use the API to perform privileged actions on an affected device. The vulnerability is due to insufficient authorization checks for requests that are sent to the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious request to an affected device via the REST API. A successful exploit could allow the attacker to selectively bypass authorization checks for the REST API of the affected software and use the API to perform privileged actions on an affected device. Cisco Bug IDs: CSCuz56428.

A Remote Authentication bypass in Aruba ClearPass Policy Manager leads to complete cluster compromise. An authentication flaw in all versions of ClearPass could allow an attacker to compromise the entire cluster through a specially crafted API call. Network access to the administrative web interface is required to exploit this vulnerability. Resolution: Fixed in 6.7.6 and 6.6.10-hotfix.

Flask-AppBuilder is a development framework built on top of Flask. Verions prior to 3.3.4 contain an improper authentication vulnerability in the REST API. The issue allows for a malicious actor with a carefully crafted request to successfully authenticate and gain access to existing protected REST API endpoints. This only affects non database authentication types and new REST API endpoints. Users should upgrade to Flask-AppBuilder 3.3.4 to receive a patch.

eLabFTW is an electronic lab notebook manager for research teams. In versions prior to 4.2.0 there is a vulnerability which allows an attacker to authenticate as an existing user, if that user was created using a single sign-on authentication option such as LDAP or SAML. It impacts instances where LDAP or SAML is used for authentication instead of the (default) local password mechanism. Users should upgrade to at least version 4.2.0.

The Norton App Lock prior to version 1.3.0.13 can be susceptible to an authentication bypass exploit. In this type of circumstance, the exploit can allow the user to kill the app to prevent it from locking the device, thereby allowing the individual to gain device access.

October is a Content Management System (CMS) and web platform built on the the Laravel PHP Framework. In affected versions administrator accounts which had previously been deleted may still be able to sign in to the backend using October CMS v2.0. The issue has been patched in v2.1.12 of the october/october package. There are no workarounds for this issue and all users should update.

The FusionSphere OpenStack V100R006C00SPC102(NFV) has an improper authentication vulnerability. Due to improper authentication on one port, an authenticated, remote attacker may exploit the vulnerability to execute more operations by send a crafted rest message.

A vulnerability has been identified in TeleControl Server Basic < V3.1. An authenticated attacker with a low-privileged account to the TeleControl Server Basic's port 8000/tcp could escalate his privileges and perform administrative operations.

A vulnerability in the web console of the Cisco Cloud Services Platform (CSP) 2100 could allow an authenticated, remote attacker to interact maliciously with the services or virtual machines (VMs) operating remotely on an affected CSP device. The vulnerability is due to weaknesses in the generation of certain authentication mechanisms in the URL of the web console. An attacker could exploit this vulnerability by browsing to one of the hosted VMs' URLs in Cisco CSP and viewing specific patterns that control the web application's mechanisms for authentication control. An exploit could allow the attacker to access a specific VM on the CSP, which causes a complete loss of the system's confidentiality, integrity, and availability. This vulnerability affects Cisco Cloud Services Platform (CSP) 2100 running software release 2.1.0, 2.1.1, 2.1.2, 2.2.0, 2.2.1, or 2.2.2. Cisco Bug IDs: CSCve64690.

It was found that Keycloak oauth would permit an authenticated resource to obtain an access/refresh token pair from the authentication server, permitting indefinite usage in the case of permission revocation. An attacker on an already compromised resource could use this flaw to grant himself continued permissions and possibly conduct further attacks.