A vulnerability classified as critical was found in Wifi-soft UniBox Controller up to 20250506. Affected by this vulnerability is an unknown functionality of the file /authentication/logout.php. The manipulation of the argument mac_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Artica Web Proxy 4.30.000000 allows an authenticated remote attacker to inject commands via the service-cmds parameter in cyrus.php. These commands are executed with root privileges via service_cmds_peform.

Cellopoint CelloOS v4.1.10 Build 20190922 does not validate URL inputted properly. With the cookie of the system administrator, attackers can inject and remotely execute arbitrary command to manipulate the system.

USVN (aka User-friendly SVN) before 1.0.9 allows remote code execution via shell metacharacters in the number_start or number_end parameter to LastHundredRequest (aka lasthundredrequestAction) in the Timeline module. NOTE: this may overlap CVE-2020-25069.

pphoto in Ariadne before 2.6 allows remote authenticated users with certain privileges to execute arbitrary shell commands via vectors related to PINP programs and the annotate command. NOTE: some of these details are obtained from third party information.

The administrative interface of Cohesive Networks vns3:vpn appliances before version 4.11.1 is vulnerable to authenticated remote code execution leading to server compromise.

The ping page of the administration panel in Telmat AccessLog <= 6.0 (TAL_20180415) allows an attacker to get root shell access via authenticated code injection over the network.

Using a specially crafted URL command, a remote authenticated user can execute commands as root on the G-Cam and G-Code (Firmware Versions 1.12.0.25 and prior as well as the limited Versions 1.12.13.2 and 1.12.14.5).

Privilege escalation of an authenticated user to root in Citrix SD-WAN center versions before 11.2.2, 11.1.2b and 10.2.8.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of installations of Marvell QConvergeConsole 5.5.0.64. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the isHPSmartComponent method of the GWTTestServiceImpl class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-10501.

ginkgosnmp.inc in HP System Management Homepage (SMH) allows remote authenticated users to execute arbitrary commands via shell metacharacters in the PATH_INFO to smhutil/snmpchp.php.en.

trixbox 2.8.0.4 has OS command injection via shell metacharacters in the lang parameter to /maint/modules/home/index.php.

An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation resulting in root shell. An attacker can inject OS commands into the remoteNetmask0= parameter in the "/goform/net\_Web\_get_value" uri to trigger this vulnerability.

In the EyesOfNetwork web interface (aka eonweb) 5.1-0, module\tool_all\tools\snmpwalk.php does not properly restrict popen calls, which allows remote attackers to execute arbitrary commands via shell metacharacters in a parameter.

Git before 2.10.5, 2.11.x before 2.11.4, 2.12.x before 2.12.5, 2.13.x before 2.13.6, and 2.14.x before 2.14.2 uses unsafe Perl scripts to support subcommands such as cvsserver, which allows attackers to execute arbitrary OS commands via shell metacharacters in a module name. The vulnerable code is reachable via git-shell even without CVS support.

NeDi 1.9C is vulnerable to Remote Command Execution. System-Snapshot.php improperly escapes shell metacharacters from a POST request. An attacker can exploit this by crafting an arbitrary payload (any system commands) that contains shell metacharacters via a POST request with a psw parameter. (This can also be exploited via CSRF.)

An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation resulting in root shell. An attacker can inject OS commands into the openvpnServer0_tmp= parameter in the "/goform/net\_Web\_get_value" uri to trigger this vulnerability.

An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation resulting in root shell. An attacker can inject OS commands into the remoteNetwork0= parameter in the "/goform/net\_Web\_get_value" uri to trigger this vulnerability.

In the EyesOfNetwork web interface (aka eonweb) 5.1-0, module\tool_all\tools\interface.php does not properly restrict exec calls, which allows remote attackers to execute arbitrary commands via shell metacharacters in the host_list parameter to module/tool_all/select_tool.php.

An Improper Neutralization of Special Elements used in an OS Command issue was discovered in Digium Asterisk GUI 2.1.0 and prior. An OS command injection vulnerability has been identified that may allow the execution of arbitrary code on the system through the inclusion of OS commands in the URL request of the program.

mailcow is a mailserver suite. Prior to mailcow-dockerized version 2022-06a, an extended privilege vulnerability can be exploited by manipulating the custom parameters regexmess, skipmess, regexflag, delete2foldersonly, delete2foldersbutnot, regextrans2, pipemess, or maxlinelengthcmd to execute arbitrary code. Users should update their mailcow instances with the `update.sh` script in the mailcow root directory to 2022-06a or newer to receive a patch for this issue. As a temporary workaround, the Syncjob ACL can be removed from all mailbox users, preventing changes to those settings.

An authenticated attacker can send a specially crafted route to the “edit_route.cgi” binary and have it execute shell commands. This vulnerability impacts products based on HID Mercury Intelligent Controllers LP1501, LP1502, LP2500, LP4502, and EP4502 which contain firmware versions prior to 1.303 for the LP series and 1.297 for the EP series. An attacker with this level of access on the device can monitor all communications sent to and from this device, modify onboard relays, change configuration files, or cause the device to become unstable.

T&W WIFI Repeater BE126 allows remote authenticated users to execute arbitrary code via shell metacharacters in the user parameter to cgi-bin/webupg.

IBM MQ Appliance 8.0 and 9.0 could allow an authenticated messaging administrator to execute arbitrary commands on the system, caused by command execution. IBM X-Force ID: 125730.

CouchDB administrative users can configure the database server via HTTP(S). Some of the configuration options include paths for operating system-level binaries that are subsequently launched by CouchDB. This allows an admin user in Apache CouchDB before 1.7.0 and 2.x before 2.1.1 to execute arbitrary shell commands as the CouchDB user, including downloading and executing scripts from the public internet.

A vulnerability, which was classified as critical, was found in Wifi-soft UniBox Controller up to 20250506. This affects an unknown part of the file /billing/pms_check.php. The manipulation of the argument ipaddress leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Wifi-soft UniBox Controller up to 20250506. Affected by this issue is some unknown functionality of the file /billing/test_accesscodelogin.php. The manipulation of the argument Password leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Command injection vulnerability in Trend Micro Smart Protection Server (Standalone) 3.1 and 3.2 server administration UI allows attackers with authenticated access to execute arbitrary code on vulnerable installations.

A vulnerability in the Secure Copy Protocol (SCP) server of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to access the shell of the underlying Linux operating system on the affected device. The vulnerability is due to improper input validation of command arguments. An attacker could exploit this vulnerability by using crafted arguments when opening a connection to the affected device. An exploit could allow the attacker to gain shell access with a non-root user account to the underlying Linux operating system on the affected device. Due to the system design, access to the Linux shell could allow execution of additional attacks that may have a significant impact on the affected system. This vulnerability affects Cisco devices that are running release 3.7.1, 3.6.3, or earlier releases of Cisco Enterprise NFV Infrastructure Software (NFVIS) when access to the SCP server is allowed on the affected device. Cisco NFVIS Releases 3.5.x and 3.6.x do allow access to the SCP server by default, while Cisco NFVIS Release 3.7.1 does not. Cisco Bug IDs: CSCvh25026.

An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation resulting in root shell. An attacker can inject OS commands into the rsakey\_name= parm in the "/goform/WebRSAKEYGen" uri to trigger this vulnerability.

An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation, resulting in a root shell. An attacker can inject OS commands into the ip= parm in the "/goform/net_WebPingGetValue" URI to trigger this vulnerability.

An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation resulting in root shell. An attacker can inject OS commands into the CN= parm in the "/goform/net_WebCSRGen" uri to trigger this vulnerability.

A vulnerability in the web UI of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary code and execute arbitrary commands at the underlying operating system level. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands at the underlying operating system level.

Users with permission to create or configure agents in Jenkins 1.37 and earlier could configure an EC2 agent to run arbitrary shell commands on the master node whenever the agent was supposed to be launched. Configuration of these agents now requires the 'Run Scripts' permission typically only granted to administrators.

ROOT version 6.9.03 and below is vulnerable to an authenticated shell metacharacter injection in the rootd daemon resulting in remote code execution

An exploitable OS Command Injection vulnerability exists in the web application 'ping' functionality of Moxa AWK-3131A Wireless Access Points running firmware 1.1. Specially crafted web form input can cause an OS Command Injection resulting in complete compromise of the vulnerable device. An attacker can exploit this vulnerability remotely.

I-O DATA DEVICE TS-WRLP firmware version 1.01.02 and earlier and TS-WRLA firmware version 1.01.02 and earlier allows an attacker with administrator rights to execute arbitrary OS commands via unspecified vectors.

A Command Injection vulnerability exists in FortiManager 5.2.1 and earlier and FortiManager 5.0.10 and earlier via unspecified vectors, which could let a malicious user run systems commands when executing a report.

Symantec Web Gateway (SWG) before 5.2.5 allows remote authenticated users to execute arbitrary OS commands.

mailcow before 2022-05d allows a remote authenticated user to inject OS commands and escalate privileges to domain admin via the --debug option in conjunction with the ---PIPEMESS option in Sync Jobs.

Tenda ONT GPON AC1200 Dual band WiFi HG9 v1.0.1 is vulnerable to Command Injection via the Ping function.

An issue was discovered in RiteCMS 2.2.1. An authenticated user can directly execute system commands by uploading a php web shell in the "Filemanager" section.

The web-based GUI in Cisco Cloud Services Platform (CSP) 2100 2.0 allows remote authenticated administrators to execute arbitrary OS commands as root via crafted platform commands, aka Bug ID CSCva00541.

cgi-bin/cgi_main in NUUO NVRmini 2 1.7.6 through 3.0.0 and NETGEAR ReadyNAS Surveillance 1.1.2 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the sn parameter to the transfer_license command.

An OS command injection vulnerability in PAN-OS management interface allows an authenticated administrator to execute arbitrary OS commands with root privileges. This issue affects: All versions of PAN-OS 7.1 and 8.0; PAN-OS 8.1 versions earlier than 8.1.14; PAN-OS 9.0 versions earlier than 9.0.7.

USU Oracle Optimization before 5.17.5 allows authenticated DataCollection users to achieve agent root access because some common OS commands are blocked but (for example) an OS command for base64 decoding is not blocked. NOTE: this is not an Oracle Corporation product.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 41 of 46).

Fortinet FortiWan (formerly AscernLink) before 4.2.5 allows remote authenticated users with access to the nslookup functionality to execute arbitrary commands with root privileges via the graph parameter to diagnosis_control.php.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 46 of 46).

IBM Security Access Manager for Web 7.0 before IF2 and 8.0 before 8.0.1.4 IF3 and Security Access Manager 9.0 before 9.0.1.0 IF5 allow remote authenticated users to execute arbitrary commands by leveraging LMI admin access.