Splunk Enterprise peers in Splunk Enterprise versions before 9.0 and Splunk Cloud Platform versions before 8.2.2203 did not validate the TLS certificates during Splunk-to-Splunk communications by default. Splunk peer communications configured properly with valid certificates were not vulnerable. However, an attacker with administrator credentials could add a peer without a valid certificate and connections from misconfigured nodes without valid certificates did not fail by default. For Splunk Enterprise, update to Splunk Enterprise version 9.0 and Configure TLS host name validation for Splunk-to-Splunk communications (https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/EnableTLSCertHostnameValidation) to enable the remediation.

In Splunk Enterprise and Universal Forwarder versions before 9.0, the Splunk command-line interface (CLI) did not validate TLS certificates while connecting to a remote Splunk platform instance by default. After updating to version 9.0, see Configure TLS host name validation for the Splunk CLI https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/EnableTLSCertHostnameValidation#Configure_TLS_host_name_validation_for_the_Splunk_CLI to enable the remediation. The vulnerability does not affect the Splunk Cloud Platform. At the time of publishing, we have no evidence of exploitation of this vulnerability by external parties. The issue requires conditions beyond the control of a potential bad actor such as a machine-in-the-middle attack. Hence, Splunk rates the complexity of the attack as High.

curl 7.75.0 through 7.76.1 suffers from a use-after-free vulnerability resulting in already freed memory being used when a TLS 1.3 session ticket arrives over a connection. A malicious server can use this in rare unfortunate circumstances to potentially reach remote code execution in the client. When libcurl at run-time sets up support for TLS 1.3 session tickets on a connection using OpenSSL, it stores pointers to the transfer in-memory object for later retrieval when a session ticket arrives. If the connection is used by multiple transfers (like with a reused HTTP/1.1 connection or multiplexed HTTP/2 connection) that first transfer object might be freed before the new session is established on that connection and then the function will access a memory buffer that might be freed. When using that memory, libcurl might even call a function pointer in the object, making it possible for a remote code execution if the server could somehow manage to get crafted memory content into the correct place in memory.

Use after free in Blink XSLT in Google Chrome prior to 91.0.4472.164 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page.

A potential vulnerability in Splunk Enterprise's implementation of DUO MFA allows for bypassing the MFA verification in Splunk Enterprise versions before 8.1.6. The potential vulnerability impacts Splunk Enterprise instances configured to use DUO MFA and does not impact or affect a DUO product or service.

The httplib and urllib Python libraries that Splunk shipped with Splunk Enterprise did not validate certificates using the certificate authority (CA) certificate stores by default in Splunk Enterprise versions before 9.0 and Splunk Cloud Platform versions before 8.2.2203. Python 3 client libraries now verify server certificates by default and use the appropriate CA certificate stores for each library. Apps and add-ons that include their own HTTP libraries are not affected. For Splunk Enterprise, update to Splunk Enterprise version 9.0 and Configure TLS host name validation for Splunk-to-Splunk communications (https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/EnableTLSCertHostnameValidation) to enable the remediation.

Splunk Enterprise peers in Splunk Enterprise versions before 9.0 and Splunk Cloud Platform versions before 8.2.2203 did not validate the TLS certificates during Splunk-to-Splunk communications by default. Splunk peer communications configured properly with valid certificates were not vulnerable. However, an attacker with administrator credentials could add a peer without a valid certificate and connections from misconfigured nodes without valid certificates did not fail by default. For Splunk Enterprise, update to Splunk Enterprise version 9.0 and Configure TLS host name validation for Splunk-to-Splunk communications (https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/EnableTLSCertHostnameValidation) to enable the remediation.

When using Ingest Actions to configure a destination that resides on Amazon Simple Storage Service (S3) in Splunk Web, TLS certificate validation is not correctly performed and tested for the destination. The vulnerability only affects connections between Splunk Enterprise and an Ingest Actions Destination through Splunk Web and only applies to environments that have configured TLS certificate validation. It does not apply to Destinations configured directly in the outputs.conf configuration file. The vulnerability affects Splunk Enterprise version 9.0.0 and does not affect versions below 9.0.0, including the 8.1.x and 8.2.x versions.

In Splunk Add-on Builder (AoB) versions below 4.1.2 and the Splunk CloudConnect SDK versions below 3.1.3, requests to third-party APIs through the REST API Modular Input incorrectly revert to using HTTP to connect after a failure to connect over HTTPS occurs.

libcurl-using applications can ask for a specific client certificate to be used in a transfer. This is done with the `CURLOPT_SSLCERT` option (`--cert` with the command line tool).When libcurl is built to use the macOS native TLS library Secure Transport, an application can ask for the client certificate by name or with a file name - using the same option. If the name exists as a file, it will be used instead of by name.If the appliction runs with a current working directory that is writable by other users (like `/tmp`), a malicious user can create a file name with the same name as the app wants to use by name, and thereby trick the application to use the file based cert instead of the one referred to by name making libcurl send the wrong client certificate in the TLS connection handshake.

curl 7.41.0 through 7.73.0 is vulnerable to an improper check for certificate revocation due to insufficient verification of the OCSP response.

libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily.

A missing verification of the TLS host in Nextcloud Mail 1.1.3 allowed a man in the middle attack.

An issue was discovered in Couchbase Sync Gateway 3.x before 3.0.2. Admin credentials are not verified when using X.509 client-certificate authentication from Sync Gateway to Couchbase Server. When Sync Gateway is configured to authenticate with Couchbase Server using X.509 client certificates, the admin credentials provided to the Admin REST API are ignored, resulting in privilege escalation for unauthenticated users. The Public REST API is not impacted by this issue. A workaround is to replace X.509 certificate based authentication with Username and Password authentication inside the bootstrap configuration.

VOBOT CLOCK before 0.99.30 devices do not verify X.509 certificates from SSL servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information, and consequently execute arbitrary code, via a crafted certificate, as demonstrated by leveraging a hardcoded --no-check-certificate Wget option.

A spoofing vulnerability exists when the Azure IoT Device Provisioning AMQP Transport library improperly validates certificates over the AMQP protocol, aka "Azure IoT SDK Spoofing Vulnerability." This affects C# SDK, C SDK, Java SDK.

A man-in-the-middle vulnerability related to vCenter access was found in Rubrik CDM 3.x and 4.x before 4.0.4-p2. This vulnerability might expose Rubrik user credentials configured to access vCenter as Rubrik clusters did not verify TLS certificates presented by vCenter.

An unvalidated software update vulnerability in Trend Micro Email Encryption Gateway 5.5 could allow a man-in-the-middle attacker to tamper with an update file and inject their own.

Dell EMC Unisphere for PowerMax versions prior to 9.1.0.17, Dell EMC Unisphere for PowerMax Virtual Appliance versions prior to 9.1.0.17, and PowerMax OS Release 5978 contain an improper certificate validation vulnerability. An unauthenticated remote attacker may potentially exploit this vulnerability to carry out a man-in-the-middle attack by supplying a crafted certificate and intercepting the victim's traffic to view or modify a victim's data in transit.

The (1) CertGetCertificateChain, (2) CertVerifyCertificateChainPolicy, and (3) WinVerifyTrust APIs within the CryptoAPI for Microsoft products including Microsoft Windows 98 through XP, Office for Mac, Internet Explorer for Mac, and Outlook Express for Mac, do not properly verify the Basic Constraints of intermediate CA-signed X.509 certificates, which allows remote attackers to spoof the certificates of trusted sites via a man-in-the-middle attack for SSL sessions, as originally reported for Internet Explorer and IIS.

An information-disclosure issue was discovered in Postman through 6.3.0. It validates a server's X.509 certificate and presents an error if the certificate is not valid. Unfortunately, the associated HTTPS request data is sent anyway. Only the response is not displayed. Thus, all contained information of the HTTPS request is disclosed to a man-in-the-middle attacker (for example, user credentials).

Traefik is an HTTP reverse proxy and load balancer. Prior to version 2.6.1, Traefik skips the router transport layer security (TLS) configuration when the host header is a fully qualified domain name (FQDN). For a request, the TLS configuration choice can be different than the router choice, which implies the use of a wrong TLS configuration. When sending a request using FQDN handled by a router configured with a dedicated TLS configuration, the TLS configuration falls back to the default configuration that might not correspond to the configured one. If the CNAME flattening is enabled, the selected TLS configuration is the SNI one and the routing uses the CNAME value, so this can skip the expected TLS configuration. Version 2.6.1 contains a patch for this issue. As a workaround, one may add the FDQN to the host rule. However, there is no workaround if the CNAME flattening is enabled.

An issue was discovered in Yelp OSXCollector. A maliciously crafted Universal/fat binary can evade third-party code signing checks. By not completing full inspection of the Universal/fat binary, the user of the third-party tool will believe that the code is signed by Apple, but the malicious unsigned code will execute.

brianleroux tiny-json-http version all versions since commit 9b8e74a232bba4701844e07bcba794173b0238a8 (Oct 29 2016) contains a Missing SSL certificate validation vulnerability in The libraries core functionality is affected. that can result in Exposes the user to man-in-the-middle attacks.

A man in the middle vulnerability exists in Jenkins vSphere Plugin 2.16 and older in VSphere.java that disables SSL/TLS certificate validation by default.

Dell PowerScale OneFS, 8.2.x-9.3.x, contains a Improper Certificate Validation. A unauthenticated remote attacker could potentially exploit this vulnerability, leading to a man-in-the-middle capture of administrative credentials.

An issue was discovered in PrimeKey EJBCA 6.x and 7.x before 7.4.1. When using a client certificate to enroll over the EST protocol, no revocation check is performed on that certificate. This vulnerability can only affect a system that has EST configured, uses client certificates to authenticate enrollment, and has had such a certificate revoked. This certificate needs to belong to a role that is authorized to enroll new end entities. (To completely mitigate this problem prior to upgrade, remove any revoked client certificates from their respective roles.)

Envoy is an open source edge and service proxy, designed for cloud-native applications. Envoy's tls allows re-use when some cert validation settings have changed from their default configuration. The only workaround for this issue is to ensure that default tls settings are used. Users are advised to upgrade.

The (1) update and (2) package-installation features in MODX Revolution 2.5.4-pl and earlier do not verify X.509 certificates from SSL servers, which allows man-in-the-middle attackers to spoof servers and trigger the execution of arbitrary code via a crafted certificate.

Pandora iOS app prior to version 8.3.2 fails to properly validate SSL certificates provided by HTTPS connections, which may enable an attacker to conduct man-in-the-middle (MITM) attacks.

It was found that jenkins-ssh-slaves-plugin before version 1.15 did not perform host key verification, thereby enabling Man-in-the-Middle attacks.

Hammer CLI, a CLI utility for Foreman, before version 0.10.0, did not explicitly set the verify_ssl flag for apipie-bindings that disable it by default. As a result the server certificates are not checked and connections are prone to man-in-the-middle attacks.

It was found that the Active Directory Plugin for Jenkins up to and including version 2.2 did not verify certificates of the Active Directory server, thereby enabling Man-in-the-Middle attacks.

An exploitable free of a stack pointer vulnerability exists in the x509 certificate parsing code of ARM mbed TLS before 1.3.19, 2.x before 2.1.7, and 2.4.x before 2.4.2. A specially crafted x509 certificate, when parsed by mbed TLS library, can cause an invalid free of a stack pointer leading to a potential remote code execution. In order to exploit this vulnerability, an attacker can act as either a client or a server on a network to deliver malicious x509 certificates to vulnerable applications.

An exploitable vulnerability exists in the filtering functionality of Circle with Disney. SSL certificates for specific domain names can cause the Bluecoat library to accept a different certificate than intended. An attacker can host an HTTPS server with this certificate to trigger this vulnerability.

When libvirtd is configured by OSP director (tripleo-heat-templates) to use the TLS transport it defaults to the same certificate authority as all non-libvirtd services. As no additional authentication is configured this allows these services to connect to libvirtd (which is equivalent to root access). If a vulnerability exists in another service it could, combined with this flaw, be exploited to escalate privileges to gain control over compute nodes.

Akeo Consulting Rufus prior to version 2.17.1187 does not adequately validate the integrity of updates downloaded over HTTP, allowing an attacker to easily convince a user to execute arbitrary code

Improper certificate validation vulnerability in OpenVPN client in Synology DiskStation Manager (DSM) before 6.2.3-25426-2 allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate.

Improper certificate validation vulnerability in OpenVPN client in Synology Router Manager (SRM) before 1.2.4-8081 allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate.

libvirt version 2.3.0 and later is vulnerable to a bad default configuration of "verify-peer=no" passed to QEMU by libvirt resulting in a failure to validate SSL/TLS certificates by default.

The Scalyr Agent before 2.1.10 has Missing SSL Certificate Validation because, in some circumstances, the openssl binary is called without the -verify_hostname option.

A specially crafted x509 certificate can cause a single out of bounds byte overwrite in wolfSSL through 3.10.2 resulting in potential certificate validation vulnerabilities, denial of service and possible remote code execution. In order to trigger this vulnerability, the attacker needs to supply a malicious x509 certificate to either a server or a client application using this library.

The Scalyr Agent before 2.1.10 has Missing SSL Certificate Validation because, in some circumstances, native Python code is used that lacks a comparison of the hostname to commonName and subjectAltName.

The verify_certificate function in lib/vtls/schannel.c in libcurl 7.30.0 through 7.51.0, when built for Windows CE using the schannel TLS backend, makes it easier for remote attackers to conduct man-in-the-middle attacks via a crafted wildcard SAN in a server certificate, as demonstrated by "*.com."

Jenkins Amazon EC2 Plugin 1.50.1 and earlier unconditionally accepts self-signed certificates and does not perform hostname validation, enabling man-in-the-middle attacks.

Graylog before 3.3.3 lacks SSL Certificate Validation for LDAP servers. It allows use of an external user/group database stored in LDAP. The connection configuration allows the usage of unencrypted, SSL- or TLS-secured connections. Unfortunately, the Graylog client code (in all versions that support LDAP) does not implement proper certificate validation (regardless of whether the "Allow self-signed certificates" option is used). Therefore, any attacker with the ability to intercept network traffic between a Graylog server and an LDAP server is able to redirect traffic to a different LDAP server (unnoticed by the Graylog server due to the lack of certificate validation), effectively bypassing Graylog's authentication mechanism.

Google Chrome before 14.0.835.163 does not perform an expected pin operation for a self-signed certificate during a session, which has unspecified impact and remote attack vectors.

In Java-WebSocket less than or equal to 1.4.1, there is an Improper Validation of Certificate with Host Mismatch where WebSocketClient does not perform SSL hostname validation. This has been patched in 1.5.0.

NETGEAR Multiple Routers curl_post Improper Certificate Validation Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to compromise the integrity of downloaded information on affected installations of multiple NETGEAR routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the update functionality, which operates over HTTPS. The issue results from the lack of proper validation of the certificate presented by the server. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of root. Was ZDI-CAN-19981.

Mozilla Network Security Services (NSS) before 3.12.3, Firefox before 3.0.13, Thunderbird before 2.0.0.23, and SeaMonkey before 1.1.18 do not properly handle a '\0' character in a domain name in the subject's Common Name (CN) field of an X.509 certificate, which allows man-in-the-middle attackers to spoof arbitrary SSL servers via a crafted certificate issued by a legitimate Certification Authority. NOTE: this was originally reported for Firefox before 3.5.