Frontier is Substrate's Ethereum compatibility layer. Prior to commit aea528198b3b226e0d20cce878551fd4c0e3d5d0, at the end of a contract execution, when opcode SUICIDE marks a contract to be deleted, the software uses `storage::remove_prefix` (now renamed to `storage::clear_prefix`) to remove all storages associated with it. This is a single IO primitive call passing the WebAssembly boundary. For large contracts, the call (without providing a `limit` parameter) can be slow. In addition, for parachains, all storages to be deleted will be part of the PoV, which easily exceed relay chain PoV size limit. On the other hand, Frontier's maintainers only charge a fixed cost for opcode SUICIDE. The maintainers consider the severity of this issue high, because an attacker can craft a contract with a lot of storage values on a parachain, and then call opcode SUICIDE on the contract. If the transaction makes into a parachain block, the parachain will then stall because the PoV size will exceed relay chain's limit. This is especially an issue for XCM transactions, because they can't be skipped. Commit aea528198b3b226e0d20cce878551fd4c0e3d5d0 contains a patch for this issue. For parachains, it's recommended to issue an emergency runtime upgrade as soon as possible. For standalone chains, the impact is less severe because the issue mainly affects PoV sizes. It's recommended to issue a normal runtime upgrade as soon as possible. There are no known workarounds.

Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to version 1.6.5, Authlib’s JOSE implementation accepts unbounded JWS/JWT header and signature segments. A remote attacker can craft a token whose base64url‑encoded header or signature spans hundreds of megabytes. During verification, Authlib decodes and parses the full input before it is rejected, driving CPU and memory consumption to hostile levels and enabling denial of service. Version 1.6.5 patches the issue. Some temporary workarounds are available. Enforce input size limits before handing tokens to Authlib and/or use application-level throttling to reduce amplification risk.

A memory allocation issue in vernemq v2.0.1 allows attackers to cause a Denial of Service (DoS) via excessive memory consumption.

An issue was discovered in the Wikibase extension for MediaWiki before 1.35.12, 1.36.x through 1.39.x before 1.39.5, and 1.40.x before 1.40.1. There is no rate limit for merging items.

XMedia Recode 3.4.8.6 contains a denial of service vulnerability that allows attackers to crash the application by loading a specially crafted .m3u playlist file. Attackers can create a malicious .m3u file with an oversized buffer to trigger an application crash when the file is opened.

A denial-of-service vulnerability caused by unbounded resource allocation was discovered in the audit logging functionality, due to a missing size limit on input recorded into audit entries. An unauthenticated attacker can submit requests containing excessively large input that is recorded into audit entries, possibly exhausting the available disk space and rendering the system inoperable.

LengthPrefixedMessageReader in gRPC Swift 1.1.0 and earlier allocates buffers of arbitrary length, which allows remote attackers to cause uncontrolled resource consumption and deny service.

An Allocation of Resources Without Limits or Throttling vulnerability in Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause Denial of Service (DoS). On all Junos OS QFX5000 Series and EX4000 Series platforms, when a high number of VLANs are configured, a specific DHCP packet will cause PFE hogging which will lead to dropping of socket connections. This issue affects: Juniper Networks Junos OS on QFX5000 Series and EX4000 Series * 21.1 versions prior to 21.1R3-S5; * 21.2 versions prior to 21.2R3-S5; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S4; * 22.1 versions prior to 22.1R3-S3; * 22.2 versions prior to 22.2R3-S1; * 22.3 versions prior to 22.3R2-S2, 22.3R3; * 22.4 versions prior to 22.4R2. This issue does not affect Juniper Networks Junos OS versions prior to 21.1R1

An issue was discovered in Pillow before 10.0.0. It is a Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textlength in an ImageDraw instance operates on a long text argument.

A Denial-of-Service (DoS) vulnerability was discovered in Team Server in HelpSystems Cobalt Strike 4.2 and 4.3. It allows remote attackers to crash the C2 server thread and block beacons' communication with it.

The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. Instances of the Apollo Router running versions >=1.21.0 and < 1.52.1 are impacted by a denial of service vulnerability if _all_ of the following are true: 1. The Apollo Router has been configured to support [External Coprocessing](https://www.apollographql.com/docs/router/customizations/coprocessor). 2. The Apollo Router has been configured to send request bodies to coprocessors. This is a non-default configuration and must be configured intentionally by administrators. Instances of the Apollo Router running versions >=1.7.0 and <1.52.1 are impacted by a denial-of-service vulnerability if all of the following are true: 1. Router has been configured to use a custom-developed Native Rust Plugin. 2. The plugin accesses Request.router_request in the RouterService layer. 3. You are accumulating the body from Request.router_request into memory. If using an impacted configuration, the Router will load entire HTTP request bodies into memory without respect to other HTTP request size-limiting configurations like limits.http_max_request_bytes. This can cause the Router to be out-of-memory (OOM) terminated if a sufficiently large request is sent to the Router. By default, the Router sets limits.http_max_request_bytes to 2 MB. If you have an impacted configuration as defined above, please upgrade to at least Apollo Router 1.52.1. If you cannot upgrade, you can mitigate the denial-of-service opportunity impacting External Coprocessors by setting the coprocessor.router.request.body configuration option to false. Please note that changing this configuration option will change the information sent to any coprocessors you have configured and may impact functionality implemented by those coprocessors. If you have developed a Native Rust Plugin and cannot upgrade, you can update your plugin to either not accumulate the request body or enforce a maximum body size limit. You can also mitigate this issue by limiting HTTP body payload sizes prior to the Router (e.g., in a proxy or web application firewall appliance).

Centova Cast 3.2.12 contains a denial of service vulnerability that allows attackers to overwhelm the system by repeatedly calling the database export API endpoint. Attackers can trigger 100% CPU load by sending multiple concurrent requests to the /api.php endpoint with crafted parameters.

flatted is a circular JSON parser. Prior to 3.4.0, flatted's parse() function uses a recursive revive() phase to resolve circular references in deserialized JSON. When given a crafted payload with deeply nested or self-referential $ indices, the recursion depth is unbounded, causing a stack overflow that crashes the Node.js process. This vulnerability is fixed in 3.4.0.

snappy-java is a Java port of the snappy, a fast C++ compresser/decompresser developed by Google. The SnappyInputStream was found to be vulnerable to Denial of Service (DoS) attacks when decompressing data with a too large chunk size. Due to missing upper bound check on chunk length, an unrecoverable fatal error can occur. All versions of snappy-java including the latest released version 1.1.10.3 are vulnerable to this issue. A fix has been introduced in commit `9f8c3cf74` which will be included in the 1.1.10.4 release. Users are advised to upgrade. Users unable to upgrade should only accept compressed data from trusted sources.

When reading a specially crafted 7Z archive, Compress can be made to allocate large amounts of memory that finally leads to an out of memory error even for very small inputs. This could be used to mount a denial of service attack against services that use Compress' sevenz package.

An allocation of resources without limits or throttling in Elasticsearch can lead to an OutOfMemoryError exception resulting in a crash via a specially crafted query using an SQL function.

A memory allocation with excessive size value vulnerability in the license verification function of FortiPortal before 6.0.6 may allow an attacker to perform a denial of service attack via specially crafted license blobs.

Improper memory allocation during counter check DLM handling can lead to denial of service in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Industrial IOT, Snapdragon Mobile

An issue was discovered in Couchbase Server 6.6.x through 7.2.0, before 7.1.5 and 7.2.1. Unauthenticated users may cause memcached to run out of memory via large commands.

BIND servers that are configured to use TKEY-based authentication via GSS-API tokens are vulnerable to excessive memory consumption when receiving and processing maliciously-constructed packets. Typically these servers will be found in Active Directory integrated DNS deployments and/or Kerberos-secured DNS environments. This issue affects BIND 9 versions 9.0.0 through 9.16.50, 9.18.0 through 9.18.48, 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, 9.9.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1.

Multiple vulnerabilities in the Cisco ATA 190 Series Analog Telephone Adapter Software could allow an attacker to perform a command injection attack resulting in remote code execution or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

In BIP-IP versions 17.0.x before 17.0.0.2, 16.1.x before 16.1.3.3, 15.1.x before 15.1.8.1, 14.1.x before 14.1.5.3, and all versions of 13.1.x, when OCSP authentication profile is configured on a virtual server, undisclosed requests can cause an increase in CPU resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

An adversary could cause a continuous restart loop to the entire device by sending a large quantity of HTTP GET requests if the controller has the built-in web server enabled but does not have the built-in web server completely set up and configured for the SNAP PAC S1 Firmware version R10.3b

The Zone Controller service in the Zoom On-Premise Meeting Connector Controller before version 4.6.358.20210205 does not verify the cnt field sent in incoming network packets, which leads to exhaustion of resources and system crash.

In WAGO I/O-Check Service in multiple products an unauthenticated remote attacker can send a specially crafted packet containing OS commands to provoke a denial of service.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.10, FreeSWITCH allows authorized users to cause a denial of service attack by sending re-INVITE with SDP containing duplicate codec names. When a call in FreeSWITCH completes codec negotiation, the `codec_string` channel variable is set with the result of the negotiation. On a subsequent re-negotiation, if an SDP is offered that contains codecs with the same names but with different formats, there may be too many codec matches detected by FreeSWITCH leading to overflows of its internal arrays. By abusing this vulnerability, an attacker is able to corrupt stack of FreeSWITCH leading to an undefined behavior of the system or simply crash it. Version 1.10.10 contains a patch for this issue.

A vulnerability in the email scanning algorithm of Cisco AsyncOS software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to perform a denial of service (DoS) attack against an affected device. This vulnerability is due to insufficient input validation of incoming emails. An attacker could exploit this vulnerability by sending a crafted email through Cisco ESA. A successful exploit could allow the attacker to exhaust all the available CPU resources on an affected device for an extended period of time, preventing other emails from being processed and resulting in a DoS condition.

IBM TXSeries for Multiplatforms 10.1 is vulnerable to a denial of service, caused by improper enforcement of the timeout on individual read operations. By conducting a slowloris-type attacks, a remote attacker could exploit this vulnerability to cause a denial of service.

Octobox is software for managing GitHub notifications. Prior to pull request (PR) 2807, a user of the system can provide a specifically crafted search query string that will trigger a ReDoS vulnerability. This issue is fixed in PR 2807.

go-libp2p is the Go implementation of the libp2p Networking Stack. Prior to versions 0.27.8, 0.28.2, and 0.29.1 malicious peer can use large RSA keys to run a resource exhaustion attack & force a node to spend time doing signature verification of the large key. This vulnerability is present in the core/crypto module of go-libp2p and can occur during the Noise handshake and the libp2p x509 extension verification step. To prevent this attack, go-libp2p versions 0.27.8, 0.28.2, and 0.29.1 restrict RSA keys to <= 8192 bits. To protect one's application, it is necessary to update to these patch releases and to use the updated Go compiler in 1.20.7 or 1.19.12. There are no known workarounds for this issue.

An issue has been discovered in GitLab EE affecting all versions from 15.11 prior to 16.2.2 which allows an attacker to spike the resource consumption resulting in DoS.

QUIC connections do not set an upper bound on the amount of data buffered when reading post-handshake messages, allowing a malicious QUIC connection to cause unbounded memory growth. With fix, connections now consistently reject messages larger than 65KiB in size.

An excessive memory use issue (CWE-770) exists in Email-MIME, before version 1.954, which can cause denial of service when parsing multipart MIME messages. The patch set (from 2020 and 2024) limits excessive depth and the total number of parts.

On Crestron 3-Series Control Systems before 1.8001.0187, crafting and sending a specific BACnet packet can cause a crash.

An issue was discovered in Mattermost Server before 5.18.0. It allows attackers to cause a denial of service (memory consumption) via a large Slack import.

Discourse is an open source discussion platform. Prior to version 3.0.6 of the `stable` branch and version 3.1.0.beta7 of the `beta` and `tests-passed` branches, in multiple controller actions, Discourse accepts limit params but does not impose any upper bound on the values being accepted. Without an upper bound, the software may allow arbitrary users to generate DB queries which may end up exhausting the resources on the server. The issue is patched in version 3.0.6 of the `stable` branch and version 3.1.0.beta7 of the `beta` and `tests-passed` branches. There are no known workarounds for this vulnerability.

A vulnerability has been identified in RUGGEDCOM i800, RUGGEDCOM i800NC, RUGGEDCOM i801, RUGGEDCOM i801NC, RUGGEDCOM i802, RUGGEDCOM i802NC, RUGGEDCOM i803, RUGGEDCOM i803NC, RUGGEDCOM M2100, RUGGEDCOM M2100F, RUGGEDCOM M2100NC, RUGGEDCOM M2200, RUGGEDCOM M2200F, RUGGEDCOM M2200NC, RUGGEDCOM M969, RUGGEDCOM M969F, RUGGEDCOM M969NC, RUGGEDCOM RMC30, RUGGEDCOM RMC30NC, RUGGEDCOM RMC8388 V4.X, RUGGEDCOM RMC8388 V5.X, RUGGEDCOM RMC8388NC V4.X, RUGGEDCOM RMC8388NC V5.X, RUGGEDCOM RP110, RUGGEDCOM RP110NC, RUGGEDCOM RS1600, RUGGEDCOM RS1600F, RUGGEDCOM RS1600FNC, RUGGEDCOM RS1600NC, RUGGEDCOM RS1600T, RUGGEDCOM RS1600TNC, RUGGEDCOM RS400, RUGGEDCOM RS400F, RUGGEDCOM RS400NC, RUGGEDCOM RS401, RUGGEDCOM RS401NC, RUGGEDCOM RS416, RUGGEDCOM RS416F, RUGGEDCOM RS416NC, RUGGEDCOM RS416NCv2 V4.X, RUGGEDCOM RS416NCv2 V5.X, RUGGEDCOM RS416P, RUGGEDCOM RS416PF, RUGGEDCOM RS416PNC, RUGGEDCOM RS416PNCv2 V4.X, RUGGEDCOM RS416PNCv2 V5.X, RUGGEDCOM RS416Pv2 V4.X, RUGGEDCOM RS416Pv2 V5.X, RUGGEDCOM RS416v2 V4.X, RUGGEDCOM RS416v2 V5.X, RUGGEDCOM RS8000, RUGGEDCOM RS8000A, RUGGEDCOM RS8000ANC, RUGGEDCOM RS8000H, RUGGEDCOM RS8000HNC, RUGGEDCOM RS8000NC, RUGGEDCOM RS8000T, RUGGEDCOM RS8000TNC, RUGGEDCOM RS900, RUGGEDCOM RS900 (32M) V4.X, RUGGEDCOM RS900 (32M) V5.X, RUGGEDCOM RS900F, RUGGEDCOM RS900G, RUGGEDCOM RS900G (32M) V4.X, RUGGEDCOM RS900G (32M) V5.X, RUGGEDCOM RS900GF, RUGGEDCOM RS900GNC, RUGGEDCOM RS900GNC(32M) V4.X, RUGGEDCOM RS900GNC(32M) V5.X, RUGGEDCOM RS900GP, RUGGEDCOM RS900GPF, RUGGEDCOM RS900GPNC, RUGGEDCOM RS900L, RUGGEDCOM RS900LNC, RUGGEDCOM RS900M-GETS-C01, RUGGEDCOM RS900M-GETS-XX, RUGGEDCOM RS900M-STND-C01, RUGGEDCOM RS900M-STND-XX, RUGGEDCOM RS900MNC-GETS-C01, RUGGEDCOM RS900MNC-GETS-XX, RUGGEDCOM RS900MNC-STND-XX, RUGGEDCOM RS900MNC-STND-XX-C01, RUGGEDCOM RS900NC, RUGGEDCOM RS900NC(32M) V4.X, RUGGEDCOM RS900NC(32M) V5.X, RUGGEDCOM RS900W, RUGGEDCOM RS910, RUGGEDCOM RS910L, RUGGEDCOM RS910LNC, RUGGEDCOM RS910NC, RUGGEDCOM RS910W, RUGGEDCOM RS920L, RUGGEDCOM RS920LNC, RUGGEDCOM RS920W, RUGGEDCOM RS930L, RUGGEDCOM RS930LNC, RUGGEDCOM RS930W, RUGGEDCOM RS940G, RUGGEDCOM RS940GF, RUGGEDCOM RS940GNC, RUGGEDCOM RS969, RUGGEDCOM RS969NC, RUGGEDCOM RSG2100, RUGGEDCOM RSG2100 (32M) V4.X, RUGGEDCOM RSG2100 (32M) V5.X, RUGGEDCOM RSG2100F, RUGGEDCOM RSG2100NC, RUGGEDCOM RSG2100NC(32M) V4.X, RUGGEDCOM RSG2100NC(32M) V5.X, RUGGEDCOM RSG2100P, RUGGEDCOM RSG2100P (32M) V4.X, RUGGEDCOM RSG2100P (32M) V5.X, RUGGEDCOM RSG2100PF, RUGGEDCOM RSG2100PNC, RUGGEDCOM RSG2100PNC (32M) V4.X, RUGGEDCOM RSG2100PNC (32M) V5.X, RUGGEDCOM RSG2200, RUGGEDCOM RSG2200F, RUGGEDCOM RSG2200NC, RUGGEDCOM RSG2288 V4.X, RUGGEDCOM RSG2288 V5.X, RUGGEDCOM RSG2288NC V4.X, RUGGEDCOM RSG2288NC V5.X, RUGGEDCOM RSG2300 V4.X, RUGGEDCOM RSG2300 V5.X, RUGGEDCOM RSG2300F, RUGGEDCOM RSG2300NC V4.X, RUGGEDCOM RSG2300NC V5.X, RUGGEDCOM RSG2300P V4.X, RUGGEDCOM RSG2300P V5.X, RUGGEDCOM RSG2300PF, RUGGEDCOM RSG2300PNC V4.X, RUGGEDCOM RSG2300PNC V5.X, RUGGEDCOM RSG2488 V4.X, RUGGEDCOM RSG2488 V5.X, RUGGEDCOM RSG2488F, RUGGEDCOM RSG2488NC V4.X, RUGGEDCOM RSG2488NC V5.X, RUGGEDCOM RSG907R, RUGGEDCOM RSG908C, RUGGEDCOM RSG909R, RUGGEDCOM RSG910C, RUGGEDCOM RSG920P V4.X, RUGGEDCOM RSG920P V5.X, RUGGEDCOM RSG920PNC V4.X, RUGGEDCOM RSG920PNC V5.X, RUGGEDCOM RSL910, RUGGEDCOM RSL910NC, RUGGEDCOM RST2228, RUGGEDCOM RST2228P, RUGGEDCOM RST916C, RUGGEDCOM RST916P. The web server of the affected devices contains a vulnerability that may lead to a denial of service condition. An attacker may cause total loss of availability of the web server, which might recover after the attack is over.

VerneMQ MQTT Broker versions prior to 1.12.0 are vulnerable to a denial of service attack as a result of excessive memory consumption due to the handling of untrusted inputs. These inputs cause the message broker to consume large amounts of memory, resulting in the application being terminated by the operating system.

An issue was discovered in Foxit Reader and PhantomPDF before 9.7. It allows memory consumption because data is created for each page of an application level.

EMQ X Broker versions prior to 4.2.8 are vulnerable to a denial of service attack as a result of excessive memory consumption due to the handling of untrusted inputs. These inputs cause the message broker to consume large amounts of memory, resulting in the application being terminated by the operating system.

An issue in the time_t_to_dt component of openlink virtuoso-opensource v7.2.11 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements.

A vulnerability has been found in Dahua products.Attackers can send carefully crafted data packets to the interface with vulnerabilities, causing the device to crash.

An issue was discovered in Mattermost Server before 5.8.0, 5.7.2, 5.6.5, and 4.10.7. It allows attackers to cause a denial of service (memory consumption) via OpenGraph.

Redis is an open source, in-memory database that persists on disk. When parsing an incoming Redis Standard Protocol (RESP) request, Redis allocates memory according to user-specified values which determine the number of elements (in the multi-bulk header) and size of each element (in the bulk header). An attacker delivering specially crafted requests over multiple connections can cause the server to allocate significant amount of memory. Because the same parsing mechanism is used to handle authentication requests, this vulnerability can also be exploited by unauthenticated users. The problem is fixed in Redis versions 6.2.6, 6.0.16 and 5.0.14. An additional workaround to mitigate this problem without patching the redis-server executable is to block access to prevent unauthenticated users from connecting to Redis. This can be done in different ways: Using network access control tools like firewalls, iptables, security groups, etc. or Enabling TLS and requiring users to authenticate using client side certificates.

Allocation of Resources Without Limits or Throttling vulnerability in Apache Tomcat. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M20, from 10.1.0-M1 through 10.1.24, from 9.0.13 through 9.0.89. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.35 through 8.5.100 and 7.0.92 through 7.0.109. Other EOL versions may also be affected. Users are recommended to upgrade to version 11.0.0-M21, 10.1.25, or 9.0.90, which fixes the issue. Apache Tomcat, under certain configurations on any platform, allows an attacker to cause an OutOfMemoryError by abusing the TLS handshake process.

When curl retrieves an HTTP response, it stores the incoming headers so that they can be accessed later via the libcurl headers API. However, curl did not have a limit in how many or how large headers it would accept in a response, allowing a malicious server to stream an endless series of headers and eventually cause curl to run out of heap memory.