Buffer overflow in Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary code via HTTP request and response.

Buffer overflow in Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary code via tools_system.cgi date parameter, time parameter, and offset parameter.

Buffer overflow in Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary code via netWizard.cgi date parameter, time parameter, and offset parameter.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via import.cgi encKey parameter.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via tools_firmware.cgi date parameter, time parameter, and offset parameter.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via FactoryPassword parameter of a certain URL, different URL from CVE-2018-0634.

Aterm WG1200HP firmware Ver1.0.31 and earlier allows attacker with administrator rights to execute arbitrary OS commands via targetAPSsid parameter.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via export.cgi encKey parameter.

Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary OS commands via targetAPSsid parameter.

Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary OS commands via sysCmd parameter.

Aterm WG1200HP firmware Ver1.0.31 and earlier allows attacker with administrator rights to execute arbitrary OS commands via formSysCmd parameter.

Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary OS commands via HTTP request and response.

Aterm WG1200HP firmware Ver1.0.31 and earlier allows attacker with administrator rights to execute arbitrary OS commands via HTTP request and response.

Aterm WG1200HP firmware Ver1.0.31 and earlier allows attacker with administrator rights to execute arbitrary OS commands via sysCmd in formWsc parameter.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via FactoryPassword parameter or bootmode parameter of a certain URL.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via filename parameter.

An exploitable privilege escalation vulnerability exists in the WebPro functionality of Aspire-derived NEC PBXes, including all versions of SV8100, SV9100, SL1100 and SL2100 devices. A specially crafted HTTP POST can cause privilege escalation resulting in a higher privileged account, including an undocumented developer level of access.

Aterm WF1200CR and Aterm WG1200CR (Aterm WF1200CR firmware Ver1.1.1 and earlier, Aterm WG1200CR firmware Ver1.0.1 and earlier) allows authenticated attackers to execute arbitrary OS commands via unspecified vectors.

Multiple buffer overflows in NEC SOCKS5 1.0 r11 and earlier allow remote attackers to cause a denial of service and possibly execute arbitrary code via a long username to (1) the GetString function in proxy.c for the SOCKS5 module or (2) the HandleS4Connection function in proxy.c for the SOCKS4 module.

Stack-based buffer overflow in SocksCap 2.40-051231 and earlier, when "Resolve all names remotely" is enabled, allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a long hostname.

A heap-buffer overflow was found in the way samba clients processed extra long filename in a directory listing. A malicious samba server could use this flaw to cause arbitrary code execution on a samba client. Samba versions before 4.6.16, 4.7.9 and 4.8.4 are vulnerable.

A vulnerability was discovered in SPICE before version 0.14.1 where the generated code used for demarshalling messages lacked sufficient bounds checks. A malicious client or server, after authentication, could send specially crafted messages to its peer which would result in a crash or, potentially, other impacts.

A vulnerability was detected in OFFIS DCMTK up to 3.6.9. Affected by this issue is the function DcmByteString::makeDicomByteString of the file dcmdata/libsrc/dcbytstr.cc of the component dcmdata. The manipulation results in memory corruption. The attack can be launched remotely. Upgrading to version 3.7.0 can resolve this issue. The patch is identified as 4c0e5c10079392c594d6a7abd95dd78ac0aa556a. You should upgrade the affected component.

Buffer overflow in certain client utilities in OpenAFS before 1.6.2 allows remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via a long fileserver ACL entry.

Stack-based buffer overflow in the receive_tcppacket function in net_packet.c in tinc before 1.0.21 and 1.1 before 1.1pre7 allows remote authenticated peers to cause a denial of service (crash) or possibly execute arbitrary code via a large TCP packet.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'read' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'read <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

A stack buffer overflow vulnerability has been discovered in Microsoft Skype 7.2, 7.35, and 7.36 before 7.37, involving MSFTEDIT.DLL mishandling of remote RDP clipboard content within the message box.

KadNode version version 2.2.0 contains a Buffer Overflow vulnerability in Arguments when starting up the binary that can result in Control of program execution flow, leading to remote code execution.

Apache PLC4X - PLC4C (Only the C language implementation was effected) was vulnerable to an unsigned integer underflow flaw inside the tcp transport. Users should update to 0.9.1, which addresses this issue. However, in order to exploit this vulnerability, a user would have to actively connect to a mallicious device which could send a response with invalid content. Currently we consider the probability of this being exploited as quite minimal, however this could change in the future, especially with the industrial networks growing more and more together.

Heap-based buffer overflow in the substr function in parsing.c in cgit 0.9.0.3 and earlier allows remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via an empty username in the "Author" field in a commit.

Heap-based buffer overflow in chan_skinny.c in the Skinny channel driver in Asterisk Open Source 1.6.2.x before 1.6.2.24, 1.8.x before 1.8.11.1, and 10.x before 10.3.1 allows remote authenticated users to cause a denial of service or possibly have unspecified other impact via a series of KEYPAD_BUTTON_MESSAGE events.

An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of adding new routes to the device. It seems that the POST parameters passed in this request to set up routes on the device can be set in such a way that would result in overflowing the stack set up and allow an attacker to control the $ra register stored on the stack. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST request. The POST parameter "gateway" allows to overflow the stack and control the $ra register after 1546 characters. The value from this post parameter is then copied on the stack at address 0x00421348 as shown below. This allows an attacker to provide the payload of his/her choice and finally take control of the device.

Remote code execution can occur in Asterisk Open Source 13.x before 13.14.1 and 14.x before 14.3.1 and Certified Asterisk 13.13 before 13.13-cert3 because of a buffer overflow in a CDR user field, related to X-ClientCode in chan_sip, the CDR dialplan function, and the AMI Monitor action.

Multiple buffer overflows in the ctl_put* functions in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allow remote authenticated users to have unspecified impact via a long variable.

Stack-based buffer overflow in the reslist function in ntpq in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote servers have unspecified impact via a long flagstr variable in a restriction list response.

spice versions though 0.13 are vulnerable to out-of-bounds memory access when processing specially crafted messages from authenticated attacker to the spice server resulting into crash and/or server memory leak.

Multiple buffer overflows in gram.y for PostgreSQL 8.0.1 and earlier may allow attackers to execute arbitrary code via (1) a large number of variables in a SQL statement being handled by the read_sql_construct function, (2) a large number of INTO variables in a SELECT statement being handled by the make_select_stmt function, (3) a large number of arbitrary variables in a SELECT statement being handled by the make_select_stmt function, and (4) a large number of INTO variables in a FETCH statement being handled by the make_fetch_stmt function, a different set of vulnerabilities than CVE-2005-0245.

Vyper is a Pythonic Smart Contract Language for the EVM. In affected versions when performing a function call inside a literal struct, there is a memory corruption issue that occurs because of an incorrect pointer to the the top of the stack. This issue has been resolved in version 0.3.0.

A stack buffer overflow flaw was found in the Quick Emulator (QEMU) before 2.9 built with the Network Block Device (NBD) client support. The flaw could occur while processing server's response to a 'NBD_OPT_LIST' request. A malicious NBD server could use this issue to crash a remote NBD client resulting in DoS or potentially execute arbitrary code on client host with privileges of the QEMU process.

Buffer overflow in WG-C10 v3.0.79 and earlier allows an attacker to execute arbitrary commands via unspecified vectors.

The affected product’s code base doesn’t properly control arguments for specific functions, which could lead to a stack overflow.

A flaw has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. The impacted element is the function urlFilterManageRule of the file /goform/urlFilterManageRule. Executing manipulation of the argument urlFilterRuleName/scheduleUrl/addURLFilter can lead to stack-based buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

Stack-based buffer overflow in the acl_get function in Oracle MySQL 5.5.19 and other versions through 5.5.28, and 5.1.53 and other versions through 5.1.66, and MariaDB 5.5.2.x before 5.5.28a, 5.3.x before 5.3.11, 5.2.x before 5.2.13 and 5.1.x before 5.1.66, allows remote authenticated users to execute arbitrary code via a long argument to the GRANT FILE command.

An exploitable buffer overflow vulnerability exists in the PubNub message handler for the "control" channel of Insteon Hub running firmware version 1012. Specially crafted replies received from the PubNub service can cause buffer overflows on a global section overwriting arbitrary data. A strcpy overflows the buffer insteon_pubnub.channel_cc_r, which has a size of 16 bytes. An attacker can send an arbitrarily long "c_r" parameter in order to exploit this vulnerability. An attacker should impersonate PubNub and answer an HTTPS GET request to trigger this vulnerability.

Buffer overflow in the ParseCommand function in hpgl-input.c in the hpgltops program for CUPS 1.1.22 allows remote attackers to execute arbitrary code via a crafted HPGL file.

IBM Domino 8.5.3, and 9.0 is vulnerable to a stack based overflow in the IMAP service that could allow an authenticated attacker to execute arbitrary code by specifying a large mailbox name. IBM X-Force ID: 124749.

Heap-based buffer overflow in the SMB implementation in NetApp Clustered Data ONTAP before 8.3.2P8 and 9.0 before P2 allows remote authenticated users to cause a denial of service or execute arbitrary code.

Buffer overflow in Bip 0.8.8 and earlier might allow remote authenticated users to execute arbitrary code via vectors involving a series of TCP connections that triggers use of many open file descriptors.

In the X.Org X server before 2017-06-19, a user authenticated to an X Session could crash or execute code in the context of the X Server by exploiting a stack overflow in the endianness conversion of X Events.

Heap-based buffer overflow in IBM WebSphere MQ 6.0 before 6.0.2.11 and 7.0 before 7.0.1.5 allows remote authenticated users to execute arbitrary code or cause a denial of service (queue manager crash) by inserting an invalid message into the queue.