An exploitable Permission Assignment vulnerability exists in the ACEManager EmbeddedAceSet_Task.cgi functionality of Sierra Wireless AirLink ES450 FW 4.9.3. The the binary the endpoint /cgi-bin/Embeded_Ace_TLSet_Task.cgi is a very similar endpoint that is designed for use with setting table values that can cause an arbitrary setting writes, resulting in the unverified changes to any system setting. An attacker can make an authenticated HTTP request, or run the binary as any user, to trigger this vulnerability.

An exploitable Permission Assignment vulnerability exists in the ACEManager EmbeddedAceSet_Task.cgi functionality of Sierra Wireless AirLink ES450 FW 4.9.3. The EmbeddedAceSet_Task.cgi executable is used to change MSCII configuration values within the configuration manager of the AirLink ES450. This binary does not have any restricted configuration settings, so once the MSCIID is discovered, any authenticated user can send configuration changes using the /cgi-bin/Embedded_Ace_Set_Task.cgi endpoint.

When configured in debugging mode by an authenticated user with administrative privileges, ALEOS 4.16 and earlier store the SHA512 hash of the common root password for that version in a directory accessible to a user with root privileges or equivalent access.

Several potential command injections vulnerabilities exist in the AT command interface of ALEOS before 4.11.0, and 4.9.4.

An API abuse vulnerability exists in the AT command API of ALEOS before 4.13.0, 4.9.5, 4.4.9 due to lack of length checking when handling certain user-provided values.

A buffer overflow exists in the SMS handler API of ALEOS before 4.13.0, 4.9.5, 4.9.4 that may allow code execution as root.

The ACENet service in Sierra Wireless ALEOS before 4.4.9, 4.5.x through 4.9.x before 4.9.5, and 4.10.x through 4.13.x before 4.14.0 allows remote attackers to execute arbitrary code via a buffer overflow.

A vulnerability, which was classified as critical, was found in EasyFTP 1.7.0.2. Affected is an unknown function of the component MKD Command Handler. The manipulation leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-250716.

A vulnerability in the web-based management interface of Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to execute arbitrary code or cause the web-based management process on the device to restart unexpectedly, resulting in a denial of service (DoS) condition. The attacker must have valid administrator credentials. This vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP input to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the web-based management process to restart, resulting in a DoS condition.

A vulnerability was found in SourceCodester Tourist Reservation System 1.0. It has been declared as critical. This vulnerability affects the function ad_writedata of the file System.cpp. The manipulation of the argument ad_code leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-256282 is the identifier assigned to this vulnerability.

Tenda W20E V16.01.0.6(3392) is vulnerable to Buffer Overflow.

Buffer overflow in the password management functionality in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote authenticated users to cause a denial of service (daemon crash) or possibly execute arbitrary code via a crafted key file.

A vulnerability classified as critical has been found in emqx neuron up to 2.10.0. Affected is the function handle_add_plugin in the library cmd.library of the file plugins/restful/plugin_handle.c. The manipulation leads to buffer overflow. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects D6220 before 1.0.0.38, D6400 before 1.0.0.74, D7000v2 before 1.0.0.74, D8500 before 1.0.3.39, DGN2200v4 before 1.0.0.102, DGN2200Bv4 before 1.0.0.102, EX3700 before 1.0.0.70, EX3800 before 1.0.0.70, EX6000 before 1.0.0.30, EX6100 before 1.0.2.22, EX6120 before 1.0.0.40, EX6130 before 1.0.0.22, EX6150 before 1.0.0.38, EX6200 before 1.0.3.86, EX7000 before 1.0.0.64, R6250 before 1.0.4.20, R6300v2 before 1.0.4.22, R6400 before 1.0.1.32, R6400v2 before 1.0.2.52, R6700 before 1.0.1.44, R6900 before 1.0.1.44, R6900P before 1.3.0.18, R7000 before 1.0.9.28, R7000P before 1.3.0.18, R7300DST before 1.0.0.62, R7900 before 1.0.2.10, R7900P before 1.3.0.10, R8000 before 1.0.4.12, R8000P before 1.3.0.10, R8300 before 1.0.2.116, R8500 before 1.0.2.116, WN2500RPv2 before 1.0.1.52, WNDR3400v3 before 1.0.1.18, and WNR3500Lv2 before 1.2.0.46.

A vulnerability was found in Totolink X2000R 1.0.0-B20221212.1452. It has been declared as critical. This vulnerability affects the function formTmultiAP of the file /bin/boa of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-249856. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A buffer overflow vulnerability exists in Linksys WRT54GL Wireless-G Broadband Router with firmware <= 4.30.18.006. A stack-based buffer overflow in the Start_EPI function within the httpd binary allows an authenticated attacker with administrator privileges to execute arbitrary commands on the underlying Linux operating system as root. This vulnerablity can be triggered over the network via a malicious POST request to /apply.cgi.

In Weidmueller Industrial WLAN devices in multiple versions an exploitable remote code execution vulnerability exists in the iw_webs configuration parsing functionality. A specially crafted user name entry can cause an overflow of an error message buffer, resulting in remote code execution. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QuTS hero h5.1.4.2596 build 20231128 and later

Multiple buffer overflow security vulnerabilities have been identified in HPE iLO Amplifier Pack version(s): Prior to 2.12. These vulnerabilities could be exploited by a highly privileged user to remotely execute code that could lead to a loss of confidentiality, integrity, and availability. HPE has provided a software update to resolve this vulnerability in HPE iLO Amplifier Pack.

Multiple buffer overflows in contrib/pgcrypto in PostgreSQL before 9.0.19, 9.1.x before 9.1.15, 9.2.x before 9.2.10, 9.3.x before 9.3.6, and 9.4.x before 9.4.1 allow remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via unspecified vectors.

The to_char function in PostgreSQL before 9.0.19, 9.1.x before 9.1.15, 9.2.x before 9.2.10, 9.3.x before 9.3.6, and 9.4.x before 9.4.1 allows remote authenticated users to cause a denial of service (crash) or possibly execute arbitrary code via a (1) large number of digits when processing a numeric formatting template, which triggers a buffer over-read, or (2) crafted timestamp formatting template, which triggers a buffer overflow.

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.3.2578 build 20231110 and later QuTS hero h5.1.3.2578 build 20231110 and later QuTScloud c5.1.5.2651 and later

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTScloud c5.1.5.2651 and later

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QuTS hero h5.1.4.2596 build 20231128 and later

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QuTS hero h5.1.4.2596 build 20231128 and later

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.3.2578 build 20231110 and later QuTS hero h5.1.3.2578 build 20231110 and later QuTScloud c5.1.5.2651 and later

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.2.2533 build 20230926 and later QuTS hero h5.1.2.2534 build 20230927 and later QuTScloud c5.1.5.2651 and later

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.2.2533 build 20230926 and later QuTS hero h5.1.2.2534 build 20230927 and later QuTScloud c5.1.5.2651 and later

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.2.2533 build 20230926 and later QuTS hero h5.1.2.2534 build 20230927 and later QuTScloud c5.1.5.2651 and later

A heap-based buffer overflow vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.2.2533 build 20230926 and later QuTS hero h5.1.2.2534 build 20230927 and later QuTScloud c5.1.5.2651 and later

Skyworth Digital Technology RN510 V.3.1.0.4 RN510 V.3.1.0.4 contains a buffer overflow vulnerability in /cgi-bin/app-staticIP.asp. An authenticated attacker can send a specially crafted request to endpoint which can lead to a denial of service (DoS) or possible code execution on the device.

A specially crafted TCP/IP packet may cause the camera recovery image web interface to crash. It may also cause a buffer overflow which could enable remote code execution. The recovery image can only be booted with administrative rights or with physical access to the camera and allows the upload of a new firmware in case of a damaged firmware.

A vulnerability in Pulse Connect Secure before 9.1R12 could allow an authenticated administrator or compromised Pulse Connect Secure device in a load-balanced configuration to perform a buffer overflow via a malicious crafted web request.

On BIG-IP DNS and GTM version 13.1.x before 13.1.0.4, and all versions of 12.1.x and 11.6.x, big3d does not securely handle and parse certain payloads resulting in a buffer overflow. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.

A specially crafted TCP/IP packet may cause a camera recovery image telnet interface to crash. It may also cause a buffer overflow which could enable remote code execution. The recovery image can only be booted with administrative rights or with physical access to the camera and allows the upload of a new firmware in case of a damaged firmware.

Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'vpn l2tp advanced name WORD dns (yes|no) mtu <128-16384> mru <128-16384> auth (on|off) password (WORD|null) options WORD' command template.

Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'no vpn l2tp advanced name WORD dns (yes|no) mtu <128-16384> mru <128-16384> auth (on|off) password (WORD|null)' command template.

Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'vpn pptp advanced name WORD dns (yes|no) mtu <128-16384> mru <128-16384> mppe (on|off) stateful (on|off)' command template.

Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'wlan filter mac address WORD descript WORD' command template.

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.0.1.2425 build 20230609 and later QTS 5.1.0.2444 build 20230629 and later QTS 4.5.4.2467 build 20230718 and later QuTS hero h5.0.1.2515 build 20230907 and later QuTS hero h5.1.0.2424 build 20230609 and later QuTS hero h4.5.4.2476 build 20230728 and later QuTScloud c5.1.0.2498 and later

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.0.1.2514 build 20230906 and later QTS 5.1.2.2533 build 20230926 and later QuTS hero h5.0.1.2515 build 20230907 and later QuTS hero h5.1.2.2534 build 20230927 and later

Some Dahua products have buffer overflow vulnerabilities. After the successful login of the legal account, the attacker sends a specific DDNS test command, which may cause the device to go down.

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.0.1.2425 build 20230609 and later QTS 5.1.0.2444 build 20230629 and later QTS 4.5.4.2467 build 20230718 and later QuTS hero h5.0.1.2515 build 20230907 and later QuTS hero h5.1.0.2424 build 20230609 and later QuTS hero h4.5.4.2476 build 20230728 and later QuTScloud c5.1.0.2498 and later

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.0.1.2425 build 20230609 and later QTS 5.1.0.2444 build 20230629 and later QTS 4.5.4.2467 build 20230718 and later QuTS hero h5.0.1.2515 build 20230907 and later QuTS hero h5.1.0.2424 build 20230609 and later QuTS hero h4.5.4.2476 build 20230728 and later QuTScloud c5.1.0.2498 and later

Buffer overflow vulnerability in Nintendo Wi-Fi Network Adaptor WAP-001 All versions allows an attacker with an administrative privilege to execute arbitrary code via unspecified vectors.

A buffer overflow issue was discovered in ZOOK solution(remote administration tool) through processing 'ConnectMe' command while parsing a crafted OUTERIP value because of missing boundary check. This vulnerability allows the attacker to execute remote arbitrary command.

A buffer overflow in WatchGuard Fireware OS could may allow an authenticated remote attacker with privileged management access to execute arbitrary code with system privileges on the firewall. This issue affects Fireware OS: from 11.9.6 through 12.10.3.