When Connect workers in Apache Kafka 2.0.0, 2.0.1, 2.1.0, 2.1.1, 2.2.0, 2.2.1, or 2.3.0 are configured with one or more config providers, and a connector is created/updated on that Connect cluster to use an externalized secret variable in a substring of a connector configuration property value, then any client can issue a request to the same Connect cluster to obtain the connector's task configuration and the response will contain the plaintext secret rather than the externalized secrets variables.

Due to unencrypted and unauthenticated data communication, the wireless barcode scanner Inateck BCST-60 is prone to keystroke injection attacks. Thus, an attacker is able to send arbitrary keystrokes to a victim's computer system, e.g., to install malware when the target system is unattended. In this way, an attacker can remotely take control over the victim's computer that is operated with an affected receiver of this device.

Anviz access control devices perform cleartext transmission of sensitive information (passwords/pins and names) when replying to query on port tcp/5010.

An issue was discovered in Django 1.11 before 1.11.22, 2.1 before 2.1.10, and 2.2 before 2.2.3. An HTTP request is not redirected to HTTPS when the SECURE_PROXY_SSL_HEADER and SECURE_SSL_REDIRECT settings are used, and the proxy connects to Django via HTTPS. In other words, django.http.HttpRequest.scheme has incorrect behavior when a client uses HTTP.

The affected product transmits unencrypted sensitive information, which may allow an attacker to access this information on the NIO 50 (all versions).

The built-in WEB server for MOXA NPort IAW5000A-I/O firmware version 2.1 or lower stores and transmits the credentials of third-party services in cleartext.

A flaw was found in the Linux kernel in versions before 5.9-rc7. Traffic between two Geneve endpoints may be unencrypted when IPsec is configured to encrypt traffic for the specific UDP port used by the GENEVE tunnel allowing anyone between the two endpoints to read the traffic unencrypted. The main threat from this vulnerability is to data confidentiality.

The affected Reolink P2P products do not sufficiently protect data transferred between the local device and Reolink servers. This can allow an attacker to access sensitive information, such as camera feeds.

Jenkins Aqua Security Scanner Plugin 3.0.17 and earlier transmitted configured credentials in plain text as part of the global Jenkins configuration form, potentially resulting in their exposure.

Jenkins Aqua MicroScanner Plugin 1.0.7 and earlier transmitted configured credentials in plain text as part of the global Jenkins configuration form, potentially resulting in their exposure.

Jenkins Inedo BuildMaster Plugin 2.4.0 and earlier transmitted configured credentials in plain text as part of the global Jenkins configuration form, potentially resulting in their exposure.

translate/translate_manager.cc in Google Chrome before 17.0.963.56 and 19.x before 19.0.1036.7 uses an HTTP session to exchange data for translation, which allows remote attackers to obtain sensitive information by sniffing the network.

Jenkins SourceGear Vault Plugin transmits configured credentials in plain text as part of job configuration forms, potentially resulting in their exposure.

Jenkins Inedo ProGet Plugin 1.2 and earlier transmitted configured credentials in plain text as part of the global Jenkins configuration form, potentially resulting in their exposure.

Handling of the close_notify SSL/TLS message does not lead to a connection closure, leading the server to retain the socket opened and to have the client potentially receive clear text messages afterward. Mitigation: 2.0.20 users should migrate to 2.0.21, 2.1.0 users should migrate to 2.1.1. This issue affects: Apache MINA.

Jenkins Repository Connector Plugin 1.2.6 and earlier transmits configured credentials in plain text as part of its global Jenkins configuration form, potentially resulting in their exposure.

Jenkins Sonar Quality Gates Plugin 1.3.1 and earlier transmits configured credentials in plain text as part of its global Jenkins configuration form, potentially resulting in their exposure.

Jenkins Quality Gates Plugin 2.5 and earlier transmits configured credentials in plain text as part of its global Jenkins configuration form, potentially resulting in their exposure.

A cleartext transmission of sensitive information vulnerability exists in Schneider Electric's 66074 MGE Network Management Card Transverse installed in MGE UPS and MGE STS. he integrated web server (Port 80/443/TCP) of the affected devices could allow remote attackers to discover an administrative account. If default on device, it is not using a SSL in settings and if multiple request of the page "Access Control" (IP-address device/ups/pas_cont.htm) account data will be sent in cleartext

An issue was discovered in certain Apple products. iOS before 11.4 is affected. macOS before 10.13.5 is affected. The issue involves the "Mail" component. It allows remote attackers to read the cleartext content of S/MIME encrypted messages via direct exfiltration.

A cleartext transmission of sensitive information vulnerability has been reported to affect certain QTS devices. If exploited, this vulnerability allows a remote attacker to gain access to sensitive information. QNAP have already fixed this vulnerability in the following versions: QTS 4.4.3.1354 build 20200702 (and later)

The Google Cardboard application 1.8 for Android and 1.2 for iOS sends potentially private cleartext information to the Unity 3D Stats web site, as demonstrated by device make, model, and OS.

An issue was discovered in the Daimler Mercedes-Benz Me app 2.11.0-846 for iOS. The encrypted Connected Vehicle API data exchange between the app and a server might be intercepted. The app can be used to operate the Remote Parking Pilot, unlock the vehicle, or obtain sensitive information such as latitude, longitude, and direction of travel.

IBM BigFix Platform 9.2 and 9.5 transmits sensitive or security-critical data in clear text in a communication channel that can be sniffed by unauthorized actors. IBM X-Force ID: 143745.

When users are configured to use startTLS with RBAC LDAP, at login time, the user's credentials are sent via plaintext to the LDAP server. This affects Puppet Enterprise 2018.1.3, 2017.3.9, and 2016.4.14, and is fixed in Puppet Enterprise 2018.1.4, 2017.3.10, and 2016.4.15. It scored an 8.5 CVSS score.

Intuit Lacerte 2017 for Windows in a client/server environment transfers the entire customer list in cleartext over SMB, which allows attackers to (1) obtain sensitive information by sniffing the network or (2) conduct man-in-the-middle (MITM) attacks via unspecified vectors. The customer list contains each customer's full name, social security number (SSN), address, job title, phone number, Email address, spouse's phone/Email address, and other sensitive information. After the client software authenticates to the server database, the server sends the customer list. There is no need for further exploitation as all sensitive data is exposed. This vulnerability was validated on Intuit Lacerte 2017, however older versions of Lacerte may be vulnerable.

Moxa OnCell G3100-HSPA Series version 1.6 Build 17100315 and prior use a proprietary monitoring protocol that does not provide confidentiality, integrity, and authenticity security controls. All information is sent in plain text, and can be intercepted and modified. The protocol is vulnerable to remote unauthenticated disclosure of sensitive information, including the administrator's password. Under certain conditions, it's also possible to retrieve additional information, such as content of HTTP requests to the device, or the previously used password, due to memory leakages.

Fresenius Kabi Agilia Link + version 3.0 does not enforce transport layer encryption. Therefore, transmitted data may be sent in cleartext. Transport layer encryption is offered on Port TCP/443, but the affected service does not perform an automated redirect from the unencrypted service on Port TCP/80 to the encrypted service.

An information disclosure vulnerability exists in the Web Application functionality of Moxa MXView Series 3.2.4. Network sniffing can lead to a disclosure of sensitive information. An attacker can sniff network traffic to exploit this vulnerability.

An issue was discovered in certain Apple products. iOS before 11 is affected. macOS before 10.13 is affected. The issue involves the "Mail Drafts" component. It allows remote attackers to obtain sensitive information by reading unintended cleartext transmissions.

An issue was discovered in certain Apple products. iOS before 11 is affected. The issue involves the "MobileBackup" component. It allows remote attackers to obtain sensitive cleartext information in opportunistic circumstances by leveraging read access to a backup archive that was supposed to have been encrypted.

During a routine security analysis, it was found that one of the ports in Apache Impala (incubating) 2.7.0 to 2.8.0 sent data in plaintext even when the cluster was configured to use TLS. The port in question was used by the StatestoreSubscriber class which did not use the appropriate secure Thrift transport when TLS was turned on. It was therefore possible for an adversary, with access to the network, to eavesdrop on the packets going to and coming from that port and view the data in plaintext.

An API Privilege vulnerability in Cisco TelePresence Server Software could allow an unauthenticated, remote attacker to emulate Cisco TelePresence Server endpoints. Affected Products: This vulnerability affects Cisco TelePresence Server MSE 8710 Processors that are running a software release prior to Cisco TelePresence Software Release 4.3 and are running in locally managed mode. The vulnerable API was deprecated in Cisco TelePresence Software Release 4.3. More Information: CSCvc37616.

pgsync before 0.6.7 is affected by Information Disclosure of sensitive information. Syncing the schema with the --schema-first and --schema-only options is mishandled. For example, the sslmode connection parameter may be lost, which means that SSL would not be used.

In the "NQ Contacts Backup & Restore" application 1.1 for Android, no HTTPS is used for transmitting login and synced user data. When logging in, the username is transmitted in cleartext along with an SHA-1 hash of the password. The attacker can either crack this hash or use it for further attacks where only the hash value is required.

The vulnerability exists in TP-Link TL-WR841N V11 3.16.9 Build 160325 Rel.62500n wireless router due to transmission of authentication information in cleartextbase64 format. Successful exploitation of this vulnerability could allow a remote attacker to intercept credentials and subsequently perform administrative operations on the affected device through web-based management interface.

A user can tell curl >= 7.20.0 and <= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network.

Cleartext Transmission of Sensitive Information vulnerability due to the use of Basic Authentication for HTTP connections in Mitsubishi Electric consumer electronics products (PHOTOVOLTAIC COLOR MONITOR ECO-GUIDE, HEMS adapter, Wi-Fi Interface, Air Conditioning, Induction hob, Mitsubishi Electric HEMS Energy Measurement Unit, Refrigerator, Remote control with Wi-Fi Interface, BATHROOM THERMO VENTILATOR, Rice cooker, Mitsubishi Electric HEMS control adapter, Energy Recovery Ventilator, Smart Switch, Ventilating Fan, Range hood fan, Energy Measurement Unit and Air Purifier) allows a remote unauthenticated attacker to disclose information in the products or cause a denial of service (DoS) condition as a result by sniffing credential information (username and password). The wide range of models/versions of Mitsubishi Electric consumer electronics products are affected by this vulnerability. As for the affected product models/versions, see the Mitsubishi Electric's advisory which is listed in [References] section.

An issue was discovered in certain Apple products. The Apple Support app before 1.2 for iOS is affected. The issue involves the "Analytics" component. It allows remote attackers to obtain sensitive analytics information by leveraging its presence in a cleartext HTTP transmission to an Adobe Marketing Cloud server operated for Apple, as demonstrated by information about the installation date and time.

Netgear Nighthawk R6700 version 1.0.4.120 does not utilize secure communication methods to the web interface. By default, all communication to/from the device's web interface is sent via HTTP, which causes potentially sensitive information (such as usernames and passwords) to be transmitted in cleartext.

Netgear Nighthawk R6700 version 1.0.4.120 does not utilize secure communication methods to the SOAP interface. By default, all communication to/from the device's SOAP Interface (port 5000) is sent via HTTP, which causes potentially sensitive information (such as usernames and passwords) to be transmitted in cleartext

Rubetek SmartHome 2020 devices use unencrypted 433 MHz communication between controllers and beacons, allowing an attacker to sniff and spoof beacon requests remotely.

In JetBrains GoLand before 2019.3.2, the plugin repository was accessed via HTTP instead of HTTPS.

In Moxa ioLogik 2500 series firmware, Version 3.0 or lower, and IOxpress configuration utility, Version 2.3.0 or lower, sensitive information is transmitted over some web applications in clear text.

SAP Solution Manager (Diagnostics Agent), version 720, allows unencrypted connections from unauthenticated sources. This allows an attacker to control all remote functions on the Agent due to Missing Authentication Check.

Scheduler for TAS prior to version 1.4.0 was permitting plaintext transmission of UAA client token by sending it over a non-TLS connection. This also depended on the configuration of the MySQL server which is used to cache a UAA client token used by the service. If intercepted the token can give an attacker admin level access in the cloud controller.

An issue was discovered on MOBOTIX S14 MX-V4.2.1.61 devices. The default management application is delivered over cleartext HTTP with Basic Authentication, as demonstrated by the /admin/index.html URI.

Last Yard 22.09.8-1 does not enforce HSTS headers