Vulnerability of incomplete read and write permission verification in the GPU module. Successful exploitation of this vulnerability may affect service confidentiality, integrity, and availability.
Vulnerability of incomplete read and write permission verification in the GPU module. Successful exploitation of this vulnerability may affect service confidentiality, integrity, and availability.
An authorization bypass vulnerability in Monitorr v1.7.6m in Monitorr/assets/config/_installation/_register.php allows an unauthorized person to create valid credentials.
A vulnerability in the web management interface of Cisco Prime License Manager (PLM) Software could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of user input on the web management interface. An attacker could exploit this vulnerability by submitting a malicious request to an affected system. An exploit could allow the attacker to gain administrative-level privileges on the system. The attacker needs a valid username to exploit this vulnerability.
Mastodon before 3.3.2 and 3.4.x before 3.4.6 has incorrect access control because it does not compact incoming signed JSON-LD activities. (JSON-LD signing has been supported since version 1.6.0.)
A traffic classification vulnerability in Juniper Networks Junos OS on the SRX Series Services Gateways may allow an attacker to bypass Juniper Deep Packet Inspection (JDPI) rules and access unauthorized networks or resources, when 'no-syn-check' is enabled on the device. While JDPI correctly classifies out-of-state asymmetric TCP flows as the dynamic-application UNKNOWN, this classification is not provided to the policy module properly and hence traffic continues to use the pre-id-default-policy, which is more permissive, causing the firewall to allow traffic to be forwarded that should have been denied. This issue only occurs when 'set security flow tcp-session no-syn-check' is configured on the device. This issue affects Juniper Networks Junos OS on SRX Series: 18.4 versions prior to 18.4R2-S10, 18.4R3-S10; 19.1 versions prior to 19.1R3-S8; 19.2 versions prior to 19.2R1-S8, 19.2R3-S4; 19.3 versions prior to 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R2-S2, 20.4R3; 21.1 versions prior to 21.1R2-S2, 21.1R3; 21.2 versions prior to 21.2R2. This issue does not affect Juniper Networks Junos OS versions prior to 18.4R1.
Zulip is an open-source team collaboration tool with topic-based threading. Zulip Server version 2.0.0 and above are vulnerable to insufficient access control with multi-use invitations. A Zulip Server deployment which hosts multiple organizations is vulnerable to an attack where an invitation created in one organization (potentially as a role with elevated permissions) can be used to join any other organization. This bypasses any restrictions on required domains on users' email addresses, may be used to gain access to organizations which are only accessible by invitation, and may be used to gain access with elevated privileges. This issue has been patched in release 4.10. There are no known workarounds for this issue. ### Patches _Has the problem been patched? What versions should users upgrade to?_ ### Workarounds _Is there a way for users to fix or remediate the vulnerability without upgrading?_ ### References _Are there any links users can visit to find out more?_ ### For more information If you have any questions or comments about this advisory, you can discuss them on the [developer community Zulip server](https://zulip.com/developer-community/), or email the [Zulip security team](mailto:security@zulip.com).
An issue was discovered on Samsung mobile devices with O(8.x), P(9.0), and Q(10.0) software. The persona service allows attackers (who control an unprivileged SecureFolder process) to bypass admin restrictions in KnoxContainer. The Samsung ID is SVE-2020-18133 (August 2020).
Portainer 1.24.1 and earlier is affected by incorrect access control that may lead to remote arbitrary code execution. The restriction checks for bind mounts are applied only on the client-side and not the server-side, which can lead to spawning a container with bind mount. Once such a container is spawned, it can be leveraged to break out of the container leading to complete Docker host machine takeover.
White Shark System (WSS) 1.3.2 is vulnerable to unauthorized access via user_edit_password.php, remote attackers can modify the password of any user.
Incorrect Access Control in Lin-CMS-Flask v0.1.1 allows remote attackers to obtain sensitive information and/or gain privileges due to the application not invalidating a user's authentication token upon logout, which allows for replaying packets.
<p>An elevation of privilege vulnerability exists in the way Azure Functions validate access keys.</p> <p>An unauthenticated attacker who successfully exploited this vulnerability could invoke an HTTP Function without proper authorization.</p> <p>This security update addresses the vulnerability by correctly validating access keys used to access HTTP Functions.</p>
Condor before 7.0.4 does not properly handle wildcards in the ALLOW_WRITE, DENY_WRITE, HOSTALLOW_WRITE, or HOSTDENY_WRITE configuration variables in authorization policy lists, which might allow remote attackers to bypass intended access restrictions.
In CWP (aka Control Web Panel or CentOS Web Panel) before 0.9.8.1107, attackers can make a crafted request to api/?api=add_server&DHCP= to add an authorized_keys text file in the /resources/ folder.
Apache Solr versions 6.6.0 to 6.6.6, 7.0.0 to 7.7.3 and 8.0.0 to 8.6.2 prevents some features considered dangerous (which could be used for remote code execution) to be configured in a ConfigSet that's uploaded via API without authentication/authorization. The checks in place to prevent such features can be circumvented by using a combination of UPLOAD/CREATE actions.
The Login Security module 6.x-1.x before 6.x-1.3 and 7.x-1.x before 7.x-1.3 for Drupal allows attackers to bypass intended restrictions via a crafted username.
Wire is an open source secure messenger. In affected versions if the an attacker gets an old but valid access token they can take over an account by changing the email. This issue has been resolved in version 3.86 which uses a new endpoint which additionally requires an authentication cookie. See wire-ios-sync-engine and wire-ios-transport references. This is the root advisory that pulls the changes together.
In Unisys Stealth 3.4.x, 4.x and 5.x before 5.0.026, if certificate-based authorization is used without HTTPS, an endpoint could be authorized without a private key.
Teleport provides connectivity, authentication, access controls and audit for infrastructure. Community Edition versions before and including 17.5.1 are vulnerable to remote authentication bypass. At time of posting, there is no available open-source patch.
Incorrect Authorization vulnerability in Micro Focus Container Deployment Foundation component affects products: - Hybrid Cloud Management. Versions 2018.05 to 2019.11. - ArcSight Investigate. versions 2.4.0, 3.0.0 and 3.1.0. - ArcSight Transformation Hub. versions 3.0.0, 3.1.0, 3.2.0. - ArcSight Interset. version 6.0.0. - ArcSight ESM (when ArcSight Fusion 1.0 is installed). version 7.2.1. - Service Management Automation (SMA). versions 2018.05 to 2020.02 - Operation Bridge Suite (Containerized). Versions 2018.05 to 2020.02. - Network Operation Management. versions 2017.11 to 2019.11. - Data Center Automation Containerized. versions 2018.05 to 2019.11 - Identity Intelligence. versions 1.1.0 and 1.1.1. The vulnerability could be exploited to provide unauthorized access to the Container Deployment Foundation.
Authentication Bypass vulnerability in D-Link DIR-885L FW102b01 allows remote attackers to gain escalated privileges via phpcgi. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.
An issue was discovered in SMA Solar Technology products. A secondary authentication system is available for Installers called the Grid Guard system. This system uses predictable codes, and a single Grid Guard code can be used on any SMA inverter. Any such code, when combined with the installer account, allows changing very sensitive parameters. NOTE: the vendor reports that Grid Guard is not an authentication feature; it is only a tracing feature. Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected
BMC Server Automation before 8.9.01 patch 1 allows Process Spawner command execution because of authentication bypass.
Red Hat 3scale (aka RH-3scale) API Management Platform (AMP) before 2.0.0 would permit creation of an access token without a client secret. An attacker could use this flaw to circumvent authentication controls and gain access to restricted APIs. NOTE: some sources have a typo in which CVE-2017-7512 maps to an OpenVPN vulnerability. The proper CVE ID for that OpenVPN vulnerability is CVE-2017-7521. Specifically, CVE-2017-7521 is the correct CVE ID for TWO closely related findings in OpenVPN. Any source that lists BOTH CVE-2017-7512 and CVE-2017-7521 for OpenVPN should have listed ONLY CVE-2017-7521.
It was found that spacewalk-channel can be used by a non-admin user or disabled users to perform administrative tasks due to an incorrect authorization check in backend/server/rhnChannel.py.
An Access Control issue discovered in Extreme Networks Switch Engine (EXOS) before 32.5.1.5, also fixed in 22.7, 31.7.2 allows attackers to gain escalated privileges using crafted telnet commands via Redis server.
This improper access control vulnerability allows remote attackers to gain unauthorized access to the system. To fix these vulnerabilities, QNAP recommend updating Photo Station to their latest versions.
Canonical snapd before version 2.37.1 incorrectly performed socket owner validation, allowing an attacker to run arbitrary commands as root. This issue affects: Canonical snapd versions prior to 2.37.1.
SAP CommonCryptoLib does not perform necessary authentication checks, which may result in missing or wrong authorization checks for an authenticated user, resulting in escalation of privileges. Depending on the application and the level of privileges acquired, an attacker could abuse functionality restricted to a particular user group as well as read, modify or delete restricted data.
Veritas APTARE versions prior to 10.5 did not perform adequate authorization checks. This vulnerability could allow for remote code execution by an unauthenticated user.
Incorrect Authorization vulnerability in Artbees JupiterX Core allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects JupiterX Core: from n/a through 3.3.8.
A security vulnerability in MICS Admin Portal in Ivanti MobileIron Sentry versions 9.18.0 and below, which may allow an attacker to bypass authentication controls on the administrative interface due to an insufficiently restrictive Apache HTTPD configuration.
Authentication Bypass vulnerability in D-Link DIR-859 FW105b03 allows remote attackers to gain escalated privileges via via phpcgi_main. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.
Authentication Bypass vulnerability in D-Link DIR-895 FW102b07 allows remote attackers to gain escalated privileges via via function phpcgi_main in cgibin. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.
VMware Aria Operations for Logs contains an authentication bypass vulnerability. An unauthenticated, malicious actor can inject files into the operating system of an impacted appliance which can result in remote code execution.
Sealos is an open source cloud operating system distribution based on the Kubernetes kernel. In versions of Sealos prior to 4.2.1-rc4 an improper configuration of role based access control (RBAC) permissions resulted in an attacker being able to obtain cluster control permissions, which could control the entire cluster deployed with Sealos, as well as hundreds of pods and other resources within the cluster. This issue has been addressed in version 4.2.1-rc4. Users are advised to upgrade. There are no known workarounds for this vulnerability.
In JetBrains TeamCity before 2023.05 bypass of permission checks allowing to perform admin actions was possible
The Linux DVS server component of Mitel MiVoice Connect through 19.3 SP2 (22.24.1500.0) could allow an unauthenticated attacker with internal network access to execute arbitrary scripts due to improper access control.
Milesight NCR/camera version 71.8.0.6-r5 allows authentication bypass through an unspecified method.
Incorrect Authorization vulnerability in Apache Software Foundation Apache IoTDB.This issue affects the iotdb-web-workbench component on 0.13.3. iotdb-web-workbench is an optional component of IoTDB, providing a web console of the database. This problem is fixed from version 0.13.4 of iotdb-web-workbench onwards.
The iframe sandbox rules were not correctly applied to XSLT stylesheets, allowing an iframe to bypass restrictions such as executing scripts or navigating the top-level frame. This vulnerability affects Firefox < 94, Thunderbird < 91.3, and Firefox ESR < 91.3.
A vulnerability, which was classified as critical, has been found in withstars Books-Management-System 1.0. This issue affects some unknown processing of the file /admin/article/list of the component Background Interface. The manipulation leads to missing authorization. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
An issue in Zimbra Collaboration (ZCS) v.8.8.15 and v.9.0 allows a remote attacker to escalate privileges and obtain sensitive information via the password and 2FA parameters.
Wade Graphic Design FANTSY has a vulnerability of insufficient authorization check. An unauthenticated remote user can exploit this vulnerability by modifying URL parameters to gain administrator privileges to perform arbitrary system operation or disrupt service.
Incorrect authorization in OMICRON StationGuard 1.10 through 2.20 and StationScout 1.30 through 2.20 allows an attacker to bypass intended access restrictions.
A vulnerability was found in withstars Books-Management-System 1.0. It has been rated as critical. Affected by this issue is some unknown functionality of the file /allreaders.html of the component Background Interface. The manipulation leads to missing authorization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
Improper authentication vulnerability in T&D Corporation and ESPEC MIC CORP. data logger products allows a remote unauthenticated attacker to login to the product as a registered user. Affected products and versions are as follows: T&D Corporation data logger products (TR-71W/72W all firmware versions, RTR-5W all firmware versions, WDR-7 all firmware versions, WDR-3 all firmware versions, and WS-2 all firmware versions), and ESPEC MIC CORP. data logger products (RT-12N/RS-12N all firmware versions, RT-22BN all firmware versions, and TEU-12N all firmware versions).
Arcserve UDP through 9.0.6034 allows authentication bypass. The method getVersionInfo at WebServiceImpl/services/FlashServiceImpl leaks the AuthUUID token. This token can be used at /WebServiceImpl/services/VirtualStandbyServiceImpl to obtain a valid session. This session can be used to execute any task as administrator.
A client side rate limit issue discovered in Connectize AC21000 G6 641.139.1.1256 allows attackers to gain escalated privileges via brute force style attacks.
An authentication bypass vulnerability in the web client interface for the CL4NX printer before firmware version 1.13.3-u724_r2 provides remote unauthenticated attackers with access to execute commands intended only for valid/authenticated users, such as file uploads and configuration changes.