VMware Workstation (15.x before 15.5.1) and Fusion (11.x before 11.5.1) contain an out-of-bounds write vulnerability in the e1000e virtual network adapter. Successful exploitation of this issue may lead to code execution on the host from the guest or may allow attackers to create a denial-of-service condition on their own VM.

The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to a stack buffer overflow via crafted HTTP POST request sent by a remote, authenticated attacker to /GponForm/usb_Form?script/. An attacker can leverage this vulnerability to potentially execute arbitrary code.

protobuf allows remote authenticated attackers to cause a heap-based buffer overflow.

An exploitable remote code execution vulnerability exists in the iw_webs configuration parsing functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted user name entry can cause an overflow of an error message buffer, resulting in remote code execution. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects D6100 before 1.0.0.60, D3600 before 1.0.0.75, D6000 before 1.0.0.75, R9000 before 1.0.4.26, R8900 before 1.0.4.26, R7800 before 1.0.2.52, WNDR4500v3 before 1.0.0.58, WNDR4300v2 before 1.0.0.58, WNDR4300 before 1.0.2.104, WNDR3700v4 before 1.0.2.102, and WNR2000v5 before 1.0.0.66.

An issue was discovered in Selesta Visual Access Manager (VAM) 4.15.0 through 4.29. A user with valid credentials is able to create and write XML files on the filesystem via /common/vam_editXml.php in the web interface. The vulnerable PHP page checks none of these: the parameter that identifies the file name to be created, the destination path, or the extension. Thus, an attacker can manipulate the file name to create any type of file within the filesystem with arbitrary content.

A vulnerability has been identified in SPPA-T3000 Application Server (All versions < Service Pack R8.2 SP2). An attacker with valid authentication at the RMI interface could be able to gain remote code execution through an unsecured file upload. Please note that an attacker needs to have access to the Application Highway in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

TigerVNC version prior to 1.10.1 is vulnerable to heap buffer overflow. Vulnerability could be triggered from CopyRectDecoder due to incorrect value checks. Exploitation of this vulnerability could potentially result into remote code execution. This attack appear to be exploitable via network connectivity.

TigerVNC version prior to 1.10.1 is vulnerable to heap buffer overflow, which could be triggered from DecodeManager::decodeRect. Vulnerability occurs due to the signdness error in processing MemOutStream. Exploitation of this vulnerability could potentially result into remote code execution. This attack appear to be exploitable via network connectivity.

TigerVNC version prior to 1.10.1 is vulnerable to heap buffer overflow, which occurs in TightDecoder::FilterGradient. Exploitation of this vulnerability could potentially result into remote code execution. This attack appear to be exploitable via network connectivity.

Memory corruption in PAN-OS 8.1.9 and earlier, and PAN-OS 9.0.3 and earlier will allow an administrative user to cause arbitrary memory corruption by rekeying the current client interactive session.

TigerVNC version prior to 1.10.1 is vulnerable to stack buffer overflow, which could be triggered from CMsgReader::readSetCursor. This vulnerability occurs due to insufficient sanitization of PixelFormat. Since remote attacker can choose offset from start of the buffer to start writing his values, exploitation of this vulnerability could potentially result into remote code execution. This attack appear to be exploitable via network connectivity.

TRENDnet TEW-827DRU with firmware up to and including 2.04B03 contains a stack-based buffer overflow while returning an error message to the user about failure to resolve a hostname during a ping or traceroute attempt. This allows an authenticated user to execute arbitrary code. The exploit can be exercised on the local intranet or remotely if remote administration is enabled.

In WebAccess versions 8.4.1 and prior, multiple stack-based buffer overflow vulnerabilities are caused by a lack of proper validation of the length of user-supplied data. Exploitation of these vulnerabilities may allow remote code execution.

ip_reass in ip_input.c in libslirp 4.0.0 has a heap-based buffer overflow via a large packet because it mishandles a case involving the first fragment.

A vulnerability was found in Linksys WRT54G 4.21.5. It has been rated as critical. Affected by this issue is the function validate_services_port of the file /apply.cgi of the component POST Parameter Handler. The manipulation of the argument services_array leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

In Pulse Secure Pulse Connect Secure version 9.0RX before 9.0R3.4, 8.3RX before 8.3R7.1, 8.2RX before 8.2R12.1, and 8.1RX before 8.1R15.1 and Pulse Policy Secure version 9.0RX before 9.0R3.2, 5.4RX before 5.4R7.1, 5.3RX before 5.3R12.1, 5.2RX before 5.2R12.1, and 5.1RX before 5.1R15.1, an authenticated attacker (via the admin web interface) can send a specially crafted message resulting in a stack buffer overflow.

The D-Link DCS series of Wi-Fi cameras contains a stack-based buffer overflow in alphapd, the camera's web server. The overflow allows a remotely authenticated attacker to execute arbitrary code by providing a long string in the WEPEncryption parameter when requesting wireless.htm. Vulnerable devices include DCS-5009L (1.08.11 and below), DCS-5010L (1.14.09 and below), DCS-5020L (1.15.12 and below), DCS-5025L (1.03.07 and below), DCS-5030L (1.04.10 and below), DCS-930L (2.16.01 and below), DCS-931L (1.14.11 and below), DCS-932L (2.17.01 and below), DCS-933L (1.14.11 and below), and DCS-934L (1.05.04 and below).

An API abuse vulnerability exists in the AT command API of ALEOS before 4.13.0, 4.9.5, 4.4.9 due to lack of length checking when handling certain user-provided values.

In Emerson Ovation OCR400 Controller 3.3.1 and earlier, a stack-based buffer overflow vulnerability in the embedded third-party FTP server involves improper handling of a long file name from the LIST command to the FTP service, which may cause the service to overwrite buffers, leading to remote code execution and escalation of privileges.

A heap-buffer overflow vulnerability was found in the Redis hyperloglog data structure versions 3.x before 3.2.13, 4.x before 4.0.14 and 5.x before 5.0.4. By carefully corrupting a hyperloglog using the SETRANGE command, an attacker could trick Redis interpretation of dense HLL encoding to write up to 3 bytes beyond the end of a heap-allocated buffer.

wasmtime is a fast and secure runtime for WebAssembly. In affected versions wasmtime's code generator, Cranelift, has a bug on x86_64 targets where address-mode computation mistakenly would calculate a 35-bit effective address instead of WebAssembly's defined 33-bit effective address. This bug means that, with default codegen settings, a wasm-controlled load/store operation could read/write addresses up to 35 bits away from the base of linear memory. Due to this bug, however, addresses up to `0xffffffff * 8 + 0x7ffffffc = 36507222004 = ~34G` bytes away from the base of linear memory are possible from guest code. This means that the virtual memory 6G away from the base of linear memory up to ~34G away can be read/written by a malicious module. A guest module can, without the knowledge of the embedder, read/write memory in this region. The memory may belong to other WebAssembly instances when using the pooling allocator, for example. Affected embedders are recommended to analyze preexisting wasm modules to see if they're affected by the incorrect codegen rules and possibly correlate that with an anomalous number of traps during historical execution to locate possibly suspicious modules. The specific bug in Cranelift's x86_64 backend is that a WebAssembly address which is left-shifted by a constant amount from 1 to 3 will get folded into x86_64's addressing modes which perform shifts. For example `(i32.load (i32.shl (local.get 0) (i32.const 3)))` loads from the WebAssembly address `$local0 << 3`. When translated to Cranelift the `$local0 << 3` computation, a 32-bit value, is zero-extended to a 64-bit value and then added to the base address of linear memory. Cranelift would generate an instruction of the form `movl (%base, %local0, 8), %dst` which calculates `%base + %local0 << 3`. The bug here, however, is that the address computation happens with 64-bit values, where the `$local0 << 3` computation was supposed to be truncated to a a 32-bit value. This means that `%local0`, which can use up to 32-bits for an address, gets 3 extra bits of address space to be accessible via this `movl` instruction. The fix in Cranelift is to remove the erroneous lowering rules in the backend which handle these zero-extended expression. The above example is then translated to `movl %local0, %temp; shl $3, %temp; movl (%base, %temp), %dst` which correctly truncates the intermediate computation of `%local0 << 3` to 32-bits inside the `%temp` register which is then added to the `%base` value. Wasmtime version 4.0.1, 5.0.1, and 6.0.1 have been released and have all been patched to no longer contain the erroneous lowering rules. While updating Wasmtime is recommended, there are a number of possible workarounds that embedders can employ to mitigate this issue if updating is not possible. Note that none of these workarounds are on-by-default and require explicit configuration: 1. The `Config::static_memory_maximum_size(0)` option can be used to force all accesses to linear memory to be explicitly bounds-checked. This will perform a bounds check separately from the address-mode computation which correctly calculates the effective address of a load/store. Note that this can have a large impact on the execution performance of WebAssembly modules. 2. The `Config::static_memory_guard_size(1 << 36)` option can be used to greatly increase the guard pages placed after linear memory. This will guarantee that memory accesses up-to-34G away are guaranteed to be semantically correct by reserving unmapped memory for the instance. Note that this reserves a very large amount of virtual memory per-instances and can greatly reduce the maximum number of concurrent instances being run. 3. If using a non-x86_64 host is possible, then that will also work around this bug. This bug does not affect Wasmtime's or Cranelift's AArch64 backend, for example.

A stack-buffer overflow vulnerability was found in the Redis hyperloglog data structure versions 3.x before 3.2.13, 4.x before 4.0.14 and 5.x before 5.0.4. By corrupting a hyperloglog using the SETRANGE command, an attacker could cause Redis to perform controlled increments of up to 12 bytes past the end of a stack-allocated buffer.

Improper input validation vulnerability in parser_infe and sheifd_find_itemIndexin fuctions of libsimba library prior to SMR Apr-2022 Release 1 allows out of bounds write by privileged attackers.

A vulnerability exists in Schneider Electric's Modicon Quantum in all versions of the communication modules which could allow arbitrary code execution. An FTP command used to upgrade the firmware of the module can be misused to cause a denial of service, or in extreme cases, to load a malicious firmware.

A vulnerability has been identified in SCALANCE X302-7 EEC (230V), SCALANCE X302-7 EEC (230V, coated), SCALANCE X302-7 EEC (24V), SCALANCE X302-7 EEC (24V, coated), SCALANCE X302-7 EEC (2x 230V), SCALANCE X302-7 EEC (2x 230V, coated), SCALANCE X302-7 EEC (2x 24V), SCALANCE X302-7 EEC (2x 24V, coated), SCALANCE X304-2FE, SCALANCE X306-1LD FE, SCALANCE X307-2 EEC (230V), SCALANCE X307-2 EEC (230V, coated), SCALANCE X307-2 EEC (24V), SCALANCE X307-2 EEC (24V, coated), SCALANCE X307-2 EEC (2x 230V), SCALANCE X307-2 EEC (2x 230V, coated), SCALANCE X307-2 EEC (2x 24V), SCALANCE X307-2 EEC (2x 24V, coated), SCALANCE X307-3, SCALANCE X307-3, SCALANCE X307-3LD, SCALANCE X307-3LD, SCALANCE X308-2, SCALANCE X308-2, SCALANCE X308-2LD, SCALANCE X308-2LD, SCALANCE X308-2LH, SCALANCE X308-2LH, SCALANCE X308-2LH+, SCALANCE X308-2LH+, SCALANCE X308-2M, SCALANCE X308-2M, SCALANCE X308-2M PoE, SCALANCE X308-2M PoE, SCALANCE X308-2M TS, SCALANCE X308-2M TS, SCALANCE X310, SCALANCE X310, SCALANCE X310FE, SCALANCE X310FE, SCALANCE X320-1 FE, SCALANCE X320-1-2LD FE, SCALANCE X408-2, SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M TS (24V), SCALANCE XR324-12M TS (24V), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M PoE (230V, ports on front), SCALANCE XR324-4M PoE (230V, ports on rear), SCALANCE XR324-4M PoE (24V, ports on front), SCALANCE XR324-4M PoE (24V, ports on rear), SCALANCE XR324-4M PoE TS (24V, ports on front), SIPLUS NET SCALANCE X308-2. The handling of arguments such as IP addresses in the CLI of affected devices is prone to buffer overflows. This could allow an authenticated remote attacker to execute arbitrary code on the device.

Multiple improper input validation vulnerabilities exists in the libnvram.so nvram_import functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted file can lead to remote code execution. An attacker can send a sequence of requests to trigger this vulnerability.An improper input validation vulnerability exists in the `httpd`'s `user_define_print` function. Controlling the `user_define_timeout` nvram variable can lead to remote code execution.

Stack-based buffer overflow in the ej_update_variables function in router/httpd/web.c on ASUS routers (when using software from https://github.com/RMerl/asuswrt-merlin) allows web authenticated attackers to execute code via a request that updates a setting. In ej_update_variables, the length of the variable action_script is not checked, as long as it includes a "_wan_if" substring.

An exploitable buffer overflow vulnerability exists in the samsungWifiScan handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 - Firmware version 0.20.17. The video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. The strcpy at [8] overflows the destination buffer, which has a size of 40 bytes. An attacker can send an arbitrarily long 'callbackUrl' value in order to exploit this vulnerability.

An exploitable stack-based buffer overflow vulnerability exists in the retrieval of database fields in video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17. The video-core process insecurely extracts the fields from the "clips" table of its SQLite database, leading to a buffer overflow on the stack. An attacker can send a series of HTTP requests to trigger this vulnerability.

An exploitable remote code execution vulnerability exists in the ping and tracert functionality of the TP-Link TL-R600VPN HWv3 FRNv1.3.0 and HWv2 FRNv1.2.3 http server. A specially crafted IP address can cause a stack overflow, resulting in remote code execution. An attacker can send a single authenticated HTTP request to trigger this vulnerability.

An exploitable buffer overflow vulnerability exists in the camera "replace" feature of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17. The video-core process incorrectly extracts the URL field from a user-controlled JSON payload, leading to a buffer overflow on the stack. An attacker can send an HTTP request to trigger this vulnerability.

An exploitable stack-based buffer overflow vulnerability exists in the samsungWifiScan callback notification of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17. The video-core process incorrectly handles the answer received from a smart camera, leading to a buffer overflow on the stack. An attacker can send a series of HTTP requests to trigger this vulnerability.

An exploitable stack-based buffer overflow vulnerability exists in the database 'find-by-cameraId' functionality of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 - Firmware version 0.20.17. The video-core process incorrectly handles existing records inside its SQLite database, leading to a buffer overflow on the stack. An attacker can send an HTTP request to trigger this vulnerability.

On Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17, the video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. An attacker can send an HTTP request to trigger this vulnerability. A strcpy overflows the destination buffer, which has a size of 40 bytes. An attacker can send an arbitrarily long "user" value in order to exploit this vulnerability.

An exploitable buffer overflow vulnerability exists in the camera 'update' feature of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 - Firmware version 0.20.17. The video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. An attacker can send an HTTP request to trigger this vulnerability.

On Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17, the video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. An attacker can send an HTTP request to trigger this vulnerability. The memcpy call overflows the destination buffer, which has a size of 512 bytes. An attacker can send an arbitrarily long "url" value in order to overwrite the saved-PC with 0x42424242.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects D7800 before 1.0.1.28, EX2700 before 1.0.1.32, EX6200v2 before 1.0.1.56, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.3.6, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.52, WN3100RPv2 before 1.0.0.42, WNDR3700v4 before 1.0.2.92, WNDR4300 before 1.0.2.94, WNDR4300v2 before 1.0.0.50, WNDR4500v3 before 1.0.0.50, and WNR2000v5 before 1.0.0.62.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects R6700 before 1.0.1.48, R7500 before 1.0.0.124, R7800 before 1.0.2.58, R8900 before 1.0.4.2, R9000 before 1.0.4.2, WNDR3700v4 before 1.0.2.102, WNDR4300v1 before 1.0.2.104, WNDR4300v2 before 1.0.0.56, WNDR4500v3 before 1.0.0.56, and WNR2000v5-R2000 before 1.0.0.68.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects DGN2200Bv4 before 1.0.0.102, DGN2200v4 before 1.0.0.102, EX3700 before 1.0.0.70, EX3800 before 1.0.0.70, EX6000 before 1.0.0.30, EX6100 before 1.0.2.22, EX6120 before 1.0.0.40, EX6130 before 1.0.0.22, EX6150 before 1.0.0.38, EX6200 before 1.0.3.86, EX7000 before 1.0.0.64, R6300v2 before 1.0.4.22, R6900P before 1.3.0.18, R7000P before 1.3.0.18, R7300DST before 1.0.0.62, R7900P before 1.3.0.10, R8000 before 1.0.4.12, R8000P before 1.3.0.10, WN2500RPv2 before 1.0.1.52, and WNDR3400v3 before 1.0.1.18.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects D6100 before 1.0.0.57, R7500 before 1.0.0.122, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.92, WNDR4300 before 1.0.2.94, WNDR4300v2 before 1.0.0.50, WNDR4500v3 before 1.0.0.50, and WNR2000v5 before 1.0.0.62.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects D6100 before 1.0.0.57, R6100 before 1.0.1.20, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.92, WNDR4300 before 1.0.2.94, WNDR4300v2 before 1.0.0.50, WNDR4500v3 before 1.0.0.50, and WNR2000v5 before 1.0.0.62.

NVIDIA DCGM contains a vulnerability in nvhostengine, where a network user can cause detection of error conditions without action, which may lead to limited code execution, some denial of service, escalation of privileges, and limited impacts to both data confidentiality and integrity.

Tensorflow is an Open Source Machine Learning Framework. The implementation of `SparseCountSparseOutput` is vulnerable to a heap overflow. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range.

The Gluster file system through versions 4.1.4 and 3.12 is vulnerable to a heap-based buffer overflow in the '__server_getspec' function via the 'gf_getspec_req' RPC message. A remote authenticated attacker could exploit this to cause a denial of service or other potential unspecified impact.

UnixAuthenticationService in Apache Ranger 1.2.0 was updated to correctly handle user input to avoid Stack-based buffer overflow. Versions prior to 1.2.0 should be upgraded to 1.2.0

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects R6400 before 1.0.1.70, R7000 before 1.0.11.126, R7900 before 1.0.4.46, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX200 before 1.0.4.120, RS400 before 1.5.1.80, R6400v2 before 1.0.4.118, R7000P before 1.3.3.140, RAX80 before 1.0.4.120, R6700v3 before 1.0.4.118, R6900P before 1.3.3.140, and RAX75 before 1.0.4.120.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects R6400 before 1.0.1.68, R7000 before 1.0.11.116, R6900P before 1.3.3.140, R7000P before 1.3.3.140, R7900 before 1.0.4.38, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, and XR300 before 1.0.3.50.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects R6400v2 before 1.0.4.118, R6700v3 before 1.0.4.118, R6900P before 1.3.3.140, R7000 before 1.0.11.126, R7000P before 1.3.3.140, RAX200 before 1.0.5.126, RAX75 before 1.0.5.126, and RAX80 before 1.0.5.126.

It was found that glusterfs server is vulnerable to multiple stack based buffer overflows due to functions in server-rpc-fopc.c allocating fixed size buffers using 'alloca(3)'. An authenticated attacker could exploit this by mounting a gluster volume and sending a string longer that the fixed buffer size to cause crash or potential code execution.