The client 802.11 mac implementation in Espressif ESP8266_NONOS_SDK 2.2.0 through 3.1.0 does not validate correctly the RSN AuthKey suite list count in beacon frames, probe responses, and association responses, which allows attackers in radio range to cause a denial of service (crash) via a crafted message.
The Bluetooth Classic implementation in Espressif ESP-IDF 4.4 and earlier does not properly handle the reception of multiple LMP IO Capability Request packets during the pairing process, allowing attackers in radio range to trigger memory corruption (and consequently a crash) in ESP32 via a replayed (duplicated) LMP packet.
The Bluetooth Low Energy (BLE) controller implementation in Espressif ESP-IDF 4.0 through 4.2 (for ESP32 devices) returns the wrong number of completed BLE packets and triggers a reachable assertion on the host stack when receiving a packet with an MIC failure. An attacker within radio range can silently trigger the assertion (which disables the target's BLE stack) by sending a crafted sequence of BLE packets.
The Bluetooth Classic implementation in Espressif ESP-IDF 4.4 and earlier does not properly handle the reception of continuous unsolicited LMP responses, allowing attackers in radio range to trigger a denial of service (crash) in ESP32 by flooding the target device with LMP Feature Response data.
The EAP peer implementation in Espressif ESP-IDF 2.0.0 through 4.0.0 and ESP8266_NONOS_SDK 2.2.0 through 3.1.0 processes EAP Success messages before any EAP method completion or failure, which allows attackers in radio range to cause a denial of service (crash) via a crafted message.
An issue was discovered in Espressif ESP-IDF 2.x and 3.x before 3.0.6 and 3.1.x before 3.1.1. Insufficient validation of input data in the 2nd stage bootloader allows a physically proximate attacker to bypass secure boot checks and execute arbitrary code, by crafting an application binary that overwrites a bootloader code segment in process_segment in components/bootloader_support/src/esp_image_format.c. The attack is effective when the flash encryption feature is not enabled, or if the attacker finds a different vulnerability that allows them to write this binary to flash memory.
arduino-esp32 is an Arduino core for the ESP32, ESP32-S2, ESP32-S3, ESP32-C3, ESP32-C6 and ESP32-H2 microcontrollers. The `arduino-esp32` CI is vulnerable to multiple Poisoned Pipeline Execution (PPE) vulnerabilities. Code injection in `tests_results.yml` workflow (`GHSL-2024-169`) and environment Variable injection (`GHSL-2024-170`). These issue have been addressed but users are advised to verify the contents of the downloaded artifacts.
Insufficient input validation vulnerability in subsystem for Intel(R) AMT before versions 11.8.65, 11.11.65, 11.22.65, 12.0.35 may allow an unauthenticated user to potentially enable denial of service via adjacent network access.
A vulnerability has been identified in SIMATIC S7-400 CPU 414-3 PN/DP V7 (All versions < V7.0.3), SIMATIC S7-400 CPU 414F-3 PN/DP V7 (All versions < V7.0.3), SIMATIC S7-400 CPU 416-3 PN/DP V7 (All versions < V7.0.3), SIMATIC S7-400 CPU 416F-3 PN/DP V7 (All versions < V7.0.3), SIMATIC CP 343-1 (incl. SIPLUS variants) (All versions), SIMATIC CP 343-1 Advanced (incl. SIPLUS variants) (All versions), SIMATIC CP 443-1 (All versions < V3.3), SIMATIC CP 443-1 (All versions < V3.3), SIMATIC CP 443-1 Advanced (All versions < V3.3), SIMATIC ET 200pro IM154-8 PN/DP CPU (All versions < V3.2.16), SIMATIC ET 200pro IM154-8F PN/DP CPU (All versions < V3.2.16), SIMATIC ET 200pro IM154-8FX PN/DP CPU (All versions < V3.2.16), SIMATIC ET 200S IM151-8 PN/DP CPU (All versions < V3.2.16), SIMATIC ET 200S IM151-8F PN/DP CPU (All versions < V3.2.16), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions < V1.7.0), SIMATIC S7-1500 Software Controller (All versions < V1.7.0), SIMATIC S7-300 CPU 314C-2 PN/DP (All versions < V3.3.16), SIMATIC S7-300 CPU 315-2 PN/DP (All versions < V3.2.16), SIMATIC S7-300 CPU 315F-2 PN/DP (All versions < V3.2.16), SIMATIC S7-300 CPU 315T-3 PN/DP (All versions < V3.2.16), SIMATIC S7-300 CPU 317-2 PN/DP (All versions < V3.2.16), SIMATIC S7-300 CPU 317F-2 PN/DP (All versions < V3.2.16), SIMATIC S7-300 CPU 317T-3 PN/DP (All versions < V3.2.16), SIMATIC S7-300 CPU 317TF-3 PN/DP (All versions < V3.2.16), SIMATIC S7-300 CPU 319-3 PN/DP (All versions < V3.2.16), SIMATIC S7-300 CPU 319F-3 PN/DP (All versions < V3.2.16), SIMATIC S7-400 CPU 412-2 PN V7 (All versions < V7.0.3), SIMATIC S7-400 H V6 CPU family (incl. SIPLUS variants) (All versions < V6.0.9), SIMATIC S7-400 PN/DP V6 CPU family (incl. SIPLUS variants) (All versions < V6.0.7), SIMATIC S7-410 CPU family (incl. SIPLUS variants) (All versions < V8.1), SIMATIC WinAC RTX 2010 (All versions < V2010 SP3), SIMATIC WinAC RTX F 2010 (All versions < V2010 SP3), SINUMERIK 828D (All versions < V4.7 SP6 HF1), SIPLUS ET 200S IM151-8 PN/DP CPU (All versions < V3.2.16), SIPLUS ET 200S IM151-8F PN/DP CPU (All versions < V3.2.16), SIPLUS NET CP 443-1 (All versions < V3.3), SIPLUS NET CP 443-1 Advanced (All versions < V3.3), SIPLUS S7-300 CPU 314C-2 PN/DP (All versions < V3.3.16), SIPLUS S7-300 CPU 315-2 PN/DP (All versions < V3.2.16), SIPLUS S7-300 CPU 315F-2 PN/DP (All versions < V3.2.16), SIPLUS S7-300 CPU 317-2 PN/DP (All versions < V3.2.16), SIPLUS S7-300 CPU 317F-2 PN/DP (All versions < V3.2.16), SIPLUS S7-400 CPU 414-3 PN/DP V7 (All versions < V7.0.3), SIPLUS S7-400 CPU 416-3 PN/DP V7 (All versions < V7.0.3), Softnet PROFINET IO for PC-based Windows systems (All versions). Responding to a PROFINET DCP request with a specially crafted PROFINET DCP packet could cause a denial of service condition of the requesting system. The security vulnerability could be exploited by an attacker located on the same Ethernet segment (OSI Layer 2) as the targeted device. A manual restart is required to recover the system.
An invalid ‘prepare write request’ command can cause the Bluetooth LE stack to run out of memory and fail to be able to handle subsequent connection requests, resulting in a denial-of-service.
Improper input validation for some Intel(R) Wireless Bluetooth(R) products for Windows before version 23.40 may allow an unauthenticated user to potentially enable denial of service via adjacent access.
An Improper Input Validation vulnerability in Juniper Tunnel Driver (jtd) and ICMP module of Juniper Networks Junos OS Evolved allows an unauthenticated attacker within the MPLS administrative domain to send specifically crafted packets to the Routing Engine (RE) to cause a Denial of Service (DoS). When specifically crafted transit MPLS IPv4 packets are received by the Packet Forwarding Engine (PFE), these packets are internally forwarded to the RE. Continued receipt of these packets may create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS: * All versions before 21.2R3-S8-EVO; * from 21.4-EVO before 21.4R3-S6-EVO; * from 22.2-EVO before 22.2R3-S4-EVO; * from 22.3-EVO before 22.3R3-S3-EVO; * from 22.4-EVO before 22.4R3-EVO; * from 23.2-EVO before 23.2R2-EVO. * from 23.4-EVO before 23.4R1-S1-EVO.
ASUS Japan WL-330NUL devices with firmware before 3.0.0.42 allow remote attackers to cause a denial of service via unspecified vectors.
There is an Input verification vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may cause Bluetooth DoS.
Drager Infinity Delta, Infinity Delta, all versions, Delta XL, all versions, Kappa, all version, and Infinity Explorer C700, all versions. A malformed network packet may cause the monitor to reboot. By repeatedly sending the malformed network packet, an attacker may be able to disrupt patient monitoring by causing the monitor to repeatedly reboot until it falls back to default configuration and loses network connectivity.
A vulnerability in the WPA2 and WPA3 security implementation of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect packet processing during the WPA2 and WPA3 authentication handshake when configured for dot1x or pre-shared key (PSK) authentication key management (AKM) with 802.11r BSS Fast Transition (FT) enabled. An attacker could exploit this vulnerability by sending a crafted authentication packet to an affected device. A successful exploit could cause an affected device to reload, resulting in a DoS condition.
The Bluetooth subsystem in Apple OS X before 10.10.5 allows remote attackers to cause a denial of service via malformed Bluetooth ACL packets.
The receive_ra function in rdisc/nm-lndp-rdisc.c in the Neighbor Discovery (ND) protocol implementation in the IPv6 stack in NetworkManager 1.x allows remote attackers to reconfigure a hop-limit setting via a small hop_limit value in a Router Advertisement (RA) message, a similar issue to CVE-2015-2922.
Realtek RTL8762EKF-EVB RTL8762E SDK V1.4.0 was discovered to utilize insufficient permission checks on critical fields within Bluetooth Low Energy (BLE) data packets. This issue allows attackers to cause a Denial of Service (DoS) via a crafted LL_Length_Req packet.
Certain NETGEAR devices are affected by denial of service. This affects GS110EMX before 1.0.0.9, GS810EMX before 1.0.0.5, XS512EM before 1.0.0.6, and XS724EM before 1.0.0.6.
The web interface in TP-Link TL-WRN841N 0.9.1 4.16 v0348.0 is vulnerable to a denial of service when an unauthenticated LAN user sends a crafted HTTP header containing an unexpected Cookie field.
A vulnerability has been identified in BACnet ATEC 550-440 (All versions), BACnet ATEC 550-441 (All versions), BACnet ATEC 550-445 (All versions), BACnet ATEC 550-446 (All versions). Affected devices improperly handle specific incoming BACnet MSTP messages. This could allow an attacker residing in the same BACnet network to send a specially crafted MSTP message that results in a denial of service condition of the targeted device. A power cycle is required to restore the device's normal operation.
Harman Becker MGU21 Bluetooth Improper Input Validation Denial-of-Service Vulnerability. This vulnerability allows network-adjacent attackers to create a denial-of-service condition on affected installations of Harman Becker MGU21 devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the Bluetooth stack of the BCM89359 chipset. The issue results from the lack of proper validation of Bluetooth frames. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-23942.
A missing input sanitization flaw was found in the implementation of LDP database used for the LDAP server. An attacker could use this flaw to cause a denial of service against a samba server, used as a Active Directory Domain Controller. All versions of Samba from 4.8.0 onwards are vulnerable
On Phoenix Contact PLCnext Control Devices versions before 2021.0 LTS a specially crafted LLDP packet may lead to a high system load in the PROFINET stack. An attacker can cause failure of system services or a complete reboot.
An Improper Input Validation vulnerability in the VxLAN packet forwarding engine (PFE) of Juniper Networks Junos OS on QFX5000 Series, EX4600 Series devices allows an unauthenticated, adjacent attacker, sending two or more genuine packets in the same VxLAN topology to possibly cause a DMA memory leak to occur under various specific operational conditions. The scenario described here is the worst-case scenario. There are other scenarios that require operator action to occur. An indicator of compromise may be seen when multiple devices indicate that FPC0 has gone missing when issuing a show chassis fpc command for about 10 to 20 minutes, and a number of interfaces have also gone missing. Use the following command to determine if FPC0 has gone missing from the device. show chassis fpc detail This issue affects: Juniper Networks Junos OS on QFX5000 Series, EX4600 Series: * 18.4 version 18.4R2 and later versions prior to 20.4R3-S8; * 21.1 version 21.1R1 and later versions prior to 21.2R3-S6; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S4; * 22.1 versions prior to 22.1R3-S3; * 22.2 versions prior to 22.2R3-S1; * 22.3 versions prior to 22.3R2-S2, 22.3R3; * 22.4 versions prior to 22.4R2.
An Improper Validation of Syntactic Correctness of Input vulnerability in Routing Protocol Daemon (rpd) Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network based attacker to cause a Denial of Service (DoS). When a malformed BGP UPDATE packet is received over an established BGP session, the rpd crashes and restarts. This issue affects both eBGP and iBGP implementations. This issue affects: Juniper Networks Junos OS * 21.4 versions prior to 21.4R3-S4; * 22.1 versions prior to 22.1R3-S3; * 22.2 versions prior to 22.2R3-S2; * 22.3 versions prior to 22.3R2-S2, 22.3R3; * 22.4 versions prior to 22.4R2-S1, 22.4R3; * 23.2 versions prior to 23.2R1, 23.2R2; Juniper Networks Junos OS Evolved * 21.4 versions prior to 21.4R3-S5-EVO; * 22.1 versions prior to 22.1R3-S3-EVO; * 22.2 versions prior to 22.2R3-S3-EVO; * 22.3 versions prior to 22.3R2-S2-EVO; * 22.4 versions prior to 22.4R3-EVO; * 23.2 versions prior to 23.2R2-EVO;
A vulnerability has been identified in MS/TP Point Pickup Module (All versions). Affected devices improperly handle specific incoming BACnet MSTP messages. This could allow an attacker residing in the same BACnet network to send a specially crafted MSTP message that results in a denial of service condition of the targeted device. A power cycle is required to restore the device's normal operation.
A vulnerability when handling incoming 802.11 Association Requests for Cisco Aironet 1800 Series Access Point (APs) on Qualcomm Atheros (QCA) based hardware platforms could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected system. A successful exploit could prevent new clients from joining the AP. The vulnerability is due to incorrect handling of malformed or invalid 802.11 Association Requests. An attacker could exploit this vulnerability by sending a malformed stream of 802.11 Association Requests to the local interface of the targeted device. A successful exploit could allow the attacker to cause a DoS situation on an affected system, causing new client 802.11 Association Requests to fail. This vulnerability affects the following Cisco products: Aironet 1560 Series Access Points, Aironet 1810 Series OfficeExtend Access Points, Aironet 1810w Series Access Points, Aironet 1815 Series Access Points, Aironet 1830 Series Access Points, Aironet 1850 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Cisco Bug IDs: CSCvg02116.
The sys_recvfrom function in nmbd in Samba 3.6.x before 3.6.24, 4.0.x before 4.0.19, and 4.1.x before 4.1.9 allows remote attackers to cause a denial of service (infinite loop and CPU consumption) via a malformed UDP packet.
A vulnerability in the VLAN Trunking Protocol (VTP) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to corrupt the internal VTP database on an affected device and cause a denial of service (DoS) condition. The vulnerability is due to a logic error in how the affected software handles a subset of VTP packets. An attacker could exploit this vulnerability by sending VTP packets in a sequence that triggers a timeout in the VTP message processing code of the affected software. A successful exploit could allow the attacker to impact the ability to create, modify, or delete VLANs and cause a DoS condition. There are workarounds that address this vulnerability. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS Software or Cisco IOS XE Software, are operating in VTP client mode or VTP server mode, and do not have a VTP domain name configured. The default configuration for Cisco devices that are running Cisco IOS Software or Cisco IOS XE Software and support VTP is to operate in VTP server mode with no domain name configured.
Improper input validation for some Intel(R) PROSet/Wireless and Intel(R) Killer(TM) Wi-Fi software before version 22.240 may allow an unauthenticated user to potentially enable denial of service via adjacent access.
An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a UPnP functionality for devices to interface with the router and interact with the device. It seems that the "NewInMessage" SOAP parameter passed with a huge payload results in crashing the process. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "miniupnpd" is the one that has the vulnerable function that receives the values sent by the SOAP request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function WscDevPutMessage at address 0x0041DBB8 in IDA pro is identified to be receiving the values sent in the SOAP request. The SOAP parameter "NewInMesage" received at address 0x0041DC30 causes the miniupnpd process to finally crash when a second request is sent to the same process.
Wireshark (formerly Ethereal) 0.10.14 through 1.0.2 allows attackers to cause a denial of service (crash) via a packet with crafted zlib-compressed data that triggers an invalid read in the tvb_uncompress function.
A vulnerability in the Cisco Discovery Protocol (formerly known as CDP) subsystem of devices running, or based on, Cisco NX-OS Software contain a vulnerability that could allow an unauthenticated, adjacent attacker to create a denial of service (DoS) condition. The vulnerability is due to a failure to properly validate certain fields within a Cisco Discovery Protocol message prior to processing it. An attacker with the ability to submit a Cisco Discovery Protocol message designed to trigger the issue could cause a DoS condition on an affected device while the device restarts. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc89242, CSCve40943, CSCve40953, CSCve40965, CSCve40970, CSCve40978, CSCve40992, CSCve41000, CSCve41007.
Unspecified vulnerability in Wireshark (formerly Ethereal) 0.99.6 through 1.0.2 allows attackers to cause a denial of service (crash) via a crafted Tektronix .rf5 file.
Improper handling of ASB-C broadcast packets with crafted opcode in LMP can lead to uncontrolled resource consumption in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking
In Open vSwitch (OvS) 2.7.0, while parsing an OpenFlow role status message, there is a call to the abort() function for undefined role status reasons in the function `ofp_print_role_status_message` in `lib/ofp-print.c` that may be leveraged toward a remote DoS attack by a malicious switch.
Improper input validation in software for Intel(R) PROSet/Wireless Wi-Fi and Killer(TM) Wi-Fi in Windows 10 and 11 may allow an unauthenticated user to potentially enable denial of service via adjacent access.
A vulnerability in the distributed or centralized periodic packet management daemon (PPMD) of Juniper Networks Junos OS may cause receipt of a malformed packet to crash and restart the PPMD process, leading to network destabilization, service interruption, and a Denial of Service (DoS) condition. Continued receipt and processing of these malformed packets will repeatedly crash the PPMD process and sustain the Denial of Service (DoS) condition. Due to the nature of the specifically crafted packet, exploitation of this issue requires direct, adjacent connectivity to the vulnerable component. This issue affects Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S12, 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R2-S8, 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S4; 19.2 versions prior to 19.2R1-S5, 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3-S1; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2.
An improper input validation vulnerability in the Routing Protocol Daemon (RPD) service of Juniper Networks Junos OS allows an attacker to send a malformed RSVP packet when bidirectional LSPs are in use, which when received by an egress router crashes the RPD causing a Denial of Service (DoS) condition. Continued receipt of the packet will sustain the Denial of Service. This issue affects: Juniper Networks Junos OS: All versions prior to 17.3R3-S10 except 15.1X49-D240 for SRX series; 17.4 versions prior to 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S4; 18.3 versions prior to 18.3R3-S2; 18.4 versions prior to 18.4R1-S8, 18.4R2-S6, 18.4R3-S2; 19.1 versions prior to 19.1R1-S5, 19.1R3-S3; 19.2 versions prior to 19.2R3; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R2-S2, 19.4R3-S1; 20.1 versions prior to 20.1R1-S4, 20.1R2; 15.1X49 versions prior to 15.1X49-D240 on SRX Series. Juniper Networks Junos OS Evolved: 19.3 versions prior to 19.3R2-S5-EVO; 19.4 versions prior to 19.4R2-S2-EVO; 20.1 versions prior to 20.1R1-S4-EVO.
Improper Validation of Specified Index, Position, or Offset in Input in software for some Intel(R) PROSet/Wireless Wi-Fi in multiple operating systems and some Killer(TM) Wi-Fi in Windows 10 and 11 may allow an unauthenticated user to potentially enable denial of service via adjacent access.
Improper Use of Validation Framework in firmware for some Intel(R) PROSet/Wireless Wi-Fi in multiple operating systems and some Killer(TM) Wi-Fi in Windows 10 and 11 may allow a unauthenticated user to potentially enable denial of service via adjacent access.
Improper Validation of Consistency within input in software for Intel(R) PROSet/Wireless Wi-Fi and Killer(TM) Wi-Fi in Windows 10 and 11 may allow an unauthenticated user to potentially enable denial of service via adjacent access.
Improper input validation in firmware for some Intel(R) PROSet/Wireless Wi-Fi in multiple operating systems and some Killer(TM) Wi-Fi in Windows 10 and 11 may allow an unauthenticated user to potentially enable denial of service via adjacent access.
Improper Validation of Consistency within input in firmware for some Intel(R) PROSet/Wireless Wi-Fi in multiple operating systems and some Killer(TM) Wi-Fi in Windows 10 and 11 may allow a unauthenticated user to potentially enable denial of service via adjacent access.
Improper input validation in firmware for Intel(R) PROSet/Wireless Wi-Fi in multiple operating systems and Killer(TM) Wi-Fi in Windows 10 and 11 may allow an unauthenticated user to potentially enable denial of service via adjacent access.
Improper Use of Validation Framework in software for Intel(R) PROSet/Wireless Wi-Fi and Killer(TM) Wi-Fi in Windows 10 and 11 may allow an unauthenticated user to potentially enable denial of service via adjacent access.
CWE-20: Improper Input Validation vulnerability exists that could cause Denial-of-Service of the product when malicious ICMPV6 packets are sent to the device.
An Improper Input Validation vulnerability in the active-lease query portion in JDHCPD's DHCP Relay Agent of Juniper Networks Junos OS allows an attacker to cause a Denial of Service (DoS) by sending a crafted DHCP packet to the device thereby crashing the jdhcpd DHCP service. This is typically configured for Broadband Subscriber Sessions. Continued receipt and processing of this crafted packet will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS: 19.4 versions prior to 19.4R3-S1; 20.1 versions prior to 20.1R2-S1, 20.1R3; 20.2 versions prior to 20.2R3; 20.3 versions prior to 20.3R2. This issue does not affect Junos OS Evolved.