Tabs Mail Carrier 2.5.1 contains a buffer overflow vulnerability in the MAIL FROM SMTP command that allows remote attackers to execute arbitrary code by sending a crafted MAIL FROM parameter. Attackers can connect to the SMTP service on port 25 and send a malicious MAIL FROM command with an oversized buffer to overwrite the EIP register and execute a bind shell payload.

Stack-based Buffer Overflow vulnerability in Shenzhen Tenda Technology Co Tenda AC6V2 (setDoubleL2tpConfig->guest_ip_check(overflow arg: mask) modules) allows Overflow Buffers.This issue affects Tenda AC6V2: through 15.03.06.50

Vigor165/166 4.2.7 and earlier; Vigor2620/LTE200 3.9.8.9 and earlier; Vigor2860/2925 3.9.8 and earlier; Vigor2862/2926 3.9.9.5 and earlier; Vigor2133/2762/2832 3.9.9 and earlier; Vigor2135/2765/2766 4.4.5. and earlier; Vigor2865/2866/2927 4.4.5.3 and earlier; Vigor2962 4.3.2.8 and earlier; Vigor3912 4.3.6.1 and earlier; Vigor3910 4.4.3.1 and earlier a stack-based buffer overflow vulnerability has been identified in the URL parsing functionality of the TR069 STUN server. This flaw occurs due to insufficient bounds checking on the amount of URL parameters, allowing an attacker to exploit the overflow by sending a maliciously crafted request. Consequently, a remote attacker can execute arbitrary code with elevated privileges.

Stack-based Buffer Overflow vulnerability in Shenzhen Tenda Technology Co Tenda AC6V2 (fromAdvSetLanip(overflow arg:lanMask) modules) allows Overflow Buffers.This issue affects Tenda AC6V2: through 15.03.06.50

Stack-based Buffer Overflow vulnerability in Shenzhen Tenda Technology Co Tenda AC6V2 (setDoublePppoeConfig->guest_ip_check(overflow arg: mask) modules) allows Overflow Buffers.This issue affects Tenda AC6V2: through 15.03.06.50

Stack-based Buffer Overflow vulnerability in Shenzhen Tenda Technology Co Tenda AC6V2 (fromWizardHandle modules) allows Overflow Buffers.This issue affects Tenda AC6V2: through 15.03.06.50.

There are buffer overflow vulnerabilities in the underlying CLI service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

There are buffer overflow vulnerabilities in the underlying CLI service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

Stack-based buffer overflow vulnerability exists in GUARDIANWALL MailSuite and GUARDIANWALL Mail Security Cloud (SaaS version). If a remote attacker sends a specially crafted request to the product's web service, arbitrary code may be executed when the product is configured to run pop3wallpasswd with grdnwww user privilege.

A certain sequence of valid BGP or IPv6 BFD packets may trigger a stack based buffer overflow in the Junos OS Packet Forwarding Engine manager (FXPC) process on QFX5000 series, EX4300, EX4600 devices. This issue can result in a crash of the fxpc daemon or may potentially lead to remote code execution. Affected releases are Juniper Networks Junos OS on QFX 5000 series, EX4300, EX4600 are: 14.1X53; 15.1X53 versions prior to 15.1X53-D235; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R3; 17.3 versions prior to 17.3R3-S2, 17.3R4; 17.4 versions prior to 17.4R2-S1, 17.4R3; 18.1 versions prior to 18.1R3-S1, 18.1R4; 18.2 versions prior to 18.2R2; 18.2X75 versions prior to 18.2X75-D30; 18.3 versions prior to 18.3R2.

Multiple vulnerabilities in the web-based management interface of certain Cisco IP Phones could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of certain Cisco IP Phones could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

Stack-based buffer overflow vulnerability in Circutor SGE-PLC1000/SGE-PLC50 v9.0.2. In the 'SetUserPassword()' function, the 'newPassword' parameter is directly embedded in a shell command string using 'sprintf()' without any sanitisation or validation, and then executed using 'system()'. This allows an attacker to inject arbitrary shell commands that will be executed with the same privileges as the application.

Eaton 9000X DriveA versions 2.0.29 and prior has a stack-based buffer overflow vulnerability, which may allow remote code execution.

Buffer overflow in IPP sides attribute process of Office / Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *:Satera LBP660C Series/LBP620C Series/MF740C Series/MF640C Series firmware Ver.11.04 and earlier sold in Japan. Color imageCLASS LBP660C Series/LBP 620C Series/X LBP1127C/MF740C Series/MF640C Series/X MF1127C firmware Ver.11.04 and earlier sold in US. i-SENSYS LBP660C Series/LBP620C Series/MF740C Series/MF640C Series, C1127P, C1127iF, C1127i firmware Ver.11.04 and earlier sold in Europe.

A vulnerability was found in D-Link DCS-935L up to 1.13.01. The impacted element is the function sub_402280 of the file /HNAP1/. The manipulation of the argument HNAP_AUTH/SOAPAction results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

Buffer overflow in mDNS NSEC record registering process of Office / Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *:Satera LBP660C Series/LBP620C Series/MF740C Series/MF640C Series firmware Ver.11.04 and earlier sold in Japan. Color imageCLASS LBP660C Series/LBP 620C Series/X LBP1127C/MF740C Series/MF640C Series/X MF1127C firmware Ver.11.04 and earlier sold in US. i-SENSYS LBP660C Series/LBP620C Series/MF740C Series/MF640C Series, C1127P, C1127iF, C1127i firmware Ver.11.04 and earlier sold in Europe.

Buffer overflow in IPP number-up attribute process of Office / Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *:Satera LBP660C Series/LBP620C Series/MF740C Series/MF640C Series firmware Ver.11.04 and earlier sold in Japan. Color imageCLASS LBP660C Series/LBP 620C Series/X LBP1127C/MF740C Series/MF640C Series/X MF1127C firmware Ver.11.04 and earlier sold in US. i-SENSYS LBP660C Series/LBP620C Series/MF740C Series/MF640C Series, C1127P, C1127iF, C1127i firmware Ver.11.04 and earlier sold in Europe.

In Advantech WebAccess versions V8.2_20170817 and prior, WebAccess versions V8.3.0 and prior, WebAccess Dashboard versions V.2.0.15 and prior, WebAccess Scada Node versions prior to 8.3.1, and WebAccess/NMS 2.0.3 and prior, several stack-based buffer overflow vulnerabilities have been identified, which may allow an attacker to execute arbitrary code.

Buffer overflow in the Address Book of Mobile Device function of Office / Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *:Satera LBP660C Series/LBP620C Series/MF740C Series/MF640C Series firmware Ver.11.04 and earlier sold in Japan. Color imageCLASS LBP660C Series/LBP 620C Series/X LBP1127C/MF740C Series/MF640C Series/X MF1127C firmware Ver.11.04 and earlier sold in US. i-SENSYS LBP660C Series/LBP620C Series/MF740C Series/MF640C Series, C1127P, C1127iF, C1127i firmware Ver.11.04 and earlier sold in Europe.

When receiving calls using WhatsApp for Android, a missing size check when parsing a sender-provided packet allowed for a stack-based overflow. This issue affects WhatsApp for Android prior to 2.18.248 and WhatsApp Business for Android prior to 2.18.132.

HDF5 through 1.14.3 contains a stack buffer overflow in H5R__decode_heap, resulting in the corruption of the instruction pointer and causing denial of service or potential code execution.

A Stack-based Buffer Overflow issue was discovered in GE D60 Line Distance Relay devices running firmware Version 7.11 and prior. Multiple stack-based buffer overflow vulnerabilities have been identified, which may allow remote code execution.

A Stack-based Buffer Overflow issue was discovered in Fuji Electric V-Server VPR 4.0.1.0 and prior. The stack-based buffer overflow vulnerability has been identified, which may allow remote code execution.

A vulnerability, which was classified as critical, was found in Tenda AC15 15.03.05.18/15.03.20_multi. Affected is the function formSetFirewallCfg of the file /goform/SetFirewallCfg. The manipulation of the argument firewallEn leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-257664. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda AC15 15.03.05.18 and classified as critical. Affected by this issue is the function saveParentControlInfo of the file /goform/saveParentControlInfo. The manipulation of the argument urls leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-257774 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

OpenWrt Project is a Linux operating system targeting embedded devices. In versions prior to 24.10.6 and 25.12.1, the mdns daemon has a Stack-based Buffer Overflow vulnerability in the parse_question function. The issue is triggered by PTR queries for reverse DNS domains (.in-addr.arpa and .ip6.arpa). DNS packets received on UDP port 5353 are expanded by dn_expand into an 8096-byte global buffer (name_buffer), which is then copied via an unbounded strcpy into a fixed 256-byte stack buffer when handling TYPE_PTR queries. The overflow is possible because dn_expand converts non-printable ASCII bytes (e.g., 0x01) into multi-character octal representations (e.g., \001), significantly inflating the expanded name beyond the stack buffer's capacity. A crafted DNS packet can exploit this expansion behavior to overflow the stack buffer, making the vulnerability reachable through normal multicast DNS packet processing. This issue has been fixed in versions 24.10.6 and 25.12.1.

Belkin Bulldog Plus version 4.0.2 build 1219 contains a stack-based buffer overflow vulnerability in its web service authentication handler. When a specially crafted HTTP request is sent with an oversized Authorization header, the application fails to properly validate the input length before copying it into a fixed-size buffer, resulting in memory corruption and potential remote code execution. Exploitation requires network access and does not require prior authentication.

Talkative IRC v0.4.4.16 is vulnerable to a stack-based buffer overflow when processing specially crafted response strings sent to a connected client. An attacker can exploit this flaw by sending an overly long message that overflows a fixed-length buffer, potentially leading to arbitrary code execution in the context of the vulnerable process. This vulnerability is exploitable remotely and does not require authentication.

A stack-based buffer overflow exists in the UtilConfigHome.csp endpoint of InterSystems Caché 2009.1. The vulnerability is triggered by sending a specially crafted HTTP GET request containing an oversized argument to the .csp handler. Due to insufficient bounds checking, the input overflows a stack buffer, allowing an attacker to overwrite control structures and execute arbitrary code. It is unknown if this vulnerability was patched and an affected version range remains undefined.

When receiving calls using WhatsApp for iOS, a missing size check when parsing a sender-provided packet allowed for a stack-based overflow. This issue affects WhatsApp for iOS prior to v2.18.90.24 and WhatsApp Business for iOS prior to v2.18.90.24.

OpenWrt Project is a Linux operating system targeting embedded devices. In versions prior to 24.10.6 and 25.12.1, the mdns daemon has a Stack-based Buffer Overflow vulnerability in the match_ipv6_addresses function, triggered when processing PTR queries for IPv6 reverse DNS domains (.ip6.arpa) received via multicast DNS on UDP port 5353. During processing, the domain name from name_buffer is copied via strcpy into a fixed 256-byte stack buffer, and then the reverse IPv6 request is extracted into a buffer of only 46 bytes (INET6_ADDRSTRLEN). Because the length of the data is never validated before this extraction, an attacker can supply input larger than 46 bytes, causing an out-of-bounds write. This allows a specially crafted DNS query to overflow the stack buffer in match_ipv6_addresses, potentially enabling remote code execution. This issue has been fixed in versions 24.10.6 and 25.12.1.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a stack buffer overflow occurs when processing the an attribute in msl.c. A long value overflows a fixed-size stack buffer, leading to memory corruption. Versions 7.1.2-15 and 6.9.13-40 contain a patch.

FiberHome AN5506-04-FA firmware versions up to and including RP2631 and HG6245D prior to RP2602 contain a stack-based buffer overflow, as the HTTP service ('webs') fails to enforce maximum lengths for Cookie header values. When a cookie longer than 511 bytes is processed, a stack buffer is overrun, leading to a crash or potential control of execution flow.

A vulnerability was found in Tenda AC15 15.03.20_multi and classified as critical. Affected by this issue is the function formWifiWpsStart of the file /goform/WifiWpsStart. The manipulation of the argument index leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-257666 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

D-Link Go-RT-AC750 GORTAC750_A1_FW_v101b03 contains a stack-based buffer overflow via the function hnap_main. An attacker can send a POST request to trigger the vulnerablilify.

An issue was discovered in Fatek Automation PLC Ethernet Module. The affected Ether_cfg software configuration tool runs on the following Fatek PLCs: CBEH versions prior to V3.6 Build 170215, CBE versions prior to V3.6 Build 170215, CM55E versions prior to V3.6 Build 170215, and CM25E versions prior to V3.6 Build 170215. A stack-based buffer overflow vulnerability has been identified, which may allow remote code execution or crash the affected device.

Stack-based buffer overflow in Windows DHCP Client allows an unauthorized attacker to execute code over a network.

In SunGrow WiNet-SV200.001.00.P027 and earlier versions, when copying the timestamp read from an MQTT message, the underlying code does not check the bounds of the buffer that is used to store the message. This may lead to a stack-based buffer overflow.

Insufficient validation of input parameters when changing configuration on Tbase server in B&R APROL versions < R 4.2-07 could result in buffer overflow. This may lead to Denial-of-Service conditions or execution of arbitrary code.

Stack overflow in PJSUA API when calling pjsua_playlist_create. An attacker-controlled 'file_names' argument may cause a buffer overflow since it is copied to a fixed-size stack buffer without any size validation.

Due to improper RFC protocol validation in the SAP Kernel used by the Application Server ABAP of SAP NetWeaver and ABAP Platform, an unauthenticated attacker can send a crafted RFC request that exploits logical errors in memory management, leading to memory corruption. This could lead to a high impact on the confidentiality, integrity, and availability of the application.

SunGrow WiNet-SV200.001.00.P027 and earlier versions is vulnerable to stack-based buffer overflow when parsing MQTT messages, due to missing MQTT topic bounds checks.

Stack overflow in PJSUA API when calling pjsua_recorder_create. An attacker-controlled 'filename' argument may cause a buffer overflow since it is copied to a fixed-size stack buffer without any size validation.

HMS Networks Ewon Flexy with firmware before 15.0s4, Cosy+ with firmware 22.xx before 22.1s6, and Cosy+ with firmware 23.xx before 23.0s3 have a stack buffer overflow that leads to a Denial of Service, which can also be exploited to achieve Unauthenticated Remote Code Execution.

A stack buffer overflow occurs in net/at/src/at_server.c in RT-Thread through 5.0.2.

Dell PowerProtect Data Domain with Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.6, LTS2025 release version 8.3.1.0 through 8.3.1.10, LTS2024 release versions 7.13.1.0 through 7.13.1.60, contain a stack-based Buffer Overflow vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution.

Stack-based Buffer Overflow vulnerability in SimTech Systems, Inc. ThinkWise allows Remote Code Inclusion.This issue affects ThinkWise: from 7 through 23.