I-O DATA DEVICE TS-WRLP firmware version 1.01.02 and earlier and TS-WRLA firmware version 1.01.02 and earlier allows an attacker with administrator rights to execute arbitrary OS commands via unspecified vectors.

A Command Injection vulnerability exists in FortiManager 5.2.1 and earlier and FortiManager 5.0.10 and earlier via unspecified vectors, which could let a malicious user run systems commands when executing a report.

A vulnerability, which was classified as critical, has been found in Totolink X6000R 9.4.0cu.852_20230719. This issue affects the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi of the component shttpd. The manipulation of the argument ip leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-256313 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Softaculous Webuzo contains a command injection vulnerability in the FTP management functionality. A remote, authenticated attacker can exploit this vulnerability to gain code execution on the system.

Softaculous Webuzo contains a command injection in the password reset functionality. A remote, authenticated attacker can exploit this vulnerability to gain code execution on the system.

Symantec Web Gateway (SWG) before 5.2.5 allows remote authenticated users to execute arbitrary OS commands.

An issue was discovered in RiteCMS 2.2.1. An authenticated user can directly execute system commands by uploading a php web shell in the "Filemanager" section.

The web-based GUI in Cisco Cloud Services Platform (CSP) 2100 2.0 allows remote authenticated administrators to execute arbitrary OS commands as root via crafted platform commands, aka Bug ID CSCva00541.

cgi-bin/cgi_main in NUUO NVRmini 2 1.7.6 through 3.0.0 and NETGEAR ReadyNAS Surveillance 1.1.2 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the sn parameter to the transfer_license command.

An OS command injection vulnerability in PAN-OS management interface allows an authenticated administrator to execute arbitrary OS commands with root privileges. This issue affects: All versions of PAN-OS 7.1 and 8.0; PAN-OS 8.1 versions earlier than 8.1.14; PAN-OS 9.0 versions earlier than 9.0.7.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 41 of 46).

Fortinet FortiWan (formerly AscernLink) before 4.2.5 allows remote authenticated users with access to the nslookup functionality to execute arbitrary commands with root privileges via the graph parameter to diagnosis_control.php.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 46 of 46).

AutoGPT, a component of significant-gravitas/autogpt, is vulnerable to an improper neutralization of special elements used in an OS command ('OS Command Injection') due to a flaw in its shell command validation function. Specifically, the vulnerability exists in versions v0.5.0 up to but not including 5.1.0. The issue arises from the application's method of validating shell commands against an allowlist or denylist, where it only checks the first word of the command. This allows an attacker to bypass the intended restrictions by crafting commands that are executed despite not being on the allowlist or by including malicious commands not present in the denylist. Successful exploitation of this vulnerability could allow an attacker to execute arbitrary shell commands.

IBM Security Access Manager for Web 7.0 before IF2 and 8.0 before 8.0.1.4 IF3 and Security Access Manager 9.0 before 9.0.1.0 IF5 allow remote authenticated users to execute arbitrary commands by leveraging LMI admin access.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 6 of 46).

IBM QRadar SIEM 7.1 before MR2 Patch 13 and 7.2 before 7.2.7 executes unspecified processes at an incorrect privilege level, which makes it easier for remote authenticated users to obtain root access by leveraging a command-injection issue.

NETGEAR DGN2200v4 devices before 2017-01-06 are affected by command execution and an FTP insecure root directory.

Seeds acmailer before 3.8.21 and 3.9.x before 3.9.15 Beta allows remote authenticated users to execute arbitrary OS commands via unspecified vectors.

A Command Injection vulnerability in httpd web server (setup.cgi) in SerComm h500s, FW: lowi-h500s-v3.4.22 allows logged in administrators to arbitrary OS commands as root in the device via the connection_type parameter of the statussupport_diagnostic_tracing.json endpoint.

The Device Manager GUI in Cisco Application Control Engine (ACE) 4710 A5 before A5(3.1) allows remote authenticated users to bypass intended RBAC restrictions and execute arbitrary CLI commands with admin privileges via an unspecified parameter in a POST request, aka Bug ID CSCul84801.

Ruckus Wireless H500 web management interface authenticated command injection

setSystemCommand on D-Link DCS-930L devices before 2.12 allows a remote attacker to execute code via an OS command in the SystemCommand parameter.

A vulnerability was found in Roxy-WI up to 8.1.3. It has been declared as critical. Affected by this vulnerability is the function action_service of the file app/modules/roxywi/roxy.py. The manipulation of the argument action/service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 8.1.4 is able to address this issue. The identifier of the patch is 32313928eb9ce906887b8a30bf7b9a3d5c0de1be. It is recommended to upgrade the affected component.

pfSense before 2.3 allows remote authenticated users to execute arbitrary OS commands via a '|' character in the status_rrd_graph_img.php graph parameter, related to _rrd_graph_img.php.

GLPI is an open source IT Asset Management, issue tracking system and service desk system. The GLPI addressing plugin in versions < 2.9.1 suffers from authenticated Remote Code Execution vulnerability, allowing access to the server's underlying operating system using command injection abuse of functionality. There is no workaround for this issue and users are advised to upgrade or to disable the addressing plugin.

In QuickBox Pro v2.5.8 and below, the config.php file has a variable which takes a GET parameter value and parses it into a shell_exec(''); function without properly sanitizing any shell arguments, therefore remote code execution is possible. Additionally, as the media server is running as root by default attackers can use the sudo command within this shell_exec(''); function, which allows for privilege escalation by means of RCE.

An issue was discovered on Victure WR1200 devices through 1.0.3. A command injection vulnerability was found within the web interface of the device, allowing an attacker with valid credentials to inject arbitrary shell commands to be executed by the device with root privileges. This occurs in the ping and traceroute features. An attacker would thus be able to use this vulnerability to open a reverse shell on the device with root privileges.

MitraStar GPT-2541GNAC-N1 (HGU) 100VNZ0b33 devices allow remote authenticated users to obtain root access by executing command "deviceinfo show file &&/bin/bash" because of incorrect sanitization of parameter "path".

mailcow is a mailserver suite. Prior to mailcow-dockerized version 2022-06a, an extended privilege vulnerability can be exploited by manipulating the custom parameters regexmess, skipmess, regexflag, delete2foldersonly, delete2foldersbutnot, regextrans2, pipemess, or maxlinelengthcmd to execute arbitrary code. Users should update their mailcow instances with the `update.sh` script in the mailcow root directory to 2022-06a or newer to receive a patch for this issue. As a temporary workaround, the Syncjob ACL can be removed from all mailbox users, preventing changes to those settings.

IBM BigFix Platform 9.0, 9.1 before 9.1.8, and 9.2 before 9.2.8 allow remote authenticated users to execute arbitrary commands by leveraging report server access. IBM X-Force ID: 111302.

An authenticated attacker can send a specially crafted route to the “edit_route.cgi” binary and have it execute shell commands. This vulnerability impacts products based on HID Mercury Intelligent Controllers LP1501, LP1502, LP2500, LP4502, and EP4502 which contain firmware versions prior to 1.303 for the LP series and 1.297 for the EP series. An attacker with this level of access on the device can monitor all communications sent to and from this device, modify onboard relays, change configuration files, or cause the device to become unstable.

The expansion of '\h' in the prompt string in bash 4.3 allows remote authenticated users to execute arbitrary code via shell metacharacters placed in 'hostname' of a machine.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWeb version 6.4.1 and below, 6.3.15 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests.

mailcow before 2022-05d allows a remote authenticated user to inject OS commands and escalate privileges to domain admin via the --debug option in conjunction with the ---PIPEMESS option in Sync Jobs.

TRENDnet TEW-827DRU devices through 2.06B04 contain multiple command injections in apply.cgi via the action pppoe_connect, ru_pppoe_connect, or dhcp_connect with the key wan_ifname (or wan0_dns), allowing an authenticated user to run arbitrary commands on the device.

A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system and execute them using root-level privileges. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as a user with root-level privileges.

icewind1991 SMB before 1.0.3 allows remote authenticated users to execute arbitrary SMB commands via shell metacharacters in the user argument in the (1) listShares function in Server.php or the (2) connect or (3) read function in Share.php.

The admin web interface in Cisco AsyncOS 8.x before 8.0.8-113, 8.1.x and 8.5.x before 8.5.3-051, 8.6.x and 8.7.x before 8.7.0-171-LD, and 8.8.x before 8.8.0-085 on Web Security Appliance (WSA) devices allows remote authenticated users to obtain root privileges via crafted certificate-generation arguments, aka Bug ID CSCus83445.

IBM FileNet Content Manager 5.5.4, 5.5.6, and 5.5.7 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 212346.

Vulnerability in the product Docsis 3.0 UBC1319BA00 Router supported affected version 1319010201r009. The vulnerability allows an attacker with privileges and network access through the ping.cmd component to execute commands on the device.

The external SMB storage driver in ownCloud Server before 6.0.8, 7.0.x before 7.0.6, and 8.0.x before 8.0.4 allows remote authenticated users to execute arbitrary SMB commands via a ; (semicolon) character in a file.

IBM Spectrum Scale 4.2 and 5.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 172093.

Authenticated Semi-Blind Command Injection (via Parameter Injection) exists on Altus Nexto, Nexto Xpress, and Hadron Xtorm devices via the getlogs.cgi tcpdump feature. This affects Nexto NX3003 1.8.11.0, Nexto NX3004 1.8.11.0, Nexto NX3005 1.8.11.0, Nexto NX3010 1.8.3.0, Nexto NX3020 1.8.3.0, Nexto NX3030 1.8.3.0, Nexto NX5100 1.8.11.0, Nexto NX5101 1.8.11.0, Nexto NX5110 1.1.2.8, Nexto NX5210 1.1.2.8, Nexto Xpress XP300 1.8.11.0, Nexto Xpress XP315 1.8.11.0, Nexto Xpress XP325 1.8.11.0, Nexto Xpress XP340 1.8.11.0, and Hadron Xtorm HX3040 1.7.58.0.

A command injection vulnerability was reported in the Integrated Management Module (IMM) of legacy IBM System x 3550 M3 and IBM System x 3650 M3 servers that could allow the execution of operating system commands over an authenticated SSH or Telnet session.

SAP NetWeaver Knowledge Management XML Forms versions - 7.10, 7.11, 7.30, 7.31, 7.40, 7.50, contains an XSLT vulnerability which allows a non-administrative authenticated attacker to craft a malicious XSL stylesheet file containing a script with OS-level commands, copy it into a location to be accessed by the system and then create a file which will trigger the XSLT engine to execute the script contained within the malicious XSL file. This can result in a full compromise of the confidentiality, integrity, and availability of the system.

Vesta Control Panel before 0.9.8-14 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the backup parameter to list/backup/index.php.

A remote arbitrary command execution vulnerability was discovered in HPE Aruba Instant (IAP) version(s): Aruba Instant 6.4.x.x: 6.4.4.8-4.2.4.18 and below; Aruba Instant 6.5.x.x: 6.5.4.20 and below; Aruba Instant 8.5.x.x: 8.5.0.12 and below; Aruba Instant 8.6.x.x: 8.6.0.11 and below; Aruba Instant 8.7.x.x: 8.7.1.3 and below. Aruba has released patches for Aruba Instant (IAP) that address this security vulnerability.

Multiple command injection vulnerabilities in the command line interpreter of FortiWeb versions 6.4.1, 6.4.0, 6.3.0 through 6.3.15, 6.2.0 through 6.2.6, and 6.1.0 through 6.1.2 may allow an authenticated attacker to execute arbitrary commands on the underlying system shell via specially crafted command arguments.

Dell EMC CloudLink 7.1 and all prior versions contain an OS command injection Vulnerability. A remote high privileged attacker, may potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application. Exploitation may lead to a system take over by an attacker. This vulnerability is considered critical as it may be leveraged to completely compromise the vulnerable application as well as the underlying operating system. Dell recommends customers to upgrade at the earliest opportunity.