SAUTER Controls Nova 200–220 Series with firmware version 3.3-006 and prior and BACnetstac version 4.2.1 and prior have only FTP and Telnet available for device management. Any sensitive information communicated through these protocols, such as credentials, is sent in cleartext. An attacker could obtain sensitive information such as user credentials to gain access to the system.

This vulnerability applies to the Micro Air Vehicle Link (MAVLink) protocol and allows a remote attacker to gain access to sensitive information provided it has access to the communication medium. MAVLink is a header-based protocol that does not perform encryption to improve transfer (and reception speed) and efficiency by design. The increasing popularity of the protocol (used accross different autopilots) has led to its use in wired and wireless mediums through insecure communication channels exposing sensitive information to a remote attacker with ability to intercept network traffic.

IBM Watson CP4D Data Stores 4.6.0, 4.6.1, 4.6.2, and 4.6.3 does not encrypt sensitive or critical information before storage or transmission which could allow an attacker to obtain sensitive information. IBM X-Force ID: 248740.

NETSAS Enigma NMS 65.0.0 and prior does not encrypt sensitive data rendered within web pages. It is possible for an attacker to expose unencrypted sensitive data.

A vulnerability was found in ISS BlackICE PC Protection. It has been declared as problematic. Affected by this vulnerability is the component Update Handler which allows cleartext transmission of data. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

The affected ThroughTek P2P products (SDKs using versions before 3.1.5, any versions with nossl tag, device firmware not using AuthKey for IOTC conneciton, firmware using AVAPI module without enabling DTLS mechanism, and firmware using P2PTunnel or RDT module) do not sufficiently protect data transferred between the local device and ThroughTek servers. This can allow an attacker to access sensitive information, such as camera feeds.

Moxa OnCell G3100-HSPA Series version 1.6 Build 17100315 and prior use a proprietary monitoring protocol that does not provide confidentiality, integrity, and authenticity security controls. All information is sent in plain text, and can be intercepted and modified. The protocol is vulnerable to remote unauthenticated disclosure of sensitive information, including the administrator's password. Under certain conditions, it's also possible to retrieve additional information, such as content of HTTP requests to the device, or the previously used password, due to memory leakages.

In JetBrains IntelliJ IDEA before 2022.3.1 the "Validate JSP File" action used the HTTP protocol to download required JAR files.

A CWE-319: Cleartext Transmission of Sensitive Information vulnerability exists in Modicon M580, Modicon M340, Modicon Premium , Modicon Quantum (all firmware versions), which could cause the disclosure of information when transferring applications to the controller using Modbus TCP protocol.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. Sensitive information is sent to the web server in cleartext, which may allow an attacker to discover the credentials if they are able to observe traffic between the web browser and the server.

ONTAP Select Deploy administration utility versions 2.2 through 2.12.1 transmit credentials in plaintext.

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.1-11.5.8, SNMP exposes sensitive configuration objects over insecure transmission channels. This issue is exposed when a passphrase is inserted into various profile types and accessed using SNMPv2.

Moxa IKS-G6824A series Versions 4.5 and prior, EDS-405A series Version 3.8 and prior, EDS-408A series Version 3.8 and prior, and EDS-510A series Version 3.8 and prior use plaintext transmission of sensitive data, which may allow an attacker to capture sensitive data such as an administrative password.

OnCommand Workflow Automation versions prior to 5.0 shipped without certain HTTP Security headers configured which could allow an attacker to obtain sensitive information via unspecified vectors.

A cleartext transmission of sensitive information vulnerability is present in Hickory Smart Ethernet Bridge from Belwith Products, LLC. Captured data reveals that the Hickory Smart Ethernet Bridge device communicates over the network to an MQTT broker without using encryption. This exposed the default username and password used to authenticate to the MQTT broker. This issue affects Hickory Smart Ethernet Bridge, model number H077646. The firmware does not appear to contain versioning information.

A cleartext transmission vulnerability exists in the network communication functionality of WAGO e!Cockpit version 1.5.1.1. An attacker with access to network traffic can easily intercept, interpret, and manipulate data coming from, or destined for e!Cockpit. This includes passwords, configurations, and binaries being transferred to endpoints.

IBM Sterling File Gateway 2.2.0.0 through 6.0.1.0 displays sensitive information in HTTP requests which could be used in further attacks against the system. IBM X-Force ID: 160503.

IBM Security Guardium Data Encryption (GDE) 3.0.0.2 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 171826.

IBM Security Information Queue (ISIQ) 1.0.0, 1.0.1, and 1.0.2 is missing the HTTP Strict Transport Security header. Users can navigate by mistake to the unencrypted version of the web application or accept invalid certificates. This leads to sensitive data being sent unencrypted over the wire. IBM X-Force ID: 158661.

All versions of NetMan 204 could allow an unauthenticated remote attacker to read a file (config.cgi) containing sensitive information, like credentials.

IBM Cognos Analytics Mobile (iOS) 1.1.0 through 1.1.22 could allow malicious actors to obtain sensitive information due to the cleartext transmission of data.

Pivotal Apps Manager Release, versions 665.0.x prior to 665.0.28, versions 666.0.x prior to 666.0.21, versions 667.0.x prior to 667.0.7, contain an invitation service that accepts HTTP. A remote unauthenticated user could listen to network traffic and gain access to the authorization credentials used to make the invitation requests.

LS ELECTRIC XBC-DN32U with operating system version 01.80 transmits sensitive information in cleartext when communicating over its XGT protocol. This could allow an attacker to gain sensitive information such as user credentials.

IBM Guardium Data Protection could allow a remote attacker to obtain sensitive information due to cleartext transmission of sensitive credential information.

The Administration page on Connect Box EuroDOCSIS 3.0 Voice Gateway CH7465LG-NCIP-6.12.18.25-2p6-NOSH devices accepts a cleartext password in a POST request on port 80, as demonstrated by the Password field to the xml/setter.xml URI.

Mattermost fails to redact from audit logs the user password during user creation and the user password hash in other operations if the experimental audit logging configuration was enabled (ExperimentalAuditSettings section in config).

An issue was discovered on Humax Wireless Voice Gateway HGB10R-2 20160817_1855 devices. The attacker can discover admin credentials in the backup file, aka backupsettings.conf.

ELOG 3.1.4-57bea22 and below is affected by an information disclosure vulnerability. A remote unauthenticated attacker can recover a user's password hash by sending a crafted HTTP POST request.

An issue was discovered on Humax Wireless Voice Gateway HGB10R-2 20160817_1855 devices. Admin credentials are sent over cleartext HTTP.

The Last.fm desktop app (Last.fm Scrobbler) through 2.1.39 on macOS makes HTTP requests that include an API key without the use of SSL/TLS. Although there is an Enable SSL option, it is disabled by default, and cleartext requests are made as soon as the app starts.

OnCommand Unified Manager 7-Mode prior to version 5.2.4 shipped without certain HTTP Security headers configured which could allow an attacker to obtain sensitive information via unspecified vectors.

An issue was discovered on Fujitsu Wireless Keyboard Set LX390 GK381 devices. Because of the lack of proper encryption of 2.4 GHz communication, an attacker is able to eavesdrop on sensitive data such as passwords.

Advantech Spectre RT ERT351 Versions 5.1.3 and prior logins and passwords are transmitted in clear text form, which may allow an attacker to intercept the request.

The Customer's Tomedo Server in Version 1.7.3 communicates to the Vendor Tomedo Server via HTTP (in cleartext) that can be sniffed by unauthorized actors. Basic authentication is used for the authentication, making it possible to base64 decode the sniffed credentials and discover the username and password.

DTEN D5 before 1.3 and D7 before 1.3 devices transfer customer data files via unencrypted HTTP.

Jenkins SCTMExecutor Plugin 2.2 and earlier transmits previously configured service credentials in plain text as part of the global configuration, as well as individual jobs' configurations.

An issue was discovered on Weidmueller IE-SW-VL05M 3.6.6 Build 16102415, IE-SW-VL08MT 3.5.2 Build 16102415, and IE-SW-PL10M 3.3.16 Build 16102416 devices. Sensitive Credentials data is transmitted in cleartext.

ELOG 3.1.4-57bea22 and below is affected by an information disclosure vulnerability. A remote unauthenticated attacker can access the server's configuration file by sending an HTTP GET request. Amongst the configuration data, the attacker may gain access to valid admin usernames and, in older versions of ELOG, passwords.

IBM API Connect 5.0.0.0 through 5.0.8.6 could allow an unauthorized user to obtain sensitive information about the system users using specially crafted HTTP requests. IBM X-Force ID: 162162.

The Deep Security Manager application (Versions 10.0, 11.0 and 12.0), when configured in a certain way, may transmit initial LDAP communication in clear text. This may result in confidentiality impact but does not impact integrity or availability.

The handshake protocol in Object Management Group (OMG) DDS Security 1.1 sends cleartext information about all of the capabilities of a participant (including capabilities inapplicable to the current session), which makes it easier for attackers to discover potentially sensitive reachability information on a Data Distribution Service (DDS) network.

The Network Attached Storage (NAS) Administration Web Page for Iomega NAS A300U transmits passwords in cleartext, which allows remote attackers to sniff the administrative password.

A vulnerability is in the 'BSW_cxttongr.htm' page of the Netgear DGN2200, version DGN2200-V1.0.0.50_7.0.50, and DGND3700, version DGND3700-V1.0.0.17_1.0.17, which can allow a remote attacker to access this page without any authentication. When processed, it exposes the admin password in clear text before it gets redirected to absw_vfysucc.cgia. An attacker can use this password to gain administrator access to the targeted router's web interface.

Multiple LDAP injections vulnerabilities exist in SecurEnvoy MFA before 9.4.514 due to improper validation of user-supplied input. An unauthenticated remote attacker could exfiltrate data from Active Directory through blind LDAP injection attacks against the DESKTOP service exposed on the /secserver HTTP endpoint. This may include ms-Mcs-AdmPwd, which has a cleartext password for the Local Administrator Password Solution (LAPS) feature.

Quassel through 0.13.1, when --require-ssl is enabled, launches without SSL or TLS support if a usable X.509 certificate is not found on the local system.

In the JetBrains Scala plugin before 2019.2.1, some artefact dependencies were resolved over unencrypted connections.

Cleartext Transmission of Sensitive Information in /northstar/Admin/login.jsp in Northstar Technologies Inc NorthStar Club Management 6.3 allows remote local user to intercept users credentials transmitted in cleartext over HTTP.

When Connect workers in Apache Kafka 2.0.0, 2.0.1, 2.1.0, 2.1.1, 2.2.0, 2.2.1, or 2.3.0 are configured with one or more config providers, and a connector is created/updated on that Connect cluster to use an externalized secret variable in a substring of a connector configuration property value, then any client can issue a request to the same Connect cluster to obtain the connector's task configuration and the response will contain the plaintext secret rather than the externalized secrets variables.

bcrypt password hashing in Botan before 2.1.0 does not correctly handle passwords with a length between 57 and 72 characters, which makes it easier for attackers to determine the cleartext password.

An issue was discovered in certain Apple products. iOS before 11 is affected. The issue involves the "MobileBackup" component. It allows remote attackers to obtain sensitive cleartext information in opportunistic circumstances by leveraging read access to a backup archive that was supposed to have been encrypted.