The dns-sync module before 0.1.1 for node.js allows context-dependent attackers to execute arbitrary commands via shell metacharacters in the first argument to the resolve API function.

Buffer overflow in an ActiveX control in MDraw30.ocx in Schneider Electric ProClima before 6.1.7 allows remote attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2014-8513 and CVE-2014-8514. NOTE: this may be clarified later based on details provided by researchers.

The remote administration interface in D-Link DIR-815 devices with firmware before 2.03.B02 allows remote attackers to execute arbitrary commands via vectors related to an "HTTP command injection issue."

EnerSys AMPA 22.09 and prior versions are vulnerable to command injection leading to privileged remote shell access.

CVE-2024-45824 IMPACT A remote code vulnerability exists in the affected products. The vulnerability occurs when chained with Path Traversal, Command Injection, and XSS Vulnerabilities and allows for full unauthenticated remote code execution. The link in the mitigations section below contains patches to fix this issue.

A Command injection vulnerability in requestLetsEncryptSsl in NginxProxyManager 2.11.3 allows an attacker to RCE via Add Let's Encrypt Certificate.

There is a command injection vulnerability that may allow an attacker to inject malicious input on the device's operating system.

A vulnerability was discovered in DI_8400-16.07.26A1, which has been classified as critical. This issue affects the upgrade_filter_asp function in the upgrade_filter.asp file. Manipulation of the path parameter can lead to command injection.

A specially crafted POST request to the ProGauge MAGLINK LX CONSOLE IP sub-menu can allow a remote attacker to inject arbitrary commands.

D-Link DI-8300 v16.07.26A1 is vulnerable to command injection via the upgrade_filter_asp function.

COMFAST CF-XR11 V2.7.2 has a command injection vulnerability in function sub_424CB4. Attackers can send POST request messages to /usr/bin/webmgnt and inject commands into parameter iface.

A vulnerability was found in ADSLR NBR1005GPEV2 250814-r037c. This issue affects the function set_mesh_disconnect of the file /send_order.cgi. The manipulation of the argument mac results in command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

D-Link DI_8004W 16.07.26A1 contains a command execution vulnerability in the jhttpd upgrade_filter_asp function.

Remote Code Execution vulnerability that allows unauthenticated attackers to inject arbitrary commands into the hostname of the device.

D-Link DI-8100G 17.12.20A1 is vulnerable to Command Injection via sub47A60C function in the upgrade_filter.asp file

D-Link DI-8100G 17.12.20A1 is vulnerable to Command Injection via msp_info.htm.

Command injection vulnerability in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

An OS command injection vulnerability exists in the sysupgrade command injection functionality of Robustel R1510 3.1.16 and 3.3.0. A specially-crafted network request can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger this vulnerability.

Improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in Task Manager component in Synology BeePhotos before 1.0.2-10026 and 1.1.0-10053 and Synology Photos before 1.6.2-0720 and 1.7.0-0795 allows remote attackers to execute arbitrary code via unspecified vectors.

A specially crafted POST request to the ProGauge MAGLINK LX CONSOLE UTILITY sub-menu can allow a remote attacker to inject arbitrary commands.

An issue in the handler function in /goform/telnet of Tenda FH1201 v1.2.0.14 (408) allows attackers to execute arbitrary commands via a crafted HTTP request.

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.1). The affected application contains a file upload server that is vulnerable to command injection. An attacker could use this to achieve arbitrary code execution.

The validateAdminConfig handler in the Analytics Management Console in HPE Vertica 7.0.x before 7.0.2.12, 7.1.x before 7.1.2-12, and 7.2.x before 7.2.2-1 allows remote attackers to execute arbitrary commands via the mcPort parameter, aka ZDI-CAN-3417.

This affects the package image-tiler before 2.0.2.

Beijing Digital China Cloud Technology Co., Ltd. DCME-320 v.7.4.12.60 has a command execution vulnerability, which can be exploited to obtain device administrator privileges via the getVar function in the code/function/system/tool/ping.php file.

LPAR2RRD ≤ 4.53 and ≤ 3.5 has arbitrary command injection on the application server.

Command injection vulnerabilities in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

A vulnerability has been found in Tenda AC6 15.03.05.19 and classified as critical. Affected by this vulnerability is the function formWriteFacMac of the file /goform/WriteFacMac of the component API Endpoint. The manipulation of the argument mac leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

SequenceServer lets you rapidly set up a BLAST+ server with an intuitive user interface for personal or group use. Several HTTP endpoints did not properly sanitize user input and/or query parameters. This could be exploited to inject and run unwanted shell commands. This vulnerability has been fixed in 3.1.2.

Command injection vulnerabilities in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

There is a command injection vulnerability in Huawei terminal printer product. Successful exploitation could result in the highest privileges of the printer. (Vulnerability ID: HWPSIRT-2022-51773) This vulnerability has been assigned a Common Vulnerabilities and Exposures (CVE) ID: CVE-2022-32203.

A vulnerability has been found in D-Link DI-7001 MINI 19.09.19A1/24.04.18B1. The affected element is an unknown function of the file /msp_info.htm. Such manipulation of the argument cmd leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

Improper Control of Generation of Code ('Code Injection'), Improper Neutralization of Special Elements used in a Command ('Command Injection'), Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in BG-TEK Informatics Security Technologies CoslatV3 allows Command Injection, Privilege Escalation.This issue affects CoslatV3: through 3.1069. NOTE: The vendor was contacted and it was learned that the product is not supported.

A command injection vulnerability in the apex-publish-static-files npm module version <2.0.1 which allows arbitrary shell command execution through a maliciously crafted argument.

Remote command injection vulnerability in heap profiler builtin service in Apache bRPC ((all versions < 1.15.0)) on all platforms allows attacker to inject remote command. Root Cause: The bRPC heap profiler built-in service (/pprof/heap) does not validate the user-provided extra_options parameter and executes it as a command-line argument. Attackers can execute remote commands using the extra_options parameter.. Affected scenarios: Use the built-in bRPC heap profiler service to perform jemalloc memory profiling. How to Fix: we provide two methods, you can choose one of them: 1. Upgrade bRPC to version 1.15.0. 2. Apply this patch ( https://github.com/apache/brpc/pull/3101 ) manually.

vRealize Network Insight (vRNI) contains a command injection vulnerability present in the vRNI REST API. A malicious actor with network access to the vRNI REST API can execute commands without authentication.

A vulnerability has been found in D-Link R15 (AX1500) 1.20.01 and below. By manipulating the model name parameter during a password change request in the web administrator page, it is possible to trigger a command injection in httpd.

This vulnerability allows authenticated attackers to execute arbitrary commands on the underlying system using the file name of an uploaded file.

Roxy-WI is a Web interface for managing HAProxy, Nginx and Keepalived servers. Prior to version 6.1.1.0, the system command can be run remotely via the subprocess_execute function without processing the inputs received from the user in the /app/options.py file. Version 6.1.1.0 contains a patch for this issue.

A vulnerability classified as critical was found in Totolink X2000R 1.0.0-B20221212.1452. Affected by this vulnerability is the function formMapDelDevice of the file /boafrm/formMapDelDevice. The manipulation of the argument macstr leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_cancel_wps function.

Eclipse Target Management: Terminal and Remote System Explorer (RSE) version <= 4.5.400 has a remote code execution vulnerability that does not require authentication. The fixed version is included in Eclipse IDE 2024-03

An issue in DLink DWR 2000M 5G CPE With Wifi 6 Ax1800 and Dlink DWR 5G CPE DWR-2000M_1.34ME allows a local attacker to execute arbitrary code via a crafted request.

Unrestricted file upload vulnerability in ls/vw_snapshots.php in the VideoWhisper Live Streaming Integration plugin before 4.29.5 for WordPress allows remote attackers to execute arbitrary PHP code by uploading a file with a double extension, and then accessing the file via a direct request to a wp-content/plugins/videowhisper-live-streaming-integration/ls/snapshots/ pathname, as demonstrated by a .php.jpg filename.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability that could allow an attacker to execute code in the context of the root user on a vulnerable CGI file was discovered in Western Digital My Cloud OS 5 devicesThis issue affects My Cloud OS 5: before 5.26.119.

LibreNMS v22.3.0 was discovered to contain multiple command injection vulnerabilities via the service_ip, hostname, and service_param parameters.

Improper Input Validation vulnerability in Hillstone Networks Hillstone Networks Web Application Firewall on 5.5R6 allows Command Injection.This issue affects Hillstone Networks Web Application Firewall: from 5.5R6-2.6.7 through 5.5R6-2.8.13.

TOTOLINK X18 V9.1.0cu.2053_B20230309 was discovered to contain a command injection vulnerability via the agentName parameter in the setEasyMeshAgentCfg function.

The LearnPress plugin for WordPress is vulnerable to Command Injection in all versions up to, and including, 4.2.5.7 via the get_content function. This is due to the plugin making use of the call_user_func function with user input. This makes it possible for unauthenticated attackers to execute any public function with one parameter, which could result in remote code execution.

A vulnerability was found in kalcaddle kodbox up to 1.48. It has been declared as critical. Affected by this vulnerability is the function check of the file plugins/officeViewer/controller/libreOffice/index.class.php. The manipulation of the argument soffice leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.48.04 is able to address this issue. The identifier of the patch is 63a4d5708d210f119c24afd941d01a943e25334c. It is recommended to upgrade the affected component. The identifier VDB-248209 was assigned to this vulnerability.