Remote code execution can occur in Asterisk Open Source 13.x before 13.14.1 and 14.x before 14.3.1 and Certified Asterisk 13.13 before 13.13-cert3 because of a buffer overflow in a CDR user field, related to X-ClientCode in chan_sip, the CDR dialplan function, and the AMI Monitor action.

Stack-based buffer overflow in the reslist function in ntpq in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote servers have unspecified impact via a long flagstr variable in a restriction list response.

A heap overflow vulnerability in Citrix NetScaler Gateway versions 10.1 before 135.8/135.12, 10.5 before 65.11, 11.0 before 70.12, and 11.1 before 52.13 allows a remote authenticated attacker to run arbitrary commands via unspecified vectors.

Multiple buffer overflows in the ctl_put* functions in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allow remote authenticated users to have unspecified impact via a long variable.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

Geo++ GNCASTER 1.4.0.7 and earlier allows remote authenticated users to cause a denial of service (application crash) and possibly execute arbitrary code via a long NMEA data sentence.

Heap-based buffer overflow in IBM DB2 9.1 before FP9, 9.5 before FP6, and 9.7 before FP2 allows remote authenticated users to have an unspecified impact via a SELECT statement that has a long column name generated with the REPEAT function.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A stack buffer overflow flaw was found in the Quick Emulator (QEMU) before 2.9 built with the Network Block Device (NBD) client support. The flaw could occur while processing server's response to a 'NBD_OPT_LIST' request. A malicious NBD server could use this issue to crash a remote NBD client resulting in DoS or potentially execute arbitrary code on client host with privileges of the QEMU process.

Buffer overflow in certain client utilities in OpenAFS before 1.6.2 allows remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via a long fileserver ACL entry.

Stack-based buffer overflow in the receive_tcppacket function in net_packet.c in tinc before 1.0.21 and 1.1 before 1.1pre7 allows remote authenticated peers to cause a denial of service (crash) or possibly execute arbitrary code via a large TCP packet.

A buffer overflow vulnerability in "Add command" functionality exists in Flexense SyncBreeze Enterprise <= 10.3.14. The vulnerability can be triggered by an authenticated attacker who submits more than 5000 characters as the command name. It will cause termination of the SyncBreeze Enterprise server and possibly remote command execution with SYSTEM privilege.

Stack-based buffer overflow in the acl_get function in Oracle MySQL 5.5.19 and other versions through 5.5.28, and 5.1.53 and other versions through 5.1.66, and MariaDB 5.5.2.x before 5.5.28a, 5.3.x before 5.3.11, 5.2.x before 5.2.13 and 5.1.x before 5.1.66, allows remote authenticated users to execute arbitrary code via a long argument to the GRANT FILE command.

In Tensorflow version 2.3.0, the `SparseCountSparseOutput` and `RaggedCountSparseOutput` implementations don't validate that the `weights` tensor has the same shape as the data. The check exists for `DenseCountSparseOutput`, where both tensors are fully specified. In the sparse and ragged count weights are still accessed in parallel with the data. But, since there is no validation, a user passing fewer weights than the values for the tensors can generate a read from outside the bounds of the heap buffer allocated for the weights. The issue is patched in commit 3cbb917b4714766030b28eba9fb41bb97ce9ee02 and is released in TensorFlow version 2.3.1.

In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, the implementation of `SparseFillEmptyRowsGrad` uses a double indexing pattern. It is possible for `reverse_index_map(i)` to be an index outside of bounds of `grad_values`, thus resulting in a heap buffer overflow. The issue is patched in commit 390611e0d45c5793c7066110af37c8514e6a6c54, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

Heap-based buffer overflow in the substr function in parsing.c in cgit 0.9.0.3 and earlier allows remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via an empty username in the "Author" field in a commit.

A Buffer Overflow issue was discovered in Asterisk Open Source 13 before 13.18.1, 14 before 14.7.1, and 15 before 15.1.1 and Certified Asterisk 13.13 before 13.13-cert7. No size checking is done when setting the user field for Party B on a CDR. Thus, it is possible for someone to use an arbitrarily large string and write past the end of the user field storage buffer. NOTE: this is different from CVE-2017-7617, which was only about the Party A buffer.

Multiple stack-based buffer overflows in TP-Link WR940N WiFi routers with hardware version 4 allow remote authenticated users to execute arbitrary code via the (1) ping_addr parameter to PingIframeRpm.htm or (2) dnsserver2 parameter to WanStaticIpV6CfgRpm.htm.

An exploitable buffer overflow vulnerability exists in the PubNub message handler for the "control" channel of Insteon Hub running firmware version 1012. Specially crafted replies received from the PubNub service can cause buffer overflows on a global section overwriting arbitrary data. A strcpy overflows the buffer insteon_pubnub.channel_cc_r, which has a size of 16 bytes. An attacker can send an arbitrarily long "c_r" parameter in order to exploit this vulnerability. An attacker should impersonate PubNub and answer an HTTPS GET request to trigger this vulnerability.

On Insteon Hub 2245-222 devices with firmware version 1012, specially crafted replies received from the PubNub service can cause buffer overflows on a global section overwriting arbitrary data. An attacker should impersonate PubNub and answer an HTTPS GET request to trigger this vulnerability. A strcpy overflows the buffer insteon_pubnub.channel_ad_r, which has a size of 16 bytes. An attacker can send an arbitrarily long "ad_r" parameter in order to exploit this vulnerability.

In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, by calling an IPA ioctl and searching for routing/filer/hdr rule handle from ipa_idr pointer using ipa_idr_find() function, the wrong structure pointer can be returned resulting in a slab out of bound access in the IPA driver.

On Insteon Hub 2245-222 devices with firmware version 1012, specially crafted replies received from the PubNub service can cause buffer overflows on a global section overwriting arbitrary data. An attacker should impersonate PubNub and answer an HTTPS GET request to trigger this vulnerability. A strcpy overflows the buffer insteon_pubnub.channel_ak, which has a size of 16 bytes. An attacker can send an arbitrarily long "ak" parameter in order to exploit this vulnerability.

A vulnerability, which was classified as critical, has been found in D-Link DAP-1320 1.00. Affected by this issue is the function replace_special_char of the file /storagein.pd-XXXXXX. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

IBM Domino 8.5.3, and 9.0 is vulnerable to a stack based overflow in the IMAP service that could allow an authenticated attacker to execute arbitrary code by specifying a large mailbox name. IBM X-Force ID: 124749.

HP Color LaserJet Pro M280-M281 Multifunction Printer series (before v. 20190419), HP LaserJet Pro MFP M28-M31 Printer series (before v. 20190426) may have embedded web server attributes which may be potentially vulnerable to Buffer Overflow.

Heap-based buffer overflow in the SMB implementation in NetApp Clustered Data ONTAP before 8.3.2P8 and 9.0 before P2 allows remote authenticated users to cause a denial of service or execute arbitrary code.

In the X.Org X server before 2017-06-19, a user authenticated to an X Session could crash or execute code in the context of the X Server by exploiting a stack overflow in the endianness conversion of X Events.

A vulnerability was discovered in SPICE before 0.13.90 in the server's protocol handling. An authenticated attacker could send crafted messages to the SPICE server causing a heap overflow leading to a crash or possible code execution.

Use of Out-of-range Pointer Offset in GitHub repository vim/vim prior to 8.2.4440.

Stack-based buffer overflow in cgi-bin/cgi_main in NUUO NVRmini 2 1.7.6 through 3.0.0 and NETGEAR ReadyNAS Surveillance 1.1.2 allows remote authenticated users to execute arbitrary code via the sn parameter to the transfer_license command.

Apache PLC4X - PLC4C (Only the C language implementation was effected) was vulnerable to an unsigned integer underflow flaw inside the tcp transport. Users should update to 0.9.1, which addresses this issue. However, in order to exploit this vulnerability, a user would have to actively connect to a mallicious device which could send a response with invalid content. Currently we consider the probability of this being exploited as quite minimal, however this could change in the future, especially with the industrial networks growing more and more together.

Buffer overflow in tibemsd in the server in TIBCO Enterprise Message Service (EMS) before 8.3.0 and EMS Appliance before 2.4.0 allows remote authenticated users to cause a denial of service or possibly execute arbitrary code via crafted inbound data.

Multiple buffer overflows in IBM Rational ClearCase 7.x before 7.1.2.13, 8.0.0.x before 8.0.0.10, and 8.0.1.x before 8.0.1.3 allow remote authenticated users to obtain privileged access via unspecified vectors.

Vyper is a Pythonic Smart Contract Language for the EVM. In affected versions when performing a function call inside a literal struct, there is a memory corruption issue that occurs because of an incorrect pointer to the the top of the stack. This issue has been resolved in version 0.3.0.

Heap-based buffer overflow in the IMAP service in Qbik WinGate 6.2.2.1137 and earlier allows remote authenticated users to cause a denial of service (resource exhaustion) or possibly execute arbitrary code via a long argument to the LIST command. NOTE: some of these details are obtained from third party information.

A vulnerability classified as critical has been found in TOTOLINK N150RT 3.4.0-B20190525. Affected is an unknown function of the file /boafrm/formPortFw. The manipulation of the argument service_type leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Netgear EX6200 1.0.3.94. It has been declared as critical. This vulnerability affects the function sub_54340. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in TOTOLINK N150RT 3.4.0-B20190525 and classified as critical. This vulnerability affects unknown code of the file /boafrm/formWlwds. The manipulation of the argument submit-url leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in TOTOLINK N150RT 3.4.0-B20190525. This affects an unknown part of the file /boafrm/formWdsEncrypt. The manipulation of the argument submit-url leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in Tenda W12 and i24 3.0.0.4(2887)/3.0.0.5(3644). Affected by this vulnerability is the function cgidhcpsCfgSet of the file /goform/modules of the component httpd. The manipulation of the argument json leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Buffer overflow in the C_SAPGPARAM function in the NetWeaver Dispatcher in SAP KERNEL 7.00 (7000.52.12.34966) and 7.40 (7400.12.21.30308) allows remote authenticated users to cause a denial of service or possibly execute arbitrary code via unspecified vectors, aka SAP Security Note 2063369.

Heap-based buffer overflow in chrony before 1.31.1 allows remote authenticated users to cause a denial of service (chronyd crash) or possibly execute arbitrary code by configuring the (1) NTP or (2) cmdmon access with a subnet size that is indivisible by four and an address with a nonzero bit in the subnet remainder.

A vulnerability was found in Tenda AC1206 15.03.06.23. It has been classified as critical. Affected is the function form_fast_setting_wifi_set of the file /goform/fast_setting_wifi_set. The manipulation of the argument ssid/timeZone leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Other parameters might be affected as well.

Buffer overflow in the SAP NetWeaver Dispatcher in SAP Kernel 7.00 32-bit and 7.40 64-bit allows remote authenticated users to cause a denial of service or possibly execute arbitrary code via unspecified vectors, related to the ABAP VM, aka SAP Note 2059734.

Buffer overflow in the SAP NetWeaver Dispatcher in SAP Kernel 7.00 32-bit and 7.40 64-bit allows remote authenticated users to cause a denial of service or possibly execute arbitrary code via unspecified vectors, related to the Spool System, aka SAP Note 2061271.