Insights for Vulnerability Remediation (IVR) is vulnerable to improper input validation. This may lead to information disclosure. This requires privileged access. 

The EMC RSA Identity Governance and Lifecycle, RSA Via Lifecycle and Governance and RSA IMG products (RSA Identity Governance and Lifecycle versions 7.0.1, 7.0.2, all patch levels; RSA Via Lifecycle and Governance version 7.0, all patch levels; RSA Identity Management and Governance (RSA IMG) versions 6.9.1, all patch levels) allow an application administrator to upload arbitrary files that may potentially contain a malicious code. The malicious file could be then executed on the affected system with the privileges of the user the application is running under.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects R6400 before 1.0.1.68, R7000 before 1.0.11.116, R6900P before 1.3.3.140, R7000P before 1.3.3.140, R7900 before 1.0.4.38, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, and XR300 before 1.0.3.50.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects R6400v2 before 1.0.4.118, R6700v3 before 1.0.4.118, R6900P before 1.3.3.140, R7000 before 1.0.11.126, R7000P before 1.3.3.140, RAX200 before 1.0.5.126, RAX75 before 1.0.5.126, and RAX80 before 1.0.5.126.

The dashboard subscription interface in Request Tracker (RT) 4.x before 4.0.25, 4.2.x before 4.2.14, and 4.4.x before 4.4.2 might allow remote authenticated users with certain privileges to execute arbitrary code via a crafted saved search name.

An issue was discovered in FusionPBX before 4.5.30. The fax_post_size may have risky characters (it is not constrained to preset values).

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. Due to insufficient input validation, remote attackers with low permissions could exploit this vulnerability by sending crafted commands to the affected device. Successful exploit could allow an attacker to execute commands.

An exploitable remote code execution vulnerability exists in the iw_webs configuration parsing functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted user name entry can cause an overflow of an error message buffer, resulting in remote code execution. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.

Heap buffer overflow in Clickhouse's LZ4 compression codec when parsing a malicious query. There is no verification that the copy operations in the LZ4::decompressImpl loop and especially the arbitrary copy operation wildCopy<copy_amount>(op, ip, copy_end), don’t exceed the destination buffer’s limits. This issue is very similar to CVE-2021-43304, but the vulnerable copy operation is in a different wildCopy call.

Heap buffer overflow in Clickhouse's LZ4 compression codec when parsing a malicious query. There is no verification that the copy operations in the LZ4::decompressImpl loop and especially the arbitrary copy operation wildCopy<copy_amount>(op, ip, copy_end), don’t exceed the destination buffer’s limits.

cPanel before 62.0.17 allows demo accounts to execute code via an NVData_fetchinc API call (SEC-233).

In cPanel before 62.0.4, Exim piped filters ran in the context of an incorrect user account when delivering to a system user (SEC-204).

The Key Management feature in the SecureSphere Operations Manager (SOM) Management Server in Imperva SecureSphere 9.0.0.5 allows remote authenticated users to upload executable files via the (1) private_key or (2) public_key parameter in a T/keyManagement request to plain/settings.html, as demonstrated by uploading a Linux ELF file and a shell script.

The (1) file upload component and (2) File Abstraction Layer (FAL) in TYPO3 6.0.x before 6.0.8 and 6.1.x before 6.1.3 do not properly check file extensions, which allow remote authenticated editors to execute arbitrary PHP code by uploading a .php file.

cPanel before 64.0.21 allows file-read and file-write operations for demo accounts via the SourceIPCheck API (SEC-250).

A vulnerability classified as critical was found in Tenda i21 1.0.0.14(4656). This vulnerability affects the function formGetDiagnoseInfo. The manipulation of the argument cmdinput leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-263080. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

plain/actionsets.html in the SecureSphere Operations Manager (SOM) Management Server in Imperva SecureSphere 9.0.0.5 allows remote authenticated users to execute arbitrary commands via a task with a [command].value field in conjunction with an [arguments].value field.

cPanel before 64.0.21 allows demo accounts to execute code via an ImageManager_dimensions API call (SEC-243).

A vulnerability was found in Tenda W15E 15.11.0.14. It has been classified as critical. Affected is the function guestWifiRuleRefresh. The manipulation of the argument qosGuestDownstream leads to stack-based buffer overflow. It is possible to launch the attack remotely. VDB-261870 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Multiple exploitable buffer overflow vulnerabilities exist in the PubNub message handler for the "cc" channel of Insteon Hub running firmware version 1012. Specially crafted commands sent through the PubNub service can cause a stack-based buffer overflow overwriting arbitrary data. An attacker should send an authenticated HTTP request to trigger this vulnerability. In cmd g_b, at 0x9d015714, the value for the `grp` key is copied using `strcpy` to the buffer at `$sp+0x280`.This buffer is 16 bytes large, sending anything longer will cause a buffer overflow.

A vulnerability, which was classified as critical, was found in Tenda W15E 15.11.0.14. Affected is the function formAddDnsForward of the file /goform/AddDnsForward. The manipulation of the argument DnsForwardRule leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-261858 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Multiple heap-based buffer overflow vulnerabilities in some web API controllers of FortiWeb 6.4.1, 6.4.0, and 6.3.0 through 6.3.15 may allow a remote authenticated attacker to execute arbitrary code or commands via specifically crafted HTTP requests.

A vulnerability was found in Tenda i21 1.0.0.14(4656). It has been classified as critical. This affects the function formWifiMacFilterSet. The manipulation of the argument ssidIndex leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-263085 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Improper input validation vulnerability in SYNOPHOTO_Flickr_MultiUpload in Synology Photo Station before 6.8.3-3463 and before 6.3-2971 allows remote authenticated users to execute arbitrary codes via the prog_id parameter.

VMware Workstation (15.x before 15.5.1) and Fusion (11.x before 11.5.1) contain an out-of-bounds write vulnerability in the e1000e virtual network adapter. Successful exploitation of this issue may lead to code execution on the host from the guest or may allow attackers to create a denial-of-service condition on their own VM.

A vulnerability was found in Tenda i21 1.0.0.14(4656) and classified as critical. Affected by this issue is the function formWifiMacFilterGet. The manipulation of the argument index leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-263084. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The Cacti component in GroundWork Monitor Enterprise 6.7.0 does not properly perform authorization checks, which allows remote authenticated users to read or modify configuration settings via unspecified vectors, as demonstrated by reading credentials.

A vulnerability was found in Tenda i21 1.0.0.14(4656). It has been declared as critical. This vulnerability affects the function formexeCommand. The manipulation of the argument cmdinput leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-263086 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Tenda i21 1.0.0.14(4656). Affected is the function formSetAutoPing. The manipulation of the argument ping1/ping2 leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-263082 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

OpenText Documentum Content Server (formerly EMC Documentum Content Server) through 7.3 does not properly validate the input of the PUT_FILE RPC-command, which allows any authenticated user to hijack an arbitrary file from the Content Server filesystem; because some files on the Content Server filesystem are security-sensitive, this leads to privilege escalation.

A vulnerability has been found in Tenda i21 1.0.0.14(4656) and classified as critical. Affected by this vulnerability is the function formSetUplinkInfo of the file /goform/setUplinkInfo. The manipulation of the argument pingHostIp2 leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-263083. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The users controller in Katello 1.5.0-14 and earlier, and Red Hat Satellite, does not check authorization for the update_roles action, which allows remote authenticated users to gain privileges by setting a user account to an administrator account.

Windows Routing and Remote Access Service (RRAS) Remote Code Execution Vulnerability

core/get_menudiv.php in Dolibarr before 11.0.4 allows remote authenticated attackers to bypass intended access restrictions via a non-alphanumeric menu parameter.

IBM Maximo Asset Management 7.1, 7.5, and 7.6 could allow a remote attacker to hijack a user's session, caused by the failure to invalidate an existing session identifier. An attacker could exploit this vulnerability to gain access to another user's session. IBM X-Force ID: 120253.

MySQL before 5.0.25 and 5.1 before 5.1.12 evaluates arguments of suid routines in the security context of the routine's definer instead of the routine's caller, which allows remote authenticated users to gain privileges through a routine that has been made available using GRANT EXECUTE.

Windows Routing and Remote Access Service (RRAS) Remote Code Execution Vulnerability

Windows Remote Desktop Licensing Service Spoofing Vulnerability

REDCap before 4.14.0 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the logic of a custom rule.

Windows Routing and Remote Access Service (RRAS) Remote Code Execution Vulnerability

In Open Ticket Request System (OTRS) 3.3.x before 3.3.18, 4.x before 4.0.25, and 5.x before 5.0.23, remote authenticated users can leverage statistics-write permissions to gain privileges via code injection.

A vulnerability was found in Tenda A301 15.13.08.12_multi_TDE01. It has been rated as critical. This issue affects the function formAddMacfilterRule of the file /goform/setBlackRule. The manipulation of the argument deviceList leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-262223. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to a stack buffer overflow via crafted HTTP POST request sent by a remote, authenticated attacker to /GponForm/usb_Form?script/. An attacker can leverage this vulnerability to potentially execute arbitrary code.

OSSP shiela 1.1.5 and earlier allows remote authenticated users to execute arbitrary commands on the CVS server via shell metacharacters in a filename that is committed.

Incomplete blacklist vulnerability in lib/filesystem.php in ownCloud before 4.0.9 and 4.5.x before 4.5.2 allows remote authenticated users to execute arbitrary PHP code by uploading a file with a special crafted name.

Certain NETGEAR devices are affected by out-of-bounds reads and writes. This affects R6400 before 1.0.1.70, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, and XR300 before 1.0.3.50.

A vulnerability classified as critical was found in Tenda W9 1.0.0.7(4456). Affected by this vulnerability is the function fromDhcpSetSer of the file /goform/DhcpSetSer. The manipulation of the argument dhcpStartIp/dhcpEndIp/dhcpGw/dhcpMask/dhcpLeaseTime/dhcpDns1/dhcpDns2 leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-262135. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda AX1806 1.0.0.1 and classified as critical. Affected by this issue is the function formSetRebootTimer of the file /goform/SetRebootTimer. The manipulation of the argument rebootTime leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-262130 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

NETGEAR R6400 devices before 1.0.1.70 are affected by a stack-based buffer overflow by an authenticated user.

A vulnerability has been found in Tenda AX1806 1.0.0.1 and classified as critical. Affected by this vulnerability is the function formSetDeviceName of the file /goform/SetOnlineDevName. The manipulation of the argument devName leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-262129 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.