IBM QRadar Network Security 5.4.0 and 5.5.0 transmits sensitive or security-critical data in cleartext in a communication channel that can be obtained using man in the middle techniques. IBM X-Force ID: 17467.
IBM Security Guardium Insights 2.0.2 does not set the secure attribute on authorization tokens or session cookies. Attackers may be able to get the cookie values by sending a http:// link to a user or by planting this link in a site the user goes to. The cookie will be sent to the insecure link and the attacker can then obtain the cookie value by snooping the traffic. IBM X-Force ID: 184822.
IBM Security Identity Governance and Intelligence 5.2.6 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques.
IBM Verify Gateway (IVG) 1.0.0 and 1.0.1 transmits sensitive information in plain text which could be obtained by an attacker using man in the middle techniques. IBM X-Force ID: 179428.
IBM Security Identity Governance and Intelligence 5.2.4, 5.2.5, and 5.2.6 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 192429.
The issue was addressed with improved UI handling. This issue is fixed in iOS 13.3.1 and iPadOS 13.3.1, Safari 13.0.5. A local user may unknowingly send a password unencrypted over the network.
An issue was discovered in Arm Mbed TLS before 2.23.0. A remote attacker can recover plaintext because a certain Lucky 13 countermeasure doesn't properly consider the case of a hardware accelerator.
A vulnerability exists in curl <7.87.0 HSTS check that could be bypassed to trick it to keep using HTTP. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. However, the HSTS mechanism could be bypassed if the host name in the given URL first uses IDN characters that get replaced to ASCII counterparts as part of the IDN conversion. Like using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop (U+002E) `.`. Then in a subsequent request, it does not detect the HSTS state and makes a clear text transfer. Because it would store the info IDN encoded but look for it IDN decoded.
The server supports authentication methods in which credentials are sent in plaintext over unencrypted channels. If an attacker were to intercept traffic between a client and this server, the credentials would be exposed.
In Solstice Pod before 3.0.3, the web services allow users to connect to them over unencrypted channels via the Browser Look-in feature. An attacker suitably positioned to view a legitimate user's network traffic could record and monitor their interactions with the web services and obtain any information the user supplies, including Administrator passwords and screen keys.
The Taidii Diibear Android application 2.4.0 and all its derivatives allow attackers to view private chat messages and media files via logcat because of excessive logging.
Ecovacs Deebot T10 1.7.2 transmits Wi-Fi credentials in cleartext during the pairing process.
The API in the Push extension for MediaWiki through 1.35 used cleartext for ApiPush credentials, allowing for potential information disclosure.
An issue was discovered on V-SOL V1600D V2.03.69 and V2.03.57, V1600D4L V1.01.49, V1600D-MINI V1.01.48, V1600G1 V2.0.7 and V1.9.7, and V1600G2 V1.1.4 OLT devices. TELNET is offered by default but SSH is not always available. An attacker can intercept passwords sent in cleartext and conduct a man-in-the-middle attack on the management of the appliance.
An issue was discovered on CDATA 72408A, 9008A, 9016A, 92408A, 92416A, 9288, 97016, 97024P, 97028P, 97042P, 97084P, 97168P, FD1002S, FD1104, FD1104B, FD1104S, FD1104SN, FD1108S, FD1204S-R2, FD1204SN, FD1204SN-R2, FD1208S-R2, FD1216S-R1, FD1608GS, FD1608SN, FD1616GS, FD1616SN, and FD8000 devices. By default, the appliance can be managed remotely only with HTTP, telnet, and SNMP. It doesn't support SSL/TLS for HTTP or SSH. An attacker can intercept passwords sent in cleartext and conduct man-in-the-middle attacks on the management of the appliance.
In JetBrains Toolbox App before 2.6 unencrypted credential transmission during SSH authentication was possible
IBM Cognos Dashboards on Cloud Pak for Data 4.7.0 exposes sensitive information in environment variables which could aid in further attacks against the system. IBM X-Force ID: 260736.
The NPort IA5000A Series devices use Telnet as one of the network device management services. Telnet does not support the encryption of client-server communications, making it vulnerable to Man-in-the-Middle attacks.
Cleartext Transmission of Sensitive Information vulnerability in BASETech GE-131 BT-1837836 firmware 20180921 exists which could leak sensitive information transmitted between the mobile app and the camera device.
Cleartext transmission of sensitive information via Moxa Service in NPort IA5000A series serial devices. Successfully exploiting the vulnerability could enable attackers to read authentication data, device configuration, and other sensitive data transmitted over Moxa Service.
Quick Heal Total Security before version 19.0 transmits quarantine and sysinfo files via clear text.
Cleartext transmission of sensitive information vulnerability in DDNS in Synology DiskStation Manager (DSM) before 6.2.3-25426-2 allows man-in-the-middle attackers to eavesdrop authentication information of DNSExit via unspecified vectors.
The affected product transmits unencrypted sensitive information, which may allow an attacker to access this information on the NIO 50 (all versions).
The built-in WEB server for MOXA NPort IAW5000A-I/O firmware version 2.1 or lower stores and transmits the credentials of third-party services in cleartext.
Cleartext transmission of sensitive information in Agora Video SDK prior to 3.1 allows a remote attacker to obtain access to audio and video of any ongoing Agora video call through observation of cleartext network traffic.
A flaw was found in the Linux kernel in versions before 5.9-rc7. Traffic between two Geneve endpoints may be unencrypted when IPsec is configured to encrypt traffic for the specific UDP port used by the GENEVE tunnel allowing anyone between the two endpoints to read the traffic unencrypted. The main threat from this vulnerability is to data confidentiality.
The Network Attached Storage (NAS) Administration Web Page for Iomega NAS A300U transmits passwords in cleartext, which allows remote attackers to sniff the administrative password.
The affected Reolink P2P products do not sufficiently protect data transferred between the local device and Reolink servers. This can allow an attacker to access sensitive information, such as camera feeds.
IBM Cognos Analytics Mobile (iOS) 1.1.0 through 1.1.22 could allow malicious actors to obtain sensitive information due to the cleartext transmission of data.
An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. Sensitive information is sent to the web server in cleartext, which may allow an attacker to discover the credentials if they are able to observe traffic between the web browser and the server.
A CWE-319: Cleartext Transmission of Sensitive Information vulnerability exists in Modicon M580, Modicon M340, Modicon Premium , Modicon Quantum (all firmware versions), which could cause the disclosure of information when transferring applications to the controller using Modbus TCP protocol.
A CWE-319: Cleartext Transmission of Sensitive Information vulnerability exists in Modicon M580, Modicon M340, Modicon BMxCRA and 140CRA modules (all firmware versions), which could cause information disclosure when using the FTP protocol.
IBM Cognos Dashboards on Cloud Pak for Data 4.7.0 exposes sensitive information in container images which could lead to further attacks against the system. IBM X-Force ID: 260730.
The device uses an unencrypted, proprietary protocol for communication. Through this protocol, configuration data is transmitted and device authentication is performed. An attacker can thereby intercept the authentication hash and use it to log into the device using a pass-the-hash attack.
A cleartext transmission of sensitive information vulnerability is present in Hickory Smart Ethernet Bridge from Belwith Products, LLC. Captured data reveals that the Hickory Smart Ethernet Bridge device communicates over the network to an MQTT broker without using encryption. This exposed the default username and password used to authenticate to the MQTT broker. This issue affects Hickory Smart Ethernet Bridge, model number H077646. The firmware does not appear to contain versioning information.
Yarn before 1.17.3 is vulnerable to Missing Encryption of Sensitive Data due to HTTP URLs in lockfile causing unencrypted authentication data to be sent over the network.
IBM Security Guardium Data Encryption (GDE) 3.0.0.2 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 171826.
ASUS RT-AC66U B1 3.0.0.4.286_51665 was discovered to transmit sensitive information in cleartext.
IBM Sterling B2B Integrator 5.2.0.1 through 6.0.0.0 Standard Edition could allow highly sensitive information to be transmitted in plain text. An attacker could obtain this information using man in the middle techniques. IBM X-ForceID: 157008.
IBM UrbanCode Deploy (UCD) 7.0.5.2 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 171249.
ELOG 3.1.4-57bea22 and below is affected by an information disclosure vulnerability. A remote unauthenticated attacker can access the server's configuration file by sending an HTTP GET request. Amongst the configuration data, the attacker may gain access to valid admin usernames and, in older versions of ELOG, passwords.
A cleartext transmission vulnerability exists in the network communication functionality of WAGO e!Cockpit version 1.5.1.1. An attacker with access to network traffic can easily intercept, interpret, and manipulate data coming from, or destined for e!Cockpit. This includes passwords, configurations, and binaries being transferred to endpoints.
IBM QRadar 7.3.0 to 7.3.3 Patch 2 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-ForceID: 167810.
ELOG 3.1.4-57bea22 and below is affected by an information disclosure vulnerability. A remote unauthenticated attacker can recover a user's password hash by sending a crafted HTTP POST request.
IBM Financial Transaction Manager 3.0 does not set the secure attribute on authorization tokens or session cookies. Attackers may be able to get the cookie values by sending a http:// link to a user or by planting this link in a site the user goes to. The cookie will be sent to the insecure link and the attacker can then obtain the cookie value by snooping the traffic. IBM X-Force ID: 172880.
The user-introduction email in MFScripts YetiShare v3.5.2 through v4.5.4 may leak the (system-picked) password if this email is sent in cleartext. In other words, the user is not allowed to choose their own initial password.
An issue was discovered on Humax Wireless Voice Gateway HGB10R-2 20160817_1855 devices. Admin credentials are sent over cleartext HTTP.
In IXP EasyInstall 6.2.13723, there are cleartext credentials in network communication on TCP port 20050 when using the Administrator console remotely.
A vulnerability was found in Intergard SGS 8.7.0. It has been declared as problematic. This vulnerability affects unknown code of the component SQL Query Handler. The manipulation leads to cleartext transmission of sensitive information. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-234448. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
An issue was discovered on Humax Wireless Voice Gateway HGB10R-2 20160817_1855 devices. The attacker can discover admin credentials in the backup file, aka backupsettings.conf.