Insufficiently Protected Credentials vulnerability exists in EcoStruxure Control Expert (all versions prior to V15.0 SP1, including all versions of Unity Pro), EcoStruxure Process Expert (all versions, including all versions of EcoStruxure Hybrid DCS), and SCADAPack RemoteConnect for x70, all versions, that could cause a leak of SMTP credential used for mailbox authentication when an attacker can access a project file.

Sandboxie is a sandbox-based isolation software for 32-bit and 64-bit Windows NT-based operating systems. In versions 1.16.1 and below, a critical security vulnerability exists in password handling mechanisms. During encrypted sandbox creation, user passwords are transmitted via shared memory, exposing them to potential interception. The vulnerability is particularly severe during password modification operations, where both old and new passwords are passed as plaintext command-line arguments to the Imbox process without any encryption or obfuscation. This implementation flaw allows any process within the user session, including unprivileged processes, to retrieve these sensitive credentials by reading the command-line arguments, thereby bypassing standard privilege requirements and creating a significant security risk. This is fixed in version 1.16.2.

The PureVPN client before 6.1.0 for Windows stores Login Credentials (username and password) in cleartext. The location of such files is %PROGRAMDATA%\purevpn\config\login.conf. Additionally, all local users can read this file.

IBM Security Verify Bridge 1.0.5.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 196346.

A vulnerability in the storage method of the PON Controller configuration file could allow an authenticated, local attacker with low privileges to obtain the MongoDB credentials. This vulnerability is due to improper storage of the unencrypted database credentials on the device that is running Cisco IOS XR Software. An attacker could exploit this vulnerability by accessing the configuration files on an affected system. A successful exploit could allow the attacker to view MongoDB credentials.

IBM Security Guardium 11.2 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 195770.

A vulnerability in the web-based management interface of Cisco ATA 190 Series Multiplatform Analog Telephone Adapter firmware could allow an authenticated, local attacker with low privileges to view passwords on an affected device. This vulnerability is due to incorrect sanitization of HTML content from an affected device. A successful exploit could allow the attacker to view passwords that belong to other users.

A vulnerability has been found in CESNET theme-cesnet up to 1.x on ownCloud and classified as problematic. Affected by this vulnerability is an unknown functionality of the file cesnet/core/lostpassword/templates/resetpassword.php. The manipulation leads to insufficiently protected credentials. Attacking locally is a requirement. Upgrading to version 2.0.0 is able to address this issue. The identifier of the patch is 2b857f2233ce5083b4d5bc9bfc4152f933c3e4a6. It is recommended to upgrade the affected component. The identifier VDB-217633 was assigned to this vulnerability.

Envoy Passport for Android and Envoy Passport for iPhone could allow a local attacker to obtain sensitive information, caused by the storing of hardcoded OAuth Creds in plaintext. An attacker could exploit this vulnerability to obtain sensitive information.

In pam/gkr-pam-module.c in GNOME Keyring before 3.27.2, the user's password is kept in a session-child process spawned from the LightDM daemon. This can expose the credential in cleartext.

A vulnerability in the storage of proxy server credentials of Cisco Firepower Management Center (FMC) could allow an authenticated, local attacker to view credentials for a configured proxy server. The vulnerability is due to clear-text storage and weak permissions of related configuration files. An attacker could exploit this vulnerability by accessing the CLI of the affected software and viewing the contents of the affected files. A successful exploit could allow the attacker to view the credentials that are used to access the proxy server.

A vulnerability in the installer software of Cisco ThousandEyes Recorder could allow an unauthenticated, local attacker to access sensitive information that is contained in the ThousandEyes Recorder installer software. This vulnerability exists because sensitive information is included in the application installer. An attacker could exploit this vulnerability by downloading the installer and extracting its contents. A successful exploit could allow the attacker to access sensitive information that is included in the application installer.

Cleartext Storage of credentials in the iSmartAlarmData.xml configuration file in the iSmartAlarm application through 2.0.8 for Android allows an attacker to retrieve the username and password.

A vulnerability in the CLI command permissions of Cisco IOS and Cisco IOS XE Software could allow an authenticated, local attacker to retrieve the password for Common Industrial Protocol (CIP) and then remotely configure the device as an administrative user. This vulnerability exists because incorrect permissions are associated with the show cip security CLI command. An attacker could exploit this vulnerability by issuing the command to retrieve the password for CIP on an affected device. A successful exploit could allow the attacker to reconfigure the device.

In PACTware before 4.1 SP6 and 5.x before 5.0.5.31, passwords are stored in a recoverable format, and may be retrieved by any user with access to the PACTware workstation.

Unprotected Storage of Credentials vulnerability in McAfee Data Loss Prevention (DLP) for Mac prior to 11.5.2 allows local users to gain access to the ADRMS username and password via unprotected log files containing plain text

Unprotected Storage of Credentials vulnerability in McAfee Data Loss Prevention (DLP) for Mac prior to 11.5.2 allows local users to gain access to the RiskDB username and password via unprotected log files containing plain text credentials.

Local registry credentials were included directly in the CD4PE deployment definition, which could expose these credentials to users who should not have access to them. This is resolved in Continuous Delivery for Puppet Enterprise 4.0.1.

Under certain conditions SAP Business One (Backup service), versions 9.3, 10.0, allows an attacker with admin permissions to view SYSTEM user password in clear text, leading to Information Disclosure.

Dell EMC Repository Manager (DRM) version 3.2 contains a plain-text password storage vulnerability. Proxy server user password is stored in a plain text in a local database. A local authenticated malicious user with access to the local file system may use the exposed password to access the with privileges of the compromised user.

MikroTik WinBox 3.22 and below stores the user's cleartext password in the settings.cfg.viw configuration file when the Keep Password field is set and no Master Password is set. Keep Password is set by default and, by default Master Password is not set. An attacker with access to the configuration file can extract a username and password to gain access to the router.

IBM Security Guardium Insights 2.0.1 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 184747.

IBM Tivoli Key Lifecycle Manager 3.0, 3.0.1, and 4.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 184157.

IBM Cloud Pak System 2.3 could reveal credential information in the HTTP response to a local privileged user. IBM X-Force ID: 191288.

IBM Verify Gateway (IVG) 1.0.0 and 1.0.1 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 179009

The IBM QRadar Advisor 1.1 through 2.5.2 with Watson App for IBM QRadar SIEM does not adequately mask all passwords during input, which could be obtained by a physical attacker nearby. IBM X-Force ID: 179536.

"BigFix Platform is storing clear text credentials within the system's memory. An attacker who is able to gain administrative privileges can use a program to create a memory dump and extract the credentials. These credentials can be used to pivot further into the environment. The principle of least privilege should be applied to all BigFix deployments, limiting administrative access."

If a user saved passwords before Firefox 58 and then later set a master password, an unencrypted copy of these passwords is still accessible. This is because the older stored password file was not deleted when the data was copied to a new format starting in Firefox 58. The new master password is added only on the new file. This could allow the exposure of stored password data outside of user expectations. This vulnerability affects Firefox < 62, Firefox ESR < 60.2.1, and Thunderbird < 60.2.1.

An issue was discovered on Momentum Axel 720P 5.1.8 devices. The root password can be obtained in cleartext by issuing the command 'showKey' from the root CLI. This password may be the same on all devices

Storing password in recoverable format in safensec.com (SysWatch service) in SAFE'N'SEC SoftControl/SafenSoft SysWatch, SoftControl/SafenSoft TPSecure, and SoftControl/SafenSoft Enterprise Suite before 4.4.2 allows the local attacker to restore the SysWatch password from the settings database and modify program settings.

Unprotected Storage of Credentials vulnerability in BASETech GE-131 BT-1837836 firmware 20180921 allows local users to gain access to the video streaming username and password via SQLite files containing plain text credentials.

IBM Security Guardium EcoSystem 10.5 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 141223.

A vulnerability has been identified in Opcenter Execution Core (V8.2), Opcenter Execution Core (V8.3). The application contains an information leakage vulnerability in the handling of web client sessions. A local attacker who has access to the Web Client Session Storage could disclose the passwords of currently logged-in users.

A CWE-522: Insufficiently Protected Credentials vulnerability exists in EcoStruxure Geo SCADA Expert 2019 (Original release and Monthly Updates to September 2020, from 81.7268.1 to 81.7578.1) and EcoStruxure Geo SCADA Expert 2020 (Original release and Monthly Updates to September 2020, from 83.7551.1 to 83.7578.1), that could cause exposure of credentials to server-side users when web users are logged in to Virtual ViewX.

Plaintext Storage of Passwords in the administrative console in Dialogic PowerMedia XMS before 3.5 SU2 allows local users to access the web application's user passwords in cleartext by reading /var/www/xms/xmsdb/default.db.

ovirt-engine up to version 4.2.3 is vulnerable to an unfiltered password when choosing manual db provisioning. When engine-setup was run and one chooses to provision the database manually or connect to a remote database, the password input was logged in cleartext during the verification step. Sharing the provisioning log might inadvertently leak database passwords.

An insufficiently protected credentials vulnerability exists in Jenkins Artifactory Plugin 2.16.1 and earlier in ArtifactoryBuilder.java, CredentialsConfig.java that allows attackers with local file system access to obtain old credentials configured for the plugin before it integrated with Credentials Plugin.

An insufficiently protected credentials vulnerability exists in Jenkins Crowd 2 Integration Plugin 2.0.0 and earlier in CrowdSecurityRealm.java, CrowdConfigurationService.java that allows attackers with local file system access to obtain the credentials used to connect to Crowd 2.

The IBM Security Access Manager appliance includes configuration files that contain obfuscated plaintext-passwords which authenticated users can access.

Rockwell Automation ISaGRAF Runtime Versions 4.x and 5.x stores the password in plaintext in a file that is in the same directory as the executable file. ISaGRAF Runtime reads the file and saves the data in a variable without any additional modification. A local, unauthenticated attacker could compromise the user passwords, resulting in information disclosure.

A vulnerability in the web portal authentication process of Cisco Prime Collaboration Provisioning could allow an unauthenticated, local attacker to view sensitive data. The vulnerability is due to improper logging of authentication data. An attacker could exploit this vulnerability by monitoring a specific World-Readable file for this authentication data (Cleartext Passwords). An exploit could allow the attacker to gain authentication information for other users. Cisco Bug IDs: CSCvd86602.

IBM Security Guardium Big Data Intelligence (SonarG) 3.1 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 137778.

A vulnerability in the Virtual Network Function Manager's (VNFM) logging function of Cisco Ultra Services Platform could allow an authenticated, local attacker to view sensitive data (cleartext credentials) on an affected system. More Information: CSCvd29355. Known Affected Releases: 21.0.v0.65839.

Previous releases of the Puppet cisco_ios module output SSH session debug information including login credentials to a world readable file on every run. These issues have been resolved in the 0.4.0 release.

Previous releases of the Puppet device_manager module creates configuration files containing credentials that are world readable. This issue has been resolved as of device_manager 2.7.0.

Dell EMC Secure Remote Services, versions prior to 3.32.00.08, contains a Plaintext Password Storage vulnerability. Database credentials are stored in plaintext in a configuration file. An authenticated malicious user with access to the configuration file may obtain the exposed password to gain access to the application database.

An information disclosure vulnerability exists in SAP GUI for Windows - versions < 7.60 PL13, 7.70 PL4, which allows an attacker with sufficient privileges on the local client-side PC to obtain an equivalent of the user’s password. With this highly sensitive data leaked, the attacker would be able to logon to the backend system the SAP GUI for Windows was connected to and launch further attacks depending on the authorizations of the user.

Synametrics SynaMan 4.0 build 1488 uses cleartext password storage for SMTP credentials.

An insufficiently protected credentials vulnerability exists in Jenkins SonarQube Scanner Plugin 2.8 and earlier in SonarInstallation.java that allows attackers with local file system access to obtain the credentials used to connect to SonarQube.

An information disclosure vulnerability exists in Schneider Electric's IGSS Mobile application version 3.01 and prior. Passwords are stored in clear text in the configuration which can result in exposure of sensitive information.